Re: [Emc-users] Error on startup Lcnc
I found out that it was entirely hardware problem, because after moving parallel pci card to the other pci slot, it finally started to work. A wild guess might be that the PPMC board is not powered up or not connected? There is a Pico diagnostic program you might try. http://pico-systems.com/codes/univpwmdiags.tgz -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Error on startup Lcnc
On 10/29/2014 02:56 AM, Tomaz T. wrote: I found out that it was entirely hardware problem, because after moving parallel pci card to the other pci slot, it finally started to work. Hmmm, very strange! Well, glad you got it to work! Jon -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Error on startup Lcnc
On 10/29/2014 09:36 AM, Jon Elson wrote: On 10/29/2014 02:56 AM, Tomaz T. wrote: I found out that it was entirely hardware problem, because after moving parallel pci card to the other pci slot, it finally started to work. Hmmm, very strange! Well, glad you got it to work! Jon I think changing slots changes where PCI assigns where the card's base and extended address space? -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/ -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Error on startup Lcnc
On 10/29/2014 11:52 AM, Kirk Wallace wrote: On 10/29/2014 09:36 AM, Jon Elson wrote: On 10/29/2014 02:56 AM, Tomaz T. wrote: I found out that it was entirely hardware problem, because after moving parallel pci card to the other pci slot, it finally started to work. Hmmm, very strange! Well, glad you got it to work! Jon I think changing slots changes where PCI assigns where the card's base and extended address space? PCI does not assign addresses by slot #, but it does enumerate boards in the order of the slots. So, it is possible changing position will change the I/O address of the slot. Also, there are PCI slots with different power supplies and number of data bits, so possibly one slot was not compatible with the parport board. Jon -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Error on startup Lcnc
Anyone have ideas what could be wrong, and causing me this error on Lcnc startup: Debug file information: Can not find -sec APPLICATIONS -var DELAY -num 1 insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/hal_ppmc.ko': -1 Operation not permitted my5axis_load.hal:19: exit value: 1 my5axis_load.hal:19: insmod failed, returned -1 See the output of 'dmesg' for more information. 1614 PID TTY STAT TIME COMMAND Stopping realtime threads Unloading hal components -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Error on startup Lcnc
On 28 October 2014 08:43, Tomaz T. tomaz_...@hotmail.com wrote: See the output of 'dmesg' for more information. What does dmesg say? -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Error on startup Lcnc
On 10/28/2014 01:43 AM, Tomaz T. wrote: Anyone have ideas what could be wrong, and causing me this error on Lcnc startup: Debug file information: Can not find -sec APPLICATIONS -var DELAY -num 1 insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/hal_ppmc.ko': -1 Operation not permitted ... snip A wild guess might be that the PPMC board is not powered up or not connected? There is a Pico diagnostic program you might try. http://pico-systems.com/codes/univpwmdiags.tgz -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/ -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Error on startup Lcnc
On 10/28/2014 03:43 AM, Tomaz T. wrote: Anyone have ideas what could be wrong, and causing me this error on Lcnc startup: Debug file information: Can not find -sec APPLICATIONS -var DELAY -num 1 insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/hal_ppmc.ko': -1 Operation not permitted my5axis_load.hal:19: exit value: 1 my5axis_load.hal:19: insmod failed, returned -1 Oh, my, there are so many things. First, of course, you need to make sure the driver can talk to the Pico Systems device(s). Recent versions of LinuxCNC send more info to the kernel log reporting what they sensed connected to the parallel port. So, do : dmesg | grep PPMC and it will pull only the lines from the ppmc driver out of the thousands of lines in the dmesg file. If no boards are found, then you need to try the diagnostic program to see if communication can be established. I don't know what Pico board you have, so I can't direct you to the correct diag program. Finally, you MUST use an IEEE-1284 cable. Standard DB-25 cables will not work, due to crosstalk. Jon -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users