Re: [Elecraft] KX3 ATU not inst
On Apr 17, 2014, at 9:23 PM, Phil Wheeler w...@socal.rr.com wrote: Err .. KXPA100! On 4/17/14, 9:08 PM, Phil Wheeler wrote: The obvious fix is to satisfy your KX3's craving by adding a KXPA3 :-) 73, Phil Aaaah! So you mean it is the KX3 that craves and not what is between the PTT button and the chair? :) — VaibhaV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 ATU not inst
All of the sudden my KX3's ATU cannot be seen by the radio and I can't figure out why. I went to the menu ATU.X MD and it says not inst and when I try to change the mode, it just says N/A. I tried pulling the ATU out and put it back in, which didn't help. It was working just fine since the day it was installed until tonight. Any thoughts before I call support? Thx, Tim -- Owner, worldwidedx.com AE6LX, Amateur Radio NNN0ITA, Navy MARS NNN0GAF FOUR, Southern CA Director Assistant for Training, Navy MARS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 ATU not inst
Check the PA Mode in the menu and be sure it is set to OFF if you don't have a KXPA100 attached. Mark KE6BB From: Tim Tuckerae...@worldwidedx.com Sent: Thu, Apr 17, 2014 at 05:26 PM To: Elecraft Reflector elecraft@mailman.qth.net Subject: [Elecraft] KX3 ATU not inst All of the sudden my KX3's ATU cannot be seen by the radio and I can't figure out why. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 ATU not inst
On 4/17/2014 8:25 PM, Tim Tucker wrote: All of the sudden my KX3's ATU cannot be seen by the radio and I can't figure out why. I went to the menu ATU.X MD and it says not inst and when I try to change the mode, it just says N/A. I tried pulling the ATU out and put it back in, which didn't help. It was working just fine since the day it was installed until tonight. Any thoughts before I call support? Thx, Tim I just went through the same thing with my KX3. The problem was caused by HRD. If you're using HRD try moving the Low Pwr Slider to 12Watts and see if that does the trick. You will see ATU on the KX3's screen. Also the KX3 menu will drop the .X and become just ATU MD. I really like HRD for logging but it doesn't get along with KX3 very well. 73 Stew ke4yh __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 ATU not inst
On Apr 17, 2014, at 5:53 PM, Stew s...@ke4yh.com wrote: On 4/17/2014 8:25 PM, Tim Tucker wrote: All of the sudden my KX3's ATU cannot be seen by the radio and I can't figure out why. I went to the menu ATU.X MD and it says not inst and when I try to change the mode, it just says N/A. I tried pulling the ATU out and put it back in, which didn't help. It was working just fine since the day it was installed until tonight. Any thoughts before I call support? Thx, Tim I just went through the same thing with my KX3. The problem was caused by HRD. If you're using HRD try moving the Low Pwr Slider to 12Watts and see if that does the trick. You will see ATU on the KX3's screen. Also the KX3 menu will drop the .X and become just ATU MD. I really like HRD for logging but it doesn't get along with KX3 very well. I had posted the same issue on this list just two weeks ago. This has been reported to HRD and will be fixed in the next version. If you don’t touch the “high Pwr Slider”, the KX3 works OK with HRD. DM780 hangs when asked to transmit through rig blaster advantage + KX3, but that is a non-KX3 issue. — VaibhaV W7VAI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 ATU not inst
All, Lyle emailed me 2 minutes after I posted this and pointed me in the right direction (Thanks Lyle!) The problem was that at some point I had accidentally bumped the setting in the config to tell the radio that I had the KXPA100 installed, which I don't. As soon as I turned that off, everything was back to normal. Tim On Thu, Apr 17, 2014 at 7:46 PM, VaibhaV Sharma vaib...@vaibhavsharma.comwrote: On Apr 17, 2014, at 5:53 PM, Stew s...@ke4yh.com wrote: On 4/17/2014 8:25 PM, Tim Tucker wrote: All of the sudden my KX3's ATU cannot be seen by the radio and I can't figure out why. I went to the menu ATU.X MD and it says not inst and when I try to change the mode, it just says N/A. I tried pulling the ATU out and put it back in, which didn't help. It was working just fine since the day it was installed until tonight. Any thoughts before I call support? Thx, Tim I just went through the same thing with my KX3. The problem was caused by HRD. If you're using HRD try moving the Low Pwr Slider to 12Watts and see if that does the trick. You will see ATU on the KX3's screen. Also the KX3 menu will drop the .X and become just ATU MD. I really like HRD for logging but it doesn't get along with KX3 very well. I had posted the same issue on this list just two weeks ago. This has been reported to HRD and will be fixed in the next version. If you don’t touch the “high Pwr Slider”, the KX3 works OK with HRD. DM780 hangs when asked to transmit through rig blaster advantage + KX3, but that is a non-KX3 issue. — VaibhaV W7VAI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ae...@worldwidedx.com -- Owner, worldwidedx.com AE6LX, Amateur Radio NNN0ITA, Navy MARS NNN0GAF FOUR, Southern CA Director Assistant for Training, Navy MARS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 ATU not inst
The obvious fix is to satisfy your KX3's craving by adding a KXPA3 :-) 73, Phil On 4/17/14, 8:22 PM, Tim Tucker wrote: All, Lyle emailed me 2 minutes after I posted this and pointed me in the right direction (Thanks Lyle!) The problem was that at some point I had accidentally bumped the setting in the config to tell the radio that I had the KXPA100 installed, which I don't. As soon as I turned that off, everything was back to normal. Tim On Thu, Apr 17, 2014 at 7:46 PM, VaibhaV Sharma vaib...@vaibhavsharma.comwrote: On Apr 17, 2014, at 5:53 PM, Stew s...@ke4yh.com wrote: On 4/17/2014 8:25 PM, Tim Tucker wrote: All of the sudden my KX3's ATU cannot be seen by the radio and I can't figure out why. I went to the menu ATU.X MD and it says not inst and when I try to change the mode, it just says N/A. I tried pulling the ATU out and put it back in, which didn't help. It was working just fine since the day it was installed until tonight. Any thoughts before I call support? Thx, Tim I just went through the same thing with my KX3. The problem was caused by HRD. If you're using HRD try moving the Low Pwr Slider to 12Watts and see if that does the trick. You will see ATU on the KX3's screen. Also the KX3 menu will drop the .X and become just ATU MD. I really like HRD for logging but it doesn't get along with KX3 very well. I had posted the same issue on this list just two weeks ago. This has been reported to HRD and will be fixed in the next version. If you don’t touch the “high Pwr Slider”, the KX3 works OK with HRD. DM780 hangs when asked to transmit through rig blaster advantage + KX3, but that is a non-KX3 issue. — VaibhaV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 ATU not inst
Err .. KXPA100! On 4/17/14, 9:08 PM, Phil Wheeler wrote: The obvious fix is to satisfy your KX3's craving by adding a KXPA3 :-) 73, Phil On 4/17/14, 8:22 PM, Tim Tucker wrote: All, Lyle emailed me 2 minutes after I posted this and pointed me in the right direction (Thanks Lyle!) The problem was that at some point I had accidentally bumped the setting in the config to tell the radio that I had the KXPA100 installed, which I don't. As soon as I turned that off, everything was back to normal. Tim __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com