problem compiling kernels
Hi, I'm new to Debian and fairly new to Linux. I compiled some kernels (I'm using kernel 2.2.17) for terminals in a network (so I removed everything they don't need from the kernel except the network stuff, etc.) I compiled them on my laptop b/c it's a lot faster. Anyway I did the following after I made the configuration with menuconfig: 'make dep && make clean && make bzImage && make modules && make modules_install' Well then I moved the kernels to these machines and everything worked out fine!! But now, when I boot the original kernel on my laptop I get these errors while booting: depmod: *** unresolved symbols in /lib/modules/2.2.17/net/ppp.o depmod: *** unresolved symbols in /lib/modules/2.2.17/net/dummy.o ... now I can't use my modem using ppp anymore b/c when I start 'pon' I get this: ioctl(TIOCSETD(PPP)): Invalid argument(22) /usr/sbin/pppd: This system lacks kernel support for PPP. This could be because the PPP kernel module could not be loaded, or because PPP was not included in the kernel configuration. If PPP was included as a module, try '/sbin/modprobe -v ppp' -->'modprobe -v ppp' fails too. I don't know why this is happening b/c everything was working fine before I started compiling kernels. I don't know if 'make modules_install' is the cause for this but I guess it is. (I don't have a lot of experience in compiling kernels) Can anybody tell what causes this and how I can avoid this in the future? TIA Philipp
2 kernels on the same machine
Hi, Can I use two kernels (for example 2.4 and 2.2.17) on the same machine? I mean can I use kernel 2.2.17 as the "normal" kernel I boot with and then still compile kernels in the 2.4 version (not for this computer but for others) - or will with cause more problems than it would solve? :) Will there be any problem when I have two kernel sources in /usr/src? Will there be any conflicts with the modules of either version? Does anybody know any site where I can find information about this? TIA! Philipp
problem playing audio CD's
Hi, I'm new to the multimedia things under Linux :) I have the problem that I can't play audio CD's on my computer. I've installed everyhting that's related to sound properly - so I'm able to play mp3s, *.wav,etc. with freeamp for example, but when I put in a CD (even CD's I bought, no CD-R or CD-RW) and I want to mount it I get: mount: wrong fs type, bad option, bad superblock on /dev/cdrom or too many mounted file systems Even as root I can't do it! This is how /etc/fstab looks like: /dev/cdrom /cdrom iso9660 defaults,user,noauto,ro 00 When I start 'gcd 2.91' under Gnome I get this: "Unable to open cd device. Please make sure that you are using teh correct device and that you have permission to access the device.." The cd-drive works perfectely fine with every CD (cd-rom). So it's not the cd-drive that's not working! What am I missing, or what am I doing wrong? Any ideas for a good cd-player? TIA!! Philipp
Re: problem playing audio CD's
Hi, thanks for your responses! I can now access audio-cd's BUT ONLY AS ROOT! I changed my setting in /dev to this: brw-rw 1 rootdisk 3 Oct 29 00:03 /dev/cdrom ->hdc brw-rw 1 rootdisk22, 0 Jul 5 2000 /dev/hdc I added the user (user1) to this group: # adduser user1 disk now ROOT can play CD's but not user1 - is there any other group I don't belong to? When I try to specify the device in cdcd I get 'Permission denied' (trying to add /dev/cdrom) What else can I do? BTW cdcd is working great :) (but just for root for now) TIA, Philipp Jaye Inabnit ke6sls wrote: > Philipp, > > No worries. Many have been here before :) > > You don't mount an audio cd! You just play it etc. So, under > your gnome, just fire up the cdplayer that comes with it. If you > use kde, use the cdplayer that comes with it. Just need to confinger > your device (/dev/hdb, /dev/hdc etc). > > Also, add yourself to your cdgroup. > > ~ pts/0> ls -al /dev/hdd > brw-rw1 root disk 22, 64 Feb 22 1999 /dev/hdd > YOU ARE ROOT!! on bogus > ~ pts/0> ls -al /dev/hdc > brw-rw1 root disk 22, 0 Feb 22 1999 /dev/hdc > YOU ARE ROOT!! on bogus > > Here you see it's owned by root and belongs to 'disk', so I added myself > to that group: 'adduser me disk' as root. There are also safer ways > to do this, check back with the list. > > also, I like the cdcd package for playing my cdroms in pure console mode > (no x running). 'apt-get install cdcd' will do the trick. For adjusting the > volume, I like aumix, again, 'apt-get install aumix' :) > > I really hope this helps. > > tatah > > On Wednesday 24 January 2001 10:49, Philipp Bliedung wrote: > > Hi, > > > > I'm new to the multimedia things under Linux :) > > I have the problem that I can't play audio CD's on my computer. > > I've installed everyhting that's related to sound properly - so I'm able > > to play mp3s, *.wav,etc. with freeamp for example, but when I put in a > > CD (even CD's I bought, no CD-R or CD-RW) and I want to mount it I get: > > > > mount: wrong fs type, bad option, bad superblock on /dev/cdrom or too > > many mounted file systems > > > > Even as root I can't do it! This is how /etc/fstab looks like: > > > > /dev/cdrom /cdrom iso9660 > > defaults,user,noauto,ro 00 > > > > When I start 'gcd 2.91' under Gnome I get this: > > > > "Unable to open cd device. Please make sure that you are using teh > > correct device and that you have permission to access the device.." > > The cd-drive works perfectely fine with every CD (cd-rom). So it's not > > the cd-drive that's not working! > > > > What am I missing, or what am I doing wrong? Any ideas for a good > > cd-player? > > > > TIA!! > > Philipp > > -- > > Jaye Inabnit, ARS ke6sls e-mail: [EMAIL PROTECTED] > 707-442-6579 h/m 707-268-4074 > http://www.qsl.net/ke6slsICQ# 12741145 > This mail composed with kmail on kde on X on linux warped by debian > If it's stupid, but works, it ain't stupid.
SOLVED! Re: problem playing audio CD's
Hi, I solved my "problem" :) - I just didn't log out and back in before trying to setup cdcd I also changed myself and the cd-drive to the cdrom group :) Thnaks a lot! Philipp Jaye Inabnit ke6sls wrote: > Hi Philipp, > > Did u log out, and back in? This typically takes care of that. And btw, > I just read through more of this string and I really like changing the > group to cdrom and then just adding yourself and whoever else will use > the cdrom - it's much more sanitary then adding yourself to disk. > > hth, tatah > > On Wednesday 24 January 2001 14:21, Philipp Bliedung wrote: > > Hi, > > > > thanks for your responses! > > I can now access audio-cd's BUT ONLY AS ROOT! > > I changed my setting in /dev to this: > > > > brw-rw 1 rootdisk 3 Oct 29 00:03 /dev/cdrom > > ->hdc > > brw-rw 1 rootdisk22, 0 Jul 5 2000 /dev/hdc > > > > I added the user (user1) to this group: > > # adduser user1 disk > > > > now ROOT can play CD's but not user1 - is there any other group I don't > > belong to? > > When I try to specify the device in cdcd I get 'Permission denied' (trying > > to add /dev/cdrom) > > What else can I do? > > BTW cdcd is working great :) (but just for root for now) > > > > TIA, > > Philipp > > > > Jaye Inabnit ke6sls wrote: > > > Philipp, > > > > > > No worries. Many have been here before :) > > > > > > You don't mount an audio cd! You just play it etc. So, under > > > your gnome, just fire up the cdplayer that comes with it. If you > > > use kde, use the cdplayer that comes with it. Just need to confinger > > > your device (/dev/hdb, /dev/hdc etc). > > > > > > Also, add yourself to your cdgroup. > > > > > > ~ pts/0> ls -al /dev/hdd > > > brw-rw1 root disk 22, 64 Feb 22 1999 /dev/hdd > > > YOU ARE ROOT!! on bogus > > > ~ pts/0> ls -al /dev/hdc > > > brw-rw1 root disk 22, 0 Feb 22 1999 /dev/hdc > > > YOU ARE ROOT!! on bogus > > > > > > Here you see it's owned by root and belongs to 'disk', so I added myself > > > to that group: 'adduser me disk' as root. There are also safer > > > ways to do this, check back with the list. > > > > > > also, I like the cdcd package for playing my cdroms in pure console mode > > > (no x running). 'apt-get install cdcd' will do the trick. For adjusting > > > the volume, I like aumix, again, 'apt-get install aumix' :) > > > > > > I really hope this helps. > > > > > > tatah > > > > > > On Wednesday 24 January 2001 10:49, Philipp Bliedung wrote: > > > > Hi, > > > > > > > > I'm new to the multimedia things under Linux :) > > > > I have the problem that I can't play audio CD's on my computer. > > > > I've installed everyhting that's related to sound properly - so I'm > > > > able to play mp3s, *.wav,etc. with freeamp for example, but when I put > > > > in a CD (even CD's I bought, no CD-R or CD-RW) and I want to mount it I > > > > get: > > > > > > > > mount: wrong fs type, bad option, bad superblock on /dev/cdrom or too > > > > many mounted file systems > > > > > > > > Even as root I can't do it! This is how /etc/fstab looks like: > > > > > > > > /dev/cdrom /cdrom iso9660 > > > > defaults,user,noauto,ro 00 > > > > > > > > When I start 'gcd 2.91' under Gnome I get this: > > > > > > > > "Unable to open cd device. Please make sure that you are using teh > > > > correct device and that you have permission to access the device.." > > > > The cd-drive works perfectely fine with every CD (cd-rom). So it's not > > > > the cd-drive that's not working! > > > > > > > > What am I missing, or what am I doing wrong? Any ideas for a good > > > > cd-player? > > > > > > > > TIA!! > > > > Philipp > > > > > > -- > > > > > > Jaye Inabnit, ARS ke6sls e-mail: [EMAIL PROTECTED] > > > 707-442-6579 h/m 707-268-4074 > > > http://www.qsl.net/ke6slsICQ# 12741145 > > > This mail composed with kmail on kde on X on linux warped by debian > > > If it's stupid, but works, it ain't stupid. > > -- > > Jaye Inabnit, ARS ke6sls e-mail: [EMAIL PROTECTED] > 707-442-6579 h/m 707-268-4074 > http://www.qsl.net/ke6slsICQ# 12741145 > This mail composed with kmail on kde on X on linux warped by debian > If it's stupid, but works, it ain't stupid.
problem with print server
Hi, I have a problem - I don't know how to get two printers to work with the print server. The print server is a Sercomm Fast PrintMate and the two printers are a brother HL-10V and a HP Business Inkjet 2250 PS. I got the print server working so far - I can ping, telnet and ftp to it, and it also shows the two printers (brother on Port1 and the HP on Port2 - Port3 is still free) which are on-line. Now my problem starts - how can I get something to be printed?? Before I had only one printer (the brother) connected to the server and I printed from there. Now, how do I set up lpd for the print server? What do I have to change in /etc/printcap - if any? Can anybody point me to a site about setting up print servers? Thanks a lot!!! Philipp
Re: problem with print server
I posted earlier but I didn't include a copy of /etc/printcap - so here is a copy of my /etc/printacp - maybe that helps... I'm not very familiar with setting up printers - so if anybody can give me a hint I'd appreciate it! Thanks! hpcolor|hp business inkjet 2250PS\ :lp=:\ :rm=printserv:\ :rp=L2:\ :sd=/var/spool/lpd/hpcolor:\ :af=/var/log/hpcolor-errs:\ :lf=/var/log/hpcolor-acct:\ :mx#0:\ :sh:sf: brother|brother hl-10v\ :lp=:\ :rm=printserv:\ :rp=L1:\ :sd=/var/spool/lpd/brother:\ :df=/etc/filter.ps:\ :tf=/etc/filter.pcl:\ :af=/var/log/brother-acct:\ :lf=/var/log/brother-errs:\ :pl#66:\ :pw#80:\ :pc#150:\ :mx#0:\ :sh:sf:
compiling a program
Hi, I have simple question concerning compiling a programm When I compile a program from the sources and it beakes for whatever reason, how can I get rid of all the files that were created so far or how can I remove this 'broken' program ? Is there anything like 'apt-get -f install' which is used for .deb files ? And how can I find out if a new version of a package, for example libc6, depends on any other package? For example I tried to compile a movie-player but it needed a newer version of libc6, which I don't have, so how can I find out if I need any other package for libc6 to work? (I'm still using the 2.2.17 kernel...) TIA! Philipp
Re: compiling a programm
hello, Thanks a lot for your help! But now I got myself into a strange situation - I was trying to install xlibs-package which I thought I would need for Gimp 1.2.1 but I got this when I tried to install it : #dpkg -i xlibs_4.0.2-1_i386.deb Selecting previously deselected package xlibs. dpkg: considering removing xlib6g in favor of xlibs ... dpkg: no, cannot remove xlibs6g (--auto-deconfigure will help): libsmpeg0 depends on xlib6g (>=3.3.5) xlib6g is to be removed. dpkg: regarding xlibs_4.0.2-1_i386.deb containing xlibs: xlibs conflicts with xlib6g (<<4.0) xlib6g (version 3.3.6-10) is installed. dpkg: error processing xlibs_4.0.2-1_i386.deb (--install): conflicting packages - not installed xlibs Errors were encountered while processing: xlibs_4.0.2-1_i3386.deb Trying to fix it I did this: #apt-get -f install Reading Package List Done Building Dependency Tree ... Done Correcting dependencies ... Done The following packages will be REMOVED: atlas2-dev blas-dev blt-dev g++ lam2-dev libc6-dev libgc5-dev libgimp1.1.17-dev libgtk1.2-dbg lingtk1.2-dev libncurses5-dev libstdc++2.10-dev locales task-parallel-computing-dev task-tcltk-dev task-x-window-system tcl8.2-dev tk8.2-dev tktable-dev xlib6g-dev 0 packages upgraded, 0 newly installed, 20 to remove and 0 not upgraded. bla bla . What can I do to fix this? BTW I'm on a potato box using the 2.2.17 kernel. I downloaded the xlib6g-package (4.0.2-1) from testing and libxaw6-package which it depends on too. But I can't install the new xlib6g-package! It get's me an error - it complains that it is not a debian archive . dpkg: error processing xlib6g_4.0.2-1_all.deb (--install): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: xlib6g_4.0.2-1_all.deb Any help appreciated Philipp
dependency problem with dpk
Hey I don't know how to fix this: I installed the new libc6 version (2.2.1-1) on my potato box. So far everything went fine, but when I tried to add other packages using dpkg I get this: Reading Packae Lists... Done Building Dependency Tree ... Done You might want to run 'apt-get -f install' to correct these. Sorry, but the following packages have unmet dependencies: libc6-dev: Depends: libc6 (=2.1.3-10) but 2.2.1-1 is installed locales: Depends: libc6 (=2.1.3-10) but 2.2.1-1 is installed E: Unmet dependencies. Try using -f But when I use 'apt-get -f install' I get this: #apt-get -f install Reading Package List Done Building Dependency Tree ... Done Correcting dependencies ... Done The following packages will be REMOVED: atlas2-dev blas-dev blt-dev g++ lam2-dev libc6-dev libgc5-dev libgimp1.1.17-dev libgtk1.2-dbg lingtk1.2-dev libncurses5-dev libstdc++2.10-dev locales task-parallel-computing-dev task-tcltk-dev task-x-window-system tcl8.2-dev tk8.2-dev tktable-dev xlib6g-dev 0 packages upgraded, 0 newly installed, 20 to remove and 0 not upgraded. yada... yada... yada... Abort. I also downloaded the libc6-dev package which it says it depends on but when I install this it, it again depends on g++, etc... Would it be possible to add the testing directories to my sources.list and get all the packages with apt-get from the Debian server? Would 'apt-get upgrade' work then? I don't want to upgrade to testing completely (!!) but I want the blic6 package work ! What can I do? When I downgraded to the 'old' version of libc6 (2.1.3-10) dpkg broke and I couldn't do anything b/c no libc6 package was correctly installed and I don't want to mess up b/c I'm not so comfortable with dpkg and apt-get! That's why I'm still using potato :) TIA !!! Philipp
[solved]Re: dependency problem with dpk
Thanks! I figured it out. When I was downgrading my libc6 it somehow removed the 'ldconfig' file /sbin - so I just copied it from another machine with a similar setup and I could (or better apt-get could) finish the downgrade of my libc6 and from there everything worked fine. I know I did something stupid and I won't do it again :) Thanks again! Colin Watson wrote: > Philipp Bliedung <[EMAIL PROTECTED]> wrote: > >I installed the new libc6 version (2.2.1-1) on my potato box. > > Don't do that if you don't know what you're doing. :) > > >Would it be possible to add the testing directories to my sources.list > >and get all the packages with apt-get from the Debian server? Would > >'apt-get upgrade' work then? I don't want to upgrade to testing > >completely (!!) but I want the blic6 package work ! > >What can I do? > >When I downgraded to the 'old' version of libc6 (2.1.3-10) dpkg broke > > Details? > > If you can't get the old package reinstalled, you might as well upgrade > to testing. Put it in your sources.list, apt-get update, apt-get > dist-upgrade. > > -- > Colin Watson [EMAIL PROTECTED] > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: "ldconfig not found in PATH"
Hi I had a similar problem just a few minutes ago. Check if this file is still in /sbin. When I downgraded some packages (ok, I did something wrong but still...) somehow this file was removed from my hard drive. I copied it from another laptop with similar settings and everything (apt-get and dpkg) is working fine! Maybe that helps . Philipp John Kerr Anderson wrote: > I have been getting the following message when trying use dselect: > > dpkg: `ldconfig' not found on PATH. > dpkg: 1 expected program(s) not found on PATH. > NB: root's PATH should usually contain /usr/local/sbin, /usr/sbin and > /sbin. > E: Sub-process /usr/bin/dpkg returned an error code (2) > Some errors occurred while unpacking. I'm going to configure the > packages that were installed. This may result in duplicate errors > or errors caused by missing dependencies. This is OK, only the errors > above this message are important. Please fix them and run [I]nstall again > Press enter to continue. > > I don't know how to fix this, no matter what I do, I come up with this > message, can anyone help?
error compiling a program
Hi, I can't figure out why this is happening. I tried to compile a program (OpenDX 4.1) because there are no binaries for Debian - at least not on the website of OpenDX. Anyway I did ./configure and than make ... and that's what I get: make[3]: Entering directory '/home/user1/programs/dx-4.1.0/src/exec/libdx' sed -e 's/[ ][ ]*\$/ $/' buffer.Z > __buffer.c gcc -E --buffer.c \ | tr -s "\044" "\012" \ | sed -e '/^#/d' \ -e '/s/INCLUDE2/#include/' \ -e '/^pragma/#pragma/' > buffer.c /bin/sh: buffer.c: Permission denied cpp: output pipe has been closed make[3]: *** [buffer.c] Error 1 make[3]: Leaving directory '/home/user1/programs/dx-4.1.0/src/exec/libdx' I have no clue what this is trying to tell me, something with no permission but I don't see why. Can anybody help me on that ? Help is very much appreciated! Philipp
Re: error compiling a program
Sorry for the typo!! With changing permissions I got it working! :) Well I could have probably figured that out myself - but still THANKS A LOT for the explanation!! Philipp Christoph Simon wrote: > On Mon, 12 Mar 2001 22:12:09 +0100 > Philipp Bliedung <[EMAIL PROTECTED]> wrote: > > > Hi, > > > > I can't figure out why this is happening. I tried to compile a program > > (OpenDX 4.1) because there are no binaries for Debian - at least not on > > the website of OpenDX. Anyway I did ./configure and than make ... and > > that's what I get: > > > > > > make[3]: Entering directory > > '/home/user1/programs/dx-4.1.0/src/exec/libdx' > > sed -e 's/[ ][ ]*\$/ $/' buffer.Z > __buffer.c > > gcc -E --buffer.c \ > > | tr -s "\044" "\012" \ > > | sed -e '/^#/d' \ > > -e '/s/INCLUDE2/#include/' \ > > -e '/^pragma/#pragma/' > buffer.c > > /bin/sh: buffer.c: Permission denied > > cpp: output pipe has been closed > > make[3]: *** [buffer.c] Error 1 > > make[3]: Leaving directory > > '/home/user1/programs/dx-4.1.0/src/exec/libdx' > > > > > > I have no clue what this is trying to tell me, something with no > > permission but I don't see why. Can anybody help me on that ? > > Help is very much appreciated! > > First of all, there seems to be a typo: The first line starting with > sed creates a file __buffer.c, but the second line, starting with gcc > references --buffer.c, but I'm not sure. > > Then, the makefile is executing a script which is trying to create a > file called buffer.c (this time without __ or --), but you have not > the permissions to do so. Check if there is already a file buffer.c > which might have no write permissions even for the owner (happens > sometimes after downloading). Before running make again, try this: > touch buffer.c > as the same user that is executing make. Change permissions until this > works. > > HTH > > -- > Christoph Simon > [EMAIL PROTECTED] > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
no sound with kernel 2.4.2
Hi everybody, I just compiled the 2.4.2 kernel. Everything is working fine except for the sound. Under kernel 2.2.17 I had this is my /etc/modules: sound mpu401 ad1848 opl3sa2 opl3 options opl3sa2 dma=1 dma2=0 io=0x538 mpu_io=0x330 mss_io=0x530 irq=7 options opl3 io=0x388 I used gom as the mixer. When I booted the 2.4.2 kernel (witeh the same /etc/modules) and tried to play a song I got this: "Cannot open audio device. Please make sure that the audio device is properly configured." And when I try to use gom I get this: gom ERROR: Can't open mixer device special file "/dev/mixer": No such gom: device. Error help: if loading a mixer special file leads to "No such gom: device", then you most likely do have the kernel sound driver gom: not or incorrectly installed. "Permission denied" means you gom: need permissions by the local admin in the first place. gom: gom: Current channel information gom: --- gom: gom: No Name Rec Volumes Vol-0 Vol-1 Locked gom: 0.vol-1 -1 -1 -1 1 But there is a file named /dev/mixer crw-rw1 root audio 14, 0 Jul 5 2000 mixer crw-rw1 root audio 14, 16 Jul 5 2000 mixer1 crw-rw1 root audio 14, 32 Jul 5 2000 mixer2 crw-rw1 root audio 14, 48 Jul 5 2000 mixer3 lrwxrwxrwx1 root root 10 Mar 15 18:51 modem -> /dev/ttyS3 lrwxrwxrwx1 root root5 Oct 28 23:51 mouse -> psaux When I compiled the kernel I selected everything that was under "sound" to be compiled as a module. Also when I try to load these modules by hand (insmod mpu401, etc...) it doesn't give an error I have no clue why this doesn't work! When I boot the 2.2.17 kernel everything works just great. Here is what I get when I use gom under 2.2.17: [EMAIL PROTECTED]:~ gom -t gom: gom: Current channel information gom: --- gom: gom: No Name Rec Volumes Vol-0 Vol-1 Locked gom: 0.vol-1 2 75 75 1 [EMAIL PROTECTED]:~ BTW I'm on a Toshiba Tecra 8000 Laptop. Help is very much appreciated! TIA! Philipp
Re: no sound with kernel 2.4.2
Matthew Bryant Baxa wrote: > On Thu, Mar 15, 2001 at 07:16:09PM +0100, Philipp Bliedung wrote: > > > I used gom as the mixer. When I booted the 2.4.2 kernel (witeh the same > > /etc/modules) and tried to play a song I got this: > > "Cannot open audio device. Please make sure that the audio device is > > properly configured." > > > > And when I try to use gom I get this: > > > > gom ERROR: Can't open mixer device special file "/dev/mixer": No such > > gom: device. Error help: if loading a mixer special file leads to "No > > such > > gom: device", then you most likely do have the kernel sound driver > > gom: not or incorrectly installed. "Permission denied" means you > > gom: need permissions by the local admin in the first place. > > gom: > > gom: Current channel information > > gom: --- > > gom: > > gom: No Name Rec Volumes Vol-0 Vol-1 Locked > > gom: 0.vol-1 -1 -1 -1 1 > > > > But there is a file named /dev/mixer > > > > crw-rw1 root audio 14, 0 Jul 5 2000 mixer > I used to have this problem until I finally remembered that as a user I didnt have permission to use the mixer device. Try adding yourself to the audio group. I'm already a member of the audio group ! Otherwise I wouldn't be able to play music using the 2.2.17 kernel. Even root gets an error trying to run gom.
pppd problem ?
Hi, I just compiled the 2.4.0 kernel. (I compiled the ppp-support into it.) When I reboot everything works fine, except for the PCMCIA modem. My PCMCIA network card works just fine. So I upgraded pppd to version 2.4.0 but it still doesn't work? Is there anything else I'm missing? Here is what I get when I try to connect to my ISP using pon: laptop:/home/user1# tail /var/log/syslog Mar 17 19:44:48 laptop chat[1785]: ^M Mar 17 19:45:07 laptop chat[1785]: ATDT6749955^M^M Mar 17 19:45:07 laptop chat[1785]: CONNECT Mar 17 19:45:07 laptop chat[1785]: -- got it Mar 17 19:45:07 laptop chat[1785]: send (\d) Mar 17 19:45:08 laptop pppd[1784]: Serial connection established. Mar 17 19:45:08 laptop modprobe: modprobe: Can't locate module tty-ldisc-3 Mar 17 19:45:08 laptop pppd[1784]: Couldn't set tty to PPP discipline: Invalid argument Mar 17 19:45:08 laptop pppd[1784]: Hangup (SIGHUP) Mar 17 19:45:08 laptop pppd[1784]: Exit. laptop:/home/user1# It complains about the module: tty-ldisc-3. I have absolutely no clue where I can get it from, I've never heared about anything lilke that. What do I have to do to get my modem working? TIA ! Philipp
Re: pppd problem ?
Thanks for your help - that did the trick !! Philipp Christoph Groth wrote: > Philipp Bliedung <[EMAIL PROTECTED]> writes: > > > It complains about the module: tty-ldisc-3. I have absolutely no > > clue where I can get it from, I've never heared about anything lilke > > that. What do I have to do to get my modem working? > > Have a look at the file /etc/modutils/aliases (The files located in > /etc/modutils/ are used to create /etc/modules.conf by the program > `update-modules'. See `man update-modules' for more information). > There is a line > > alias tty-ldisc-3 ppp_async > > You'll need the kernel module ppp_async, so just activate the option > `PPP support for async serial ports' in the kernel configuration. > Perhaps you should activate the ppp-compression-modules, too. IIRC > ppp support was just one module in 2.2-kernels, now it appears to have > been divided into several smaller modules. > > If there is some strange name and you don't know what it means you can > always try: > > find /etc -type f | xargs grep strange_name > > This will often give you the vital hint. > > hope this helps, > Christoph > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ppp 2.4.0
Hi, I updated my kernel to 2.4.0 - I also updated the ppp-package to 2.4.0. But I can't connect to my ISP directly, well actually I can b/c I can ping to a specific IP address and /var/log/syslog tells me that a connection was established. But I *can't* ping to anything that starts with www. something ... and so on Here is my cuurent setup: laptop:/home/user1# route Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 213.187.64.125 * 255.255.255.255 UH0 0 0 ppp0 localnet* 255.255.255.0 U0 0 0eth0 default213.187.64.125 0.0.0.0 UG0 0 0ppp0 laptop:/home/user1# ping 192.18.97.241 (which I think is www.sun.com) PING 192.18.97.241 (192.18.97.241): 56 data bytes 64 bytes from 192.18.97.241: icmp_seq=0 ttl=236 time=441.1 ms 64 bytes from 192.18.97.241: icmp_seq=1 ttl=236 time=350.0 ms 64 bytes from 192.18.97.241: icmp_seq=2 ttl=236 time=429.9 ms -- 192.18.97.241 ping statistics --- 3 packets transmitted, 3 packets received, 0% packet loss round-trip min/avg/max = 350.0/407.0/441.1 ms laptop:/home/user1# ping www.sun.com ping: unknown host www.sun.com laptop:/home/user1# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:80:C8:8C:1E:F7 inet addr:192.168.5.18 Bcast:192.168.5.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:10 Base address:0x300 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:297 errors:0 dropped:0 overruns:0 frame:0 TX packets:297 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 ppp0 Link encap:Point-to-Point Protocol inet addr:213.187.67.148 P-t-P:213.187.64.125 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 my /etc/resolv.conf looks like this: # eth0 begin domain # eth0 end nameserver 213.187.64.125 I guess that 213.187.64.125 is the ip address of my ISP - there is a different one in the /etc/resolv.conf on the server but I get this in /var/log/syslog: Mar 20 20:13:22 laptop pppd[571]: local IP address 213.187.66.48 Mar 20 20:13:22 laptop pppd[571]: remote IP address 213.187.64.124 Mar 20 20:13:22 laptop pppd[571]: Script /etc/ppp/ip-up started (pid 575) Mar 20 20:13:23 laptop pppd[571]: Script /etc/ppp/ip-up finished (pid 575), status = 0x100 Can anybody figure out what I'm doing wrong here? Thanks a lot fot your help. Philipp
ppp 2.4.0 (part2)
I just saw that the table in my last mail got messed up - soory for that! I hope this one is somewhat readable Philipp laptop:/home/user1# route Kernel IP routing table Destination Gateway GenmaskFlags Metric Ref Use Iface 213.187.64.125 * 255.255.255.255 UH 0 0 0 ppp0 localnet *255.255.255.0 U 0 0 0eth0 default 213.187.64.125 0.0.0.0UG 0 0 0 ppp0
ppp 2.4.0
Hi everybody, sorry for the other mail - there was something messed up with my mail box and my first mail wasn't send... Sorry about that here's my problem: I updated my kernel to 2.4.0 - I also updated the ppp-package to 2.4.0. But I can't connect to my ISP directly, well actually I can b/c I can ping to a specific IP address and /var/log/syslog tells me that a connection was established. But I *can't* ping to anything that starts with www. something ... and so on Here is my cuurent setup: laptop:/home/user1# route Kernel IP routing table Destination Gateway GenmaskFlags Metric Ref Use Iface 213.187.64.125 * 255.255.255.255 UH 0 0 0 ppp0 localnet *255.255.255.0 U 0 0 0eth0 default 213.187.64.125 0.0.0.0UG 0 0 0 ppp0 laptop:/home/user1# ping 192.18.97.241 (which I think is www.sun.com) PING 192.18.97.241 (192.18.97.241): 56 data bytes 64 bytes from 192.18.97.241: icmp_seq=0 ttl=236 time=441.1 ms 64 bytes from 192.18.97.241: icmp_seq=1 ttl=236 time=350.0 ms 64 bytes from 192.18.97.241: icmp_seq=2 ttl=236 time=429.9 ms -- 192.18.97.241 ping statistics --- 3 packets transmitted, 3 packets received, 0% packet loss round-trip min/avg/max = 350.0/407.0/441.1 ms laptop:/home/user1# ping www.sun.com ping: unknown host www.sun.com laptop:/home/user1# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:80:C8:8C:1E:F7 inet addr:192.168.5.18 Bcast:192.168.5.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:10 Base address:0x300 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:297 errors:0 dropped:0 overruns:0 frame:0 TX packets:297 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 ppp0 Link encap:Point-to-Point Protocol inet addr:213.187.67.148 P-t-P:213.187.64.125 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 my /etc/resolv.conf looks like this: # eth0 begin domain # eth0 end nameserver 213.187.64.125 I guess that 213.187.64.125 is the ip address of my ISP - there is a different one in the /etc/resolv.conf on the server but I get this in /var/log/syslog: Mar 20 20:13:22 laptop pppd[571]: local IP address 213.187.66.48 Mar 20 20:13:22 laptop pppd[571]: remote IP address 213.187.64.124 Mar 20 20:13:22 laptop pppd[571]: Script /etc/ppp/ip-up started (pid 575) Mar 20 20:13:23 laptop pppd[571]: Script /etc/ppp/ip-up finished (pid 575), status = 0x100 Can anybody figure out what I'm doing wrong here? Thanks a lot fot your help. Philipp
Re: PCMCIA modem card recommendation
I'm using a 56k US Robotics CC1580 modem (it is aslo a fax modem) It has done a very good job for almost 2 years now... ok it's not one of the new ones - but it is very reliable!! Philipp Bill Wohler wrote: > A friend of mine writes: > > P.S. If you know any linux laptop gurus who can recommend a good PCMCIA > modem > card that I can get in a hurry, I'd be most appreciative. I'm really > f*cked > without one. > > Thanks! > > -- > Bill Wohler <[EMAIL PROTECTED]> http://www.newt.com/wohler/ GnuPG > ID:610BD9AD > Maintainer of comp.mail.mh FAQ and mh-e. Vote Libertarian! > If you're passed on the right, you're in the wrong lane. > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
OT: problem compiling GnoCam-0.10
Hi I'm trying to compile the gui for gphoto-2.0beta1. So I get the sources fro GnoCam. But when I run ./configure it gets me this: checking for gnome-libs >= 1.0.55... found checking for bonobo>=0.37... found checking for GAL >= 0.7.0.0... configure: error: *** You need GAL for this version of GnoCam. Get the latest *** version from http://www.gnome.org. Mirrors can be found at *** http://www.gnome.org/mirrors. so I get the sources for gal-0.9.1 from the ftp://ftp.gnome.org/pub/GNOME/unstable/sources/gal/ and compiled it. Even dpkg shows that GAL is installed: [EMAIL PROTECTED]:~/programs/gal-0.9 dpkg --list | egrep gal ii gal0.9.1-2GNOME Application Libs (GAL) ii gs 5.10-10.1 Postscript interpreter with X11 and svgalib ii libgal60.7-2 G App Libs (run time library) ii libgal90.10-1 G App Libs (run time library) ii svgalibg1 1.4.1-2SVGA display utilities ii svgalibg1-dev 1.4.1-2Shared, non-x, graphics library used by Ghos But running ./configure in the GnoCam directory gives me still the same error. What is wrong here? I do have the right packages, haven't I? TIA, Philipp
creating a cd-image
Hi I have a quick question: I want to create images off the potato cds. Which program could I use? After I have these images I just have to edit /etc/fstab and add the location, mount point, type and options, right? Of course I have to edit /etc/apt/sources.list too, but then I would be able to mount these images like any other device or partition? Thanks, Philipp
Re: creating a cd-image
thanks for your help! I want to set up a server (at home), and there is no cd-drive in it - I won't need a cd-drive in there anyway. but just in case I want to install extra packages I thought I'd just put the iso-images on the hdd and install all the packages as usual using apt-get. I'm pretty sure mkisofs is what I was looking for thanks, Philipp Jeremy wrote: Philipp Bliedung <[EMAIL PROTECTED]> writes: I want to create images off the potato cds. Which program could I use? Well, if you're looking to just make images (copies) from the CDs, I believe that readcd should work. (it comes with the cdrecord package) After I have these images I just have to edit /etc/fstab and add the location, mount point, type and options, right? It depends on what you're doing with them. Are you creating a personalized installation set? Of course I have to edit /etc/apt/sources.list too, but then I would be able to mount these images like any other device or partition? Hm... this isn't something I've attempted, but I'm _thinking_ that you should be able to use the loopback device to mount the images made by readcd. I hope I haven't thrown you too far off track. =0) Jeremy
problem with ppp and 2.4.7
Hi, I just compiled 2.4.7 and everything seems to work just fine - like sound, nfs, usb, etc. But I can't get ppp to work. Everytime I use 'pon' to connect to the internet I get this: Sep 9 14:22:32 laptop pppd[535]: pppd 2.4.1 started by root, uid 0 Sep 9 14:22:33 laptop chat[536]: Can't get terminal parameters: Input/output error Sep 9 14:22:33 laptop pppd[535]: Connect script failed Sep 9 14:22:34 laptop pppd[535]: Exit. When I boot 2.4.2 again, everything works without any problems !! I intsalled ppp 2.4.1 after I compiled the 2.4.7 kernel (I should have read /usr/src/linux/Documentation/Changes more carfully) - but that shouldn't be the problem, right? Or do I have to compile the kernel again? I found some information about this on the internet, but I still don't know how to solve the problem. It says that maybe the IRQ is already used by another device. So here is "cat /proc/interrupts" CPU0 0: 145848 XT-PIC timer 1: 1023 XT-PIC keyboard 2: 0 XT-PIC cascade 7: 7965 XT-PIC MS Sound System 10: 2 XT-PIC pcnet_cs 11: 7 XT-PIC Toshiba America Info Systems ToPIC97, Toshiba America Info Systems ToPI C97 (#2), usb-uhci 12: 4005 XT-PIC PS/2 Mouse 14: 93572 XT-PIC ide0 15: 4 XT-PIC ide1 NMI: 0 ERR: 0 and "setserial" for the modem (which is /dev/ttyS4) /dev/ttyS4, UART: 16550A, Port: 0x03e8, IRQ: 5 It doesn't seem like the IRQ is already used, right? Any ideas? thanks a lot! Philipp
Re: problem with ppp and 2.4.7
thanks for your help. Somehow the 2.4.7 kernel uses /dev/ttyS4 to connect to the modem instead of /dev/ttyS3 which is used by the 2.4.2 kernel. Well I changed everything to point to /dev/ttyS4 and everything is working now, again. :-) Can anybody tell me why I have to use /dev/ttyS4 now instead of /dev/ttyS3?? I didn't change anything regarding this - all I did was to compile a new kernel to add some features that aren't related to ppp at all. thanks, Philipp
something wrong with the RealPlayer
Hi, There is something weird happening with my RealPlayer. Everthing worked fine in the past but when I started RealPlayer 7 today there are no letters or numbers anymore. There are dotted rectangulars instead of letters and numbers. I thoght that might be a problm of RealPlayer 7 (although it worked in the past) so I installed RealPlayer 8. But there is the same effect - when I start the installation I can't read anything - all I see is a dotted rectangular instead of a letter. But it still works! I can play audio and video files but I can't read anything. What is wrong here?? thanks, Philipp
Re: something wrong with the RealPlayer
Keith Willoughby wrote: Philipp Bliedung <[EMAIL PROTECTED]> writes: when I start the installation I can't read anything - all I see is a dotted rectangular instead of a letter. it's a font problem. Try reordering your FontPath statements in XF86Conf[-4] I reordered the /etc/XF86Config-4 file. It looks like this: . FontPath "/usr/X11R6/lib/X11/fonts/misc/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "unix/:7101" ... It didn't do anything - I get the same effect. Thanks, Philipp
Re: something wrong with the RealPlayer
Stephen E. Hargrove wrote: * Philipp Bliedung ([EMAIL PROTECTED]) babbled: There is something weird happening with my RealPlayer. Everthing worked fine in the past but when I started RealPlayer 7 today there are no letters or numbers anymore. There are dotted rectangulars instead of letters and numbers. See http://www.debian.org/News/weekly/2001/23/ under "Fonts missing after upgrade" and http://bugs.debian.org/107554 . I updated to xfs 4.1.0-9 and installed xfonts-base-transcoded 4.1.0-9 but still get the same effect. here is what I have installed regarding xfonts: ii xfonts-100dpi 4.1.0-7100 dpi fonts for X ii xfonts-75dpi 4.1.0-775 dpi fonts for X ii xfonts-base4.1.0-7standard fonts for X How can I fix this? Philipp
Re: something wrong with the RealPlayer
Mark Carroll wrote: On Sat, 27 Oct 2001, Philipp Bliedung wrote: There is something weird happening with my RealPlayer. Everthing worked fine in the past but when I started RealPlayer 7 today there are no letters or numbers anymore. There are dotted rectangulars instead of letters and numbers. (snip) This happened to me. I fixed it, bizarrely, by removing all FontPaths from my XF86Config except for FontPath "unix/:7100", putting them in my xfs config instead, and running xfs. In /etc/XF86Config-4 I commented the FontPath lines out. ... #FontPath "/usr/X11R6/lib/X11/fonts/misc/:unscaled" #FontPath "/usr/X11R6/lib/X11/fonts/misc/" #FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" #FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" #FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" #FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" #FontPath "/usr/X11R6/lib/X11/fonts/Type1/" #FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "unix/:7100" and /usr/X11R6/lib/X11/fs/config looks like this: # font server configuration file # $Xorg: config.cpp,v 1.3 2000/08/17 19:54:19 cpqbld Exp $ # allow a maximum of 10 clients to connect to this font server client-limit = 10 # when a font server reaches its limit, start up a new one clone-self = on # log messages to /var/log/xfs.log (if syslog is not used) error-file = /var/log/xfs.log # log errors using syslog use-syslog = on # turn off TCP port listening (Unix domain connections are still permitted) no-listen = tcp # paths to search for fonts catalogue = /usr/lib/X11/fonts/misc/,/usr/lib/X11/fonts/cyrillic/,/usr/lib/X11/fonts/100dpi/:unscaled, /usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1/,/usr/lib/X11/fonts/CID,/usr/lib/X11/fonts /Speedo/,/usr/lib/X11/fonts/100dpi/,/usr/lib/X11/fonts/75dpi/ # in decipoints default-point-size = 120 # x1,y1,x2,y2,... default-resolutions = 100,100,75,75 # font cache control, specified in kB cache-hi-mark = 2048 cache-low-mark = 1433 cache-balance = 70 Is that right? It didn't do anything - still same effect. One more thing: When I enter 'X -version' I get: XFree86 Version 3.3.6 / X Window System That means that I'm using XFree86 in the 3.3.6 version? I'm on a laptop so I need that xserver-svga package (for NeoMagic cards) But it is only available in 3.3.6-38. Therefore does it do any difference when I edit /etc/XF86Config-4 since I'm not running XFree 4.x.x ?? But all the other packages relating to X are 4.1.x!! ii xserver-common 4.1.0-7files and utilities common to all X servers ii xserver-common 3.3.6-38 files and utilities common to XFree86 3.x X ii xserver-svga 3.3.6-38 X server for SVGA graphics cards ii xserver-vga16 3.3.6-11potato X server for VGA graphics cards ii xserver-xfree8 4.1.0-7the XFree86 X server ii xfree86-common 4.1.0-4X Window System (XFree86) infrastructure ii xserver-xfree8 4.1.0-7the XFree86 X server ii xfonts-100dpi 4.1.0-7100 dpi fonts for X ii xfonts-75dpi 4.1.0-775 dpi fonts for X ii xfonts-base4.1.0-7standard fonts for X ii xfonts-base-tr 4.1.0-9standard fonts for X (transcoded from ISO 10 ... ii xfs4.1.0-9X font server Sorry for these somewhat stupid questoins. But I don't know how to fix this. Thanks for your patience. Philipp -- Mark
something wrong with my fonts
Hi, Since I fixed my problem with the fonts in RealPlayer 8 I get a different fonts when I start gimp from the xterm then when I start it from the menue (gnome or blackbox). This doesn't apply only to gimp - I get the same effect with gnumeric, gcalc, dia, gnp, etc. The menue-bar is just huge when I start it from the menue. When I start it from the xterm everything is just fine. See for yourself! I attached a little screenshot. Thanks, Philipp <>
Re: something wrong with my fonts
Karsten M. Self wrote: on Wed, Oct 31, 2001 at 08:03:50PM +0100, Philipp Bliedung ([EMAIL PROTECTED]) wrote: Hi, Since I fixed my problem with the fonts in RealPlayer 8 I get a different fonts when I start gimp from the xterm then when I start it from the menue (gnome or blackbox). This doesn't apply only to gimp - I get the same effect with gnumeric, gcalc, dia, gnp, etc. The menue-bar is just huge when I start it from the menue. When I start it from the xterm everything is just fine. See for yourself! I attached a little screenshot. In future, post a URL to a webpage containing an image, if at all possible. Looks like you want to modify your font settings under the GNOME Command Center. This turns up somewhere under the GNOME files, possibly in ~/.gnome/theme-switcher-capplet Drives me nuts, particularly as I don't use GNOME, but do use some GNOME apps. I have to shut down WindowMaker, launch a GNOME session, change settings Hmmm... Try just running: gnome-edit-properties-capplet ...and modifying your font under "Themes". I tried different fonts, different themes und the default font for each theme - then restarted GNOME everytime I changed something - but I still get the same effect. Is this a problem related only to GNOME or why does the same thing also happen in blackbox? When I start the programs from the xterm - all the different fonts are set. So if I change the size of a certain font in the GNOME Control-Center then the change shows up when I start the program from the xterm - but only then! If I start a program from the GNOME menue (or from the menue in blackbox) I get the same weird fonts as before. It looks like the is always a blank line under everything I can chose from the menue bar and the size is also different (mostly larger than I selected) What's wrong here? Thanks, Philipp Peace.
/dev/mixer missing
Hi, Since I upgraded to kernel 2.4.2 I don't get my sound to work (which it did under 2.2.17) I can't set up any mixer because I don't have such a device anymore - don't know why. Did I miss something while compiling the kernel or do I need anyhting else (any program)? But, the keyboard bell works just fine when I load all the necessary modules (like opl3, etc.)!! I mean I can turn the volume up and down, but that's it Any ideas? TIA!! Philipp
Re: /dev/mixer missing
Thanks, I could create /dev/mixer - but it looks like this: laptop:/dev# ls -l mixer* crw-rw1 root audio 14, 0 Mar 25 22:46 mixer crw-rw1 root audio 14, 16 Mar 25 22:46 mixer1 crw-rw1 root audio 14, 32 Mar 25 22:46 mixer2 crw-rw1 root audio 14, 48 Mar 25 22:46 mixer3 laptop:/dev# wmmixer wmmixer : Unable to open mixer device '/dev/mixer'. wmmixer : Sorry, no supported channels found. What can I do? Why doesn't it open?? Jason Majors wrote: > You can use MAKEDEV. > > On Sun, Mar 25, 2001 at 03:20:29PM +0200, Philipp Bliedung scribbled... > > Hi, > > > > Since I upgraded to kernel 2.4.2 I don't get my sound to work (which it > > did under 2.2.17) > > I can't set up any mixer because I don't have such a device anymore - > > don't know why. Did I miss something while compiling the kernel or do I > > need anyhting else (any program)? But, the keyboard bell works just fine > > when I load all the necessary modules (like opl3, etc.)!! I mean I can > > turn the volume up and down, but that's it > > > > Any ideas? > > TIA!! > > > > Philipp > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > > [EMAIL PROTECTED] > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: /dev/mixer missing
Thanks for your replies!! I don't know if I'm missing something for the 2.4.2 kernel - I updated everything to get the 2.4.0 kernel work (where the sound worked a little bit - I could play CD's, but the volume was VERY low - because I didn't get the mixer to work, but at least I could hear *something* ) For the change to 2.4.2 I just updated the modutils to 2.4.2-1, nothing else. I don't know about anything I'm missing. here is something from 'dmesg' . Mar 26 19:32:50 laptop kernel: Adding Swap: 160608k swap-space (priority -1) Mar 26 19:32:50 laptop kernel: ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 Mar 26 19:32:50 laptop kernel: opl3sa2: No cards found Mar 26 19:32:50 laptop kernel: opl3sa2: 0 PnP card(s) found. Mar 26 19:32:50 laptop kernel: YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 . and here are all my modules loaded so far: laptop:/# lsmod Module Size Used by usb-storage43328 0 (unused) scsi_mod 88336 0 [usb-storage] uhci 18512 0 (unused) usbcore46512 0 [usb-storage uhci] opl3 11184 0 (unused) opl3sa2 7280 0 (unused) ad1848 16736 0 [opl3sa2] mpu401 18704 0 [opl3sa2] sound 55792 0 [opl3 opl3sa2 ad1848 mpu401] soundcore 3856 2 [sound] unix 14240 102 (autoclean) laptop:/# Any guesses?? P.S.: linking /dev/mixer to /dev/mixer1 didn't change anything - I still get "wmmixer : Unable to open mixer device '/dev/mixer'" Philipp Xuewen WANG wrote: > I had the same problem with gmixer. What I do is ln -sf mixer1 mixer and it > works. Hope that can help you. > > Philipp Bliedung <[EMAIL PROTECTED]> wrote: > Thanks, I could create /dev/mixer - but it looks like this: > > laptop:/dev# ls -l mixer* > crw-rw1 root audio 14, 0 Mar 25 22:46 mixer > crw-rw1 root audio 14, 16 Mar 25 22:46 mixer1 > crw-rw1 root audio 14, 32 Mar 25 22:46 mixer2 > crw-rw1 root audio 14, 48 Mar 25 22:46 mixer3 > > laptop:/dev# wmmixer > wmmixer : Unable to open mixer device '/dev/mixer'. > wmmixer : Sorry, no supported channels found. > > What can I do? Why doesn't it open?? > > Jason Majors wrote: > > > You can use MAKEDEV. > > > > On Sun, Mar 25, 2001 at 03:20:29PM +0200, Philipp Bliedung scribbled... > > > Hi, > > > > > > Since I upgraded to kernel 2.4.2 I don't get my sound to work (which it > > > did under 2.2.17) > > > I can't set up any mixer because I don't have such a device anymore - > > > don't know why. Did I miss something while compiling the kernel or do I > > > need anyhting else (any program)? But, the keyboard bell works just fine > > > when I load all the necessary modules (like opl3, etc.)!! I mean I can > > > turn the volume up and down, but that's it > > > > > > Any ideas? > > > TIA!! > > > > > > Philipp > > > > > > -- > > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > > with a subject of "unsubscribe". Trouble? Contact > > > [EMAIL PROTECTED] > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > Get free email and a permanent address at http://www.netaddress.com/?N=1
Re: /dev/mixer missing
Yes, I'm in group 'audio' laptop:/dev# adduser user1 audio The user `user1' is already a member of audio. laptop:/dev# sound is compiled in (as moules) - here is my .config # # Sound # CONFIG_SOUND=m CONFIG_SOUND_CMPCI=m # CONFIG_SOUND_CMPCI_SPDIFLOOP is not set # CONFIG_SOUND_CMPCI_4CH is not set CONFIG_SOUND_EMU10K1=m CONFIG_SOUND_FUSION=m CONFIG_SOUND_PAS=m CONFIG_SOUND_PSS=m # CONFIG_PSS_MIXER is not set should I compile this in ?? # CONFIG_PSS_HAVE_BOOT is not set CONFIG_SOUND_SB=m CONFIG_SOUND_AWE32_SYNTH=m CONFIG_SOUND_YM3812=m CONFIG_SOUND_OPL3SA1=m CONFIG_SOUND_OPL3SA2=m CONFIG_SOUND_YMFPCI=m Raja R Harinath wrote: > Hi, > > Philipp Bliedung <[EMAIL PROTECTED]> writes: > > Thanks, I could create /dev/mixer - but it looks like this: > > > > laptop:/dev# ls -l mixer* > > crw-rw1 root audio 14, 0 Mar 25 22:46 mixer > > crw-rw1 root audio 14, 16 Mar 25 22:46 mixer1 > > crw-rw1 root audio 14, 32 Mar 25 22:46 mixer2 > > crw-rw1 root audio 14, 48 Mar 25 22:46 mixer3 > > > > laptop:/dev# wmmixer > > wmmixer : Unable to open mixer device '/dev/mixer'. > > wmmixer : Sorry, no supported channels found. > > > > What can I do? Why doesn't it open?? > > Couple of checks > > * are you in group 'audio' > * is sound support compiled in > > - Hari > -- > Raja R Harinath -- [EMAIL PROTECTED] > "When all else fails, read the instructions." -- Cahn's Axiom > "Our policy is, when in doubt, do the right thing." -- Roy L Ash
alsa driver
Hi I don't know how to install alsa drivers on my potato machine with the 2.4.2 kernel. I downloaded from the potato server the following packages and I succesfully installed them alsa-base_0.4.1i-5.deb alsa-headers_0.4.1i-5.deb alsa-source_0.4.1i-5.deb alsaconf_0.4.2-3.deb alsaplayer-alsa_0.99.26-2.1.deb alsaplayer-esd_0.99.26-2.1.deb alsaplayer-oss_0.99.26-2.1.deb alsaplayer_0.99.26-2.1.deb alsautils_0.4.1-5.deb asmixer_0.5-4.deb aumix_2-1.deb I also downloaded alsa-driver-0.4.tar.gz but when I try to compile this I get this: gcc -DALSA_BUILD -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=686 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o memory.o memory.c memory.c: In function `snd_malloc_pages_R838db77d': memory.c:45: warning: implicit declaration of function `MAP_NR' gcc -DALSA_BUILD -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=686 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o info.o info.c ... info.c:685: warning: initialization from incompatible pointer type info.c:691: warning: excess elements in struct initializer info.c:691: warning: (near initialization for `snd_info_card_link_inode_operations') info.c: In function `snd_info_card_register': info.c:784: structure has no member named `ops' info.c: In function `snd_info_create_device_R3271fcb6': info.c:954: structure has no member named `ops' info.c: In function `snd_info_register_R5d82e39c': info.c:1057: structure has no member named `ops' make[1]: *** [info.o] Error 1 make[1]: Leaving directory `/usr/src/modules/alsa-driver-0.4/kernel' make: *** [compile] Error 1 /usr/src/modules/alsa-driver-0.4# ... When I try to start the TkAlsaMixer (from the ALSA homepage) I get this: "Original error: The ALSA sound driver was not detected in this system." What do I miss ?? TIA! Philipp
what is 'slot-service-0-3' ?
I tried to set up the sound, but didn't get it to work. I always got this in /var/syslog this: /var/log/syslog . Apr 1 19:13:36 laptop modprobe: modprobe: Can't locate module sound-slot-0 Apr 1 19:13:36 laptop modprobe: modprobe: Can't locate module sound-service-0-3 . so I added this to my /etc/modules.conf /etc/modules.conf alias sound snd alias snd snd-card-opl3sa2 alias sound-slot-0 opl3sa2 options opl3sa2 dma=1 dma2=0 io=0x538 mpu_io=ox330 mss_io=0x530 irq=7 options opl3 io=0x388 Now I only get this in /var/log/syslog: Apr 1 19:13:36 laptop modprobe: modprobe: Can't locate module sound-service-0-3 I don't know what to add to /etc/modules.conf for this to go away. I RTFM (/usr/src/linux/Documentation/sound/Introduction and OPL3-SA2, etc.) and it said something about these kind of errors, but I didn't understand it. Can anybody give me a hint on this? TIA Philipp
Re: what is 'slot-service-0-3' ?
thanks for the hint to sndconfig.deb But I couldn't get it to work. It got me this error: /home/user1# sndconfig ERROR: There are already sound config options in /etc/modules.conf. This could give unexpected results. Please remove the appropriate entries from /etc/modutils/* Even after commenting out every in /etc/modules.conf (see below)I got the same error. What should I do with the files in /etc/modutils ? there are some config files from 'gom' and aliases and so on The second thing is I'm not quite sure if it's an opl3-sa2 chip that I have- with the 2.2.17 kernel I had also to load the 'ad1848' (Windows Sound System) and the 'mpu401' module for the sound to work. "L.V.Gandhi" wrote: > are you using alsa drivers or OSS drivers. I am having the same card > opl3-sax. with sndconfig.deb from web I could get sound working. I also > get both those comments. Still sound works. > Philipp Bliedung wrote: > > > > I tried to set up the sound, but didn't get it to work. I always got > > this in /var/syslog this: > > > > /var/log/syslog > > . > > Apr 1 19:13:36 laptop modprobe: modprobe: Can't locate module > > sound-slot-0 > > Apr 1 19:13:36 laptop modprobe: modprobe: Can't locate module > > sound-service-0-3 > > . > > > > so I added this to my /etc/modules.conf > > > > /etc/modules.conf > > alias sound snd > > alias snd snd-card-opl3sa2 > > alias sound-slot-0 opl3sa2 > > options opl3sa2 dma=1 dma2=0 io=0x538 mpu_io=ox330 mss_io=0x530 irq=7 > > options opl3 io=0x388 > > > > Now I only get this in /var/log/syslog: > > > > Apr 1 19:13:36 laptop modprobe: modprobe: Can't locate module > > sound-service-0-3 > > > > I don't know what to add to /etc/modules.conf for this to go away. > > I RTFM (/usr/src/linux/Documentation/sound/Introduction and OPL3-SA2, > > etc.) and it said something about these kind of errors, but I didn't > > understand it. > > Can anybody give me a hint on this? > > -- > L.V.Gandhi > MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA > [EMAIL PROTECTED], [EMAIL PROTECTED]
Re: what is 'slot-service-0-3' ?
Andrea Vettorello wrote: > Philipp Bliedung wrote: > > > I tried to set up the sound, but didn't get it to work. I always got > > this in /var/syslog this: > > > > /var/log/syslog > > . > > Apr 1 19:13:36 laptop modprobe: modprobe: Can't locate module > > sound-slot-0 > > Apr 1 19:13:36 laptop modprobe: modprobe: Can't locate module > > sound-service-0-3 > > . > > > > so I added this to my /etc/modules.conf > > > > /etc/modules.conf > > alias sound snd > > alias snd snd-card-opl3sa2 > > alias sound-slot-0 opl3sa2 > > options opl3sa2 dma=1 dma2=0 io=0x538 mpu_io=ox330 mss_io=0x530 irq=7 > > options opl3 io=0x388 > > > > Now I only get this in /var/log/syslog: > > > > Apr 1 19:13:36 laptop modprobe: modprobe: Can't locate module > > sound-service-0-3 > > > > I don't know what to add to /etc/modules.conf for this to go away. > > I RTFM (/usr/src/linux/Documentation/sound/Introduction and OPL3-SA2, > > etc.) and it said something about these kind of errors, but I didn't > > understand it. > > Can anybody give me a hint on this? > > > > In /usr/src/linux/Documentation/sound/Introduction, starting at line 389, you > will find (quoting) > > "...it will request "sound-service-0-n" where n > is > > 0 Mixer > > 2 MIDI > > 3, 4 DSP audio > ..." > > so, this is looking for the module that provide the DSP, you should add > somewhere in your /etc/modutils directory (addition to /etc/modules.conf will > be > lost next time you reboot or next time the update-module script will run...) > something like this: > > alias sound-slot-0-3 name_of_module_that_provide_DSP > > Hope this could help > > Andrea > Sorry for these maybe stupid questions, but what modulle provides DSP?? how can I find out? here is one more thing :/ any sound configuration tool doesn't seem to to detect any sound card. This is what I get: kernel: opl3sa2: No cards found. kernel: opl3sa2: 0 PnP card(s) found. modprobe: modprobe: Can't locate module sound-service-0-0 last message repeated 54 times modprobe: modprobe: Can't locate module sound-service-0-3 modprobe: modprobe: Can't locate module sound-service-0-0 last message repeated 69 times But I have the isapnp tool installed and the kernel has pnp suport compiled in! TIA!
(partly solved)Re: what is 'slot-service-0-3' ?
THANKS to everyone to replied to my question! I got it partly solved - I can now play music from the CD player. I found out that my sound card can emulate a sound blaster and after recompiling the kernel w/o pnp-support I now listen to CD's. Playing mp3's is still not working. Here's what I have in my BIOS: WSS I/O Address =530H SBPro I/O Address = 220H Synth. I/O Address = 388H WSS & SBPro & MPU401 IRQ Level IRQ=7 WSS (Play) DMA Channel =1 WSS (Rec.) & SBPro DMA Channel =2 Control I/O Address =538H MPU401 (MIDI I/F) =330H when I try to load the sound blaster module I can play music CD's modprobe sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330 /var/log/syslog: kernel: Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 kernel: SB 3.01 detected OK (220) kernel: SB DSP version is just 3.01 which means that your card is kernel: several years old (8 bit only device) or alternatively the sound driver kernel: is incorrectly configured. kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? When I try to load the OPL3-SA2 modules I can't do anything - not even playing CD's: insmod opl3sa2 irq=7 dma=1 dma2=0 io=0x538 mpu_io=0x330 mss_io=0x530 Using /lib/modules/2.4.2/kernel/drivers/sound/opl3sa2.o /lib/modules/2.4.2/kernel/drivers/sound/opl3sa2.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters and /var/log/syslog says: kernel: opl3sa2: Control I/O port 0x0 not free These are all the parameters that are set in my BIOS and which just fine with the 'old' kernel. Any ideas?? TIA Philipp
help! can't start X anymore
Hi I have a problem. I'm on a potato machine with xfree 4.0.2 installed. Everything was working fine until I installed Gimp 1.2 from woody. I added the woody tree to /etc/apt/sources.list and did an apt-get install gimp1.2 gimp1.2-perl and installed a whole bunch of packages. Well, that did work out fine too! And Gimp 1.2 is running just fine until I did a restart on my machine. I can't start X anymore. When I do startx I get this: $startx X: cannot stat /etc/X11/X (No such file or directory), aborting. xinit: unexpected signel 2 $ What am I missing or what am I doing wrong here? When I do XF86Setup it gives just a grey screen. That's it. Any help is highly appreciated! Philipp
Re: help! can't start X anymore
I don't have a file named X in /etc/X11. I believe that's what it's complainig about when I do startx. There is a file named X in /usr/bin/X11 but when I do ./X then I get the same error messages as startx would give me. I don't have a file named XFree86 in /usr/bin/X11/ Besides there another thing - I'm not sure if it has anything to do with it, but it might. When I tried to get the packages from woody I wrote that into my /etc/apt/sources.list: deb http://http.us.debian.org/debian unstable main contrib non-free deb http://non-us.debian.org/debian-non-US unstable/non-US main contrib non-free deb http://security.debian.org unstable/updates main contrib non-free deb http://http.us.debian.org/debian unstable main contrib non-free deb http://security.debian.org/debian-security unstable/updates main when I did apt-get update it got me this: W: Couldn't stat source package list 'http://security.debian.org unstable/updates/main Packages' (/var/state/apt/lists/security.debian.org_dists_unstable_updates_main_binary-i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list 'http://security.debian.org unstable/updates/contrib Packages' (/var/state/apt/lists/security.debian.org_dists_unstable_updates_contrib_binary-i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list 'http://security.debian.org unstable/updates/non-free Packages' (/var/state/apt/lists/security.debian.org_dists_unstable_updates_non-free_binary-i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list 'http://security.debian.org unstable/updates/main Packages' (/var/state/apt/lists/security.debian.org_debian-security_dists_unstable_updates_main_binary-i386_Packages) - stat (2 No such file or directory) W: You may want to run apt-get update to correct these missing files E: Some index files failed to download, they have been ignored, or old ones used instead. I still downloaded the packages! I'm not sure if I need packages from these sites, since I didn't couldn't access them. What did I wrong in my /etc/sources.list ? It did work for potato. Is this maybe the mistake that I made - that I need any packages from these sites ?? TIA Philipp Kent West wrote: > Philipp Bliedung wrote: > > > Hi > > > > I have a problem. I'm on a potato machine with xfree 4.0.2 installed. > > Everything was working fine until I installed Gimp 1.2 from woody. > > I added the woody tree to /etc/apt/sources.list and did an apt-get > > install gimp1.2 gimp1.2-perl and installed a whole bunch of packages. > > Well, that did work out fine too! And Gimp 1.2 is running just fine > > until I did a restart on my machine. > > I can't start X anymore. When I do startx I get this: > > > > $startx > > X: cannot stat /etc/X11/X (No such file or directory), aborting. > > xinit: unexpected signel 2 > > $ > > > > What am I missing or what am I doing wrong here? > > When I do XF86Setup it gives just a grey screen. That's it. > > > > Any help is highly appreciated! > > Philipp > > > > > > > > I believe this is a bug in one of the packages. /etc/X11/X should be a > link, like so: > > lrwxrwxrwx1 root root 20 Dec 10 17:19 /etc/X11/X -> > /usr/bin/X11/XFree86 > > Create the link with > ln -s /usr/bin/X11/XFree86 /etc/X11/X > and you should be in business. This assumes that you're using the > XFree86 server. > > Kent >
(partly solved)Re: help! can't start X anymore
Thanks to everybody who replied, I got X working :) I just didn't upgrade all the XFree86 packages - that was kinda stupid, oh well... My desktop is 'working' now - but it's totally messed up! When it starts I get this message: "You are not running a GNOME Compilant Window Manager. GNOME support by the winodw manager is strongly recommended for proper Desk Guide operation." I did an apt-get install sawmill-gnome - but I still get this! There are also no buttons ontop of every window to maximize, close or minimize it. I was using sawmill before I tried to upgrade some packages in order to get Gimp 1.2 running. And now I'm here having a totally messed up desktop. Any ideas? - any help appreciated! TIA Philipp
Re: help! can't start X anymore
Thanks for that hint :) How do I "fix" that - I mean I didn't want any packages from sid - I just wanted everything that goes along with libc6 in order to get Gimp 1.2 running! Do I have to do the whole downloading stuff again (I just have a 56k modem) but now from woody - what I initially intented to do? What would be the best way out of this?? Since the rest of my system (about 90%) is on potato - and I can't and don't want to upgrade to woddy or sid right now !! I have to get some work done... How would /etc/apt/sources.list look like for me now ? Thanks for any help! Philipp Marc Wilson wrote: > You didn't install from Woody... you installed from Sid (Woody is 'testing', > not 'unstable'). This probably means you just inherited XFree 4.0.2 and > attendant programs, along with the problems that go with them. The GIMP in > unstable is dependent on XF402, along with the new libc6, I think. Your > Potato system must be in an interesting condition at the moment. ^_^ > > You can try installing 'task-x-window-system' to get everything that goes > with an XF402 install, if that's actually what happened. Take a look and > see. > > - > Marc Wilson > [EMAIL PROTECTED] > [EMAIL PROTECTED] > http://www.moonkingdom.net/mwilson > > -Original Message- > From: Philipp Bliedung [mailto:[EMAIL PROTECTED] > Sent: Monday, April 16, 2001 1:20 AM > To: Kent West > Cc: debian-user > Subject:Re: help! can't start X anymore > > I don't have a file named X in /etc/X11. I believe that's what it's > complainig > about when I do startx. There is a file named X in /usr/bin/X11 but when I > do ./X > then I get the same error messages as startx would give me. > I don't have a file named XFree86 in /usr/bin/X11/ > > Besides there another thing - I'm not sure if it has anything to do with it, > but > it might. When I tried to get the packages from woody I wrote that into my > /etc/apt/sources.list: > > > deb http://http.us.debian.org/debian unstable main contrib non-free > deb http://non-us.debian.org/debian-non-US unstable/non-US main contrib > non-free > deb http://security.debian.org unstable/updates main contrib non-free > deb http://http.us.debian.org/debian unstable main contrib non-free > deb http://security.debian.org/debian-security unstable/updates main > > when I did apt-get update it got me this: > > W: Couldn't stat source package list 'http://security.debian.org > unstable/updates/main Packages' > (/var/state/apt/lists/security.debian.org_dists_unstable_updates_main_binary > -i386_Packages) > > - stat (2 No such file or directory) > W: Couldn't stat source package list 'http://security.debian.org > unstable/updates/contrib Packages' > (/var/state/apt/lists/security.debian.org_dists_unstable_updates_contrib_bin > ary-i386_Packages) > > - stat (2 No such file or directory) > W: Couldn't stat source package list 'http://security.debian.org > unstable/updates/non-free Packages' > (/var/state/apt/lists/security.debian.org_dists_unstable_updates_non-free_bi > nary-i386_Packages) > > - stat (2 No such file or directory) > W: Couldn't stat source package list 'http://security.debian.org > unstable/updates/main Packages' > (/var/state/apt/lists/security.debian.org_debian-security_dists_unstable_upd > ates_main_binary-i386_Packages) > > - stat (2 No such file or directory) > W: You may want to run apt-get update to correct these missing files > E: Some index files failed to download, they have been ignored, or old > ones used instead. > > I still downloaded the packages! I'm not sure if I need packages from these > sites, since I didn't couldn't access them. What did I wrong in my > /etc/sources.list ? It did work for potato. > Is this maybe the mistake that I made - that I need any packages from these > sites ?? > > TIA > Philipp > Kent West wrote: > > > Philipp Bliedung wrote: > > > > > Hi > > > > > > I have a problem. I'm on a potato machine with xfree 4.0.2 installed. > > > Everything was working fine until I installed Gimp 1.2 from woody. > > > I added the woody tree to /etc/apt/sources.list and did an apt-get > > > install gimp1.2 gimp1.2-perl and installed a whole bunch of packages. > > > Well, that did work out fine too! And Gimp 1.2 is running just fine > > > until I did a restart on my machine. > > > I can't start X anymore. When I do startx I get this: > > > > > > $startx > > > X: cannot stat /etc/X11/X (No such file or director
Re: help! can't start X anymore
I got X working !!! :) well just IceWM is working - but that's ok there are still some error messages from some programs - I don't know how to fix them! Warning: Color name "black" is not defined Warning: Color name "red3" is not defined Warning: Color name "green3" is not defined Warning: Color name "yellow3" is not defined Warning: Color name "blue3" is not defined Warning: Color name "magenta3" is not defined Warning: Color name "cyan3" is not defined Warning: Color name "gray90" is not defined Warning: Color name "gray30" is not defined Warning: Color name "red" is not defined Warning: Color name "green" is not defined Warning: Color name "yellow" is not defined Warning: Color name "blue" is not defined Warning: Color name "magenta" is not defined Warning: Color name "cyan" is not defined Warning: Color name "white" is not defined or this can't parse black can't parse white What does that mean - any ideas how to fix this? when I try to run XF86Setup I get this: #XF86Setup Warning CHIPSET specification missing in Card database entry S3 Savage4 (line 1442). Warning SERVER specification missing in Card database entry Trident TGUI9420 (generic) (line 2186). Warning SERVER specification missing in Card database entry Trident TGUI9440 (generic) (line 2191). Warning SERVER specification missing in Card database entry Trident TGUI9660 (generic) (line 2196). Warning SERVER specification missing in Card database entry Trident TGUI9680 (generic) (line 2201). Warning SERVER specification missing in Card database entry Trident Cyber 9320 (generic) (line 2218). Warning SERVER specification missing in Card database entry Trident Cyber 939a (generic) (line 2241). Warning SERVER specification missing in Card database entry Trident Cyber 9520 (generic) (line 2252). Warning SERVER specification missing in Card database entry Trident Providia 9682 (generic) (line 2275). Warning SERVER specification missing in Card database entry Trident Providia 9685 (generic) (line 2280). Warning CHIPSET specification missing in Card database entry Intel 810 (line 2919). Warning CHIPSET specification missing in Card database entry Intel 740 (generic) (line 2925). Segmentation fault /home/user1# Could it be that I miss some xserver packages? Right now I just have xserver-svga and xserver-vga16 installed. when I start SuperProbe it gives me this: First video: Super-VGA Chipset: Yamaha 6388 VPDC (Port Probed) RAMDAC: Generic 8-bit pseudo-color DAC (with 6-bit wide lookup tables (or in 6-bit mode) home/user1# does that mean I'm running the xserver in 8-bit mode? TIA!! Philipp
Can't parse color "Black"
Hi I installed XFree 4.0.2 and some other packages to my potato box from woody (mainly because of Gimp 1.2) - but now I get this message when I try to start some programs: Application initialization failed: unknown color name "Black" or this error: Color name "black" is not defined can't parse color blak Most of the programs do work. What package do I miss? What does it mean 'can't parse color black'? Thanks, Philipp
Re: Can't parse color "Black"
sorry for posting to an existing thread - but your hint with the symlink did the trick !! Thank you very much! Philipp "Karsten M. Self" wrote: > on Tue, May 08, 2001 at 09:27:14PM +0200, Philipp Bliedung ([EMAIL > PROTECTED]) wrote: > > Don't reply to an existing thread when starting a new topic. Your > message is threaded beneath a discussion on licensing terminology. > > > Hi > > > > I installed XFree 4.0.2 and some other packages to my potato box from woody > > (mainly because of Gimp 1.2) - but now I get this message when I try to > > start > > some programs: > > > > Application initialization failed: unknown color name "Black" > > or this error: > > Color name "black" is not defined > > can't parse color blak > > > > Most of the programs do work. > > What package do I miss? > > What does it mean 'can't parse color black'? > > > > Thanks, > > Philipp > > Do you have /etc/X11/rgb.txt and a symlink to it under > /usr/X11R6/lib/X11? > > -- > Karsten M. Self http://kmself.home.netcom.com/ > What part of "Gestalt" don't you understand? There is no K5 cabal > http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org > > >Part 1.2Type: application/pgp-signature
nautilus 1.0.3-2 won't start
hi I apt-get nautilus from unstable and the installation went without any errors, but when I try to start it I get this error message: nautilus: error while loading shared libraries: cannot open shared object file: cannot load shared object file: No such file or directory error while loading shared libraries: nautilus: undefined symbol: xmlCheckVersion which package am I missing? What does the xmlCheck mean? (originally I'm on a potato machine but I have A LOT of stuff from unstable, which I need for games and multimedia - so it could well be that there is a package that I miss ... or maybe two ...) any ideas? thanks Philipp
Re: nautilus 1.0.3-2 won't start
Erik Steffl wrote: > Philipp Bliedung wrote: > > > > hi > > > > I apt-get nautilus from unstable and the installation went without any > > errors, but when I try to start it I get this error message: > > > > nautilus: error while loading shared libraries: cannot open shared > > object file: cannot load shared object file: No such file or directory > > error while loading shared libraries: nautilus: undefined symbol: > > xmlCheckVersion > > it works here on 'pure' unstable, just installed it. > > which package am I missing? What does the xmlCheck mean? > > (originally I'm on a potato machine but I have A LOT of stuff from > > unstable, which I need for games and multimedia - so it could well be > > that there is a package that I miss ... or maybe two ...) > > then why not have unstable? b/c I need this machine to at least do some work for school and I just have a 56K modem at home and it's a real _pain_ to download many packages besides it'll get very expensive ... (welcome to Germany - I don't have a flat rate yet :) So I'm happy to have some packages on CD (woody and potato) but unstable is changing too fast for me to keep up with it every day :( When I stayed in America it wasn't a problem but now Anyway, I tried to compile nautilus from source but I got an error message that I'd need the new freetpe packages - so I downloaded freetype-2.0.2 and compiled it and made 'make install' but when I tried to compile nautilus again I get the same message. How can that be? philipp
Re: nautilus 1.0.3-2 won't start
Hi, I managed to to get one step further in compiling nautilus ... But what does that mean? checking for GNOME - version >= 1.2.8... yes checking for additional GNOME modules... *** gnomecanvaspixbuf library is not installed configure: error: *** GNOME 1.2.8 or better is required. I have 'libgdk-pixbuf-gnome2-0.11.0-1' and 'libgdk-pixbuf2-0.11.0-1' installed and compiled 'gdk-pixbuf-0.9.0 ' successfuly - obviously that's not everything that I need. What else could cause this message? TIA, Philipp
Re: nautilus 1.0.3-2 won't start
thanks! libgdk-pixbuf-dev was the package I needed. It's not yet working but I'm on the right track- there are a lot more packages I need ... but I'll get there ... Philipp Simeon Walker wrote: > Hi, > i've been trying to compile nautilus from cvs (no luck yet) but > did get it to configure. This is what happens when I try to 'make' it. > > Making all in intl > make[2]: Entering directory `/home/sim/Sources/nautilus/intl' > make[2]: *** No rule to make target [EMAIL PROTECTED]@', > needed by > `all-no'. Stop. > > I think you need the matching -dev packages, i.e. > libgdk-pixbuf-gnome-dev, > libgdk-pixbuf-dev and whatever else it complains about (for you) next. > > Sim > > Philipp Bliedung wrote: > > > > Hi, > > > > I managed to to get one step further in compiling nautilus ... > > But what does that mean? > > > > checking for GNOME - version >= 1.2.8... yes > > checking for additional GNOME modules... *** gnomecanvaspixbuf library > > is not installed > > configure: error: *** GNOME 1.2.8 or better is required. > > > > I have 'libgdk-pixbuf-gnome2-0.11.0-1' and 'libgdk-pixbuf2-0.11.0-1' > > installed and compiled 'gdk-pixbuf-0.9.0 ' successfuly - obviously > > that's not everything that I need. > > What else could cause this message? > > > > TIA, > > Philipp > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- > Simeon Walker, email: [EMAIL PROTECTED] > School of Biological Sciences, phone: +44 (0)1248 383702 > University of Wales, Bangor,fax: +44 (0)1248 382569 > Gwynedd, LL57 2UW, UK. www: http://biology.bangor.ac.uk/ > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
a rather simple question
hi I have jdk-1.1.8-3 installed right now. I want to update to jdk-1.2.2 so I got the tar.gz file. Now my question: how can I _replace_ the old by the new? For jdk-1.1.8-3 I uesed apt-get and it told me to get the jdk-1.1.8-3 tar.gz file and installed it. How can I replace this version by the new one? I didn't find a package that does that. Thanks, Philipp
Re: a rather simple question
thanks a lot! philipp Eric Richardson wrote: > Philipp Bliedung wrote: > > > > hi > > > > I have jdk-1.1.8-3 installed right now. I want to update to jdk-1.2.2 so > > I got the tar.gz file. > > Now my question: how can I _replace_ the old by the new? > > For jdk-1.1.8-3 I uesed apt-get and it told me to get the jdk-1.1.8-3 > > tar.gz file and installed it. How can I replace this version by the > > new one? I didn't find a package that does that. > > Hi, > If you would like to try the blackdown jdk1.3, you could add the > following to your /etc/apt/sources.list > > # for blackdown jdk > ftp://metalab.unc.edu/pub/linux/devel/lang/java/blackdown.org/debian > potato non-free > > Then do a apt-get update; apt-get install j2sdk1.3 > > Other mirrors are available at > http://www.blackdown.org/java-linux/mirrors.html > for potato and woody. > Java3D and some other packages are available too. > > Hope this helps, > Eric > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
problem running xf86cfg
hi I just upgraded to XFree 4.0.3 but when I try tu run xf86cfg I get this error message: Xserver is running an old XFree86-VidModeExtension version (0.8) Minimum required version is 2.0 Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.3 XFree86 XInput driver : 0.1 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 Loader running on linux Illegal instruction Any ideas how I can fix this? BTW what does the VidModeExtension do? TIA, Philipp
Re: problem running xf86cfg
Philipp Bliedung wrote: > hi > > I just upgraded to XFree 4.0.3 but when I try tu run xf86cfg I get this > error message: > > Xserver is running an old XFree86-VidModeExtension version (0.8) > Minimum required version is 2.0 > Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.3 > XFree86 XInput driver : 0.1 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.2 > Loader running on linux > Illegal instruction > > Any ideas how I can fix this? > BTW what does the VidModeExtension do? Even running XF86Setup gives me this: Warning CHIPSET specification missing in Card database entry S3 Savage4 (line 1442). Warning SERVER specification missing in Card database entry Trident TGUI9420 (generic) (line 2186). Warning SERVER specification missing in Card database entry Trident TGUI9440 (generic) (line 2191). Warning SERVER specification missing in Card database entry Trident TGUI9660 (generic) (line 2196). Warning SERVER specification missing in Card database entry Trident TGUI9680 (generic) (line 2201). Warning SERVER specification missing in Card database entry Trident Cyber 9320 (generic) (line 2218). Warning SERVER specification missing in Card database entry Trident Cyber 939a (generic) (line 2241). Warning SERVER specification missing in Card database entry Trident Cyber 9520 (generic) (line 2252). Warning SERVER specification missing in Card database entry Trident Providia 9682 (generic) (line 2275). Warning SERVER specification missing in Card database entry Trident Providia 9685 (generic) (line 2280). Warning CHIPSET specification missing in Card database entry Intel 810 (line 2919). Warning CHIPSET specification missing in Card database entry Intel 740 (generic) (line 2925). Segmentation fault Well, the xserver is up and running but these error shouldn't be there - besides I can't change the configuration (except I do it by hand) has anybody a clue what can cause this and how it might be resolved? Thanks Philipp
Re: problem running xf86cfg
Andrea Vettorello wrote: > Philipp Bliedung wrote: > > > hi > > > > I just upgraded to XFree 4.0.3 but when I try tu run xf86cfg I get this > > error message: > > > > [...] > > > > > > > Any ideas how I can fix this? > > BTW what does the VidModeExtension do? > > > > Don't know if this can helps, but you could try using xf86cfg in textmode > running "xf86cfg -textmode", try looking in the man page for further > options... > > Andrea Yes, "xf86cfg -textmode" works. Thanks! But I still can't figure out why I get this error. Philipp
Re: problem running xf86cfg
why do I get this? [EMAIL PROTECTED]:~ xfree86 --configure bash: xfree86: command not found why is that? Is there a package that doesn't automatically gets updated when I run apt-get install xfree86-common xserver-xfree86 . ? Philipp techlists wrote: > XFree86 4.+ quit using xf86config, if you look at the install directions on > xfree86.org > beginning with xfree86 4.0 you should use the command > > xfree86 --configure > > wayne > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Philipp > Bliedung > Sent: Sunday, May 27, 2001 12:24 PM > To: Andrea Vettorello > Cc: debian-user@lists.debian.org > Subject: Re: problem running xf86cfg > > Andrea Vettorello wrote: > > > Philipp Bliedung wrote: > > > > > hi > > > > > > I just upgraded to XFree 4.0.3 but when I try tu run xf86cfg I get this > > > error message: > > > > > > > [...] > > > > > > > > > > > Any ideas how I can fix this? > > > BTW what does the VidModeExtension do? > > > > > > > Don't know if this can helps, but you could try using xf86cfg in textmode > > running "xf86cfg -textmode", try looking in the man page for further > options... > > > > Andrea > > Yes, "xf86cfg -textmode" works. Thanks! > But I still can't figure out why I get this error. > > Philipp > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED]
Re: problem running xf86cfg
thanks, that did it. Philipp Amardeep Singh wrote: > better try > XFree86 -configure > > On Mon, 28 May 2001, Philipp Bliedung wrote: > > > why do I get this? > > > > [EMAIL PROTECTED]:~ xfree86 --configure > > bash: xfree86: command not found > > > > why is that? > > Is there a package that doesn't automatically gets updated when I run > > apt-get > > install xfree86-common xserver-xfree86 . ? > > > > Philipp > > > > techlists wrote: > > > > > XFree86 4.+ quit using xf86config, if you look at the install directions > > > on > > > xfree86.org > > > beginning with xfree86 4.0 you should use the command > > > > > > xfree86 --configure > > > > > > wayne > > > > > > -Original Message- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Philipp > > > Bliedung > > > Sent: Sunday, May 27, 2001 12:24 PM > > > To: Andrea Vettorello > > > Cc: debian-user@lists.debian.org > > > Subject: Re: problem running xf86cfg > > > > > > Andrea Vettorello wrote: > > > > > > > Philipp Bliedung wrote: > > > > > > > > > hi > > > > > > > > > > I just upgraded to XFree 4.0.3 but when I try tu run xf86cfg I get > > > > > this > > > > > error message: > > > > > > > > > > > > > [...] > > > > > > > > > > > > > > > > > > > Any ideas how I can fix this? > > > > > BTW what does the VidModeExtension do? > > > > > > > > > > > > > Don't know if this can helps, but you could try using xf86cfg in > > > > textmode > > > > running "xf86cfg -textmode", try looking in the man page for further > > > options... > > > > > > > > Andrea > > > > > > Yes, "xf86cfg -textmode" works. Thanks! > > > But I still can't figure out why I get this error. > > > > > > Philipp > > > > > > -- > > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > > with a subject of "unsubscribe". Trouble? Contact > > > [EMAIL PROTECTED] > > > > > > > > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
trouble adding window manager to GDM
Hello, I am running Debian unstable and updated to Gnome 2.6 this past weekend. After the update (and an update to the newest version of gdm 2.4.4.7-3) I can't select any other window managers from the GDM login-screen. I want to add blackbox and Xfce4. I created a file named "Blackbox" in /etc/gdm/Sessions/ and added exec /usr/bin/blackbox I made this file executable (chmod 755), but when I log off and restart gdm I only have the same options I had before. I can't choose anything other that Gnome. Any ideas? Thanks a lot. Philipp -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: trouble adding window manager to GDM
[EMAIL PROTECTED] wrote: On Monday 14 June 2004 18:30, Philipp Bliedung wrote: Hello, I am running Debian unstable and updated to Gnome 2.6 this past weekend. After the update (and an update to the newest version of gdm 2.4.4.7-3) I can't select any other window managers from the GDM login-screen. I want to add blackbox and Xfce4. The new version of GDM uses /etc/dm/Sessions/*.desktop files. Here's my xfce4.desktop file, for example: [Desktop Entry] Name=Xfce4 Comment=Xfce4 Exec=/usr/bin/xfce4-session # no icon yet, only the top three are currently used Icon= Type=Application Thanks a lot. ..That was what I was looking for ... now I have blackbox and xfce4 in the window-manager selection. thanks again, Philipp -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
problems installing and starting nicotine
hi, I am running Debian woody with a few packages from unstable (like python and libc6). I was trying to install "nicotine" and I pointed my sources.list to Debian unstable to get all the necessary packages and I installed python 2.3, libc6 2.3.2, nicotine and all that. When I want to start nicotine it gives me this error: Traceback (most recent call last): File "/usr/bin/nicotine", line 143, in ? result = checkenv() File "/usr/bin/nicotine", line 69, in checkenv import gtk File "/usr/lib/python2.3/site-packages/gtk-2.0/gtk/__init__.py", line 43, in ? from _gtk import * ImportError: /usr/lib/libpangoxft-1.0.so.0: undefined symbol: FT_Seek_Stream What am I missing here? I have libc6 2.3.2-7, python 2.3, gtk2 (because of Gnome 2.2) and python-gtk2 installed Thanks a lot in advance!! Philipp Bliedung -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: problems installing and starting nicotine
[EMAIL PROTECTED] wrote: On Fri, 2003-10-03 at 10:45, Philipp Bliedung wrote: hi, I am running Debian woody with a few packages from unstable (like python and libc6). I was trying to install "nicotine" and I pointed my sources.list to Debian unstable to get all the necessary packages and I installed python 2.3, libc6 2.3.2, nicotine and all that. When I want to start nicotine it gives me this error: Traceback (most recent call last): File "/usr/bin/nicotine", line 143, in ? result = checkenv() File "/usr/bin/nicotine", line 69, in checkenv import gtk File "/usr/lib/python2.3/site-packages/gtk-2.0/gtk/__init__.py", line 43, in ? from _gtk import * ImportError: /usr/lib/libpangoxft-1.0.so.0: undefined symbol: FT_Seek_Stream What am I missing here? fontconfig >= 2.1 Installing fontconfig >= 2.1 and libpango1.0 did the trick Thanks a lot, Philipp Jamie -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Grafische Benutzeroberfläche
this is an english speaking list, so please post in english . regarding your question: running "startx" should be enough to switch to X. if it doesn't work, check if you have "xserver-xfree86" installed. A simple "apt-get install xserver-xfree86" should do it . If you still have trouble, post again with some error messages... Philipp now in german: Eigentlich sollte "startx" ausreichen um die grafishe Benutzeroberfläche zu starten. An sonsten würde ich nachschauen ob "xserver-xfree86" installiert ist. Wenn nicht, einfach mit "apt-get install xserver-xfree86" installieren. Wenn trotzdem noch Probleme gibt, einfach noch einmal mit der Fehlermeldung posten Philipp Hallo Debianteam !!! Linux ist für mich eigentlich Neuland, ich habe vorher schon einwenig mit SUSE 8.0 gespielt . Jetzt habe ich von den vorteilen von eurem System gehört . Ich habe mir eure neue Version gekauft und Installiert . Es hört sich vieleicht komisch an, ich komme aber nicht in dem Grafischen Desktop. mit welchen Befehl kann ich denn die Grafische Benutzeroberfläche Starten ? Der Prompt ist da .Leider kann ich dieses aus der Dokumetation nicht rauslesen .Oder habe ich bei der Installation etwas falsch gemacht .Bei Suse kann ich ja zwischen der Grafischen und dem Eingabe Prompt wescheln. Für Eure Bemühungen bedanke ich mich im vorraus mfg Carsten -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Grafische Benutzeroberfläche
Hi Carten, You might also want to try the "debian-user-german" mailing list if you encounter any further problems ... http://lists.debian.org/debian-user-german/ Philipp - Hi Carten, die debian-user Mailing Liste gibt es auch in deutsch: "debian-user-german" --> http://lists.debian.org/debian-user-german/ Grüße, Philipp Hallo Debianteam !!! Linux ist für mich eigentlich Neuland, ich habe vorher schon einwenig mit SUSE 8.0 gespielt . Jetzt habe ich von den vorteilen von eurem System gehört . Ich habe mir eure neue Version gekauft und Installiert . Es hört sich vieleicht komisch an, ich komme aber nicht in dem Grafischen Desktop. mit welchen Befehl kann ich denn die Grafische Benutzeroberfläche Starten ? Der Prompt ist da .Leider kann ich dieses aus der Dokumetation nicht rauslesen .Oder habe ich bei der Installation etwas falsch gemacht .Bei Suse kann ich ja zwischen der Grafischen und dem Eingabe Prompt wescheln. Für Eure Bemühungen bedanke ich mich im vorraus mfg Carsten -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]