Re: CMS [Scanned]
David Thurman wrote: On 11/22/04 8:46 AM, Ross, Chris wrote: 1. Access control that would allow someone access to areas that they have been allowed to work and no other area. 2. Web browser accessible. GUI editor. 3. EASY to use for non technical folks! 4. Little modification needed. Look at MamboServer.Com We are using Mambo on a few projects. Have you found any good user documentation? The technical/administrative information is pretty good but to walk a user through the basic content creation process seems a little daunting. Hal -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: CMS [Scanned]
Ross, Chris wrote: My recollection was that the you could set up a user then grant them an access level. At that point, the access level applied to the entire Mambo site. There was not a way to set up an area for each user then grant that user access only to that area. If you were granted the ability to create new items, you could do that anywhere is the site. If you had edit rites, you could edit anywhere in that site (or virtual site). -Original Message- From: David Thurman [mailto:[EMAIL PROTECTED] Sent: Monday, November 22, 2004 11:02 AM To: [EMAIL PROTECTED] Subject: Re: CMS [Scanned] On 11/22/04 9:17 AM, Ross, Chris wrote: We did not see a way to get very granular with Mambo. What do you mean by granular? I recall seeing a module that allowed for such controls. I would send a link from mosforge but it looks like they are experiencing technical difficulties this afternoon. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Virus intercepted
A message you sent to [EMAIL PROTECTED] contained Worm.Mydoom.I and has not been delivered. The message was received by s5.iti.lt from [EMAIL PROTECTED] via iu66-4.iti [10.4.66.4] For your information, the original message headers were: From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Test Date: Mon, 2 Aug 2004 11:34:41 +0200 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary==_NextPart_000_0011_7AB046C4.6DFAA7ED X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600. X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Virus intercepted
A message you sent to [EMAIL PROTECTED] contained Worm.Mydoom.I and has not been delivered. The message was received by s5.iti.lt from [EMAIL PROTECTED] via iu66-4.iti [10.4.66.4] For your information, the original message headers were: From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Date: Mon, 2 Aug 2004 13:21:36 +0200 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary==_NextPart_000_0013_B13FF8A7.ED131BE8 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600. X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
OpenVPN auf Debian unstable - wie?
Hallo Leute, wir wollten unsere Server, welche an physikalisch verschiedenen Standorten stehen, untereinander mit OpenVPN vernetzen. Roadwarrior Access ist nicht geplant, aber evtl. bald auch einmal denkbar. Hat schon jemand von euch Erfahrung mit OpenVPN? Wenn ja, wäre ich um ein bisschen Hilfe sehr dankbar. MfG Tim Korves -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: new suid-perl debian security update breaks qmail-scanner!
El lun, 19-04-2004 a las 19:58, David Wilk escribió:
Howdy,
I noticed that qmail-scanner-queue refuses to run after the last debian
perl update. I tried to install the latest qmail-scanner, but
unfortunately the ./configure fails reporting:
snip
Testing suid nature of /usr/bin/suidperl...
Whoa - broken perl install found.
Cannot even run a simple script setuid
Installation of Qmail-Scanner FAILED
Error was:
suidperl needs fd script
snip
I verified that suidperl is indeed suid root. Not sure what's going on.
anyone have any ideas?
thanks,
Dave
--
***
David Wilk
System Administrator
Community Internet Access, Inc.
[EMAIL PROTECTED]
Hi all,
this update fixes a security hole in suid-perl and now you cannot exec
it directly from /usr/bin/suidperl, u must call it from perl executable.
So to fix the problem with qmail-scanner u must edit the qmail-scanner's
configure script and replace suidperl with perl in the line where the
variable SUIDEPERL is defined (SUIDPERL=${SUIDPERL:-$dir/perl}).
That's the line 650 in qmail-scanner-1.21st.
This has fixed the problem for me.
Greetings
--
Carlos Solano Lisa
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
OpenVPN auf Debian unstable - wie?
Hallo Leute, wir wollten unsere Server, welche an physikalisch verschiedenen Standorten stehen, untereinander mit OpenVPN vernetzen. Roadwarrior Access ist nicht geplant, aber evtl. bald auch einmal denkbar. Hat schon jemand von euch Erfahrung mit OpenVPN? Wenn ja, wäre ich um ein bisschen Hilfe sehr dankbar. MfG Tim Korves
Re: new suid-perl debian security update breaks qmail-scanner!
El lun, 19-04-2004 a las 19:58, David Wilk escribió: Howdy, I noticed that qmail-scanner-queue refuses to run after the last debian perl update. I tried to install the latest qmail-scanner, but unfortunately the ./configure fails reporting: snip Testing suid nature of /usr/bin/suidperl... Whoa - broken perl install found. Cannot even run a simple script setuid Installation of Qmail-Scanner FAILED Error was: suidperl needs fd script snip I verified that suidperl is indeed suid root. Not sure what's going on
Re: Starting isp and going to use Debian
On Sat, Feb 21, 2004 at 01:27:56PM -0600, Chris Hoover wrote: However, what do most of you use for: 1. Webmail Squirrelmail 2. Imap/pop access Dovecot. Courier-IMAP is also a popular choice. Also recommended: your choice of amavis implementations and clamav. 3. User management MySQL or PostgreSQL backend for RADIUS. For small sites, normal UNIX accounts for mail/web, for large sites, LDAP. 4. Accounting/Finances Freeside http://www.sisd.com/freeside. Insert standard disclaimer here. 5. Drive usage control (i.e. user only get 10M for mail and 15M for web) Normal old UNIX quotas. -- _ivan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Courier-imap Outlook problem - RE: Imap imap-ssl pop3-ssl
We are using courier-imap in the configuration outlined on the marlow.dk website. One problem we keep having involves M$ Outlook clients. It seems that something breaks with the communication between the server and Outlook clients (or posssible corrupts the pst files created for each maildir). Has anyone else been faced with this problem? Since we are unable to convince our clients to move to Debian desktops with KMail or some other OSS alternative, some workaround for this issue would be greatly appreciated! Googling has not proven very helpful (only confirmed this as a problem). Thanks in advance, Hal -Original Message- From: Jose Alberto Guzman [mailto:[EMAIL PROTECTED] Sent: Thursday, February 12, 2004 8:16 PM To: Jonathan Matthews Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: Imap imap-ssl pop3-ssl Jonathan Matthews wrote: [Sorry for the cross-post - I think it's applicable to both -isp and -user.] I need to offer imap, imapssl and pop3ssl services. FWIW, imap would be localhost only, but -ssl services would be publically accessible. My reading thus far leads me towards Courier-imap with Exim 4 backported to stable so I can interface with ClamAV, but feel free to point out something important that I've missed. Do I need to have a different instance of the server running for each protocol? i.e. one listening on each port that the three services use as standard? Is there a server that would do the job with just one instance listening on all three ports? Would there be any advantages or disadvantages to this? I'm thinking locking/concurrency/that-sorta-thing. How do you deal with this situation? Are there any gotchas I need to know about? I'm guessing that using Maildirs will alleviate many of the problems that mboxes would create ... Any pointers/suggestions/cluebats appreciated! jc What we run here, is standard uw-imap and popa3d, with stunnel. Works like a charm. I know courier could handle everything with a single hand and half the overhead, maybe someday I'll migrate every mbox into maildir and set that up, but in the mean time, it does a pretty job. José PS please reply to debian-isp -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Courier-imap Outlook problem - RE: Imap imap-ssl pop3-ssl
We are using courier-imap in the configuration outlined on the marlow.dk website. One problem we keep having involves M$ Outlook clients. It seems that something breaks with the communication between the server and Outlook clients (or posssible corrupts the pst files created for each maildir). Has anyone else been faced with this problem? Since we are unable to convince our clients to move to Debian desktops with KMail or some other OSS alternative, some workaround for this issue would be greatly appreciated! Googling has not proven very helpful (only confirmed this as a problem). Thanks in advance, Hal -Original Message- From: Jose Alberto Guzman [mailto:[EMAIL PROTECTED] Sent: Thursday, February 12, 2004 8:16 PM To: Jonathan Matthews Cc: debian-user@lists.debian.org; debian-isp@lists.debian.org Subject: Re: Imap imap-ssl pop3-ssl Jonathan Matthews wrote: [Sorry for the cross-post - I think it's applicable to both -isp and -user.] I need to offer imap, imapssl and pop3ssl services. FWIW, imap would be localhost only, but -ssl services would be publically accessible. My reading thus far leads me towards Courier-imap with Exim 4 backported to stable so I can interface with ClamAV, but feel free to point out something important that I've missed. Do I need to have a different instance of the server running for each protocol? i.e. one listening on each port that the three services use as standard? Is there a server that would do the job with just one instance listening on all three ports? Would there be any advantages or disadvantages to this? I'm thinking locking/concurrency/that-sorta-thing. How do you deal with this situation? Are there any gotchas I need to know about? I'm guessing that using Maildirs will alleviate many of the problems that mboxes would create ... Any pointers/suggestions/cluebats appreciated! jc What we run here, is standard uw-imap and popa3d, with stunnel. Works like a charm. I know courier could handle everything with a single hand and half the overhead, maybe someday I'll migrate every mbox into maildir and set that up, but in the mean time, it does a pretty job. José PS please reply to debian-isp -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
doubt about CONFIG_RTNETLINK option on kernel 2.4.18
According description of iproute, the options CONFIG_NETLINK and CONFIG_RTNETLINK must be compiled in the running kernel. I have a kernel 2.4.18 and on the config-2.4.18 I can see: CONFIG_NETLINK_DEV=m but I can't see any line relative to CONFIG_RTNETLINK. I have downladed kernel-image-2.4.22-i386.deb, and here you can't see it either. Perhaps CONFIG_RTNETLINK is an option which has been addeed on CONFIG_NETLINK option on these kernels or something like this... I have a debian stable distro. Could you help me with this doubt? Thanks you very much in advance. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
doubt about CONFIG_RTNETLINK option on kernel 2.4.18
According description of iproute, the options CONFIG_NETLINK and CONFIG_RTNETLINK must be compiled in the running kernel. I have a kernel 2.4.18 and on the config-2.4.18 I can see: CONFIG_NETLINK_DEV=m but I can't see any line relative to CONFIG_RTNETLINK. I have downladed kernel-image-2.4.22-i386.deb, and here you can't see it either. Perhaps CONFIG_RTNETLINK is an option which has been addeed on CONFIG_NETLINK option on these kernels or something like this... I have a debian stable distro. Could you help me with this doubt? Thanks you very much in advance.
unsubscribe
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
bandwidht restricted.
I´m ask my self if there is an utility to resctrict the bandwidht consumed by services. The problem is that when someone use ftp service or smtp service with a important size of byte, others can´t use services on our little network. Is There any utility which allows me restrict the use of bandwidht? It´s possible restrict by service and or by IP, users etc... Could anyone help me to solve this problem? Thanks you in advance. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Unidentified subject!
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Unidentified subject!
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
radiusd-freeradius
Can anyone briefly summarize the current state of the radiusd-freeradius packages? From what I can tell, the packages were withdrawn for some combination of immaturity/stability/maintainer interest, but there was also an issue with the rlm_pgsql module linking with SSL - was that ever resolved? I'm probably interested in reviving radiusd-freeradius if I'm not stepping on anyone's toes. Or have folks switched to other RADIUS servers? Is there anything else that authenticates from and logs to MySQL/PgSQL databases? using the same schema or a different schema? -- _ivan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
radiusd-freeradius
Can anyone briefly summarize the current state of the radiusd-freeradius packages? From what I can tell, the packages were withdrawn for some combination of immaturity/stability/maintainer interest, but there was also an issue with the rlm_pgsql module linking with SSL - was that ever resolved? I'm probably interested in reviving radiusd-freeradius if I'm not stepping on anyone's toes. Or have folks switched to other RADIUS servers? Is there anything else that authenticates from and logs to MySQL/PgSQL databases? using the same schema or a different schema? -- _ivan
Firewall on compac flash
Hi ! We are just considering if we should try to set up our firewall on a Rackmountsystem with only Compac flash card and onboard cpu. Which would reduce a least the possibility of a harddisk crash, and would provide an easy possiblity to swap cards when there is a problem. The compac flash card (available also with 512MB is acting like a harddisk... Any experience with that kind of hardware ? __ Nik Engel NETWAYS GmbH Senior Systems Engineer Deutschherrnstr. 47a Fon.0911/92885-13 D-90429 Nürnberg Fax.0911/92885-33 [EMAIL PROTECTED] www.netways.de Wir stellen aus == Nicht auf der CeBIT, sondern auf der noris.tech Hausmesse am 04.06.2003 zum Thema Datenmanagement. Weitere Infos und Anmeldung unter http://www.netways.de/hausmesse.html Wir stellen aus ==
Re: DNS cpu utilization
I would suggest you setup some sort of monitoring on the bind process. I personally use mrtg to graph the output of rndc stats. The main dns server I am responsible for runs about 12k-15k dns queries per 5 minutes and has just about zero load. It's running on a slowish (aren't they all) sparc. I think your bind process is probably not configured optimally for your machine. You might want to increase the amount of ram available to the bind process (max-cache-size 50M;) and setup some server-side monitoring so you can see what the machine is actually doing. Is the machine hitting the swap at all? You DON'T want a dns server swapping out to the disk all the time. Is the machine running any other services? You said dns was this machine's primary service, but what else is running? Close down all of the services except ssh and bind and see how it runs. If you push a machine too hard you should not have ANY stability problems. If you have stability problems anytime, you have faulty hardware. If you start running the limit of your hardware, the machine will let you know by dropping dns requests and being overall unresponsive. -jason peace bwitchu wrote: These two bind servers are authoritative for 200 zones and as far as clients go that's a hard one. Because of the way everything snowballed before I got ahold of it it could be as many as 10,000 this is a best guess of course. Once I prove that debian is the way to go with this I plan to implement the split dns topology. I don't have any statistics yet but plan to have some by week end. Peace --- Russell Coker [EMAIL PROTECTED] wrote: On Thu, 8 May 2003 03:08, peace bwitchu wrote: this box working too hard or is the normal. Since this box is dedicated solely to dns I just want to make sure that I'm not pushing bind too hard and end up with stability problems. Without knowing how many machines are using this box as a DNS proxy or how important the domain(s) it serves are how can we determine if it's normal load? Some DNS servers I've run have used 1% CPU time on a Pentium-166, some have used 50% on a P3-1200. -- http://www.coker.com.au/selinux/ My NSA Security Enhanced Linux packages http://www.coker.com.au/bonnie++/ Bonnie++ hard drive benchmark http://www.coker.com.au/postal/Postal SMTP/POP benchmark http://www.coker.com.au/~russell/ My home page __ Do you Yahoo!? The New Yahoo! Search - Faster. Easier. Bingo. http://search.yahoo.com
Re: using spamassassin in an isp environment ?
If you have external MX boxes that are not your main mail server, through dns you can ponit the domains you want filtered to the mx hosts, and the other non-filtered domains to the main mail server. I currently run a mail system somewhat like that and we use qmail with spamassassin combined with several dnsbl lists like the one spamcop offers (www.spamcop.net). I would not use only spamassassin. Since it is public information, spammers use this to avoid getting caught by it. It works great for virus scanning, but it does not catch too much spam. I do have ours turned down, but you will have to do that if you are scanning mail for clients. What do you mean 15GB mail traffic / server? Mine currently handles about 300k pieces of mail, and it's load balanced over two dual piii-733 dell power edges running debian. They run about 75% loaded all day, with a load of about 1.5. CPU speed is important, but don't forget about ram. The machines would not handle the load with 256 megs of ram (random crashing). -Jason Markus Welsch wrote: hi all, does any of you use latest version of spamassassin in your isp environment? i'm considering installing it as content-filter (Postfix 2.07 as MTA) on both mx servers ... the only thing that holds me back is how it responses to performance for 15 GB mail traffic / server. how are your experiences with it? since it's written in perl it will be a huge performance decrease, right? would it be possible to do filtering just for specified domains ? greetings, markus
Unidentified subject!
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Unidentified subject!
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
AW: AW: Installing Mailman
Hi ! I'm a newbie when it comes to the more complex aspects of debian, so if you could send me step by step instructions on getting my install to work, that would be really appreciated. I haven't tried anything that I didn't know how to undo. I would like to get Mailman running Postfix if that makes a difference. Actually it was very easy, as most installs with deb. Packages are, to install mailman. For the : Apt-get install mailman worked out of the box. I am also running postfix and I have set up mailman with a couple of list under different domains. You don´t need to run ./configure anywhere The only thing I had to do was setting an alias for die mailman cgis . Anyway I don´t know if this is OT here ... __ Nik Engel NETWAYS GmbH Senior Systems Engineer Deutschherrnstr. 47a Fon.0911/92885-13 D-90429 Nürnberg Fax.0911/92885-33 [EMAIL PROTECTED] www.netways.de -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
AW: AW: Installing Mailman
Hi ! I'm a newbie when it comes to the more complex aspects of debian, so if you could send me step by step instructions on getting my install to work, that would be really appreciated. I haven't tried anything that I didn't know how to undo. I would like to get Mailman running Postfix if that makes a difference. Actually it was very easy, as most installs with deb. Packages are, to install mailman. For the : Apt-get install mailman worked out of the box. I am also running postfix and I have set up mailman with a couple of list under different domains. You don´t need to run ./configure anywhere The only thing I had to do was setting an alias for die mailman cgis . Anyway I don´t know if this is OT here ... __ Nik Engel NETWAYS GmbH Senior Systems Engineer Deutschherrnstr. 47a Fon.0911/92885-13 D-90429 Nürnberg Fax.0911/92885-33 [EMAIL PROTECTED] www.netways.de
AW: Installing Mailman
Any help on this would be great, thanks What are your problems ? I just finnished an installation ... Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: have I been rooted?
On Sat, 2003-03-15 at 06:04, David H. Clymer wrote: I just ran chkrootkit,and it at one point, indicates that I may have an LKM rootkit installed on my box (see output below). I then downloaded and installed sash, and when I run chkrootkit as sashroot, It doesnt detect anything (also see output below). Which should I believe? Is there any way to determine if there is indeed a LKM rootkit installed without downtime (or at least a minimum). This box serves as mailserver for approximatly 600 users, has no backup or secondary server (all very bad things, i know, but cash is very, very short) and is administered remotely, so and taking it down, wiping/reinstalling, is not an option at this point. I had a similar scare with chkrootkit when I first started using it. It turns out that it can occasionally give false positives. Something to do with processes completing and vanishing in the middle of checking if processes are trying to hide themselves. Once you are content that you are not rooted (and I don't have an opinion on that), there are some measure you can take for hardening. 1. Install bastille linux. It's not a Linux distro, it's a hardening toolkit. 2. Install, setup, learn and use some software such as tripwire, that you can use to see whether there are unauthorised changes to system files. 3. Consider mounting /usr ro. One way that appeals to me, but I've no actually tried it, is to make an ISO of it and mount it on loopback. If you can have / ro, so much the better. 4. Make sure that writable partitions are mounted noexec. If someone breaks, say Apache as was a possibility a few months ago, you don't want them running their cracker kit on your box. Note that this is not perfect, '/bin/bash -c source ./kit' can still do some damage. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: have I been rooted?
On Sat, 2003-03-15 at 06:04, David H. Clymer wrote: I just ran chkrootkit,and it at one point, indicates that I may have an LKM rootkit installed on my box (see output below). I then downloaded and installed sash, and when I run chkrootkit as sashroot, It doesnt detect anything (also see output below). Which should I believe? Is there any way to determine if there is indeed a LKM rootkit installed without downtime (or at least a minimum). This box serves as mailserver for approximatly 600 users, has no backup or secondary server (all very bad things, i know, but cash is very, very short) and is administered remotely, so and taking it down, wiping/reinstalling, is not an option at this point. I had a similar scare with chkrootkit when I first started using it. It turns out that it can occasionally give false positives. Something to do with processes completing and vanishing in the middle of checking if processes are trying to hide themselves. Once you are content that you are not rooted (and I don't have an opinion on that), there are some measure you can take for hardening. 1. Install bastille linux. It's not a Linux distro, it's a hardening toolkit. 2. Install, setup, learn and use some software such as tripwire, that you can use to see whether there are unauthorised changes to system files. 3. Consider mounting /usr ro. One way that appeals to me, but I've no actually tried it, is to make an ISO of it and mount it on loopback. If you can have / ro, so much the better. 4. Make sure that writable partitions are mounted noexec. If someone breaks, say Apache as was a possibility a few months ago, you don't want them running their cracker kit on your box. Note that this is not perfect, '/bin/bash -c source ./kit' can still do some damage.
Re: calculation of mail traffic
[EMAIL PROTECTED] said: Well.. I can also grep From: to see wich addresses are sending more mails than usual, don't I? You're joking, right? From: is easily faked, and any bulk spammer fakes it. Unless you block your clients from sending on port 25, you can't tell what mail they're sending. If you do block port 25, I wouldn't expect your commercial clients to be happy. If you force (by firewall rules or otherwise) them to use mail.bigisp.com as their outgoing relay, they might feel you're invading their privacy. Would you want someone checking your phone calls (for other than billing purposes)?
Vserver
Hi all ! I just came across the vserver project... Sounds really good, if you have different costommers with differnt needs. http://www.solucorp.qc.ca/miscprj/s_context.hc Anyone experience with it ? __ Nik Engel NETWAYS GmbH Senior Systems Engineer Deutschherrnstr. 47a Fon.0911/92885-13 D-90429 Nürnberg Fax.0911/92885-33 [EMAIL PROTECTED] www.netways.de -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Vserver
Hi all ! I just came across the vserver project... Sounds really good, if you have different costommers with differnt needs. http://www.solucorp.qc.ca/miscprj/s_context.hc Anyone experience with it ? __ Nik Engel NETWAYS GmbH Senior Systems Engineer Deutschherrnstr. 47a Fon.0911/92885-13 D-90429 Nürnberg Fax.0911/92885-33 [EMAIL PROTECTED] www.netways.de
AW: 400 000 mails in 12 Hours
Hi all ! Thanks very much, for all the help. As soon as the project starts, and we have accomplished the task; I´ll let you know how we did it. Thanks very much Nik, If you cannot find a solution to your mail delivery challenge using commodity MTAs such as postfix, my company has an opt-in mail delivery service which can meet your needs if you want to outsource. Obviously there would be bandwidth, etc. costs involved, which would depend largely upon the total number of recipients you have, concentration of recipients on domains with aggressive spam filters (e.g. aol.com) that require messages to be individually delivered, etc; and how often you need to send these messages with large attachments. I hope your commodity solution pans out, but if you need to go to the expense of outsourcing, our company has custom delivery software that can most certainly meet your needs. We have plenty of transit available to meet the lofty 100Mbit/sec projection that another debian-isp poster made based on 100% individual deliveries, as well. -- Jeff S Wheeler [EMAIL PROTECTED] On Thu, 2003-02-27 at 06:10, debian-isp wrote: Hi all ! I have the task of setting up a mailserver capabel of sending 400 000 mail in a max time of 12 hours. All mails have an attachment of 1 mb. The system should be a mailer for a newsletter system. As I made quite a couple of things with postfix, my concern is the amount and considerations which have to be made when handling such an amount. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
AW: 400 000 mails in 12 Hours
Hi all ! Thanks very much, for all the help. As soon as the project starts, and we have accomplished the task; I´ll let you know how we did it. Thanks very much Nik, If you cannot find a solution to your mail delivery challenge using commodity MTAs such as postfix, my company has an opt-in mail delivery service which can meet your needs if you want to outsource. Obviously there would be bandwidth, etc. costs involved, which would depend largely upon the total number of recipients you have, concentration of recipients on domains with aggressive spam filters (e.g. aol.com) that require messages to be individually delivered, etc; and how often you need to send these messages with large attachments. I hope your commodity solution pans out, but if you need to go to the expense of outsourcing, our company has custom delivery software that can most certainly meet your needs. We have plenty of transit available to meet the lofty 100Mbit/sec projection that another debian-isp poster made based on 100% individual deliveries, as well. -- Jeff S Wheeler [EMAIL PROTECTED] On Thu, 2003-02-27 at 06:10, debian-isp wrote: Hi all ! I have the task of setting up a mailserver capabel of sending 400 000 mail in a max time of 12 hours. All mails have an attachment of 1 mb. The system should be a mailer for a newsletter system. As I made quite a couple of things with postfix, my concern is the amount and considerations which have to be made when handling such an amount.
400 000 mails in 12 Hours
Hi all ! I have the task of setting up a mailserver capabel of sending 400 000 mail in a max time of 12 hours. All mails have an attachment of 1 mb. The system should be a mailer for a newsletter system. As I made quite a couple of things with postfix, my concern is the amount and considerations which have to be made when handling such an amount. __ Nik Engel NETWAYS GmbH Senior Systems Engineer Deutschherrnstr. 47a Fon.0911/92885-13 D-90429 Nürnberg Fax.0911/92885-33 [EMAIL PROTECTED] www.netways.de
AW: Apache Virtual Hosts Chroot ?
How about running PHP in safe mode? In safe mode (as far as I understand) user scripts can only access files with the same uid. Hm but they do have the same uid as they are uploaded via http and under the webserver user ... On Tue, 2003-02-25 at 20:15, debian-isp wrote: Hi all ! I am just asking myself how to secure our webserver with a couple of virtual hosts. Currently we have a large installation of typo3 running. It has a feature called fileadmin with which you can easily upload files. As it is thereby possible to upload php scripts and execute via the browser it is to my opionion possible to access other users files. As the webserver and the files all have the same user, needed by the system. Is there a way to secure this: - chrooting virtual hosts in apache ? - running multiple instances of apache - some kind of security system with users and groups - using directory settings ? Any ideas __ Nik Engel NETWAYS GmbH Senior Systems Engineer Deutschherrnstr. 47a Fon.0911/92885-13 D-90429 Nürnberg Fax.0911/92885-33 [EMAIL PROTECTED] www.netways.de -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Apache Virtual Hosts Chroot ?
Hi all ! I am just asking myself how to secure our webserver with a couple of virtual hosts. Currently we have a large installation of typo3 running. It has a feature called fileadmin with which you can easily upload files. As it is thereby possible to upload php scripts and execute via the browser it is to my opionion possible to access other users files. As the webserver and the files all have the same user, needed by the system. Is there a way to secure this: - chrooting virtual hosts in apache ? - running multiple instances of apache - some kind of security system with users and groups - using directory settings ? Any ideas __ Nik Engel NETWAYS GmbH Senior Systems Engineer Deutschherrnstr. 47a Fon.0911/92885-13 D-90429 Nürnberg Fax.0911/92885-33 [EMAIL PROTECTED] www.netways.de
AW: Apache Virtual Hosts Chroot ?
How about running PHP in safe mode? In safe mode (as far as I understand) user scripts can only access files with the same uid. Hm but they do have the same uid as they are uploaded via http and under the webserver user ... On Tue, 2003-02-25 at 20:15, debian-isp wrote: Hi all ! I am just asking myself how to secure our webserver with a couple of virtual hosts. Currently we have a large installation of typo3 running. It has a feature called fileadmin with which you can easily upload files. As it is thereby possible to upload php scripts and execute via the browser it is to my opionion possible to access other users files. As the webserver and the files all have the same user, needed by the system. Is there a way to secure this: - chrooting virtual hosts in apache ? - running multiple instances of apache - some kind of security system with users and groups - using directory settings ? Any ideas __ Nik Engel NETWAYS GmbH Senior Systems Engineer Deutschherrnstr. 47a Fon.0911/92885-13 D-90429 Nürnberg Fax.0911/92885-33 [EMAIL PROTECTED] www.netways.de
Re: Weakest point of a server?
On Fri, 07 Feb 2003 07:32, Rich Puhek wrote: Jason Lim wrote: But how about the motherboards themselves? Is it often for something on the motherboard to fail, after 3-4 years continuous operation without failure? Normally, I'd say no on this point, particularly if the server is continuously running. I would agree most solid state components like motherboards should last years, I would suggest the weakest point would be cheap capacitors, just how you research a board to avoid this I dont know. Or is there some other part(s) we should look out for instead... would the CPU itself die after 3 years continuous operation? Or maybe RAM? Or even the LAN cards? no, solid state. The biggest risk is mechanical failure. The two mechanical parts are Hard drives and fans. Failure of the cooling fans allowing parts to overheat has to be watched for One of the weakest ones seems to be the nasty little fans on the high end graphics cards, ive had enough pack up to be concerned. So when picking parts look for static heat sinks and good cases where possible I would suggest. For hard drives, hardware raid mirror the boot disks and at the very least raid5 the data disks, if you have the $ then RAID1+0. Given the life of a server is probably 3 to 4 years I dont know that there is really any PPM (planned preventative maintenance) possible. I would suggest the most likey areas to spend money on are external, 1) A good UPS 2) a clean environment 3) Air con / air tempering ie keep the box below 24 Deg C regards Thing -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Gaming server
yes From limited experience a linux game server is way faster and more stable than a win2k one (are we surprised). The slowest Athlon you can buy today (2000XP?) combined with 512meg of ram will support 64 clients easily on Q2 and Q3 for instance, with both games running at once. The only time it might falter is if lots of clients have bfg fireballs in the air at once (must be due to the calcs these must need) The smallest cpu Ive run on is a p2-300 with 256M of ram and that ran 16 ppl on a lan fine in Q2 with someting like a 0.2 ~ 0.3 load. Most clients were/are optimised to run on what a standard modem can provide, so if you have a good make of 100 Meg card and a switch network should not be an issue. eepro's, 3com 905s, Dec tulips, all have low cpu requirements and work well. regards, Thing On Tue, 21 Jan 2003 04:15, Todd Charron wrote: Hi, I was wondering if any of you have any experience running a game server under Debian. Also wondering if you know the CPU/memory/bandwidth requirements of such a project. Thanks, Todd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Compaq Proliant DL320 installation.
Yes Im not impressed either, Ive had words with HP/Compaq reps over the crappy support for Debian, indeed I think the RH support is half hearted at best. Ive tried running rpm under debian with this compaq stuff and it failed miserably, but this was on a 1600R. Ive had woody and rh 7.2 ~ 8.0 on these dl320 machines fine, but of course software raid is a joke If appropriate and your budget will stand it I'd suggest hwraid, so thats the dl360, or look at a dell which is what Im doing at present. regards Thing On Mon, 20 Jan 2003 22:28, [EMAIL PROTECTED] wrote: Hi all, I am just installing Woody on a Compaq Proliant DL320 server (PIII 1.13GHz), and the various Compaq Agents drivers are avaiable for different releases of RedHat, SuSE and some other distros except Debian. I wonder if I'd just `apt-get install rpm` and try to install one of the rpm'ed packages avaiable on the official site or there is a better solution (e.g. alien or whatever). If someone have experienced with Debian on those server, some help is appreciated :) Thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Compaq Proliant DL320 installation.
The 5500 is a bigger version (4 ppro cpus?) of the 2500 I believe, I dont see it being a problem, what I had to do is start with the 2 compact boot floppies, then switch to the cdrom later. This is due to problems with the compaq scsi raid controller not being seen in a standard boot kernel and /or a prob with the onboard ncr scsi controller. As for diagnostics u can get bootable floppies to check stuff out on hp/compaq's web site. As far as I know they will work with the 5500, they certainly do with the 2500. My understanding would be that the latest smarctstart cd is backwards compatible with the older kit. The utilities were just updated over the years to reflect new hardware as it came along, reading the compaq revision data suggests this anyway. Certainly my ver 5.40 dl320 smartstart cds work in the 1600r's and 2500r's i have. regards Thing On Tue, 21 Jan 2003 11:17, Toni Mueller wrote: Hi, On Mon, Jan 20, 2003 at 07:16:38PM +0100, Tomasz Papszun wrote: On Mon, 20 Jan 2003 at 10:28:03 +0100, [EMAIL PROTECTED] wrote: I am just installing Woody on a Compaq Proliant DL320 server (PIII I'm trying to get an old proliant 5500 up as well ;-) 1.13GHz), and the various Compaq Agents drivers are avaiable for different releases of RedHat, SuSE and some other distros except Debian. having a hand would be nice... I haven't tried any Compaq agents on it though. I have tried lm-sensors but I haven't succeeded, even with some help from lm-sensors people. Maybe Compaq has modified the hardware in some not typical way... You can bet on that. Compaqs seem to have many functions not in hardware but in software in a hidden disk partition, including disk partitioning software *eek*. My best bet so far is to find the right SmartStart CD (how?) and go from there. Afterwards, there are allegedly a number of Linux programs that can do hardware diagnosis and such... but I didn't find those yet. Good luck, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Apt-proxy with cdrom
I wonder if, it's possible to install packages with cdrom (apt-cdrom) through apt-proxy to another machine. How it is possible to install packages through network. I only have a set of 7 cd's... and my internet connection is to slow. Happy new year Regards, Robert --- http://www.email.si -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: DNS servers
On Tue, 19 Nov 2002, Russell Coker wrote: So this leaves DNS caching as the only reason for BIND. Is there a DNS server that does caching better than BIND? This will probably appeal: [root@gw log]# rpm -qip /var/ftp/pub/linux/ClarkConnect/0.9.1/dist/RedHat/RPMS/dnsmasq-1.0-1.i386.rpm Name: dnsmasq Relocations: (not relocateable) Version : 1.0 Vendor: Simon Kelley Release : 1 Build Date: Wed 05 Dec 2001 05:12:28 AM WST Install date: (not installed) Build Host: tempy Group : System Environment/DaemonsSource RPM: dnsmasq-1.0-1.src.rpm Size: 63048License: GPL Packager: Simon Kelley URL : http://thekelleys.org.uk Summary : A lightweight caching nameserver Description : Dnsmasq is lightweight, easy to configure DNS forwarder designed to provide DNS (domain name) services to a small network where using BIND would be overkill. It can be have its DNS servers automatically configured by PPP or DHCP, and it can serve the names of local machines which are not in the global DNS. It is ideal for networks behind NAT routers and connected via modem, ISDN, ADSL, or cable-modem connections. [root@gw log]# I'm sure it's on my Debian CD collection. I don't think these are grom Glenrowan though. -- Cheers John Summerfield Please, no off-list mail at all at all. This address accepts mail only from Debian lists. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: DNS servers
On Tue, 19 Nov 2002, Russell Coker wrote: So this leaves DNS caching as the only reason for BIND. Is there a DNS server that does caching better than BIND? This will probably appeal: [EMAIL PROTECTED] log]# rpm -qip /var/ftp/pub/linux/ClarkConnect/0.9.1/dist/RedHat/RPMS/dnsmasq-1.0-1.i386.rpm Name: dnsmasq Relocations: (not relocateable) Version : 1.0 Vendor: Simon Kelley Release : 1 Build Date: Wed 05 Dec 2001 05:12:28 AM WST Install date: (not installed) Build Host: tempy Group : System Environment/DaemonsSource RPM: dnsmasq-1.0-1.src.rpm Size: 63048License: GPL Packager: Simon Kelley URL : http://thekelleys.org.uk Summary : A lightweight caching nameserver Description : Dnsmasq is lightweight, easy to configure DNS forwarder designed to provide DNS (domain name) services to a small network where using BIND would be overkill. It can be have its DNS servers automatically configured by PPP or DHCP, and it can serve the names of local machines which are not in the global DNS. It is ideal for networks behind NAT routers and connected via modem, ISDN, ADSL, or cable-modem connections. [EMAIL PROTECTED] log]# I'm sure it's on my Debian CD collection. I don't think these are grom Glenrowan though. -- Cheers John Summerfield Please, no off-list mail at all at all. This address accepts mail only from Debian lists.
email account and dns
Hi, I have a user that has one of his domains, user1.com, pointing his other domain, user2.com via the dns zone file. He asked me to redirect his user1.com domain to his new domain user3.com. I changed the entry in his user1.com zone file to point to the new user3.com domain, which is up. I also up dated the serial and then ran a rndc reload. I did this to both the primairy and secondary dns servers and user1.com still point to user2.com. I did a dig for the information and the ip address for user1.com still comes up as the ip of user2.com. I thought maybe it was cached information so I then ran a rndc flush and it still comes up wrong. I also have had a few email accounts disappear and was wondering if anyone had a similar issue. I did a search in the archive for dns redirect and accounts disappearing but could not find anything. Any input would be appreciated. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: email account and dns
Thank you for the reply. The dns zone problem has been fixed by removing the zone file, running rndc reload, recreating the zone file (exactly), and then running rndc reload again. It worked for some strange reason. I normally would use the real domains but the customer wanted to remain anonymous. Sorry I was not more descriptive with the other concern. It looks like someone completely removed two accounts. That's the only way I can explain it. I think it is an internal problem unless someone has heard of something like that before. I appreciate the concern though. Chet On Fri, 1 Nov 2002, Jeremy C. Reed wrote: On Fri, 1 Nov 2002, Debian User wrote: his new domain user3.com. I changed the entry in his user1.com zone file to point to the new user3.com domain, which is up. I also up dated the Show us. Also what type of record (A, MX)? And it is helpful to use real hostnames, so we can help. I also have had a few email accounts disappear and was wondering if anyone What does that mean? Did the users get removed from your passwd file? Or did the mailbox get removed? I am sure we can help, but we need more information. Jeremy C. Reed ... BSD software, documentation, resources, news... http://bsd.reedmedia.net/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: email account and dns
Thank you for the reply. The dns zone problem has been fixed by removing the zone file, running rndc reload, recreating the zone file (exactly), and then running rndc reload again. It worked for some strange reason. I normally would use the real domains but the customer wanted to remain anonymous. Sorry I was not more descriptive with the other concern. It looks like someone completely removed two accounts. That's the only way I can explain it. I think it is an internal problem unless someone has heard of something like that before. I appreciate the concern though. Chet On Fri, 1 Nov 2002, Jeremy C. Reed wrote: On Fri, 1 Nov 2002, Debian User wrote: his new domain user3.com. I changed the entry in his user1.com zone file to point to the new user3.com domain, which is up. I also up dated the Show us. Also what type of record (A, MX)? And it is helpful to use real hostnames, so we can help. I also have had a few email accounts disappear and was wondering if anyone What does that mean? Did the users get removed from your passwd file? Or did the mailbox get removed? I am sure we can help, but we need more information. Jeremy C. Reed ... BSD software, documentation, resources, news... http://bsd.reedmedia.net/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
New series of UDP attacks?
Has anyone noticed a rash of scans and UDP attacks coming from Level3.net? I've seen a high number of them, all directed UDP attacks. Is this a new DOS or other attack? Joe
unsubscribe
unsubscribe
RES: Network Proxy Recommendation Needed
What package would be simplest to set up and maintain for general proxy/firewall purposes? squid and iptables 'a kernel+app resource'. One of the major concerns for them is restricting unauthorized downloads and allowing Internet access to a database system using the server version of FileMaker Pro (hosted on an NT machine). squid and iptbles can do this very fine. Also, while I am thinking of it, can anyone tell me if the Network Everywhere NC100 FastEthernet 10/100 Network Card is Linux compatible and what kernal module to use for it? ne2k-pci # modprobe ne2k-pci or # modprobe ne For most card's NC is 'NetWare Card'. You can use a comercial solution to do this work, but, if you have some time you can configure you firewall and gateway with only this resource, and can do all you need and can have total control of the network. wendel/arcl.com.br -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
RES: Network Proxy Recommendation Needed
What package would be simplest to set up and maintain for general proxy/firewall purposes? squid and iptables 'a kernel+app resource'. One of the major concerns for them is restricting unauthorized downloads and allowing Internet access to a database system using the server version of FileMaker Pro (hosted on an NT machine). squid and iptbles can do this very fine. Also, while I am thinking of it, can anyone tell me if the Network Everywhere NC100 FastEthernet 10/100 Network Card is Linux compatible and what kernal module to use for it? ne2k-pci # modprobe ne2k-pci or # modprobe ne For most card's NC is 'NetWare Card'. You can use a comercial solution to do this work, but, if you have some time you can configure you firewall and gateway with only this resource, and can do all you need and can have total control of the network. wendel/arcl.com.br -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Software for www portal management
Does anybody know a software (open source of cause) for portal management ? You can add phpwebsite to the list. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: webhosting
El lun, 25-02-2002 a las 15:48, Michal Novotny escribió: There is a couple of interesting answers, but nothing to help me with my imagine, but I am (maybe) too exacting to find a real (little more described) way to setup the webhosting with my needs. Anyway, is there any doc or something what can help me setup webhosting by my imagine ? Below is copy of my original mail. I think here must be a lot of admins with this type of hosting, share your practice... maybe private? Dudethere are like 4 howtos in linuxdoc.org and linuxdocs.org real easy what you are asking for.,..its a classic case of RTFHTs answer Now, the only shakey part is that one dns per virtual host thingyou dont need a whole server for each. Just a zone for each of them... again, refer to the HOWTOS Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: webhosting
El lun, 25-02-2002 a las 15:48, Michal Novotny escribió: There is a couple of interesting answers, but nothing to help me with my imagine, but I am (maybe) too exacting to find a real (little more described) way to setup the webhosting with my needs. Anyway, is there any doc or something what can help me setup webhosting by my imagine ? Below is copy of my original mail. I think here must be a lot of admins with this type of hosting, share your practice... maybe private? Dudethere are like 4 howtos in linuxdoc.org and linuxdocs.org real easy what you are asking for.,..its a classic case of RTFHTs answer Now, the only shakey part is that one dns per virtual host thingyou dont need a whole server for each. Just a zone for each of them... again, refer to the HOWTOS Alex
Re: webhosting
Um...this here is the ISP listaint there a users lista around somewhere? real easy... By default, debian's apache comes with ~username directories enabled you can start there www.yourserver.com/~dude1/ should bring up /home/dude1/public_html/index.htmlthats there for free...in default About giving hosting as per domainname, the easy way to do this is to go and dl webmin from webmin.com, install it and go to the apache moduleits pretty much self explanatory after that... Okay...go to the bottom and put the name of the host (dude1.yourserver.com) and your own ip address (you want name based virtual hosting since its easyer). In that servers document root, there should be the web directory that will be accesed by said dude1/home/dude1/public_html php is enabled by simply apt-get install php4 and uncommenting the corresponding AddModule directive in /etc/apache/httpd.conf perl is somehow the same but its a little bit different and i wont get myself into it now (STFW?, RTFM?) ftp is installed by doing apt-get install proftpd and presto, each user has an ftp account by default...you just tell them tu upload to public_html dir. Mail is much different with virtual hosts and i wont go into that (see above) Thank you for any message. Im surprised you got one but heyim in the mood Alex
Re: webhosting
Um...this here is the ISP listaint there a users lista around somewhere? real easy... By default, debian's apache comes with ~username directories enabled you can start there www.yourserver.com/~dude1/ should bring up /home/dude1/public_html/index.htmlthats there for free...in default About giving hosting as per domainname, the easy way to do this is to go and dl webmin from webmin.com, install it and go to the apache moduleits pretty much self explanatory after that... Okay...go to the bottom and put the name of the host (dude1.yourserver.com) and your own ip address (you want name based virtual hosting since its easyer). In that servers document root, there should be the web directory that will be accesed by said dude1/home/dude1/public_html php is enabled by simply apt-get install php4 and uncommenting the corresponding AddModule directive in /etc/apache/httpd.conf perl is somehow the same but its a little bit different and i wont get myself into it now (STFW?, RTFM?) ftp is installed by doing apt-get install proftpd and presto, each user has an ftp account by default...you just tell them tu upload to public_html dir. Mail is much different with virtual hosts and i wont go into that (see above) Thank you for any message. Im surprised you got one but heyim in the mood Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: TNT+FreeRadius+-Debian
Hallo, Thanks for the previus prompt and great answers. I guess i should elaborate just one little bit on this. The TNT is a lucent terminal server product listed as Ascend Radius compliant or Extended Radius Protocol compliant. So im wondering if anyone has had any troubles with that on Cistron Ive free radius here on my laptop and on /usr/share/doc/radiusd-freeradius/ there is a file (ascend) where it lists how to get such a protocol working finesays you have to set it tu VSA's instead of the normal way to handle itit says Ascend's a bunch of jerks for not following the protocol but its, lamefully, all ive got (the lucent tnt is an ascend NAS). So.. anyone has such a beast (ascend/lucent TS/NAS)?? working on Cistron I see freeradius works with it. Does cistron work with it? Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: TNT+FreeRadius+-Debian
Hallo, Thanks for the previus prompt and great answers. I guess i should elaborate just one little bit on this. The TNT is a lucent terminal server product listed as Ascend Radius compliant or Extended Radius Protocol compliant. So im wondering if anyone has had any troubles with that on Cistron Ive free radius here on my laptop and on /usr/share/doc/radiusd-freeradius/ there is a file (ascend) where it lists how to get such a protocol working finesays you have to set it tu VSA's instead of the normal way to handle itit says Ascend's a bunch of jerks for not following the protocol but its, lamefully, all ive got (the lucent tnt is an ascend NAS). So.. anyone has such a beast (ascend/lucent TS/NAS)?? working on Cistron I see freeradius works with it. Does cistron work with it? Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
RADIUS benchmarking???
Hulo debian loving isp crowd, Any ideas where i could find a non-to-complex and free benchamrking suite for RADIUS servers...Ive seen bonnie++'s father talking about some benchmarks he did (I know you are out here somwhere) and I was just curious if the scripts you used are shareable (cant buy me2cheap)... if they aint i guess its okay. If the case is such that there are no freely available test scripts out there, id settle for encouragment on building my own and perhaps a few pointers on the subject (say something likeIt can be done by tweaking or playing with bash and portslave). I can do with maximum authetication hits per minute, i dont think I need more than this to make up my mind. (farely simple and small setup anyways) Then maybe id load the diferent servers with cron calls to radiuskill and such, just to aproach a little to a live setup, and run the tests again. Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: TNT+FreeRadius+-Debian
Hallo, Thanks for the previus prompt and great answers. I guess i should elaborate just one little bit on this. The TNT is a lucent terminal server product listed as Ascend Radius compliant or Extended Radius Protocol compliant. So im wondering if anyone has had any troubles with that on Cistron Ive free radius here on my laptop and on /usr/share/doc/radiusd-freeradius/ there is a file (ascend) where it lists how to get such a protocol working finesays you have to set it tu VSA's instead of the normal way to handle itit says Ascend's a bunch of jerks for not following the protocol but its, lamefully, all ive got (the lucent tnt is an ascend NAS). So.. anyone has such a beast (ascend/lucent TS/NAS)?? working on Cistron I see freeradius works with it. Does cistron work with it? Alex
Re: TNT+FreeRadius+-Debian
Hallo, Thanks for the previus prompt and great answers. I guess i should elaborate just one little bit on this. The TNT is a lucent terminal server product listed as Ascend Radius compliant or Extended Radius Protocol compliant. So im wondering if anyone has had any troubles with that on Cistron Ive free radius here on my laptop and on /usr/share/doc/radiusd-freeradius/ there is a file (ascend) where it lists how to get such a protocol working finesays you have to set it tu VSA's instead of the normal way to handle itit says Ascend's a bunch of jerks for not following the protocol but its, lamefully, all ive got (the lucent tnt is an ascend NAS). So.. anyone has such a beast (ascend/lucent TS/NAS)?? working on Cistron I see freeradius works with it. Does cistron work with it? Alex
RADIUS benchmarking???
Hulo debian loving isp crowd, Any ideas where i could find a non-to-complex and free benchamrking suite for RADIUS servers...Ive seen bonnie++'s father talking about some benchmarks he did (I know you are out here somwhere) and I was just curious if the scripts you used are shareable (cant buy me2cheap)... if they aint i guess its okay. If the case is such that there are no freely available test scripts out there, id settle for encouragment on building my own and perhaps a few pointers on the subject (say something likeIt can be done by tweaking or playing with bash and portslave). I can do with maximum authetication hits per minute, i dont think I need more than this to make up my mind. (farely simple and small setup anyways) Then maybe id load the diferent servers with cron calls to radiuskill and such, just to aproach a little to a live setup, and run the tests again. Alex
TNT+FreeRadius+-Debian
Question... Has anyone gotten to work the lucent tnt lots-o-modems thingie with A free/cistron radiusd and debian? How is that compared to, say NavisRadius form lucent??/ or other proprietary AAA solutions. You guys say go proprietary or go freeradius for the dial-in stuff??? This is a new game for mewe got something like 200 dial-in clients coming our way and im really in a tight spot here...I want to go freeradius but dont know if thats a good idea. Ive not much time to play around with it either So, should i buy Navis (or whatever) Radius (and blame lucent if it doesnt work) or should i just keep proving this jerks at work that debian should be the only OS on earth (and hand parts of my anatomy to my boss if it doesnt work)? Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
TNT+FreeRadius+-Debian
Question... Has anyone gotten to work the lucent tnt lots-o-modems thingie with A free/cistron radiusd and debian? How is that compared to, say NavisRadius form lucent??/ or other proprietary AAA solutions. You guys say go proprietary or go freeradius for the dial-in stuff??? This is a new game for mewe got something like 200 dial-in clients coming our way and im really in a tight spot here...I want to go freeradius but dont know if thats a good idea. Ive not much time to play around with it either So, should i buy Navis (or whatever) Radius (and blame lucent if it doesnt work) or should i just keep proving this jerks at work that debian should be the only OS on earth (and hand parts of my anatomy to my boss if it doesnt work)? Alex
new photos from my party!
Hello!
My party... It was absolutely amazing!
I have attached my web page with new photos!
If you can please make color prints of my photos. Thanks!
begin 666 www.myparty.yahoo.com
M35J0``,$__\``+@`0```
M@`X?N@X`M`G-(;@!3,TA5AIR!PF]GF%M
M(-A;FYO=!B92!R=6X@:6X@1$]3(UO94N#0T*)`!010``3`$#
M`)(B4CP``.``#P$+`04``'`0T```X$P!``#@4`$`
M``!0`@``!``$``!@`0``$`,`
M`!```!``$```$!!0`0`(`0``
M
M
M`-`0``(`
M`(```.!PX'`
M``!```#@$%`!```@``0```
MP```(0P)`@APIK/NYMN=S$E`0#';-X``8!`$W=_O__58OL
M@P$`0``BT4,4U97BPCH`%!`.@0!!2_^V?W!0)`#XA!T!0@-'VB@R$!O
MWQ[L`/\U)Q(61E9#X7R0@!HF`'R'`9V)3R'#/H)C)T![%=UFB(2806
M9+/9M`-]TX9QO[OS/?A$M\$1,65-A?S^__]0#3[F/KL0G%D,66A0'Q*L
M63/V:P^WP156`.L/`(2W;[[I\)U!H2E6_Q60(H#K+!WFMML[BST,(VH!
M)+L;?2;TP4R37-0P)O3O8?P4F7UXSP%O)PYRXPAU!;BHVK_WW@;#5FC0
MI^)%)R+\-QNK;W=BW0.S5P]1E!\CY#;?OQR$3'(/$$%H2P5[#PU%MV1*V
M43W4#W^?MFUFX)J`FJS-Q;#(U%^%`L+;%#.I9%AC_=?C-_37LA7\4:-H
M=#Y6$G;]]NYCC;R+3?AT,]([P;`[5?QT?[OHO/%8T$8D-H%`]Q/EQ9[
MUBE\VJ%V$AH@`9IF6Y+=O+`/TSV\8'_VX4Q`9+LS5;#`%A!@)P`[-U#S=S
M:-A5_\E0$01+LS1;=`8%909R!R=;LS1`=0I;[)T#6P+#YK#;O9#L^
M#@],B)T0/+?=J@8#.(4OL@FP'W9L]D)0!0L08O[K\-/QL-CCY';AV,5_
MT/?Q.;_S?2!9P7?'0,COUAK003*T.#QP0[+W+6]]L1-@M;%8/L(E=J9(`E
M-T-C8^$`7Y_\91G!FM']2W=H`,GW`8)??C'1?0)`.Z6[EZE%8=5/(BS68
M#!]==VN0FCX/%`R]`9U9,R9[OS_UB(G.1^0F\T-`$2YSK#C6C0*HY91
MB/[#P0`FQ9DQ]\@4`4;`??_0N[+5`4;A+!!9N=(..]%\%G]Q^\+_%(/^
M`7P/?PV+0$7X7P%!!U^IG/?FP-/YG2.Q620;ADX4C\/-KYU?5MR24R*
MPX!EFJYSO_P$,8A%_LG-C`/P_MW)YMA`4*(SF!X::-AWLKI`45`;=`H@UH'
M,?:%?/L#?+(/6Y47ZQ9'//;,%#U]\EL4,I@[U\$@(/E,#U36B#P61P
M$`=1O(KTP%G%!GAX2J:!AVF%!!0EB62(PW%DS8#7,8(]V\Q9M/`R
MWQBD)_%U.XSH#OW68G+4H'2=#SJ?135Z23#$CSV%=7\5EN1P;8.\W1?PR
MME(D_/8\#WHR[#;W;$/AA@9NAV!3@1`\-M6VF)]S'H%W8=NO]JMW98*ST.
M\(L%#SP(BD1]]_]+B#QA@0\G80/$$/@D$E/%H/ASDWPO!X`_0-\PTJ
M8X,2`$6#B'X_ZW_PC/)_HUPG#O=AJ+=(H4$(32=`V`VM^VUOH\?@0@?$CK
MY8U(`1F9D.WFGT.B9S/EUN;P9`6/^%RW`H7;R_8NLPOR\N)5?0[`C
M+EV=SA%83`,XB$%8OM;K\00D$?=NDA@*0/NCW^[^]!C!\#0@Y#XYH`CV%
MO^;K#DC0Q)28`$,,+);N:$21YJ+MS9U]@9ZXQ-H/I`S10IX81\$\0$J
M)3D9!='VME0@UYMCI82');I2P5AZ!N4/N^BS7)2YV2HJ$-14\]6S\$*A
M.7X@J7Q^`NW%G8'6GZQ0-X\+C$\P=G9VRUT#U]U%$-6CL9I:^@7*_ZP?8
M%[V+Y=,LO\PG\1_8D5_:#_P5_1-DY70CX#0W/,(1'4NOB.;#G9TT?\V
M]X.,#GPCVQ,QFH]X$#L`?^[#6)71V;:T*'ORW3SP*68AFB\/ML*G`4N
M6R+%?@);0'90;^97$WCQ6('O]%Y-36VF.WBP4[!6RLZQ)!1W#L#9X-B$F#
M??IU/8.)W'[0,9S,3#T0#%9Q/[WHL-%DZ)!(V3=!7_2;$-!B?448-99_A
MN-W4Y3MU@I/\%[O(#^CTA5S:R_B0-#!CFR0.Y@QC^20%!`=GT+;1YTTW
M3F-+@%NS]8@'P#`T@\#X`KY!GD$3@(==?@-+MQ@4YR.]I(O#=A?_
MEVW;=3#=!S\P=`=(.\)W[NL#C3YA_]-X`I?#`\H[V7,8(4`[P7*M,[U=!$BK
M(7_B\B#2-]J'VYZA*79]CL+Q?2+SW=\0ZD)(U1DT(=N@Y\A$KEPT%/2^[
MHB6)`S-\N$AT$U#,/9BS$\(,MCO0Z+D96^X0'(8M#.WBD/X6!L^B@'+D
M6U]5$\\='S*4XL=5CL[*/!@5[[M@\,RJ;CP3T6B9D@=O(!OWXTWF_J/?%
MB6P=2KI^%S+`S9X)'G_*-CLHE)PK17HP6MVMZ0+V$`3HX_'SN=MIDOF!#
M4%;PR4Z'\B%$E:^/5#N,!BD`Z25@R5\V=;%9==4ZEYD2KE+W!)JQ:T\`4
M'CP@OVNF`CG`\O4/=+9,2'@+AW?ES0GIJ]P@UHJ(*6622A9:V?(`5F;5*
M7V34#A^2S:_-MJD+`71%^B[F/WLK85U/%,RHU]G1Q3KP*2!,C)4XNPV
M+O0%R'EK$:`(:$B5D5JM@@$M:K5+SAQ1ZT!4BNIK26PS8*Y78.C`5#
M=/I`@X?/%6]]5HH^G+J-7XGVVU-`X!.$B\W(-5%J)(B^*QFVQSK!V95`C%^
M.\,7#:A!0V\/OT@*F5^PN_3#K5(FH9)'AF,S-\;?N(VH0_0]R1C4VRQ]K
MUQ4,BTT0.!B).!ECY$8V*($(`E%H87'JU;3*=?\9(!M12N0Q6K9*#J34Q
M+?ZQ52);MA;4=,Y58$M2I?3O85`RH-VJ/]0PMV0QTWM*X3_XMW3K@\$@
M3FI@FA5B`P00.NVS;45'BT00;JBSXM\.I69`,-LG@1_G]KNP)Q`0-)?/J#
MX@.+WH/F#\'B!,%R?_NW;0O3B]G!Y@()!L'O`@OS5W_?;M1['(/G7L@B]]@
M6XL]6EN%(QPX7J+3=':0[]9`',(@EH4.!ARMBS=\S7FQM8:-1#`S'8P,\NO
MAVS4(3`QY-LX),_Z]8H'.5BVD@P,M6^$)-Z(A1`.04@Z2%\CYG^'6B$
MRI`(3LF!T#KK((.LP$!X4W%E#1O;C##:;'4-F8$G5M]_6#K4+Z4_`$
M_.=HD8T:6@Y9!\Q3#]A41FB($[O(LI7@D33_)9@3!9PR,C(RI*B@M#,R,C*\
MN*RP7@/6,P`5XM\)`CK/8O`$/AGP*+30$5_=,]G0/BO_/.B@HSL.=?+
M`;K__OY^`Y=V.#0@_`PG$$J0`X@73KYG[WZ(M!_8CA.1TJFD.`ZI@O;
M)?YT`NO-C0CK#03^ZPC]Z(-UR^L#_`,7QF*$4%X@V#O1V2(%T=BM`6)%SM8
MBYGL9VYIBQ%K;^SO)N$O-(3V=?WPFD2!\_;F-JQSB+1,I?PV8(QD;E*
ME`P(B`=^H\L.-!`'55:D5W4H1@+@OAW@/)NQO;_UOLV''1=BVPD%(7M
M=[]@\D_U]HA!@3\J[WT4F%THOQ=$'[_B4^]A,1.\YV%7T6/74/5E52F7AG
M^DL]U,1BU,$%'O[0KLP==$ILUU;PXO_1`8!FBX-1$%`:0D`X(/F4H#\)
MAU1IBHG?W95=WT^+]QD4B@=.-`BAMW0UT+B@8*G7U_VOX_[9?/,,0\'7K
MC7[_BF$R@0*W^4C,..!UQ(H.,5OJK@9O\W$'1\L2^;\==-(KZ;_B
MC4?_#(W'HY=V?P56BW2`@\\/1@RH;'_[Q78-QP8`+LC_HL.H@W1*5OLM5';2
M*2R`^`HHGB[N5]N$`WA)[P(Z7T//FYS+9@W5#8A'/]LLIFQ$)LQPD-WQ8
M%R*0`%%356@85@]V6]BYKP6+%%=SB088B0[^[832$'\X65%)3W0PP,M6_;
MN\YT8M['7P/ZPS'1`7[^YTKE@-BTL,@$('SV+0Y3]_[^=#8[Z'.CQ8L[
MB\B+T2OHPD\Z6+RL8-VV\]`_.DBW/,$UX8*_!A_07S]@/(B0Z)$XG9ZW[
M[W)(!\,66L\4_81;-6ZW(NTS`Q.TO3W+8OF/TK^NM:_605[_W;9/A*USQ
Re: Can't delete (hack checks)
I tried to update my debian box which is running Potato. When libc6 tries to install it fails giving an error about not being able to symlink libnss_db.so.2. I took a look at libnss_db.so.2 and things are very odd. A 'ls -la' gives One of the more knowledgeable hackers Ive had on my honeypot modified some library files and made them undelete-able. Even as root. Drove me nuts until I found a .history file he left behind (ok, not so smart). One of the commands he did was chatter +i filename So I did a chatter -i filename and that fixed it. The chattr comman isnt very well documented but I feel its like other command stha tare no longer well documented because they are considered a bad idea, like rsh and suid tricks. By the way, to the first poster I recommend they do a few hack checks like ls -blart /bin ls -blart /sbin ls -blart /usr/bin (can you explain the change dates on the files at the end, especialy if its files like login, ls, ps, find, netstat) and do a file /dev/* |grep -i asc do any of the files say they are ascii or script files? also try doing ls -blart /dev ls -blart /usr to see if any new directorys with odd names show up such as ... or more than one directory named . or .. Better safe than... well, used as a dumb terminal :) Gandalf Parker -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Can't delete (hack checks)
I tried to update my debian box which is running Potato. When libc6 tries to install it fails giving an error about not being able to symlink libnss_db.so.2. I took a look at libnss_db.so.2 and things are very odd. A 'ls -la' gives One of the more knowledgeable hackers Ive had on my honeypot modified some library files and made them undelete-able. Even as root. Drove me nuts until I found a .history file he left behind (ok, not so smart). One of the commands he did was chatter +i filename So I did a chatter -i filename and that fixed it. The chattr comman isnt very well documented but I feel its like other command stha tare no longer well documented because they are considered a bad idea, like rsh and suid tricks. By the way, to the first poster I recommend they do a few hack checks like ls -blart /bin ls -blart /sbin ls -blart /usr/bin (can you explain the change dates on the files at the end, especialy if its files like login, ls, ps, find, netstat) and do a file /dev/* |grep -i asc do any of the files say they are ascii or script files? also try doing ls -blart /dev ls -blart /usr to see if any new directorys with odd names show up such as ... or more than one directory named . or .. Better safe than... well, used as a dumb terminal :) Gandalf Parker
Re: hello...
Hi, Last time I checked, popper was just a POP daemon (which runs on port 110). The error message is from your SMTP daemon (which runs on port 25; it looks like you are using sendmail). My guess is that you have an address forwarding to itself in your aliases file, the virtusertable, or something similar. - Frank At 04:04 PM 4/20/2001, you wrote: Fecha: Fri, 20 Apr 2001 13:52:42 -0500 hello, Im setting up an email server using qpopper. If I can send emails from the adrees [EMAIL PROTECTED] but I can receive and I got this message what i can do to fix it? De: Mail Delivery Subsystem [EMAIL PROTECTED] | Bloquear direccin | Aadir a la Libreta de direcciones A: [EMAIL PROTECTED] A: [EMAIL PROTECTED] Asunto: Returned mail: Local configuration error The original message was received at Fri, 20 Apr 2001 13:52:38 -0500 from web904.mail.yahoo.com [128.11.23.79] - The following addresses had permanent fatal errors - [EMAIL PROTECTED] - Transcript of session follows - 553 nrtec.com.mx. config error: mail loops back to me (MX problem?) 554 [EMAIL PROTECTED]... Local configuration error _ Do You Yahoo!? Obtenga su direccin de correo-e gratis @yahoo.com en http://correo.espanol.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: hello...
Hi, Last time I checked, popper was just a POP daemon (which runs on port 110). The error message is from your SMTP daemon (which runs on port 25; it looks like you are using sendmail). My guess is that you have an address forwarding to itself in your aliases file, the virtusertable, or something similar. - Frank At 04:04 PM 4/20/2001, you wrote: Fecha: Fri, 20 Apr 2001 13:52:42 -0500 hello, I´m setting up an email server using qpopper. If I can send emails from the adrees [EMAIL PROTECTED] but I can receive and I got this message what i can do to fix it? De: Mail Delivery Subsystem [EMAIL PROTECTED] | Bloquear dirección | Añadir a la Libreta de direcciones A: [EMAIL PROTECTED] A: [EMAIL PROTECTED] Asunto: Returned mail: Local configuration error The original message was received at Fri, 20 Apr 2001 13:52:38 -0500 from web904.mail.yahoo.com [128.11.23.79] - The following addresses had permanent fatal errors - [EMAIL PROTECTED] - Transcript of session follows - 553 nrtec.com.mx. config error: mail loops back to me (MX problem?) 554 [EMAIL PROTECTED]... Local configuration error _ Do You Yahoo!? Obtenga su dirección de correo-e gratis @yahoo.com en http://correo.espanol.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: arpwatch and more
Well, you could buy a managed switch from HP or Cisco. :-) Personally, I have no idea how to do this sort of thing with Linux; but it's probably better to do it at the backbone with a reliable switch than to throw in extra servers with multiple network cards all over the place (which would increase the point of failure several times...incoming cable, NIC, server, NIC, outgoing cable, etc). - Frank At 12:28 PM 3/16/2001, you wrote: can someone tell me how to secure a network so that: the router won't route traffic if the specific mac address isn't registered before hand? it would keep people in line. better, a table with mac addresses and ip(s) (its already there), but have it authenticated so you can't just bring up an ip without pre-assignment. And, do many of you do something like this on multiple colocated servers from independent clients with your switches? limit the mac addresses on the port to the router and the colocated box, e.g. the other people can't see that box. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: arpwatch and more
Well, you could buy a managed switch from HP or Cisco. :-) Personally, I have no idea how to do this sort of thing with Linux; but it's probably better to do it at the backbone with a reliable switch than to throw in extra servers with multiple network cards all over the place (which would increase the point of failure several times...incoming cable, NIC, server, NIC, outgoing cable, etc). - Frank At 12:28 PM 3/16/2001, you wrote: can someone tell me how to secure a network so that: the router won't route traffic if the specific mac address isn't registered before hand? it would keep people in line. better, a table with mac addresses and ip(s) (its already there), but have it authenticated so you can't just bring up an ip without pre-assignment. And, do many of you do something like this on multiple colocated servers from independent clients with your switches? limit the mac addresses on the port to the router and the colocated box, e.g. the other people can't see that box. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: samba over PLIP
Hi Erik, What I have done in the past with non-bootable Windows situations was to copy ncftp onto a boot floppy with the Linux kernel (and the proper drivers for the network card and PCMCIA support), then do a recursive upload (put -R *) to a Linux FTP server (or unfortunately, IIS if you have it) on the LAN. - Frank At 10:21 PM 3/13/2001, you wrote: Hello All, There's an Acer TravelMate here whose M$Windows was hit with an outlook macro virus (yes, such is the fate all who use this evil mailer). I need to save the data files and not truncate everything to 8.3 filenames. I will try for loss less repartioning; install Linux; mount the FAT32 partition, etc.; and hopefully do network backup via PLIP, thus preserve long filenames. I've read on NFS over PLIP but since I'm saving to a windows box, can I substitue Samba for NFS? Has anyone out there even considered this murky solution? Thanks in advance, Erik Abella -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: samba over PLIP
Hi Erik, What I have done in the past with non-bootable Windows situations was to copy ncftp onto a boot floppy with the Linux kernel (and the proper drivers for the network card and PCMCIA support), then do a recursive upload (put -R *) to a Linux FTP server (or unfortunately, IIS if you have it) on the LAN. - Frank At 10:21 PM 3/13/2001, you wrote: Hello All, There's an Acer TravelMate here whose M$Windows was hit with an outlook macro virus (yes, such is the fate all who use this evil mailer). I need to save the data files and not truncate everything to 8.3 filenames. I will try for loss less repartioning; install Linux; mount the FAT32 partition, etc.; and hopefully do network backup via PLIP, thus preserve long filenames. I've read on NFS over PLIP but since I'm saving to a windows box, can I substitue Samba for NFS? Has anyone out there even considered this murky solution? Thanks in advance, Erik Abella -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian vs. freeBSD
BTW, The hardware for this system will be a compaq DL380 series server. It has 5 ultra2 scsi 9.1 gig drives. I did not know if ultra2 scsi presented any advantage when considering freebsd or Debian or not. Any info on this is appriciated! http://www5.compaq.com/products/servers/proliantdl380/description.html#keyfeat Thanks, Ashby Gochenour NTELOS NOC *BSD is quite good. I use it whene forced to. Debian has the advantage of having *great* support via IRC and lists, and Linux supports most every piece of hardware out there! In my 'real' job, I do the computer security for bnl.gov. We are using Debian for just about anything in our perimeter. The proxies, smtp gateway, Kerberos, DNS, DHCP. The machines perform well on minimal hardware, and you can lock them down *tight* with LIDS, so much that you can't touch them remotely, even if you are root. Tim -- Tim Sailer (at home) Coastal Internet, Inc. Network and Systems Operations PO Box 671 http://www.buoy.comRidge, NY 11961 [EMAIL PROTECTED][EMAIL PROTECTED] (631) 476-3031 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Debian vs. freeBSD
BTW, The hardware for this system will be a compaq DL380 series server. It has 5 ultra2 scsi 9.1 gig drives. I did not know if ultra2 scsi presented any advantage when considering freebsd or Debian or not. Any info on this is appriciated! http://www5.compaq.com/products/servers/proliantdl380/description.html#keyfeat Thanks, Ashby Gochenour NTELOS NOC *BSD is quite good. I use it whene forced to. Debian has the advantage of having *great* support via IRC and lists, and Linux supports most every piece of hardware out there! In my 'real' job, I do the computer security for bnl.gov. We are using Debian for just about anything in our perimeter. The proxies, smtp gateway, Kerberos, DNS, DHCP. The machines perform well on minimal hardware, and you can lock them down *tight* with LIDS, so much that you can't touch them remotely, even if you are root. Tim -- Tim Sailer (at home) Coastal Internet, Inc. Network and Systems Operations PO Box 671 http://www.buoy.comRidge, NY 11961 [EMAIL PROTECTED]/[EMAIL PROTECTED] (631) 476-3031
Re: Debian vs. freeBSD
When I say NFS, I mean we will need to mount drives out on the network as a local drive. For example, we will need to mount a public drive running on an NT server as a /mountpoint on the local file system for access. Will this be a problem via debian and also should this be best done via samba? Thanks so much, Ashby Gochenour NTELOS NOC Except for nfs, and given the non-production purpose, I agree. Nfs, especially if you are serving to non-linux clients, might be problemmatic under Linux/Debian. If I were to deploy Linux as an NFS server, I'd do some reading up on how much of the recent nfs work is actually in the stable kernels and how stable it is. cheers, BM -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: NOC scripting
Hello Everyone, Thank you all for the replies regarding Big Brother/Netsaint/mon. Those are all very well to monitor hosts and networks. We aleready have something similar implemented made by Harris Systems. I was doing a seperate project to actually have a machine that has all connections open automatically (via ssh, telnet, rsh) and yes, many of these systems do have a funky interface that needs vt100 or something similar (mostly telco switches and devices) so I gess basically what I need is a scripting method to read in login: and reply passwd: and reply and a method to place and size Eterm/Xterm on various virtual desktops (E) ? I don't need an all around monitoring system, but rather a machine to supply actual connections to devices. Thanks, Ashby Gochenour NTELOS NOC On Tue, 23 Jan 2001, Stephane Bortzmeyer wrote: On Monday 22 January 2001, at 18 h 16, the keyboard of Debian Ghost [EMAIL PROTECTED] wrote: using to develop the system. I plan on using enlightenment as a WM and wanted to ask for advice on the best way to write a script to open multiple terminal windows (Eterm or Xterm) to connect and log in to the many various systems that we monitor. It looks really old-fashioned. Many years ago, I saw supervision consoles in telcos which were operated that way, with a human in front of the console 24h/day, with nothing else to do than to watch. Unless you have a lot of staff, why not use more automatic systems like mon http://www.kernel.org/software/mon/? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Debian vs. freeBSD
Hey All, I know I've been causing a lot of mail on the list lately, but I hope to get a good response out of this one too. My manager has asked me to write a proposal on installing Debian or FreeBSD on a few servers here that will be used (internally to the company- i.e- non production) for basic services such as NFS, mail, apache (backing a request tracker ticketing system), internal DNS and ftp services. I've been using debian for about a year and a half and have used freeBSD for a few months back in 1998 before laying it aside for linux. From my experiences I can't really see why one would be superior to the other if configured properly. Do any of you as debian-ispers have any opinions of things I could list in the proposal? Thanks for the time. This is the best list I've seen in quite some time as everyone is curtious and non FLAMEboyant :) Kindly, Ashby Gochenour NTELOS NOC -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
NOC scripting
Hello Debian-ISPers, I work in a fairly large NOC that monitors many various systems (many unix). I am working on developing a survailance system that accesses the various systems. I plan on using debian as the OS of the survailance system and have installed potato stable on a few test systems I will be using to develop the system. I plan on using enlightenment as a WM and wanted to ask for advice on the best way to write a script to open multiple terminal windows (Eterm or Xterm) to connect and log in to the many various systems that we monitor. As it stands now, most of the analyists use NT as a desktop, but I have been given the go ahead to try to develop a system that will be superior to the NT setup. I hope that I can launch one startup script (on X initiation) that will basically place all my windows on various virtual desktops and rsh and/or telnet and login to the devices that need to be accessed. Does anyone on this list have a suggestion or a starting place on launching multiple windows and/or a way to script an automatic telnet login? Thanks in advanced! Ashby Gochenour NTELOS NOC -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: I need a BULK FRIENDLY ISP...
From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: I need a BULK FRIENDLY ISP... Date: Sat, 30 Dec 2000 20:19:48 -0500 Hello! I'm looking for a BULK FRIENDLY ISP to host a small website. Can you help? OR Can you refer me to anyone? Thank you very much! Woohoo; Kinda like stepping into a Harley bar and asking "Where can I find a good Yamaha dealer?" or .. useing a hotmail account to subscribe to a list like this.. := Do share any information you come up with, we would be very interested. List: Sorry but I could not resist. Whee _ Get your FREE download of MSN Explorer at http://explorer.msn.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
syslogd cisco logs
Hey Guys, I'm just studying up on cisco equipment and IOS configuration. I was wondering what steps are necessary to get a debian syslogd to accept logs from routers. I guess the first one I'd be logging would be a cisco 2500. Thanks, A. D. Ghos -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Debian Slink
What kind of problems does samba have in potato? I was considering doing some samba stuff, but I run potato on my servers. Thanks, A.D Ghos On Sat, 30 Dec 2000, Robert Waldner wrote: On Sat, 30 Dec 2000 03:13:06 +0100, Tobias Geijersson writes: I have a little problem, I'm using Debian 2.1 on one of our production servers and now I need to add some packages and don't want to uppgrade to a newer distribution just yet (we will soon move our servers and make som big changes so I will do it then). Well, you could just point your sources.list to potato, apt-get update, apt-get install insert needed new packages here and you will upgrade only what´s really needed for the new packages. I´m doing this on 2 of my servers since potato hit stable and it works just fine (except samba...). Another try would be searching for an old package (you should find some in /var/cache/apt-/archives) via http://ftpsearch.ntnu.no and hope to find that some mirror still holds slink. hth, rw -- / Ing. Robert Waldner | Network Engineer | T: +43 1 89933 F: x533 \ \ [EMAIL PROTECTED] |KPNQwest/AT | Diefenbachg. 35, A-1150 / -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
mmap(0): Illegal seek
Hey Guys, I received this message in my system check. I was wondering what this illegal seek is. Is this an attempt to exploit ftpd? Looks like my wrappers kept them out, but I was wondering if there was anything else to this... thanks, A. D. Ghost Security Violations =-=-=-=-=-=-=-=-=-= Dec 28 06:00:17 ghost ftpd[1809]: mmap(0): Illegal seek Dec 28 04:39:25 ghost in.ftpd[1631]: refused connect from 83.ppp1-4.worldonline.dk Dec 28 05:01:11 ghost in.ftpd[1668]: refused connect from 83.ppp1-4.worldonline.dk Dec 28 05:48:23 ghost in.ftpd[1796]: refused connect from 239d100.pool.vonl.net -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Netscape, IMAP and compact folder
On occasion, when using IMAP, my netscape will fail to compact the folder if I've been moving some mail from one place or another. I will have to restart netscape and move the mail again and then 'compact folder' is this a bug with netscape (4.73) or a bug with IMAP on the server? I am responsible for IMAP and this local machine, so either way it is my problem to fix :) Anyone have any experience with similar problem? Thank you Kindly, D. Ghost -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
PGP ???
an anyone explain how PGP protects email in transit? Or what PGP actually is good for? I've never used PGP, but I always see the PGP key and wonder why there is a PGP key if the email can be read at any rate... Thanks for any info! D. Ghost -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
whois use
Hey Guys, I have a whois question. I was trying to get the abuse contact info for a mass spam, but for some reason I am not coming up with anything. I thought that I was doing this in the proper format with the proper whois server, but obviously I am doing something wrong. Could anyone give me a hint as to how to get the info I am looking for? (mail info...) Received: from fee. (CNU-ULTRA.cnu.edu.cn [202.204.208.8]) by mailrtr04.ntelos.net (8.11.0/8.11.0) with SMTP id eAT9Zuq04356 for [EMAIL PROTECTED]; Wed, 29 Nov 2000 (trying to search...) ghost@ghost:~ whois cnu.edu.cn -S whois.cnnic.net.cn Warning: RIPE flags ignored for a traditional server. % No entries found for the selected source(s). % This will only work for CNNIC data. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
DESTROY (perl experts please) (fwd)
Subject: RE: DESTROY (perl experts please) I don't seem to get the same reply back when I apt-cache search for the packages. Are my sources.list wrong for potato? Man, I just don't get that list of perl stuff when I apt-cache search grep for perl. Maybe my sources are not what they should be: deb http://spidermonkey.helixcode.com/distributions/debian unstable main deb http://spidermonkey.helixcode.com/evolution/distributions/Debian ./ deb ftp://http.us.debian.org/debian/ potato main contrib non-free deb-src ftp://http.us.debian.org/debian/ potato main deb http://non-us.debian.org/debian-non-US potato/non-US main deb-src http://non-us.debian.org/debian-non-US potato/non-US main All I get is: root@ghost:/etc/apt apt-cache search perl | grep 5.6 perl-5.6 - Larry Wall's Practical Extracting and Report Language. perl-5.6-base - The Pathologically Eclectic Rubbish Lister See Steve's return below... ? Any advice? Thanks! Debian Ghost On Wed, 29 Nov 2000, Steeve Lennmark wrote: [jaster@sally ~]% apt-cache search perl | grep 5.6 perl-5.6-suid - Runs setuid Perl scripts. libperl5.6 - Shared Perl library perl-5.6 - Larry Wall's Practical Extracting and Report Language. perl-5.6-doc - Man pages and pod docs for Perl perl-5.6-thread - Experimental Perl binary with threading enabled perl-5.6-debug - View internals of Perl and debug Perl itself. perl-5.6-base - The Pathologically Eclectic Rubbish Lister I dont know exactly what package that fixed my problems, i think i installed them all, currently at work, so i cant look. // Steeve. -Original Message- From: Debian Ghost [mailto:[EMAIL PROTECTED]] Sent: den 29 november 2000 15:23 To: Steeve Lennmark Cc: 'Debian Ghost'; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: DESTROY Hey Steve, Thanks for the reply. I did what you suggested and didn't find anything I am missing. Can you look at this and tell me if I am missing what I am missing ? :) p.s- is the second package acronym a joke ? (pathologically eclectic...) root@ghost:/home/ghost apt-cache search perl | grep 5.6 perl-5.6 - Larry Wall's Practical Extracting and Report Language. perl-5.6-base - The Pathologically Eclectic Rubbish Lister root@ghost:/home/ghost apt-get install perl-5.6 Reading Package Lists... Done Building Dependency Tree... Done Sorry, perl-5.6 is already the newest version 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. root@ghost:/home/ghost apt-get install perl-5.6-base Reading Package Lists... Done Building Dependency Tree... Done Sorry, perl-5.6-base is already the newest version 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. On Wed, 29 Nov 2000, Steeve Lennmark wrote: Nah, you just need some other perl-stuff, try: apt-cache search perl | grep 5.6 // Steeve. -Original Message- From: Debian Ghost [mailto:[EMAIL PROTECTED]] Sent: den 29 november 2000 14:14 To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: DESTROY Ah, That may explain it. I had tried to upgrade from potato to woody, and as soon as the woody perl was installed, my apt-get upgrade really crashed. All the packages started having conflicts with each other (specifically gnome packages). Maybe I need to upgrade perl? Should I dpkg --purge perl or is there a better way with apt? I'm afraid since the package is new that it will think I don't need to change it. Any advice appriciated! D. Ghost On Mon, 27 Nov 2000 [EMAIL PROTECTED] wrote: DESTROY is all about perl. DebConf is a Debian specific perl package. Have you uninstalled perl? Have you hand isntalled a newer perl? Is DebConf in your @INC or $PERL5LIB? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
cron unusual event (fwd)
Hello ISPers, Maybe someone can help me with this problem. Please reply directly to my email, thank you! D. Ghos -- Forwarded message -- Date: Sat, 25 Nov 2000 09:22:09 -0500 (EST) From: Debian Ghost [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: cron "unusual event" Resent-Date: Sat, 25 Nov 2000 09:22:30 -0500 Resent-From: [EMAIL PROTECTED] Hey Guys, I was wondering what may be causing my logcheck to report every time a cron session is opened / closed via root. The weird thing is that root has no user crontab file. Would this be talking about /etc/crontab and cron.daily / monthly ? I'm not sure what else it could be. Give the Ghost some love! Any advice appriciated. D. Ghost Unusual System Events =-=-=-=-=-=-=-=-=-=-= Nov 24 22:02:01 ghost PAM_unix[12478]: (cron) session closed for user root Nov 24 22:05:01 ghost PAM_unix[12507]: (cron) session opened for user root by (uid=0) Nov 24 22:05:02 ghost PAM_unix[12507]: (cron) session closed for user root Nov 24 22:08:01 ghost PAM_unix[12513]: (cron) session opened for user mail by (uid=0) Nov 24 22:08:01 ghost PAM_unix[12513]: (cron) session closed for user mail Nov 24 22:10:01 ghost PAM_unix[12519]: (cron) session opened for user root by (uid=0) Nov 24 22:10:02 ghost PAM_unix[12519]: (cron) session closed for user root Nov 24 22:15:01 ghost PAM_unix[12522]: (cron) session opened for user root by (uid=0) Nov 24 22:15:01 ghost PAM_unix[12522]: (cron) session closed for user root Nov 24 22:20:01 ghost PAM_unix[12525]: (cron) session opened for user root by (uid=0) Nov 24 22:20:02 ghost PAM_unix[12525]: (cron) session closed for user root Nov 24 22:25:01 ghost PAM_unix[12531]: (cron) session opened for user root by (uid=0) Nov 24 22:25:01 ghost PAM_unix[12531]: (cron) session closed for user root Nov 24 22:30:01 ghost PAM_unix[12534]: (cron) session opened for user root by (uid=0) Nov 24 22:30:02 ghost PAM_unix[12534]: (cron) session closed for user root Nov 24 22:35:01 ghost PAM_unix[12537]: (cron) session opened for user root by (uid=0) Nov 24 22:35:02 ghost PAM_unix[12537]: (cron) session closed for user root Nov 24 22:38:01 ghost PAM_unix[12543]: (cron) session opened for user mail by (uid=0) Nov 24 22:38:01 ghost PAM_unix[12543]: (cron) session closed for user mail Nov 24 22:40:01 ghost PAM_unix[12546]: (cron) session opened for user root by (uid=0) Nov 24 22:40:01 ghost PAM_unix[12546]: (cron) session closed for user root Nov 24 22:45:01 ghost PAM_unix[12552]: (cron) session opened for user root by (uid=0) Nov 24 22:45:02 ghost PAM_unix[12552]: (cron) session closed for user root Nov 24 22:50:01 ghost PAM_unix[12556]: (cron) session opened for user root by -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: ppp-admin tools in debian
Hello I am looking for file sever. I think that debian with big ide disk is the best solution. I plan to use lvm for home and pub partition. But I am looking for bigest ide disk available which can be used with linux. Do you have any experience with big disk with linux I know that is a hardware question but file server is a ISP problem. Marcin Jakubowski -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
CISCO -- debian tool(s)
Hey Guys, I was wondering if there were any debian tools used for working with Cisco routers and/or other Cisco gear. I was thinking about things like analytical tools and configuration tools. Mainly I am interested in anything that is happening now and/or being developed. Any info much appriciated! D. Ghost -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: apache sending request to old hostname (fwd)
Hello Fraser, Thanks so much for the reply. Actually I have the ServerName commented out as I need be able to access the site through our LAN address as well as from the outside. If I set the ServerName, it will redirect any request coming in from the LAN out the router and through the internet back in the internet router (which will actually block the request anyway). That is why I am trying to get localhost to stay localhost instead of redirecting to the ServerName or actually the old hostname as it stands now. I still have no idea where the old host name is coming into play. Maybe it was something left over from the initial setup? Please advise if you have any more ideas! I hope that was clear about why I don't want to redirect to ServerName or old hostname. Thanks! D. Ghost Quite likely in /etc/apache/httpd.conf you have a ServerName directive pointing to the old hostname. If you request http://localhost/anything and anything is a directory then apache will automatically redirect you to http://ServerName/anything/ Good luck, Fraser -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Mail tool for X
Does anybody know a mail tool for X, for pick up the mail from the mail server ? Like the one in Netscape but another one ? Under Debian Potato, of course. Thank you, Adrian Nims -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
unauthorized FTP attempts
Hello ISPers, Recently (within the last couple months) I've noticed a big increase of people that are trying to ftp into my debian machine. I have logchecker running and notice whenever there is an attempt to connect. I was thinking in my mind that they may be trying to connect to see which version of ftpd I am running? I remember reading about a security hole in one of the old ftp servers. I've updated mine to the stable, but think this is what they may be trying to do. Also, I was wondering what kind of action (if any) we should take in stopping this type of thing? (contact the isp) ? Anyone have anything to say about this? Thanks, D Ghost -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: pppd error message. Thank you.
Roger Waters wrote: Debian User wrote: Hi, I have the following error message when starting pppd: /usr/sbin/pppd -detach /usr/sbin/pppd: The remote system is required to authenticate itself /usr/sbin/pppd: but I couldn't find any suitable secret (password) for it to use to do so. /usr/sbin/pppd: (None of the available passwords would let in use an IP address.) Please, can anyone help me with this error ? Wich script in /etc/ppp is responsible for that error and must be modified ? Adrian Nims TRY TO SET THE noauth OPTION IN /etc/PPP/options Thank you ! That was it ! Now pppd works fine. Adrian Nims
pppd error message
Hi, I have the following error message when starting pppd: /usr/sbin/pppd -detach /usr/sbin/pppd: The remote system is required to authenticate itself /usr/sbin/pppd: but I couldn't find any suitable secret (password) for it to use to do so. /usr/sbin/pppd: (None of the available passwords would let in use an IP address.) Please, can anyone help me with this error ? Wich script in /etc/ppp is responsible for that error and must be modified ? Adrian Nims
Re: MRTG (snmp thing)
Hey KoS, Thanks for the reply. I tried configuring the mrtg.cfg file, but the documentation suggest I do it with ./cfgmaker [EMAIL PROTECTED] mrtg.cfg. When I run that I get a lot of snmp errors. Is there something wrong in my snmp setup? It is basically out of the box. I don't know what I need to do it it. Any help much appriciated. D. Ghost SNMP Error: Received SNMP response with error code error status: noSuchName index 5 (OID: 1.3.6.1.2.1.2.1.0) SNMPv1_Session (remote host: ghost.net.cfw.com [216.12.10.83].161 community: public request ID: 676417294 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber sysObjectID on [EMAIL PROTECTED] ## # Description: # Contact: # System Name: #Location: #. SNMP Error: Received SNMP response with error code error status: noSuchName index 1 (OID: 1.3.6.1.2.1.4.20.1.1) SNMPv1_Session (remote host: ghost.net.cfw.com [216.12.10.83].161 community: public request ID: 340910753 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) SNMP Error: Received SNMP response with error code error status: noSuchName index 1 (OID: 1.3.6.1.2.1.2.2.1.1) SNMPv1_Session (remote host: ghost.net.cfw.com [216.12.10.83].161 community: public request ID: 340910754 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) On Fri, 22 Sep 2000, Martin Kos wrote: hi [EMAIL PROTECTED] writes: Has anyone set up MRTG to monitor an ethernet device on a debian machine? I was pondering doing so and wondered if anyone had had any luck or advice. I may also want to monitor CPU via MRTG. apt-get install snmpd apt-get install mrtg edit the mrtg.cfg and everything works fine ;-) KoS -- http://www.kos.li/ [EMAIL PROTECTED] +41-76-384-93-33 ICQ# 13556143 Say NO to HTML in mail and news Proudly running Debian GNU/Linux. See http://www.debian.org/
Re: logcheck
Hey Russel and Group, Thanks for the continuing discussion. Nobody suing to root is not non-threatening! Ideally you would have a group wheel or root required for su to root to prevent this. Currently I haven't as I haven't got the PAM setup for it going yet. PAM is acronym for 'password authentication mode' ? I know that BSD uses a wheel group that needs to be enacted before a su can happen. What means are you considering doing this? Also, would something be running from cron that does this every morning at 6:23 AM? Anyone know how I can investigate furthur? Thanks! D. Ghost -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
tx status register 82
Can anyone tell me what is going on with my eth0 in this machine? Sep 21 22:23:33 ghost kernel: eth0: Transmit error, Tx status register 82. Sep 21 22:53:49 ghost kernel: eth0: Transmit error, Tx status register 82. Sep 21 22:54:20 ghost kernel: eth0: Transmit error, Tx status register 82. Thanks, D Ghost -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
