Re: JES to RSCS LPR printer
You will have to send it to an OUTCLASS in JES that is not defined with OUTDISP=(HOLD...), or release the output in the JES queue prior to sending it to RSCS. Check with your JES folks for a class that has OUTDISP=(WRITE,...). From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Mark Pace Sent: Friday, January 15, 2010 8:34 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: JES to RSCS LPR printer Thanks everyone, I found the problem I was having. Actually fairly dumb on my part. I changed the DEST to bpzvm.xwc132, and it didn't print. I assumed it didn't work. But what I found is that it was in the RSCS queue with a user-hold. When I released the hold it printed. Now I need to find if there is a VSE DISP= type parameter in z/OS so that it won't go to RSCS with a user-hold. On Thu, Jan 14, 2010 at 1:59 PM, Marcy Cortes mailto:marcy.d.cor...@wellsfargo.com>> wrote: We do that. I'm not a z/OS person, but I think they just use DEST=vmnode.printer Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU<mailto:IBMVM@LISTSERV.UARK.EDU>] On Behalf Of Mark Pace Sent: Thursday, January 14, 2010 10:19 AM To: IBMVM@LISTSERV.UARK.EDU<mailto:IBMVM@LISTSERV.UARK.EDU> Subject: [IBMVM] JES to RSCS LPR printer Is it possible to route JES output to an LPR printer defined to RSCS? The LPR printer works great in RSCS, but can't for the life of me make it work with IP Printway in z/OS. I already have RSCS and JES connected, I currently use it to send output to my VM userid, and then print it from my VM userid to the RSCS printer. I would just like to remove the step of logging in to VM and printing. Thanks for any assistance. -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317
Re: JES to RSCS LPR printer
I have had that problem at other places and until the MVS people fixed their side I used my "SCHEDULER" product to change RSCS prt queues to NOHOLD every 30 minutes so anything hung up would print, eventually. good luck munson Mark Pace Sent by: The IBM z/VM Operating System 01/15/2010 08:33 AM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: JES to RSCS LPR printer Thanks everyone, I found the problem I was having. Actually fairly dumb on my part. I changed the DEST to bpzvm.xwc132, and it didn't print. I assumed it didn't work. But what I found is that it was in the RSCS queue with a user-hold. When I released the hold it printed. Now I need to find if there is a VSE DISP= type parameter in z/OS so that it won't go to RSCS with a user-hold. On Thu, Jan 14, 2010 at 1:59 PM, Marcy Cortes < marcy.d.cor...@wellsfargo.com> wrote: We do that. I'm not a z/OS person, but I think they just use DEST=vmnode.printer Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Mark Pace Sent: Thursday, January 14, 2010 10:19 AM To: IBMVM@LISTSERV.UARK.EDU Subject: [IBMVM] JES to RSCS LPR printer Is it possible to route JES output to an LPR printer defined to RSCS? The LPR printer works great in RSCS, but can't for the life of me make it work with IP Printway in z/OS. I already have RSCS and JES connected, I currently use it to send output to my VM userid, and then print it from my VM userid to the RSCS printer. I would just like to remove the step of logging in to VM and printing. Thanks for any assistance. -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 *** IMPORTANT NOTE*-- The opinions expressed in this message and/or any attachments are those of the author and not necessarily those of Brown Brothers Harriman & Co., its subsidiaries and affiliates ("BBH"). There is no guarantee that this message is either private or confidential, and it may have been altered by unauthorized sources without your or our knowledge. Nothing in the message is capable or intended to create any legally binding obligations on either party and it is not intended to provide legal advice. BBH accepts no responsibility for loss or damage from its use, including damage from virus.
Re: JES to RSCS LPR printer
Thanks everyone, I found the problem I was having. Actually fairly dumb on my part. I changed the DEST to bpzvm.xwc132, and it didn't print. I assumed it didn't work. But what I found is that it was in the RSCS queue with a user-hold. When I released the hold it printed. Now I need to find if there is a VSE DISP= type parameter in z/OS so that it won't go to RSCS with a user-hold. On Thu, Jan 14, 2010 at 1:59 PM, Marcy Cortes wrote: > We do that. > I'm not a z/OS person, but I think they just use DEST=vmnode.printer > > > Marcy > > "This message may contain confidential and/or privileged information. If > you are not the addressee or authorized to receive this for the addressee, > you must not use, copy, disclose, or take any action based on this message > or any information herein. If you have received this message in error, > please advise the sender immediately by reply e-mail and delete this > message. Thank you for your cooperation." > > > > > > From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On > Behalf Of Mark Pace > Sent: Thursday, January 14, 2010 10:19 AM > To: IBMVM@LISTSERV.UARK.EDU > Subject: [IBMVM] JES to RSCS LPR printer > > > Is it possible to route JES output to an LPR printer defined to RSCS? The > LPR printer works great in RSCS, but can't for the life of me make it work > with IP Printway in z/OS. I already have RSCS and JES connected, I > currently use it to send output to my VM userid, and then print it from my > VM userid to the RSCS printer. I would just like to remove the step of > logging in to VM and printing. > > Thanks for any assistance. > > -- > Mark Pace > Mainline Information Systems > 1700 Summit Lake Drive > Tallahassee, FL. 32317 > -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317
Re: JES to RSCS LPR printer
We do that. I'm not a z/OS person, but I think they just use DEST=vmnode.printer Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Mark Pace Sent: Thursday, January 14, 2010 10:19 AM To: IBMVM@LISTSERV.UARK.EDU Subject: [IBMVM] JES to RSCS LPR printer Is it possible to route JES output to an LPR printer defined to RSCS? The LPR printer works great in RSCS, but can't for the life of me make it work with IP Printway in z/OS. I already have RSCS and JES connected, I currently use it to send output to my VM userid, and then print it from my VM userid to the RSCS printer. I would just like to remove the step of logging in to VM and printing. Thanks for any assistance. -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317
Re: JES to RSCS LPR printer
Mark, We do it all the time. Just define a DESTID in JES and route to the node name of the RSCS queue for the LPR. Works great. From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Mark Pace Sent: Thursday, January 14, 2010 1:19 PM To: IBMVM@LISTSERV.UARK.EDU Subject: JES to RSCS LPR printer Is it possible to route JES output to an LPR printer defined to RSCS? The LPR printer works great in RSCS, but can't for the life of me make it work with IP Printway in z/OS. I already have RSCS and JES connected, I currently use it to send output to my VM userid, and then print it from my VM userid to the RSCS printer. I would just like to remove the step of logging in to VM and printing. Thanks for any assistance. -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317
Re: JES to RSCS LPR printer
For some VSE output, we send from POWER to a service virtual machine that uses the form number as printer number, receives it, does some manipulation then sends it off to the printer. But for those that don't require 'adjustment' we send directly to the RSCS printer. -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Mark Pace Sent: January 14, 2010 13:19 To: IBMVM@LISTSERV.UARK.EDU Subject: JES to RSCS LPR printer Is it possible to route JES output to an LPR printer defined to RSCS? The LPR printer works great in RSCS, but can't for the life of me make it work with IP Printway in z/OS. I already have RSCS and JES connected, I currently use it to send output to my VM userid, and then print it from my VM userid to the RSCS printer. I would just like to remove the step of logging in to VM and printing. Thanks for any assistance. -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review retransmission dissemination or other use of or taking any action in reliance upon this information by persons or entities other than the intended recipient or delegate is strictly prohibited. If you received this in error please contact the sender and delete the material from any computer. The integrity and security of this message cannot be guaranteed on the Internet. The sender accepts no liability for the content of this e-mail or for the consequences of any actions taken on the basis of information provided. The recipient should check this e-mail and any attachments for the presence of viruses. The sender accepts no liability for any damage caused by any virus transmitted by this e-mail. This disclaimer is property of the TTC and must not be altered or circumvented in any manner.
JES to RSCS LPR printer
Is it possible to route JES output to an LPR printer defined to RSCS? The LPR printer works great in RSCS, but can't for the life of me make it work with IP Printway in z/OS. I already have RSCS and JES connected, I currently use it to send output to my VM userid, and then print it from my VM userid to the RSCS printer. I would just like to remove the step of logging in to VM and printing. Thanks for any assistance. -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317