Re: IOAK282E OSAD Device does not exist for CHPID xx
Chris. You are very clear in your answers and I thank for your help. Gracias. Saludos. Alvaro. -Mensaje original- De: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] En nombre de Chris Mason Enviado el: Miércoles, 20 de Diciembre de 2006 2:50 Para: IBM-MAIN@BAMA.UA.EDU Asunto: Re: IOAK282E OSAD Device does not exist for CHPID xx David I expect Alvaro was using LookAt! The problem with these "IOA" messages is that they have a subtle structure and they are documented in such a way that you cannot find them without using some subterfuge. See the post I have just sent in reply to Alvaro for the full explanation - or - just take a look at Chapter 14 in System z9 and zSeries Open Systems Adapter-Express Customer's Guide and Reference. Chris Mason - Original Message - From: "O'Brien, David W. (NIH/CIT) [C]" <[EMAIL PROTECTED]> Newsgroups: bit.listserv.ibm-main To: Sent: Tuesday, 19 December, 2006 9:27 PM Subject: Re: IOAK282E OSAD Device does not exist for CHPID xx > You must be looking in the wrong manual. > ... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IOAK282E OSAD Device does not exist for CHPID xx
David I expect Alvaro was using LookAt! The problem with these "IOA" messages is that they have a subtle structure and they are documented in such a way that you cannot find them without using some subterfuge. See the post I have just sent in reply to Alvaro for the full explanation - or - just take a look at Chapter 14 in System z9 and zSeries Open Systems Adapter-Express Customer's Guide and Reference. Chris Mason - Original Message - From: "O'Brien, David W. (NIH/CIT) [C]" <[EMAIL PROTECTED]> Newsgroups: bit.listserv.ibm-main To: Sent: Tuesday, 19 December, 2006 9:27 PM Subject: Re: IOAK282E OSAD Device does not exist for CHPID xx > You must be looking in the wrong manual. > ... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IOAK282E OSAD Device does not exist for CHPID xx
Alvaro And normally you would be quite entitled to have not tried IOAx282E or, indeed, IOAx146E. However, since you are an OSA user, you need to become familiar with the sole manual relating to your product, "System z9 and zSeries Open Systems Adapter-Express Customer's Guide and Reference". As soon as you try to find any "IOA" message[1] you are confronted with the following from Chapter 14. OSA/SF Messages and Codes: 2.6.1 OSA/SF Messages Attention ° Message numbers contain a lower case x in this book because the character is a variable. Messages in which the variable would be a G or X are not documented and cannot be viewed in LookAt. The variable is assigned when a component detects the condition. Example: Message number: IOAA954E Documented as: IOAx954E OSA/SF messages have the following format: Example: IOAxnnns IOA The first three characters are the product identifier. If you are looking at the OSA/SF message log, you may see a message without a message ID or with a message ID in the format IOBxnnns. Take the action that is stated explicitly or implicitly by the message text. If the severity level of an IOB message is E or S, report the message to IBM. x Component that detected the condition. In some cases, more than one component can cause OSA/SF to issue the same message; therefore messages are listed in the book with the variable x. If you search for a message and the message is shown with an x, it is the correct description. nnn 3 digit message sequence number. The messages in this book are listed numerically according to these three digits. s The message severity, denoted by one of the following characters: I haven't bothered copying the usual "severity codes". [1] Noting what your error message is I suspect you may just be starting with your OSA so perhaps not being very familiar with the manual is to be expected. Chris Mason - Original Message - From: "Alvaro Quintupray" <[EMAIL PROTECTED]> Newsgroups: bit.listserv.ibm-main To: Sent: Tuesday, 19 December, 2006 10:46 PM Subject: Re: IOAK282E OSAD Device does not exist for CHPID xx > Ohhh .. > > I had looked for message IOAK282E, and I did not think about to look for > with letter "X" > > Thanks. > Alvaro. > > -Mensaje original- > De: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] En nombre de > O'Brien, David W. (NIH/CIT) [C] > Enviado el: Martes, 19 de Diciembre de 2006 16:27 > Para: IBM-MAIN@BAMA.UA.EDU > Asunto: Re: IOAK282E OSAD Device does not exist for CHPID xx > > You must be looking in the wrong manual. The following is from Quickref on a > Zos 1.4 system: > > IOAA282E > > > > IOAx282E > > > > OSAD device does not exist for CHPID cc > > > > Explanation: The OSAD device with unit address X'FE' associated with > the > specified CHPID (cc) has not been defined. > > > > User Response: Perform the following checks and steps: > > > > o Check the I/O definitions in the IODF/IOCDS to ensure an OSAD > device > (X'FE') has been defined for this CHPID. > > o Update and activate the IODF if necessary > > o Display the CHPID and unit status information for CHPID cc > > o Verify the OSAD device is ONLINE > > o Then restart operations on CHPID cc > > > -Original Message- > From: Alvaro Quintupray B. [mailto:[EMAIL PROTECTED] > Sent: Tuesday, December 19, 2006 3:24 PM > To: IBM-MAIN@BAMA.UA.EDU > Subject: IOAK282E OSAD Device does not exist for CHPID xx > > Hi. > > Somebody knows about this ..? > > IOAK282E OSAD device does not exist for CHPID 00 IOAK282E OSAD device does > not exist for CHPID 01 IOAK282E OSAD device does not exist for CHPID 03 > IOAK282E OSAD device does not exist for CHPID 04 IOAK282E OSAD device does > not exist for CHPID 05 IOAC146E 16:59:08 No OSA devices were initialized > > The message does not exist in the manuals .. > > How I can resolve this problem ..? > > Thanks. > Alvaro. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IOAK282E OSAD Device does not exist for CHPID xx
Ohhh .. I had looked for message IOAK282E, and I did not think about to look for with letter "X" Thanks. Alvaro. -Mensaje original- De: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] En nombre de O'Brien, David W. (NIH/CIT) [C] Enviado el: Martes, 19 de Diciembre de 2006 16:27 Para: IBM-MAIN@BAMA.UA.EDU Asunto: Re: IOAK282E OSAD Device does not exist for CHPID xx You must be looking in the wrong manual. The following is from Quickref on a Zos 1.4 system: IOAA282E IOAx282E OSAD device does not exist for CHPID cc Explanation: The OSAD device with unit address X'FE' associated with the specified CHPID (cc) has not been defined. User Response: Perform the following checks and steps: o Check the I/O definitions in the IODF/IOCDS to ensure an OSAD device (X'FE') has been defined for this CHPID. o Update and activate the IODF if necessary o Display the CHPID and unit status information for CHPID cc o Verify the OSAD device is ONLINE o Then restart operations on CHPID cc -Original Message- From: Alvaro Quintupray B. [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 19, 2006 3:24 PM To: IBM-MAIN@BAMA.UA.EDU Subject: IOAK282E OSAD Device does not exist for CHPID xx Hi. Somebody knows about this ..? IOAK282E OSAD device does not exist for CHPID 00 IOAK282E OSAD device does not exist for CHPID 01 IOAK282E OSAD device does not exist for CHPID 03 IOAK282E OSAD device does not exist for CHPID 04 IOAK282E OSAD device does not exist for CHPID 05 IOAC146E 16:59:08 No OSA devices were initialized The message does not exist in the manuals .. How I can resolve this problem ..? Thanks. Alvaro. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IOAK282E OSAD Device does not exist for CHPID xx
NOTICE: All information in and attached to the e-mail(s) below may be proprietary, confidential, privileged and otherwise protected from improper or erroneous disclosure. If you are not the sender's intended recipient, you are not authorized to intercept, read, print, retain, copy, forward, or disseminate this message. If you have erroneously received this communication, please notify the sender immediately by phone (704-758-1000) or by e-mail and destroy all copies of this message (electronic, paper, or otherwise). Thank you. Look in the OSA/SF manuals. IOAx282E OSAD device does not exist for CHPID cc Explanation: The OSAD device with unit address X'FE' associated with the specified CHPID (cc) has not been defined. User Response: Perform the following checks and steps: o Check the I/O definitions in the IODF/IOCDS to ensure an OSAD device (X'FE') has been defined for this CHPID. o Update and activate the IODF if necessary o Display the CHPID and unit status information for CHPID cc o Verify the OSAD device is ONLINE o Then restart operations on CHPID cc -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Alvaro Quintupray B. Sent: Tuesday, December 19, 2006 3:24 PM To: IBM-MAIN@BAMA.UA.EDU Subject: IOAK282E OSAD Device does not exist for CHPID xx Hi. Somebody knows about this ..? IOAK282E OSAD device does not exist for CHPID 00 IOAK282E OSAD device does not exist for CHPID 01 IOAK282E OSAD device does not exist for CHPID 03 IOAK282E OSAD device does not exist for CHPID 04 IOAK282E OSAD device does not exist for CHPID 05 IOAC146E 16:59:08 No OSA devices were initialized The message does not exist in the manuals .. How I can resolve this problem ..? Thanks. Alvaro. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IOAK282E OSAD Device does not exist for CHPID xx
You must be looking in the wrong manual. The following is from Quickref on a Zos 1.4 system: IOAA282E IOAx282E OSAD device does not exist for CHPID cc Explanation: The OSAD device with unit address X'FE' associated with the specified CHPID (cc) has not been defined. User Response: Perform the following checks and steps: o Check the I/O definitions in the IODF/IOCDS to ensure an OSAD device (X'FE') has been defined for this CHPID. o Update and activate the IODF if necessary o Display the CHPID and unit status information for CHPID cc o Verify the OSAD device is ONLINE o Then restart operations on CHPID cc -Original Message- From: Alvaro Quintupray B. [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 19, 2006 3:24 PM To: IBM-MAIN@BAMA.UA.EDU Subject: IOAK282E OSAD Device does not exist for CHPID xx Hi. Somebody knows about this ..? IOAK282E OSAD device does not exist for CHPID 00 IOAK282E OSAD device does not exist for CHPID 01 IOAK282E OSAD device does not exist for CHPID 03 IOAK282E OSAD device does not exist for CHPID 04 IOAK282E OSAD device does not exist for CHPID 05 IOAC146E 16:59:08 No OSA devices were initialized The message does not exist in the manuals .. How I can resolve this problem ..? Thanks. Alvaro. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
IOAK282E OSAD Device does not exist for CHPID xx
Hi. Somebody knows about this ..? IOAK282E OSAD device does not exist for CHPID 00 IOAK282E OSAD device does not exist for CHPID 01 IOAK282E OSAD device does not exist for CHPID 03 IOAK282E OSAD device does not exist for CHPID 04 IOAK282E OSAD device does not exist for CHPID 05 IOAC146E 16:59:08 No OSA devices were initialized The message does not exist in the manuals .. How I can resolve this problem ..? Thanks. Alvaro. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html