Re: Question on WRITE statements in ACS and Automation
I suspect that this it is possible to trap these messages with System Automation 3.4 which has a new function: Joblog Monitoring - Messages produced by an application and written to the Joblog or a spooled data set but not WTO'ed to syslog can be made available for automation. We use this to monitor the job logs of certain STCs where the messages do not go to the SYSLOG, etc but are only seen in sysout. Previously we had to use the REXX-SDSF API on a timer basis but this has made life a lot easier. Sebastian -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Question on WRITE statements in ACS and Automation
Hi Lizette, Just cleaning up some mails, and I came across this. There is a message revision table in Netview that could be used. I have used it in a temporary way when I issue a command from system automation that only generates ouput in a joblog - in my case the revision table is: UPON ( JOBNAME = 'DFSKERN' ) REVISE(Y AUTOMATE) Then I activate a message table that triggers an exec to write each message it sees from the jobname to a global variable stem (incrementing an index), and asynchronously pick up the output later. Of course in your case, the message table processing could be much simpler, and permanent (I only do the set-up to retrieve the data I have triggered, and undo it afterwards). Best regards, David Tidy IS Technical Management/SAP-Mf Dow Benelux B.V. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Lizette Koehler Sent: 9 July 2013 15:00 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Question on WRITE statements in ACS and Automation I have a friend who is at z/OS V1.13 He asked me an interesting question that I am thinking of opening a Share requirement on. Let me know what you think When you create ACS code you can put WRITE statements into the process for clarification. Is it possible to capture those WRITEs in an automation product, OPS/MVS, AFOPER, Tivoli, and action the message? If a user is creating a dataset and using an invalid DSN, I could put a write statement in the code that says WRITE MYACS001I Invalid DSN for the storage group requested. Then if it went to SYSLOG I could capture it and send an email to the storage team for review. Or if my user was requesting way to much space for a specify storage pool, I could do something similar. So, it would be nice, in my opinion, to be able to create an event notification that an automation tool could capture and then perform some action (i.e. email the storage team) I understand that I can redirect to a different pool and provide other actions within ACS code. But since a lot of logging goes directly to the DFHSM logs or SYSOUT DDs, I have to have someone manually review to identify what is going on. Another example, there is an ARC0019I message that indicates the CELLS are too small for DFHSM. It is only in the SYSOUT DDs. I will be opening a SHARE requirement to be able to redirect these types of messages to SYSLOG so that an automation tool can send a notification to the storage team. The only way I see of doing it is to filter the output of the task to find the ACS code WRITE statements or filter the DFHSM SYSOUT DDs. Any thoughts are welcome. And if you have any other messages or functions in DFHSM that might need redirection, let me know. Thanks Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Question on WRITE statements in ACS and Automation
David, I think the problem with the ACS WRITE statements is, that the output does not travel the route that can be intercepted by your solution. It goes directly to the JES2 Message file of the job. I have been looking too for a way to collect these message and have them emailed to me, but AFAIK, it is not possible. Any change in this would be welcome. Kees. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Tidy, David (D) Sent: 21 October, 2014 16:32 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Question on WRITE statements in ACS and Automation Hi Lizette, Just cleaning up some mails, and I came across this. There is a message revision table in Netview that could be used. I have used it in a temporary way when I issue a command from system automation that only generates ouput in a joblog - in my case the revision table is: UPON ( JOBNAME = 'DFSKERN' ) REVISE(Y AUTOMATE) Then I activate a message table that triggers an exec to write each message it sees from the jobname to a global variable stem (incrementing an index), and asynchronously pick up the output later. Of course in your case, the message table processing could be much simpler, and permanent (I only do the set-up to retrieve the data I have triggered, and undo it afterwards). Best regards, David Tidy IS Technical Management/SAP-Mf Dow Benelux B.V. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Lizette Koehler Sent: 9 July 2013 15:00 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Question on WRITE statements in ACS and Automation I have a friend who is at z/OS V1.13 He asked me an interesting question that I am thinking of opening a Share requirement on. Let me know what you think When you create ACS code you can put WRITE statements into the process for clarification. Is it possible to capture those WRITEs in an automation product, OPS/MVS, AFOPER, Tivoli, and action the message? If a user is creating a dataset and using an invalid DSN, I could put a write statement in the code that says WRITE MYACS001I Invalid DSN for the storage group requested. Then if it went to SYSLOG I could capture it and send an email to the storage team for review. Or if my user was requesting way to much space for a specify storage pool, I could do something similar. So, it would be nice, in my opinion, to be able to create an event notification that an automation tool could capture and then perform some action (i.e. email the storage team) I understand that I can redirect to a different pool and provide other actions within ACS code. But since a lot of logging goes directly to the DFHSM logs or SYSOUT DDs, I have to have someone manually review to identify what is going on. Another example, there is an ARC0019I message that indicates the CELLS are too small for DFHSM. It is only in the SYSOUT DDs. I will be opening a SHARE requirement to be able to redirect these types of messages to SYSLOG so that an automation tool can send a notification to the storage team. The only way I see of doing it is to filter the output of the task to find the ACS code WRITE statements or filter the DFHSM SYSOUT DDs. Any thoughts are welcome. And if you have any other messages or functions in DFHSM that might need redirection, let me know. Thanks Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by error, please notify the sender immediately by return e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees shall not be liable for the incorrect or incomplete transmission of this e-mail or any attachments, nor responsible for any delay in receipt. Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch Airlines) is registered in Amstelveen, The Netherlands, with registered number 33014286
Re: Question on WRITE statements in ACS and Automation
Hi Kees, Sorry - yes you are right. I was thinking that I was rerouting joblog ouptut, but in fact I am just trapping syslog output that is not normally passed to automation. Best regards, David Tidy IS Technical Management/SAP-Mf Dow Benelux B.V. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Vernooij, CP (SPLXM) - KLM Sent: 21 October 2014 16:41 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Question on WRITE statements in ACS and Automation David, I think the problem with the ACS WRITE statements is, that the output does not travel the route that can be intercepted by your solution. It goes directly to the JES2 Message file of the job. I have been looking too for a way to collect these message and have them emailed to me, but AFAIK, it is not possible. Any change in this would be welcome. Kees. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Tidy, David (D) Sent: 21 October, 2014 16:32 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Question on WRITE statements in ACS and Automation Hi Lizette, Just cleaning up some mails, and I came across this. There is a message revision table in Netview that could be used. I have used it in a temporary way when I issue a command from system automation that only generates ouput in a joblog - in my case the revision table is: UPON ( JOBNAME = 'DFSKERN' ) REVISE(Y AUTOMATE) Then I activate a message table that triggers an exec to write each message it sees from the jobname to a global variable stem (incrementing an index), and asynchronously pick up the output later. Of course in your case, the message table processing could be much simpler, and permanent (I only do the set-up to retrieve the data I have triggered, and undo it afterwards). Best regards, David Tidy IS Technical Management/SAP-Mf Dow Benelux B.V. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Lizette Koehler Sent: 9 July 2013 15:00 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Question on WRITE statements in ACS and Automation I have a friend who is at z/OS V1.13 He asked me an interesting question that I am thinking of opening a Share requirement on. Let me know what you think When you create ACS code you can put WRITE statements into the process for clarification. Is it possible to capture those WRITEs in an automation product, OPS/MVS, AFOPER, Tivoli, and action the message? If a user is creating a dataset and using an invalid DSN, I could put a write statement in the code that says WRITE MYACS001I Invalid DSN for the storage group requested. Then if it went to SYSLOG I could capture it and send an email to the storage team for review. Or if my user was requesting way to much space for a specify storage pool, I could do something similar. So, it would be nice, in my opinion, to be able to create an event notification that an automation tool could capture and then perform some action (i.e. email the storage team) I understand that I can redirect to a different pool and provide other actions within ACS code. But since a lot of logging goes directly to the DFHSM logs or SYSOUT DDs, I have to have someone manually review to identify what is going on. Another example, there is an ARC0019I message that indicates the CELLS are too small for DFHSM. It is only in the SYSOUT DDs. I will be opening a SHARE requirement to be able to redirect these types of messages to SYSLOG so that an automation tool can send a notification to the storage team. The only way I see of doing it is to filter the output of the task to find the ACS code WRITE statements or filter the DFHSM SYSOUT DDs. Any thoughts are welcome. And if you have any other messages or functions in DFHSM that might need redirection, let me know. Thanks Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by
Re: Question on WRITE statements in ACS and Automation
I think I would need a WTO process for ACS code rather than a WRITE statement. Or in addition to a write statement. So for those sections of ACS code I might want to have IF DSN = SYS1.** Then Do Write Restricted HLQ HLQ WTO mymsgid Job JOB Tried to use DSN EXIT END I will see about crafting a share requirement if you think it might be useful. Or perhaps SNMP or MIB or API for other products. But I think that direction maybe a bigger performance hit. I am sure IBM is going to warn against performance issues with something like that. So I would think a warning in using WTO might be appropriate. Lizette -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Vernooij, CP (SPLXM) - KLM Sent: Tuesday, October 21, 2014 7:41 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Question on WRITE statements in ACS and Automation David, I think the problem with the ACS WRITE statements is, that the output does not travel the route that can be intercepted by your solution. It goes directly to the JES2 Message file of the job. I have been looking too for a way to collect these message and have them emailed to me, but AFAIK, it is not possible. Any change in this would be welcome. Kees. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Tidy, David (D) Sent: 21 October, 2014 16:32 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Question on WRITE statements in ACS and Automation Hi Lizette, Just cleaning up some mails, and I came across this. There is a message revision table in Netview that could be used. I have used it in a temporary way when I issue a command from system automation that only generates ouput in a joblog - in my case the revision table is: UPON ( JOBNAME = 'DFSKERN' ) REVISE(Y AUTOMATE) Then I activate a message table that triggers an exec to write each message it sees from the jobname to a global variable stem (incrementing an index), and asynchronously pick up the output later. Of course in your case, the message table processing could be much simpler, and permanent (I only do the set-up to retrieve the data I have triggered, and undo it afterwards). Best regards, David Tidy IS Technical Management/SAP-Mf Dow Benelux B.V. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Lizette Koehler Sent: 9 July 2013 15:00 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Question on WRITE statements in ACS and Automation I have a friend who is at z/OS V1.13 He asked me an interesting question that I am thinking of opening a Share requirement on. Let me know what you think When you create ACS code you can put WRITE statements into the process for clarification. Is it possible to capture those WRITEs in an automation product, OPS/MVS, AFOPER, Tivoli, and action the message? If a user is creating a dataset and using an invalid DSN, I could put a write statement in the code that says WRITE MYACS001I Invalid DSN for the storage group requested. Then if it went to SYSLOG I could capture it and send an email to the storage team for review. Or if my user was requesting way to much space for a specify storage pool, I could do something similar. So, it would be nice, in my opinion, to be able to create an event notification that an automation tool could capture and then perform some action (i.e. email the storage team) I understand that I can redirect to a different pool and provide other actions within ACS code. But since a lot of logging goes directly to the DFHSM logs or SYSOUT DDs, I have to have someone manually review to identify what is going on. Another example, there is an ARC0019I message that indicates the CELLS are too small for DFHSM. It is only in the SYSOUT DDs. I will be opening a SHARE requirement to be able to redirect these types of messages to SYSLOG so that an automation tool can send a notification to the storage team. The only way I see of doing it is to filter the output of the task to find the ACS code WRITE statements or filter the DFHSM SYSOUT DDs. Any thoughts are welcome. And if you have any other messages or functions in DFHSM that might need redirection, let me know. Thanks Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Question on WRITE statements in ACS and Automation
Darth Keller wrote: Well, this gets more interesting as it appears that there must be some automation in place as I'm only seeing the IGD010*I (* = 07, 08, 09, 10) on 2 of my 4 production LPAR's. More reasons for a SHARE requirement! Are you sure your messages are not being suppressed? I am sure they are not suppressed after looking in all my MPFLSTxx and my automation suppression lists. I still think the SHARE requirement would be valid as I want to see ALL the messages in the log - batch, TSO, etc. Agreed! But take in account that different macros are using to place a message on batch (WTO), TSO (TPUT), etc. Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Question on WRITE statements in ACS and Automation
I have a friend who is at z/OS V1.13 He asked me an interesting question that I am thinking of opening a Share requirement on. Let me know what you think When you create ACS code you can put WRITE statements into the process for clarification. Is it possible to capture those WRITEs in an automation product, OPS/MVS, AFOPER, Tivoli, and action the message? If a user is creating a dataset and using an invalid DSN, I could put a write statement in the code that says WRITE MYACS001I Invalid DSN for the storage group requested. Then if it went to SYSLOG I could capture it and send an email to the storage team for review. Or if my user was requesting way to much space for a specify storage pool, I could do something similar. So, it would be nice, in my opinion, to be able to create an event notification that an automation tool could capture and then perform some action (i.e. email the storage team) I understand that I can redirect to a different pool and provide other actions within ACS code. But since a lot of logging goes directly to the DFHSM logs or SYSOUT DDs, I have to have someone manually review to identify what is going on. Another example, there is an ARC0019I message that indicates the CELLS are too small for DFHSM. It is only in the SYSOUT DDs. I will be opening a SHARE requirement to be able to redirect these types of messages to SYSLOG so that an automation tool can send a notification to the storage team. The only way I see of doing it is to filter the output of the task to find the ACS code WRITE statements or filter the DFHSM SYSOUT DDs. Any thoughts are welcome. And if you have any other messages or functions in DFHSM that might need redirection, let me know. Thanks Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Question on WRITE statements in ACS and Automation
I do see some of my SMS Write output in my syslog: IGD01007I IGD01008I IGD01010I But it appears that these are all from batch jobs. I tested allocating a ds from my TSO session the WRITEs came back to me but are not in the log. ddk This e-mail message and all attachments transmitted with it may contain legally privileged and/or confidential information intended solely for the use of the addressee(s). If the reader of this message is not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, forwarding or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message and all copies and backups thereof. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Question on WRITE statements in ACS and Automation
Lizette Koehler wrote: When you create ACS code you can put WRITE statements into the process for clarification. Is it possible to capture those WRITEs in an automation product, OPS/MVS, AFOPER, Tivoli, and action the message? AFAIK, those WRITES are NOT written to SYSLOG. I have now tested it. :-( (Of course, I could be wrong as usual. ;-D ) I remember those ancient days when we were trying to learn users to use SMS properly. Those writes (if on SYSLOG) could really make our work less painfull. If a user is creating a dataset and using an invalid DSN, I could put a write statement in the code that says WRITE MYACS001I Invalid DSN for the storage group requested. Then if it went to SYSLOG I could capture it and send an email to the storage team for review. Good. Excellent way to punish them. ;-D So, it would be nice, in my opinion, to be able to create an event notification that an automation tool could capture and then perform some action (i.e. email the storage team) It should be more than nice. I think you should go ahead and get a SHARE requirement. Groete / Greetings Elardus Engelbrecht Phrase of the week: Remember now, the first 5 days after a weekend are always hard! -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Question on WRITE statements in ACS and Automation
If people want these WRITE messages going to SYSLOG and put in a SHARE request for that functionality, __PLEASE__ ask that it be optional. I get enough crap messages on my z/OS SYSLOG as it is. To the point that I write them to a data set which I then send to my Linux desktop simply so that I can process them and strip out the messages which are useless just so that I can browse something reasonable. On Tue, Jul 9, 2013 at 8:25 AM, Elardus Engelbrecht elardus.engelbre...@sita.co.za wrote: Lizette Koehler wrote: When you create ACS code you can put WRITE statements into the process for clarification. Is it possible to capture those WRITEs in an automation product, OPS/MVS, AFOPER, Tivoli, and action the message? AFAIK, those WRITES are NOT written to SYSLOG. I have now tested it. :-( (Of course, I could be wrong as usual. ;-D ) I remember those ancient days when we were trying to learn users to use SMS properly. Those writes (if on SYSLOG) could really make our work less painfull. If a user is creating a dataset and using an invalid DSN, I could put a write statement in the code that says WRITE MYACS001I Invalid DSN for the storage group requested. Then if it went to SYSLOG I could capture it and send an email to the storage team for review. Good. Excellent way to punish them. ;-D So, it would be nice, in my opinion, to be able to create an event notification that an automation tool could capture and then perform some action (i.e. email the storage team) It should be more than nice. I think you should go ahead and get a SHARE requirement. Groete / Greetings Elardus Engelbrecht Phrase of the week: Remember now, the first 5 days after a weekend are always hard! -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- This is a test of the Emergency Broadcast System. If this had been an actual emergency, do you really think we'd stick around to tell you? Maranatha! John McKown -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Question on WRITE statements in ACS and Automation
Darth Keller wrote: I do see some of my SMS Write output in my syslog: IGD01007I What magic trick did you do? Mine (from DATACLAS) in my batch job does NOT appears in the SYSLOG! Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Question on WRITE statements in ACS and Automation
Well, this gets more interesting as it appears that there must be some automation in place as I'm only seeing the IGD010*I (* = 07, 08, 09, 10) on 2 of my 4 production LPAR's. Are you sure your messages are not being suppressed? I still think the SHARE requirement would be valid as I want to see ALL the messages in the log - batch, TSO, etc. ddk Darth Keller wrote: I do see some of my SMS Write output in my syslog: IGD01007I What magic trick did you do? Mine (from DATACLAS) in my batch job does NOT appears in the SYSLOG! Groete / Greetings Elardus Engelbrecht This e-mail message and all attachments transmitted with it may contain legally privileged and/or confidential information intended solely for the use of the addressee(s). If the reader of this message is not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, forwarding or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message and all copies and backups thereof. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Question on WRITE statements in ACS and Automation
John McKown, In any of my Share requirements, I always ask for a parm addition. Let the current behavior be as it is, and for those that want the new function, supply a new parm. I understand completely about not wanting more entries in syslog or other places. Lizette -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John McKown Sent: Tuesday, July 09, 2013 6:31 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Question on WRITE statements in ACS and Automation If people want these WRITE messages going to SYSLOG and put in a SHARE request for that functionality, __PLEASE__ ask that it be optional. I get enough crap messages on my z/OS SYSLOG as it is. To the point that I write them to a data set which I then send to my Linux desktop simply so that I can process them and strip out the messages which are useless just so that I can browse something reasonable. On Tue, Jul 9, 2013 at 8:25 AM, Elardus Engelbrecht elardus.engelbre...@sita.co.za wrote: Lizette Koehler wrote: When you create ACS code you can put WRITE statements into the process for clarification. Is it possible to capture those WRITEs in an automation product, OPS/MVS, AFOPER, Tivoli, and action the message? AFAIK, those WRITES are NOT written to SYSLOG. I have now tested it. :-( (Of course, I could be wrong as usual. ;-D ) I remember those ancient days when we were trying to learn users to use SMS properly. Those writes (if on SYSLOG) could really make our work less painfull. If a user is creating a dataset and using an invalid DSN, I could put a write statement in the code that says WRITE MYACS001I Invalid DSN for the storage group requested. Then if it went to SYSLOG I could capture it and send an email to the storage team for review. Good. Excellent way to punish them. ;-D So, it would be nice, in my opinion, to be able to create an event notification that an automation tool could capture and then perform some action (i.e. email the storage team) It should be more than nice. I think you should go ahead and get a SHARE requirement. Groete / Greetings Elardus Engelbrecht Phrase of the week: Remember now, the first 5 days after a weekend are always hard! -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- This is a test of the Emergency Broadcast System. If this had been an actual emergency, do you really think we'd stick around to tell you? Maranatha! John McKown -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Question on WRITE statements in ACS and Automation
I've done some more testing and it doesn't look like I'm seeing messages from all my batch jobs either. It looks more like dynamic allocations some temporary datasets - which might also be dynamically allocated. ddk From: Darth Keller/WBY/ASSURANT/US To: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Date: 07/09/2013 08:53 AM Subject:Re: Question on WRITE statements in ACS and Automation Well, this gets more interesting as it appears that there must be some automation in place as I'm only seeing the IGD010*I (* = 07, 08, 09, 10) on 2 of my 4 production LPAR's. Are you sure your messages are not being suppressed? I still think the SHARE requirement would be valid as I want to see ALL the messages in the log - batch, TSO, etc. ddk Darth Keller wrote: I do see some of my SMS Write output in my syslog: IGD01007I What magic trick did you do? Mine (from DATACLAS) in my batch job does NOT appears in the SYSLOG! Groete / Greetings Elardus Engelbrecht This e-mail message and all attachments transmitted with it may contain legally privileged and/or confidential information intended solely for the use of the addressee(s). If the reader of this message is not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, forwarding or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message and all copies and backups thereof. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN