Re: [fpc-pascal] bug in make install ?
On Sun, Mar 24, 2019 at 6:36 PM Bart wrote: > Sorry, I just never use that stuff in my programs. It seems that when you try to execute a program that writes to console and you specify [poNoconsole] then the program will exit with: Proc.ExitCode=C005, Proc.ExitStatus=C005 -- Bart ___ fpc-pascal maillist - fpc-pascal@lists.freepascal.org http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
Re: [fpc-pascal] bug in make install ?
On Sun, Mar 24, 2019 at 6:10 PM Joost van der Sluis wrote: > > Note: I see several times a window (console?) flash when starting up > > Lazarus now. > > Maybe add poNoConsole to ProcessOptions ? > > It's a bit annoying now. > > Can you test if this actually works on Windows (on Linux this is not an > issue) I added poNoConsole to the 2 occasions of TProcessUtf8 I could fine in InitialSetupDlg, but I still see 2 console windows flashing by. Adding [poNoconsole] may also prevent the program in question to write output to StdOut? But since we're using pipes, that should not matter? Sorry, I just never use that stuff in my programs. Bart -- Bart ___ fpc-pascal maillist - fpc-pascal@lists.freepascal.org http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
Re: [fpc-pascal] bug in make install ?
Op 24-03-19 om 11:48 schreef Bart: On Sun, Mar 24, 2019 at 1:30 AM Bart wrote: Now I get the rather ludicrous error message: "Warning: The fpcmkcfg configuration tool it too old [3.3.1]." In function TInitialSetupDialog.CheckFpcmkcfgQuality(out Note: string): TSDFilenameQuality; else if not ((Ver.Major = 0) or (Ver.Major > 3) or (((Ver.Major = 3)) and (Ver.Minor>3))) then <<= begin // fpcmkcfg's version must be > 3.1. I think the above code checks for 0.x, 4.x and > 3.3.x, which is not what the comment says. Sorry. I had to test the message, so adapted the check so that it needs at least 3.4.0. And accidentally comitted that. I changed that to else if not ((Ver.Major = 0) or (Ver.Major > 3) or (((Ver.Major = 3)) and (Ver.Minor>1))) then Now it lets me create a new Fppkg configuration. Good to hear. Note: I see several times a window (console?) flash when starting up Lazarus now. Maybe add poNoConsole to ProcessOptions ? It's a bit annoying now. Can you test if this actually works on Windows (on Linux this is not an issue) Joost ___ fpc-pascal maillist - fpc-pascal@lists.freepascal.org http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
Re: [fpc-pascal] bug in make install ?
On Sun, Mar 24, 2019 at 1:30 AM Bart wrote: > fpcmkcfg.exe does not support -V parameter Never mind that: it helps if you actually rebuild fpc, not just update the sources ;-) fpcmkcfg -h however does not list the "-V" option. Now I get the rather ludicrous error message: "Warning: The fpcmkcfg configuration tool it too old [3.3.1]." In function TInitialSetupDialog.CheckFpcmkcfgQuality(out Note: string): TSDFilenameQuality; else if not ((Ver.Major = 0) or (Ver.Major > 3) or (((Ver.Major = 3)) and (Ver.Minor>3))) then <<= begin // fpcmkcfg's version must be > 3.1. I think the above code checks for 0.x, 4.x and > 3.3.x, which is not what the comment says. I changed that to else if not ((Ver.Major = 0) or (Ver.Major > 3) or (((Ver.Major = 3)) and (Ver.Minor>1))) then Now it lets me create a new Fppkg configuration. Note: I see several times a window (console?) flash when starting up Lazarus now. Maybe add poNoConsole to ProcessOptions ? It's a bit annoying now. -- Bart ___ fpc-pascal maillist - fpc-pascal@lists.freepascal.org http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
Re: [fpc-pascal] bug in make install ?
Op 24-03-19 om 01:33 schreef Bart: Notice also that when you cancel the InitialSetupDialog, the IDE raises an exception when closing down: LAZARUS END - cleaning up ... [FORMS.PP] ExceptionOccurred Sender=EAccessViolation Exception=Access violation Stack trace: $0056EB8A TWINCONTROL__HANDLEALLOCATED, line 7442 of ./include/wincontrol.inc $0045493A TMAINIDE__SETTOOLSTATUS, line 3611 of main.pp $0044CF1C TMAINIDE__DESTROY, line 1648 of main.pp $0040FDA2 TOBJECT__FREE, line 336 of C:/devel/fpc/trunk/rtl/inc/objpas.inc TApplication.HandleException: EAccessViolation Access violation Stack trace: $0056EB8A TWINCONTROL__HANDLEALLOCATED, line 7442 of ./include/wincontrol.inc $0045493A TMAINIDE__SETTOOLSTATUS, line 3611 of main.pp $0044CF1C TMAINIDE__DESTROY, line 1648 of main.pp $0040FDA2 TOBJECT__FREE, line 336 of C:/devel/fpc/trunk/rtl/inc/objpas.inc TApplication.HandleException: Strange Exception Exception at 0056EB8A: EAccessViolation: Access violation. Stack trace: $0056EB8A TWINCONTROL__HANDLEALLOCATED, line 7442 of ./include/wincontrol.inc $0045493A TMAINIDE__SETTOOLSTATUS, line 3611 of main.pp $0044CF1C TMAINIDE__DESTROY, line 1648 of main.pp $0040FDA2 TOBJECT__FREE, line 336 of C:/devel/fpc/trunk/rtl/inc/objpas.inc Hint: (lazarus) [TMainIDE.Destroy] B -> inherited Destroy... TMainIDE Hint: (lazarus) [TMainIDE.Destroy] END I noticed this also, tried to fix it, but did not succeed so far. (I don't think it has anything to do with my changes, the problem was already there) Regards, Joost. ___ fpc-pascal maillist - fpc-pascal@lists.freepascal.org http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
Re: [fpc-pascal] bug in make install ?
Op 24-03-19 om 01:30 schreef Bart:
On Sat, Mar 23, 2019 at 7:56 PM Bart wrote:
"Warning: Failed to retrieve the version of the fpcmkcfg configuration
tool. It is probably too old to create the configuration files. Make
sure a recent version is installed and available in the path or
alongside the compiler-executable."
Then later in TInitialSetupDialog.CheckFpcmkcfgQuality
TInitialSetupDialog.CheckFpcmkcfgQuality A
FpcmkcfgExecutable=C:\pp\bin\i386-win32\fpcmkcfg.exe
FileExistsUtf8(FpcmkcfgExecutable)=True
Proc.Options := proc.Options + [poWaitOnExit,poUsePipes];
// Write fppkg.cfg
Proc.Executable := FpcmkcfgExecutable;
proc.Parameters.Add('-V');
proc.Execute;
Error: proc.ExitStatus=1
C:\pp\bin\i386-win32>fpcmkcfg -h
Usage: fpcmkcfg.exe [options]
Where options is one or more of
-t filename Template file name. Default is built-in
-o filename Set output file. Default is standard output.
-d name=value define name=value pair.
-hshow this help and exit.
-u name remove name from list of name/value pairs.
-mshow builtin macros and exit.
-bshow builtin template and exit.
-sskip the creation of a backup-file.
-pforce directory creation.
-vbe verbose.
-0use built in fpc.cfg template (default)
-1use built in fp.cfg template
-2use built in fp.ini template
-3use built in fppkg.cfg template
-4use built in fppkg default compiler template
fpcmkcfg.exe does not support -V parameter
fppkg.exe does support -V parameter and shows:
Warning: The directory
"C:\Users\Bart\AppData\Local\FreePascal\fppkg\config/conf.d\" of the
include-mask "C:\Users\Bart\AppData\Local\FreePascal\fppkg\config/conf.d/*.conf"
does not exist
Version: 3.3.1
The -V option has been added in r41742, but it has only been added to
the help-screen in r41771. You have a version which is in between those two.
So can you test 'fpcmkcfg -V'. Seems like this does not work, as in
Lazarus it gives a problem. But given your fpc-revision, it should work?
Regards,
Joost.
___
fpc-pascal maillist - fpc-pascal@lists.freepascal.org
http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
Re: [fpc-pascal] fpdoc: what does the --marco parameter do?
On Sat, 23 Mar 2019, Graeme Geldenhuys wrote: The FPDoc PDF documentation for 3.0.4 doesn't mention it at all. So maybe it is something for 3.2.0 and later only? Yes. The XML project file needs some parametrization - for example the location of the sources. So it contains macros. The --macro option (the name is maybe a little obtuse) is used to replace the parameter name with a parameter value. Michael. ___ fpc-pascal maillist - fpc-pascal@lists.freepascal.org http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
