Re: [mythtv-users] 0.17 DVB-T Mythtvsetup hangs
On Sun, 13 Feb 2005 16:11:04 -, Mike Choy <[EMAIL PROTECTED]> wrote: > Lukas > > How do I see this when Mythtvsetup is in fullscreen? > > Mike Choy > ALT-Tab in Gnome.(a la Windows) ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] 0.17 and DVB woes unable to complete scan
On Sun, 13 Feb 2005 10:34:24 -, mail.com <[EMAIL PROTECTED]> wrote: > Alex > > I'm having problems with mythtv setup just after the input connections page > when I come out of this it locks up with a 50% bar on the screen. > > Can you post the steps you went through to get your UK DVB -T under 0.17 > working. > > Mike Choy > Mike, When this happens, check the window you're running the frontend from, you might find that it''s sitting there asking you to confirm something about the uk_rt listings grabber! I get this whenever I go into input connections, I just flip to the command window, press enter and off you go again. Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] 0.17 and DVB woes unable to complete scan
On Sat, 12 Feb 2005 23:11:40 +, Alex Hazlewoood <[EMAIL PROTECTED]> wrote: > After upgrading to 0.17 fro 0.16 I am unable to get my channels back :-( > > The auto scan does not complete and gets to 39% and then cycles through > the unlock signal / lock status but does not progress any further.. > Plus the channels that it is picking up are from another transmitter in > my area[craigkelly] The aerial is not putting towards this so 90% of the > picture is broken up > > I am not sure if I understand this new DVB scan app, what should I be > entering to generate the "full Scan" ? > I entered the Freq of one of my old channels [0.16 data] 57000 Hz > .. Should I be entering the data from the uk-blackhill.conf file or > should I be leaving it blank? > > I am using the Black Hill transmitter if anyone can help I can keep it > installed otherwise it is downgrade time to 0.16 :-( > > Thanks > > Alex > Enter the frequency you have in channels.conf for BBC1 + all the other parameters! I just tried entering the frequency field for my transmitter (Crystal Palace) and the card wouldn't lock on. Had to specify the other tuning fields also, works fine then! Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] EPG and mythtv 0.17
On Sat, 12 Feb 2005 13:30:44 -0500, Taylor Jacob <[EMAIL PROTECTED]> wrote: > Quoting Jörg Dreßler <[EMAIL PROTECTED]>: > > >> I'm very pleased about the new 0.17, especially the DVB-integration is > > >> really nice. But i dont know how to get the dvb-epg-data into mythtv. > > >> I've checked every "get EPG over DVB" (or what its called in english) > > >> in the channel setup. But i dont know what to do now, as there is > > >> still no programdata in the mythtv-epg. Till now ive used tv_grab_dvb > > >> and a small script, that id to call manually - replacing this would > > >> quite nice. The changelog sais "Works for UK DVB-T, and in North > > >> America.", so perhaps someone knows if it works for german DVB-T > > >> (Berlin). > > For the record: > > The DVB EPG code that shiped with .17 is still Beta. Thats why it doesn't > seem > to work in Germany.. I need to do some work it, so you may want to check the > cvs commits for dvb related files over the next few weeks / months and see > when > we get this fixed to work for you guys over there in Germany.. It wasn't > intentional to make it only work in the countries where the dvb-dev guys are. > :) > Seems to work OK in UK! Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Compiled/installed 0.17
Well this evening went for a 0.16->0.17 upgrade and logged the following "funnies" :- MythWeb access to MythWeather data still broke for my (UK) location - the days of week are incorrect - MSN datasource day1 == Sunday but code assumes day1 == Monday, edited themes/Default/weather.php to correct day of week -> day name mappings and all is well. Something about my existing Db setup caused the DVB EIT program guide update code to try and insert everything against a channel id of 1000 - which failed. Eventually I trashed my existing Db and let 0.17 run against a fresh(empty) Db and all was well. Am now up and running with 0.17 - schweet. Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Anyone with working DVB-S in Australia ?
On Fri, 11 Feb 2005 23:24:00 +1000, David Whyte <[EMAIL PROTECTED]> wrote: > Hey, nice surname :P > > First, I don't think it is legal is it? > Only if you don't actually "pay" for the Pay TV. The original poster didn't mention cracking anything did he ? Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Hauppauge Silver Remote and Nova-T [solved]
On Wed, 9 Feb 2005 20:15:05 +, Robin Elvin <[EMAIL PROTECTED]> wrote: > On Wednesday 09 February 2005 19:30, Andy Whitworth wrote: > > > > > > I've already tried that and it didn't work. Maybe I did something wrong. > The > > > remote model (found on a sticker in the battery compartment) is A415-HPG - > is > > > that the same as yours? > > > > > > -- > > > Rob > > > ___ > > > mythtv-users mailing list > > > mythtv-users@mythtv.org > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > Yup, that's the same one! > > > > Have you tried irrecord after making the driver mods and see if it > > picks up activity on /dev/input/event2 (in my case) ? > > > > I have just got it working!! > > I tried 2 video4linux snapshots but they wouldn't compile. I think that's what > made me think I had tried it already with an older snapshot which worked - it > was getting all a bit confusing! > > Anyway, I copied the cx88-input.c over the one in the kernel source tree and > recompiled. Then I copied the lircd.conf, started lircd (as it says). > > The problem was with this line: > > copy the lircd file to ~/.mythtv/lircd > > I had been running mythfrontend on login - when I ran from a bash shell I got > "could not open /home/mythtv/.mythtv/lircrc" in the output. The doc says the > wrong filename. Renamed the file to lircrc and bingo! > > Thanks for your quick responses. I got there and I'm happy :-D > > -- > Rob > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > Ah, yes - I remember that typo now! Well done on getting it working. Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Hauppauge Silver Remote and Nova-T
> > I've already tried that and it didn't work. Maybe I did something wrong. The > remote model (found on a sticker in the battery compartment) is A415-HPG - is > that the same as yours? > > -- > Rob > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > Yup, that's the same one! Have you tried irrecord after making the driver mods and see if it picks up activity on /dev/input/event2 (in my case) ? ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Hauppauge Silver Remote and Nova-T
On Tue, 8 Feb 2005 22:10:16 +, Robin Elvin <[EMAIL PROTECTED]> wrote: > Hi, > > Anybody got the silver remote with a Nova-T to work? I've had a look at the > v4l drivers and there seems to be no reference in the source code. The > keyboard events generated are mostly garbage probably due to the fact they > are for a grey remote (Took me a while to realise my remote is a different > colour!). > > So unless anyone has a rewritten driver I will have to move my coding skills > into uncharted territory ;-) > > -- > Rob > If it's the same one as included with the "new" Nova-T then yes, I've got it working. I'm currently using lircd to handle the remote although I may look at getting Myth to work without lircd later. I patched the cx88-input.c file and setup lircd as described here:- http://spamtastic.demon.co.uk/v4l/Readme.txt Andy. Fedora Core 3, 2.6.10 kernel, Myth 0.16 Hauppauge Nova-T DVB-T Card Generic CX88 DVB-T Card ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Cable Modem == Free Basic Cable.
On Tue, 8 Feb 2005 04:50:32 -0500, Maverick <[EMAIL PROTECTED]> wrote: > I'm sure you all are aware of that only paying for cable modem service > and watching the basic channels that aren't filtered is illegal. > Comcast regularly audits their systems. In fact, they installed the > 'audit device' and then quickly filtered my connection some years ago > when I lived in their territory. I even spoke to the appt. maintenance > guy who I had "fix" my cable, and he said they where all about > cracking down on it. I assume it's not worth their time to prosecute > people for it, but they do watch for it and stop it... at least > Comcast. > > Who knows now, I live in an Adelphia area now. :) > > Most cable companies charge more for cable modem only service, ie, no > TV. It would seam to me they charge the extra to cover the costs > involved in auditing and/or filtering devices, or, maybe just because > they assume you're going to steal the channels anyway. > > Hey, perhaps that NYT article wasn't actually too far wide of the mark. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] wap browsing to webmyth
On Fri, 04 Feb 2005 21:05:42 +, Andy Swain <[EMAIL PROTECTED]> wrote: > hi, > > I have been tinkering with a wap interface to mythtv and I see there is > a wap theme for webmyth, It looks like webmyth detects a wap browser and > switches to the wap theme but it still seems to generate html and not wml. > > I have messed about with some simple but now quite old pages curtesy of > http://mythtv.org/pipermail/mythtv-dev/2003-June/010360.html > thanks bjorn, and I can now just about record a program from my mobile > which is not only cool but occasionally useful! > > I am not an expert but I will happily try to persuade the wap theme to > work as well but am I missing something here? The wap thee seems to be a > small footprint html interface which is great but it's not wml and it > doesn't work on my phone. Should I be trying to "finish" the wap theme > to do wml instead of html or will that break other applications of the > theme that I don't know about? should I be writing another theme again? > or has all this already been done and I just can't find it? is anyone > using a wap interface from a phone already? > > I am grateful for any feedback if I am about to waste my time > cheers > > Andy Swain > > Hi Andy, I've got a Siemens S45 phone and it's happy with the HTML generated by the Mythweb 'wap' theme. I had to make some PHP code mods to get the program recording capability working but everything else worked out of the box. Guess I'm just lucky with my phone being flexible regarding what it will accept during a 'wap' session as I tried to use online WAP emulators to test the Mythweb wap i/f but none of them would play ball with the pseudo-wap pages generated. Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Thank You
On Fri, 4 Feb 2005 08:19:14 -0500, Colin Smillie <[EMAIL PROTECTED]> wrote: > Allan, I think you should read the link below, its not the NYT Article... > > http://advancedmediacommittee.typepad.com/emmyadvancedmedia/2005/01/mythtv_a_nonmyt.html > > > > > Thank you?!?!? Why, do you like being called a thief? > > > > Cheers, > > > > Allan. Personally I read the second article as being supportive of homebrew PVR'ers - did you actually read it ? ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Internal IR Receiver
On Fri, 4 Feb 2005 09:42:28 -, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > RS components are trade only (although I could probably get round that), > but again I suspect they have a stupid minimum order amount. > RS www sales aren't trade only, just their in-person collection counters are. I've ordered loads of stuff from them over the web. No minimum order size I believe although the postal rates are more attractive if you can put together a 'larger' order:- Non-account holders Normal - next day delivery - Post & Packing charge Order value £0-£29.99 £4.95 (+VAT) Order value £30-£79.99 £2.95 (+VAT) Order value £80+£1.75 (+VAT) Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] MythTV with SELinux (esp. MythWeb)
Thanks, I'll give that a shot. At the time the idea of reading through SELinux documentation didn't seem too appealing to get over 'just another hurdle' so I went for the scattergun approach :-) Andy. On Mon, 31 Jan 2005 22:10:18 -0500, Harry Orenstein <[EMAIL PROTECTED]> wrote: > On Monday 31 January 2005 11:11 am, Andy Whitworth wrote: > > I'm using FC3 with SELinux enabled except for the httpd > > server which I had to disable SELinux security for in order > > to get Mythweb talking to MySQL successfully. > > > > I got around that by adding this: > > /video(/.*)?system_u:object_r:httpd_user_content_t > > to the end of: > > /etc/selinux/targeted/contexts/files/file_contexts > > Fixing that and commenting out the line for ntpdate were the only changes I > needed to make to allow SELinux to run on my system. I was (and am) just > curious to see what others are doing. > > -- Harry O. > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] MythTV with SELinux (esp. MythWeb)
I'm using FC3 with SELinux enabled except for the httpd server which I had to disable SELinux security for in order to get Mythweb talking to MySQL successfully. On Sun, 30 Jan 2005 20:35:42 -0800 (PST), Joe Votour <[EMAIL PROTECTED]> wrote: > It probably doesn't help you out too much now, but > Jarod's FC3 document mentions that there will be > problems with enabling SELinux. > > I'm using FC3 with SELinux disabled, and the only > problem that I'm having (currently, I went through an > issue with my intel8x0 not working, so I replaced it > with a SoundBlaster Live) is that mythfrontend won't > run SUID (apparently a known issue with newer > kernels). > > -- Joe > > --- Harry Orenstein <[EMAIL PROTECTED]> wrote: > > > Is there anyone out there with SELinux enabled on > > their Myth system? I am > > running a combined frontend/backend on FC3 with > > SELinux enabled (for no > > particular reason) using the targeted policy and had > > alot of problems getting > > MythWeb to work. I also have had problems after > > upgrades on some packages. > > I'm really just interested if anyone leaves SELinux > > enabled or if people just > > punt and turn it off. > > > > TIA! > > > > > > -- Harry O. > > > ___ > > mythtv-users mailing list > > mythtv-users@mythtv.org > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > __ > Do you Yahoo!? > Yahoo! Mail - Helps protect you from nasty viruses. > http://promotions.yahoo.com/new_mail > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Transcoding settings for DVB source
Hi, I've just edited commercials out of a DVB sourced program and the resultant transcoded file size was about 3x the original!! So I looked at my transcoding settings and changed the target coded to MPEG4 from RTjpeg. This results in smaller file sizes i.e. less than the original rather than more :-) BUT, the transcoded program seems to have "forgotten" that it's a widescreen program and starts playing in 4:3 format. If I change the ratio to 16:9 manually then it looks fine *but* I have to manually switch aspect ratio whereas the pre-transcoded original would automatically detect and switch to 16:9. Is there anything I can do to set transcoding to preserve the automatic widescreen detection ? Cheers, Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
mythtv-users@mythtv.org
Dan, I found that I needed to add the following lines to the bottom of my /etc/udev/permissions.d/50-udev.permissions file:- # DVB dvb/*:root:root:0666 dvb:root:root:0666 dvb/adapter*:root:root:0666 dvb/adapter*/*:root:root:0666 I've also got the following in my /etc/udev/rules.d/50-udev.rules file:- KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c" which references /etc/udev/scripts/dvb.sh containing:- #!/bin/sh /bin/echo $1 | /bin/sed -e 's,dvb\([0-9]\)\.\([^0-9]*\)\([0-9]\),dvb/adapter\1/\2\3,' Hope this helps, Andy. On Thu, 27 Jan 2005 12:02:55 +, Dan Robinson <[EMAIL PROTECTED]> wrote: > > Scratch my response, I've found them inside the video4linux group, I > hadn't realised there were packages for specific chipsets. > > Thanks again, I'll try this later today. > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] MythWeb WAP interface broken
Hi, After installing MythWeb and getting it working with a conventional browser I thought I'd try accessing it with my phone WAP browser. The channel list and program guide pages work fine but the program detail page which allows you to record a program doesn't work i.e. I can't schedule a recording. Looking under the covers at the PHP code shows incompatibility between the controlling program_detail.php module and the WAP specific program_detail.php file. For example, the WAP program_detail.php creates a HTML form and specifies that the form should use the "get" method of submitting the form details whereas the controlling program_detail.php code which is then invoked looks for passed parameters using the $_POST[''] method. Unsurprisingly the controlling invoked code can't find the passed parameters and doesn't invoke its "schedule new recording" code. I've had a look in CVS and can't see any patches to rectify this. Does anyone have the WAP i/f fully operational or is WAP support/development a dead duck these days ;-) ? I'm willing to put in the legwork to get it working and submit a patch if I'm correct in my understanding of it being broken. Cheers, Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
mythtv-users@mythtv.org
I used the stock 2.6.10 kernel patched with the video4linux DVB driver code. Have you tried running the MAKEDEV.sh script after reboot (can't remember what it's distributed with) ? Basically it uses mknod commands to create the correct dvb/adapter directories/nodes. I used this as an interim step to get the devices created and verify that my card was being recognised. I then worked on getting udev setup correctly so that the script wasn't required. I'd advise a similar approach! Andy. On Thu, 27 Jan 2005 10:14:34 +, Dan Robinson <[EMAIL PROTECTED]> wrote: > On Thu, 27 Jan 2005 01:09:58 +, Christopher McEwan > <[EMAIL PROTECTED]> wrote: > > On Thu, 27 Jan 2005 01:08:36 +, Christopher McEwan > > <[EMAIL PROTECTED]> wrote: > > > On Wed, 26 Jan 2005 19:09:24 +, Dan Robinson > > > <[EMAIL PROTECTED]> wrote: > > > > On Wed, 26 Jan 2005 16:11:20 +, Christopher McEwan > > > > <[EMAIL PROTECTED]> wrote: > > > > > On Wed, 26 Jan 2005 12:06:52 +, Andy Whitworth <[EMAIL > > > > > PROTECTED]> wrote: > > > > > > I've got the devices being created automatically under FC3 2.6.10 > > > > > > but > > > > > > I had to do a bit of udev hacking around, specifically the > > > > > > permissions > > > > > > settings, to get it working. Can't remember the exact details at > > > > > > the > > > > > > moment, will check and post when I get home. > > > > > > > > > > > > Andy. > > > > > > > > > > > > On Wed, 26 Jan 2005 11:32:15 +, Paul Woodward > > > > > > <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > > > > > > > The only 'hack' solution I found was to create the dvb devices in > > > > > > > my startup > > > > > > > scripts. Not very elegant, but it worked fine... > > > > > > > > > > > > > > Paul > > > > > > > > > > > > > > > > > > > > > >-Original Message- > > > > > > > >From: Dan Robinson [mailto:[EMAIL PROTECTED] > > > > > > > >Sent: Wednesday, January 26, 2005 10:23 AM > > > > > > > >To: 'Discussion about mythtv' > > > > > > > >Subject: [mythtv-users] Nova-T's & > > > > > > > > > > > > > > > >I'm having problems getting my dvb devices to show up in FC3 > > > > > > > >(2.6.10-1.741_FC3) under udev. As per a recent mail from Axel, > > > > > > > >I've > > > > > > > >installed the video4linux packages to give me the drivers > > > > > > > >required for > > > > > > > >my 2 Nota-T cards (1 Conexant and one the older saa7146). > > > > > > > >However, I > > > > > > > >only get the following device after reboot, and mythtvsetup > > > > > > > >doesn't > > > > > > > >recognice any of my dvb cards. > > > > > > > > > > > > > > > >Can anyone help. Hopefully I've provided everything needed to > > > > > > > >assist. > > > > > > > > The data below was gathered immediately after reboot, I didn't > > > > > > > > do > > > > > > > >anything extra to load modules etc. > > > > > > > > > > > > > > > >Dan > > > > > > > > > > > > > > > >[EMAIL PROTECTED] ~]# ll /dev/dvb* > > > > > > > >crw--- 1 root root 212, 7 Jan 26 09:11 /dev/dvb > > > > > > > > > > > > > > > >[EMAIL PROTECTED] ~]# rpm -qa | grep video4 > > > > > > > >video4linux-kmdl-2.6.10-1.741_FC3-20050113_172233-54.1.rhfc3.at > > > > > > > >video4linux-20050113_172233-54.1.rhfc3.at > > > > > > > > > > > > > > > >Using the udev instructions from > > > > > > > > > > > > > > > >http://www.helkit.com/cgi-bin/twiki/bin/view/Main/MythTVDVB-TAndConexantNotes > > > > > > > > > > > > > > > >Added the following to /etc/udev/50-udev.rules commenting ou
Fwd: [mythtv-users] mythweb Recorded Programs Warning sorting.php line 42
Doh! Typed my modification line in at work rather than cutting and pasting from my "real" patch. Missed out a ")" at the end of the if expression. s/b // MY MOD START if (!isset ( $_SESSION[$session] )) return false; // MY MOD END Andy. -- Forwarded message -- From: Andy Whitworth <[EMAIL PROTECTED]> Date: Wed, 26 Jan 2005 12:32:18 + Subject: Re: [mythtv-users] mythweb Recorded Programs Warning sorting.php line 42 To: Andrew Cheung <[EMAIL PROTECTED]>, Discussion about mythtv I put in an if statement to only perform the foreach statement if the $_SESSION[] variable was set See "MY MOD START/END" comments to see my inserted line. function sort_status($field, $session = NULL) { // Null session means to load the last sorted session if (!$session) $session = $GLOBALS['last_sort_session']; // Make sure the field is lower case $field = strtolower($field); // No sort function for this variable if (!function_exists("by_$field")) return NULL; // Scan the sort array for any entries matching the current choice, and remove them $depth = 0; // MY MOD START if (!isset ( $_SESSION[$session] ) return false; // MY MOD END foreach ($_SESSION[$session] as $key => $sort) { $depth++; // No match, continue looking if ($sort['field'] != $field) continue; // What to do now... return ($sort['reverse'] ? 0 - $depth : $depth); } // No match found return false; } On Wed, 26 Jan 2005 12:14:27 +, Andrew Cheung <[EMAIL PROTECTED]> wrote: > Mythweb (0.16v) displays errors whilst on the Recorded Programs: > > Warning at /var/www/html/mythweb/includes/sorting.php, line 42: > Invalid argument supplied for foreach() > > Doesn't display any recorded program details, even though there are > recordings. > > Help would be appreciated. > > Thanks > > Andrew > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] mythweb Recorded Programs Warning sorting.php line 42
I put in an if statement to only perform the foreach statement if the $_SESSION[] variable was set See "MY MOD START/END" comments to see my inserted line. function sort_status($field, $session = NULL) { // Null session means to load the last sorted session if (!$session) $session = $GLOBALS['last_sort_session']; // Make sure the field is lower case $field = strtolower($field); // No sort function for this variable if (!function_exists("by_$field")) return NULL; // Scan the sort array for any entries matching the current choice, and remove them $depth = 0; // MY MOD START if (!isset ( $_SESSION[$session] ) return false; // MY MOD END foreach ($_SESSION[$session] as $key => $sort) { $depth++; // No match, continue looking if ($sort['field'] != $field) continue; // What to do now... return ($sort['reverse'] ? 0 - $depth : $depth); } // No match found return false; } On Wed, 26 Jan 2005 12:14:27 +, Andrew Cheung <[EMAIL PROTECTED]> wrote: > Mythweb (0.16v) displays errors whilst on the Recorded Programs: > > Warning at /var/www/html/mythweb/includes/sorting.php, line 42: > Invalid argument supplied for foreach() > > Doesn't display any recorded program details, even though there are > recordings. > > Help would be appreciated. > > Thanks > > Andrew > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
mythtv-users@mythtv.org
I've got the devices being created automatically under FC3 2.6.10 but I had to do a bit of udev hacking around, specifically the permissions settings, to get it working. Can't remember the exact details at the moment, will check and post when I get home. Andy. On Wed, 26 Jan 2005 11:32:15 +, Paul Woodward <[EMAIL PROTECTED]> wrote: > > > The only 'hack' solution I found was to create the dvb devices in my startup > scripts. Not very elegant, but it worked fine... > > Paul > > > >-Original Message- > >From: Dan Robinson [mailto:[EMAIL PROTECTED] > >Sent: Wednesday, January 26, 2005 10:23 AM > >To: 'Discussion about mythtv' > >Subject: [mythtv-users] Nova-T's & > > > >I'm having problems getting my dvb devices to show up in FC3 > >(2.6.10-1.741_FC3) under udev. As per a recent mail from Axel, I've > >installed the video4linux packages to give me the drivers required for > >my 2 Nota-T cards (1 Conexant and one the older saa7146). However, I > >only get the following device after reboot, and mythtvsetup doesn't > >recognice any of my dvb cards. > > > >Can anyone help. Hopefully I've provided everything needed to assist. > > The data below was gathered immediately after reboot, I didn't do > >anything extra to load modules etc. > > > >Dan > > > >[EMAIL PROTECTED] ~]# ll /dev/dvb* > >crw--- 1 root root 212, 7 Jan 26 09:11 /dev/dvb > > > >[EMAIL PROTECTED] ~]# rpm -qa | grep video4 > >video4linux-kmdl-2.6.10-1.741_FC3-20050113_172233-54.1.rhfc3.at > >video4linux-20050113_172233-54.1.rhfc3.at > > > >Using the udev instructions from > > > >http://www.helkit.com/cgi-bin/twiki/bin/view/Main/MythTVDVB-TAndConexantNotes > > > >Added the following to /etc/udev/50-udev.rules commenting out all of > >the dvb related lines > > > ># DVB Support > >KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c" > >#KERNEL="dvb0.dvr*", NAME="dvb/adapter0/dvr%n" > >#KERNEL="dvb0.demux*", NAME="dvb/adapter0/demux%n" > >#KERNEL="dvb0.frontend*", NAME="dvb/adapter0/frontend%n" > >#KERNEL="dvb0.audio*", NAME="dvb/adapter0/audio%n" > >#KERNEL="dvb0.ca*", NAME="dvb/adapter0/ca%n" > >#KERNEL="dvb0.osd*", NAME="dvb/adapter0/osd%n" > >#KERNEL="dvb0.net*", NAME="dvb/adapter0/net%n" > >#KERNEL="dvb0.video*", NAME="dvb/adapter0/video%n" > > > >#KERNEL="dvb1.dvr*", NAME="dvb/adapter1/dvr%n" > >#KERNEL="dvb1.demux*", NAME="dvb/adapter1/demux%n" > >#KERNEL="dvb1.frontend*", NAME="dvb/adapter1/frontend%n" > >... > > > >[EMAIL PROTECTED] ~]# ll /etc/udev/rules.d/50-udev.rules > >-rw-r--r-- 1 root root 4849 Jan 26 00:09 /etc/udev/rules.d/50-udev.rules > > > >Create the following in /etc/udev/scripts/dvb.sh > >#!/bin/sh > >/bin/echo $1 | /bin/sed -e > >'s,dvb\([0-9]\)\.\([^0-9]*\)\([0-9]\),dvb/adapter\1/\2\3,' > > > >[EMAIL PROTECTED] ~]# ll /etc/udev/scripts/dvb.sh > >-rwxr-xr-x 1 root root 96 Jan 26 00:10 /etc/udev/scripts/dvb.sh > > > > > >[EMAIL PROTECTED] ~]# more /etc/modprobe.conf > >alias char-major-61 lirc_serial > >options lirc_serial irq=4 io=0x3f8 > >install lirc_serial /bin/setserial /dev/ttyS0 uart none; > >/sbin/modprobe --ignore -install lirc_serial > >alias eth0 3c59x > >alias eth1 forcedeth > >alias ath0 ath_pci > >alias snd-card-0 snd-intel8x0 > >options snd-card-0 index=0 > >install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && > >/usr/sbin/alsactl restore >/dev/null 2>&1 || : > >remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; > >}; /sbin/modprobe -r --ignore-remove snd-intel8x0 > >options snd-pcm-oss adsp_map=2 > >alias usb-controller ehci-hcd > >alias usb-controller1 ohci-hcd > ># nvidia kernel module > >alias char-major-195 nvidia-1_0-6629 > >alias char-major-81 cx88-blackbird > > > >Relevant output from dmesg > >-- > > > >saa7146: register extension 'budget_ci dvb'. > >ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 > >ACPI: PCI interrupt :01:0a.0[A] -> GSI 5 (level, low) -> IRQ 5 > >saa7146: found saa7146 @ mem e0908000 (revision 1, irq 5) (0x13c2,0x1011). > >DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI). > >adapter has MAC addr = 00:d0:5c:23:13:5c > >DVB: registering frontend 0 (Philips TDA10045H DVB-T)... > >Linux video capture interface: v1.00 > >cx2388x blackbird driver version 0.0.4 loaded > >cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T > >[card=18,autodetected] > >cx2388x v4l2 driver version 0.0.4 loaded > >ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 7 > >PCI: setting IRQ 7 as level-triggered > >ACPI: PCI interrupt :01:08.0[A] -> GSI 7 (level, low) -> IRQ 7 > >cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T > >[card=18,autodetected] > >cx88[0]/0: found at :01:08.0, rev: 5, irq: 7, latency: 64, mmio: > 0xe000 > >cx88[0]/0: registered device video0 [v4l2] > >cx88[0]/0: registered device vbi0 > > > > > >Relevant output from /var/log/messages > >-
Re: [mythtv-users] MythWeb Error
Have you tried allowing full access to your video directory ? chmod a+rwx The error reported is a permissions one i.e. the file being referenced exists but the permissions are not set correctly. Andy. On Wed, 26 Jan 2005 04:33:42 -0500, Tom E. Craddock, Jr. <[EMAIL PROTECTED]> wrote: > So...I know im some kinda idiot, just not sure which kind. I just > cannot get any tbn to show up in MythWeb when I go to the Recorded > Programs page. I get the following > > *Warning* at /var/www/html/includes/mythbackend.php, line 269: > copy(image_cache/1007_2005012522_2005012523.nuv.png): failed to > open stream: Permission denied > > Ive searched thru the mailing list and made sure that any errors others > have had with this arent what Im getting. Ive made sure that > apache/apache is the one running the web server. Ive made a symlink in > the www/html dir to the dir that holds my recorded shows, but still no > go. Anyone have any tips, hints, or old posts that I missed that would > be helpful? > > Tom > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] DVB tuning problems
Have you verified that the card can lock on to a channel and watch TV outside of Myth ? Check out the "Test Scanning and Tuning of Channels" section from the following:- http://www.ethics-gradient.net/myth/mythdvb.html Andy. On Wed, 26 Jan 2005 15:24:45 +1000, David Whyte <[EMAIL PROTECTED]> wrote: > Yup, it looks like you haven't got the correct channel data. > > In mythtvsetup, have you entered the frequencies, and other settings? > Are you sure they are the correct settings? > > Where in the world are you? > > Dave > > On Wed, 26 Jan 2005 03:27:03 +0100, Mattia Martinello > <[EMAIL PROTECTED]> wrote: > > Hi, > > > > I am trying to install mythtv with a Hauppauge Wintv Nova CI DVB card on > > Fedora Core 3 Linux box. > > I configured the card and two DVB channels in mythtv, and the card > > wizard test seems to be OK. > > When I run Mythtv I can't see any TV program. > > > > Could you help me solving this problem, please? > > I pasted in the bottom of this message the messages from mythbackend and > > mythfrontend. > > > > Thank you very much! > > Bye > > Mattia > > > > Mythbackend shows me these messages: > > > > [EMAIL PROTECTED] mythtv]# mythbackend & > > [1] 7144 > > [EMAIL PROTECTED] mythtv]# Session management error: Authentication > > Rejected, reas on : None of the authentication protocols specified are > > supported and host-based authentication failed > > Starting up as the master server. > > 2005-01-26 03:14:53 DVB#0 Using DVB card 0, with frontend ST STV0299 DVB-S. > > Resetting slot 0...ok. > > 2005-01-26 03:14:54 DVB#0 CAM - Initialized successfully. > > 2005-01-26 03:14:54 DVB#0 WARNING - Status: NO LOCK! > > 2005-01-26 03:14:54 DVB#0 WARNING - Status: CARRIER | NO LOCK! > > 2005-01-26 03:14:54 DVB#0 WARNING - Status: SIGNAL | NO LOCK! > > (Last line repeated 4 times) > > 2005-01-26 03:14:59 DVB#0 ERROR - Poll timed out too many times, bailing. > > 2005-01-26 03:14:59 DVB#0 ERROR - Tuning for channel #5 failed. > > 2005-01-26 03:14:59 mythbackend version: 0.16.20040906-1 www.mythtv.org > > 2005-01-26 03:14:59 Enabled verbose msgs : important general > > 2005-01-26 03:15:01 Found changes in the todo list. > > 2005-01-26 03:15:01 Scheduled 0 items in 0.007491 seconds. > > 2005-01-26 03:15:01 Seem to be woken up by USER > > [EMAIL PROTECTED] mythtv]# 2005-01-26 03:16:03 MainServer::HandleAnnounce > > Playback > > 2005-01-26 03:16:03 adding: localhost.localdomain as a client (events: 0) > > 2005-01-26 03:16:03 MainServer::HandleAnnounce Playback > > 2005-01-26 03:16:03 adding: localhost.localdomain as a client (events: 1) > > 2005-01-26 03:16:03 MainServer::HandleAnnounce Playback > > 2005-01-26 03:16:03 adding: localhost.localdomain as a client (events: 0) > > 2005-01-26 03:16:03 MainServer::HandleAnnounce Playback > > 2005-01-26 03:16:03 adding: localhost.localdomain as a client (events: 0) > > 2005-01-26 03:16:03 adding: localhost.localdomain as a remote ringbuffer > > 2005-01-26 03:16:03 Changing from None to WatchingLiveTV > > 2005-01-26 03:16:03 DVB#0 Recorder: Card opened successfully. > > 2005-01-26 03:16:04 DVB#0 WARNING - No data from card in 1 second. > > (Last line repeated 16 times) > > 2005-01-26 03:16:18 Couldn't read data from the capture card in 15 > > seconds. Gam e over, man. > > 2005-01-26 03:16:19 DVB#0 WARNING - No data from card in 1 second. > > (Last line repeated 16 times) > > 2005-01-26 03:16:34 Changing from WatchingLiveTV to None > > 2005-01-26 03:16:35 DVB#0 WARNING - No data from card in 1 second. > > 2005-01-26 03:16:35 Closing DVB recorder > > [EMAIL PROTECTED] mythtv]# > > > > Mythfrontend shows me these messages: > > > > [EMAIL PROTECTED] share]$ /usr/bin/mythfrontend > > 2005-01-26 03:15:57 mythfrontend version: 0.16.20040906-1 www.mythtv.org > > 2005-01-26 03:15:57 Enabled verbose msgs : important general > > 2005-01-26 03:15:58 Registering Internal as a media playback plugin. > > 2005-01-26 03:15:58 Registering MythDVD DVD Media Handler as a media handler > > 2005-01-26 03:15:58 Registering MythDVD VCD Media Handler as a media handler > > 2005-01-26 03:15:59 Registering MythMusic Media Handler as a media handler > > SIP listening on IP Address 192.168.1.150:5060 NAT address 192.168.1.150 > > SIP: Cannot register; proxy, username or password not set > > 2005-01-26 03:16:03 Connecting to backend server: 127.0.0.1:6543 (try 1 > > of 5) > > 2005-01-26 03:16:03 Using protocol version 13 > > (Last line repeated 3 times) > > 2005-01-26 03:16:08 taking too long to be allowed to read.. > > (Last line repeated 3 times) > > 2005-01-26 03:16:20 Waited 2 seconds for data to become available, > > waiting again ... > > (Last line repeated 8 times) > > 2005-01-26 03:16:34 Waited 14 seconds for data to become available, aborting > > Couldn't read file: rbuf://127.0.0.1:6543/video/buffer/ringbuf1.nuv > > 2005-01-26 03:16:34 Changing from None to WatchingLiveTV > > 2005-01-26 03:16:34 Decoder not alive, and trying to play.. > > 2005-01-26 03:16:35 Changing from No
Re: [mythtv-users] Re: Help: getting lirc working under FC3 with aHauppauge Nova-t DVB card
I've got the new Nova-t card with remote and have got it working with Myth 0.16 using lircd 0.70 under FC3, kernel 2.6.10. I used the instructions from here :- http://spamtastic.demon.co.uk/v4l/ Works very nicely, next step is to get Myth picking up the remote 'events' directly and drop the need for lircd. Andy. On Tue, 25 Jan 2005 15:19:47 +, Paul Woodward <[EMAIL PROTECTED]> wrote: > > > I couldn't get lirc to work with the Nova-T remote, but I modified > budget-ci.c so that it output myth-compatible keypresses and it works a > treat. > > Have a look at this: > http://www.linuxtv.org/mailinglists/linux-dvb/2004/09-2004/msg00207.html > > The only addition is that you may want to map a button to KEY_BACKSPACE > which I did with the red button. > > Paul > > > >-Original Message- > >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > >Sent: Tuesday, January 25, 2005 03:00 PM > >To: ''Discussion about mythtv'' > >Subject: RE: [mythtv-users] Re: Help: getting lirc working under FC3 with > aHauppauge Nova-t DVB card > > > > > >Nick wrote: > >> > >> > >> > >> > I'm having no luck however getting the remote control supplied with > >> > the nova-t working under lirc. Has anyone out there got the nova-t > >> > remote working with lirc under FC3 ? > > > >I tried using the (working) pvr-350's IR receiver/lirc setup to set up > >the nova-t > >remote, irrecord failed to find a gap[1] and bombed out. > > > >Rather a pity as the nova-t remote has lots more buttons on than the > >pvr-350's > >and I would have thought that two remotes from the same manufacturer > >would at least > >share the same codes but there's obviously something strange going on. > > > >I haven't got the nova-t card working yet so I haven't even tried the IR > >port on that > >so I don't even know if lirc will use it. > > > >David > > > >[1] My camera says the remote is at least doing something so it's > >probably not broken. > > > > > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Avermedia DVB-T remote
You could run lircd in "event" mode :- lircd --driver=dev/input --device=/dev/input/event3 -p 660 /etc/lircd.conf Then compile in native lirc support into Myth, setup a ~/.mythtv/lircd mapping file and off you go On the DVB card, the Hauppauge Nova-T PCI card is pretty good, I got one from PC World currently on sale at £50. Andy. On Mon, 24 Jan 2005 20:56:14 +, Andy Shaw <[EMAIL PROTECTED]> wrote: > Hi, > > I've recently setup mythtv, a lengthy process (certainly on an epia-m) > but at last it's all coming together. I have one last wish and that's to > get my remote control working with Myth. It's the controller that comes > with the Avermedia DVB-T TV card and I've had some minor success > already. By loading the ir_kbd_gpio I've found that the controller sends > events to /dev/input/event3. My question is how should I go about > mapping these events to mythtv? > > Currently the controller does have some effect over myth (up is down, > down is up, etc) but little else. > > If anyone could offer any advice it'd be much appreciated. > > Kind regards > Andy > > BTW, if anyone's thinking of going for an Avermedia DVB-T (low profile) > card in the UK I'd recommend against it. While my standalone Freeview > box picks up everything the Aver barely picks up a thing - and that's > with the latest firmware too. > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Mythweb install error: Can't connect to local MySQL server through socket
OK, disabling SE Linux security did the trick! Need to find a less severe fix in the background but I'll continue with SE switched off at the moment. Thanks for the help! Andy P.S Found this thread on the subject :- http://www.linuxquestions.org/questions/history/260126 On Thu, 20 Jan 2005 23:37:22 +0000, Andy Whitworth <[EMAIL PROTECTED]> wrote: > Yep, both php and mysql installed as packages during the FC3 install. > > I'll try disabling the SE thing - ta. > > Andy. > > > On Thu, 20 Jan 2005 15:30:21 -0800, Chris Petersen > <[EMAIL PROTECTED]> wrote: > > > Trying to get MythWeb up and running but when I point the browser at the > > > homepage then I get:- > > > > > > Warning at /var/www/html/mythweb/includes/init.php, line 63: > > > mysql_connect(): Can't connect to local MySQL server through socket > > > '/var/lib/mysql/mysql.sock' (13) Fatal Error at > > > /var/www/html/mythweb/includes/init.php, line 64: > > > Can't connect to the database server. Did you use the correct settings > > > in config/conf.php? > > > > ... > > > > > I've tried installing phpmyadmin also and it gives the same socket error. > > > > ... > > > > > FC3, Myth 0.16, MythWeb 0.16, mysql Ver 11.18 Distrib 3.23.58, for > > > redhat-linux-gnu (i386) > > > > I'm a little confused here. At first I thought it might be that php was > > compiled with some part of the mysql support missing, but if it's > > packages, that should be fine. > > > > The only other thing that comes to mind is the new SE Linux stuff that's > > in fc3. Try turning that off (it's under security settings, I think), > > it'll require a reboot. > > > > -Chris > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Mythweb install error: Can't connect to local MySQL server through socket
Hi, Trying to get MythWeb up and running but when I point the browser at the homepage then I get:- Warning at /var/www/html/mythweb/includes/init.php, line 63: mysql_connect(): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (13) Fatal Error at /var/www/html/mythweb/includes/init.php, line 64: Can't connect to the database server. Did you use the correct settings in config/conf.php? The system administrator has been notified and the problem will be remedied shortly. = conf.php has the following Db entries:- define('db_host', 'localhost'); define('db_username', 'mythtv'); define('db_password', 'mythtv'); define('db_dbname', 'mythconverg'); === I can connect to the Db on the command line:- [EMAIL PROTECTED] ~]$ mysql -umythtv -pmythtv mythconverg Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 74 to server version: 3.23.58 Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> select count(*) from channel; +--+ | count(*) | +--+ | 25 | +--+ 1 row in set (0.00 sec) mysql> = The socket mentioned in the error exists:- [EMAIL PROTECTED] ~]$ ls -l /var/lib/mysql/mysql.sock srwxrwxrwx 1 mysql mysql 0 Jan 20 21:02 /var/lib/mysql/mysql.sock == mysqld is running:- [EMAIL PROTECTED] includes]$ ps -ef|grep mysql root 4018 1 0 21:02 ?00:00:00 /bin/sh /usr/bin/safe_mysqld --defaults-file=/etc/my.cnf mysql 4042 4018 0 21:02 ?00:00:05 /usr/libexec/mysqld --defaults-file=/etc/my.cnf --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking === I'm stumped! I've tried installing phpmyadmin also and it gives the same socket error. Any ideas ? FC3, Myth 0.16, MythWeb 0.16, mysql Ver 11.18 Distrib 3.23.58, for redhat-linux-gnu (i386) Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Skipping adverts in UK using DVB-T - supported ?
My TV when in 'auto' mode often switches to/from 16:9 when the ad break appears so I guess there is a physical change ? I think this would be a useful detection trigger to add to the list! Andy. On Thu, 20 Jan 2005 00:00:05 GMT, Tom Hughes <[EMAIL PROTECTED]> wrote: > In message <[EMAIL PROTECTED]> > "Chris Pinkham" <[EMAIL PROTECTED]> wrote: > > > > Haven't updated my cvs version yet to try the new detection, but does > > > it also monitor for aspect ratio changes? Just noticed while watching > > > tv yesterday quite a few channels change aspect ratio when they switch > > > to the adverts (I'm in the UK). > > > > > > In this situation it could be a very accurate way for detecting ads. > > > > Is this a physical aspect ratio change or does the frame stay the same > > ratio and have black bars on the top/bottom? I have a sample of a UK > > broadcast that uses the black bars and will be trying to code up something > > to detect that transition so it can be used to determine where commercials > > start/stop. If you mean a physical frame aspect ratio change, then I'd > > like to detect this at some point but don't have any sample recordings > > to test with right now (I'm in the U.S. with analog cable). > > Well it would be black bars on the side of the program if anything > rather than black bars on the top and bottom of the adverts. > > In a DVB-T stream there are two ways of handling aspect ratios. For > simple 4:3 vs 16:9 it can be done with a simple flag. In that case > then the transmitted data is always the full picture area and the > flag tells the receiver what aspect ratio to use when displaying > the data - the resolution doesn't change, so would be 720x576 or > 704x576 in the UK depending on the channel. > > The other option is to use an AFD where a 16:9 picture is transmitted > and if the content is 4:3 then there are black bars on each side. There > is then an Active Format Descriptor (AFD) which indicates which part > of the transmitted picture to display. That allows more choice of > ratios but in the UK at least only 4:3 and 16:9 are used. > > Some channels use AFDs in the UK and some use the simple flag. Most > of the AFD channels don't have adverts however, but I think there is > one that does - certainly Five was, but it may have changed recently. > > I'm not sure how Myth handles those two cases however, or what you > see in the stream when you read it back from disk. > > Tom > > -- > Tom Hughes ([EMAIL PROTECTED]) > http://www.compton.nu/ > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Nova-t remote with linux 2.6
Hi, I got my Nova-t remote working with Myth last night after a couple of days frustrating effort. I use Fedora Core 3 and kernel 2.6.10, lircd 0.7. My Nova-t card is one of the newer conexant based models with the remote receiver plugged into the back of the card. The remote is the black/grey Hauppauge control. What worked for my setup:- 1. Followed the instructions here:- http://spamtastic.demon.co.uk/v4l/ 2. Compiled lirc using the "Other->/dev/input" driver option 3. Run lircd as "lircd --driver=dev/input --device=/dev/input/event2 -p 660 /etc/lircd.conf 4. Ensure myth is compiled with native lircd support (check settings.pro) 5. Enjoy. With this setup I don't need a /dev/lirc device, just a /dev/lircd pipe which lirc ."make install" created but doesn't get recreated on reboot using udev. So at the moment I've got a mknod in /etc/rc.d/rc.local to create the pipe, change the permissions so all can rw and then start lircd (params as above). There are ' better' ways of doing this and I'll be tweaking that next. Hope this helps! Andy. On Tue, 18 Jan 2005 20:41:00 +, Mark Howells <[EMAIL PROTECTED]> wrote: > Hi, > > I've been away from mythtv for a while but have now restarted mythtv > project./ I've got a Nova-t dvb card but can't get the remote to > work. It partly works, in as much as the buttons 0 through 9 deliver > some events to /dev/input/event0. So, for example when I press '1' on > the remote i get '' on the active terminal window. However, > evtest doesn't detect anything on any remote press (even the '1' > button). > > I expected that all events would be routed to event0 - but something > is obviosly preventing that and somewhat erroneously translating a > single key press into a 4 byte string. > > Any help would be appreciated. > > Cheers > > mark > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Intermittent video issues
Hi, Quite frequently when watching either live TV or recordings the video picture becomes corrupt. I get either overlaid colour planes or a purple tinge to the picture. Stopping viewing and then restarting viewing can result in the problem going away or sometimes it doesn't. The same thing happens in mplayer also. I'm using a Hauppauge Nova-T DVB-T PCI card with Fedora Core3, 2.6.10 and Myth 0.16 (no patches). Both frontend and backend are running on the same box, P4 2.4Ghz 1Gb RAM, 160GB Maxtor IDE HDD so I've got plenty of horsepower. I'm currently using Myth on my TFT monitor and the VGA output is handled by on-board motherboard stuff. Mobo is an Abit BG7E which has Intel 845GE graphics. The corruption isn't recorded and so I guess the data stream from the DVB-T card is OK but is being screwed up by the frontend. The corruption doesn't completely mess up the picture in that you can see what's going on but the colour mix is incorrect or the colour planes overlaid. Corruption doesn't always happen, perhaps 10-20% of the time ? CPU is only 10-20% utilised. Any ideas ? Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Re: Skipping adverts in UK using DVB-T - supported ?
Further to my comments below I actually tried recording a selection of programmes last night from a couple of channels, the commercial detection did pick stuff up on one of the programmes so it is doing something ;-) When I played back the recording the system seemed to get it right over 50% of the time! So all is not lost but I guess the FF button is currently the way to go. Andy. On Mon, 17 Jan 2005 09:13:37 +, Andy Whitworth <[EMAIL PROTECTED]> wrote: > Hi, > > Am I correct in believing that commercial detection/skipping > doesn't work in the UK when using DVB-T ? When I press > the 'skip' button during an ad while watching a recording then > I get a message to the effect that no marker is found (can't > remember exact wording). The channel is setup as one which > does have commercials. > > Or has anyone in UK got ad detection working using DVB-T ? > > Thanks, > > Andy. > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Skipping adverts in UK using DVB-T - supported ?
Hi, Am I correct in believing that commercial detection/skipping doesn't work in the UK when using DVB-T ? When I press the 'skip' button during an ad while watching a recording then I get a message to the effect that no marker is found (can't remember exact wording). The channel is setup as one which does have commercials. Or has anyone in UK got ad detection working using DVB-T ? Thanks, Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Help: getting lirc working under FC3 with a Hauppauge Nova-t DVB card
Hi, I've just spent the weekend getting MythTv up and running on a new Linux build, it's been an 'interesting' task with a few challenges cropping up but I've managed to get Myth running and I can watch/record and have a TV guide. I'm having no luck however getting the remote control supplied with the nova-t working under lirc. Has anyone out there got the nova-t remote working with lirc under FC3 ? My setup: Hardware: P4 2.4Ghz 1Gb RAM 160Gb Maxtor Diamondmax 10 HDD Hauppauge Nova-T DVB card Software: Fedora Core 3 2.6.10 kernel (with linuxtv DVB patches) lirc-0.7.0.0 (source/compile installation) Environment: Surrey, UK - Crystal Palace transmitter When running the lirc ./setup.sh configuration I've tried both the Hauppauge hardware options as well as the "Other->Linux events" (or whatever it's called) options all with no success. irw does nothing, irrecord also does nothing. Help!!! Andy. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users