Re: Adjacent Channel Power Measuring Equipment

2000-06-29 Thread Ralph Cameron

Paul:

Tektronix has a good application note covering measurement of adjacent
channel power.   I am not sure but I don't think the 8566B can be triggered
to perform such measurements, I've been away from the field a little too
long . Tek markets the Rhode and Schwartz products and most modern spectrum
analyzers have that capability.  A call to the local office should get you
some help.

Ralph Cameron
EMC Consultant forSuppression of Consumer Electronics
(After sale)

- Original Message -
From: "Paul Slavens" 
To: 
Sent: Wednesday, June 28, 2000 5:28 PM
Subject: Adjacent Channel Power Measuring Equipment


>
> Hello Group,
>
> I am having a little trouble with section 8.5 (adjacent channel power) of
> ETSI EN 300 220-1.  Specifically, I am having difficulty understanding the
> requirements for the power-measuring receiver defined in Annex B.  My
> questions are:
>
> 1. Is the HP EMI rack, consisting of an 8566B spectrum analyzer, an 85685A
> RF pre-selector, and an 85650A quasi-peak adapter a suitable instrument
for
> making adjacent channel power measurements?
>
> 2. If the HP EMI rack will not properly measure adjacent channel power per
> ETSI EN 300 220-1, what instrument or instruments will?
>
> If anyone could help shed a little light on the above question, I would be
> most thankful.
>
> Regards,
>
> Paul Slavens
>
> 
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>
> ---
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> To cancel your subscription, send mail to:
>  majord...@ieee.org
> with the single line:
>  unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
>  Jim Bacher:  jim_bac...@mail.monarch.com
>  Michael Garretson:pstc_ad...@garretson.org
>
> For policy questions, send mail to:
>  Richard Nute:   ri...@ieee.org
>
>
>


---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

To cancel your subscription, send mail to:
 majord...@ieee.org
with the single line:
 unsubscribe emc-pstc

For help, send mail to the list administrators:
 Jim Bacher:  jim_bac...@mail.monarch.com
 Michael Garretson:pstc_ad...@garretson.org

For policy questions, send mail to:
 Richard Nute:   ri...@ieee.org



Adjacent Channel Power Measuring Equipment

2000-06-28 Thread Paul Slavens


Hello Group,

I am having a little trouble with section 8.5 (adjacent channel power) of 
ETSI EN 300 220-1.  Specifically, I am having difficulty understanding the 
requirements for the power-measuring receiver defined in Annex B.  My 
questions are:


1. Is the HP EMI rack, consisting of an 8566B spectrum analyzer, an 85685A 
RF pre-selector, and an 85650A quasi-peak adapter a suitable instrument for 
making adjacent channel power measurements?


2. If the HP EMI rack will not properly measure adjacent channel power per 
ETSI EN 300 220-1, what instrument or instruments will?


If anyone could help shed a little light on the above question, I would be 
most thankful.


Regards,

Paul Slavens


Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com


---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc

For help, send mail to the list administrators:
Jim Bacher:  jim_bac...@mail.monarch.com
Michael Garretson:pstc_ad...@garretson.org

For policy questions, send mail to:
Richard Nute:   ri...@ieee.org