RE: [Repeater-Builder] TKR-720/820

[Jim Cicirello]

Try
http://www.kenwoodparts.com/parts/search.php?kwparts_Session=15dece920f6b0c9
e54caeccb4cb35203

This website advertises over 100,000 Kenwood 
Parts.

Good Luck  Jim  KA2AJH





























































   


Jim Cicirello
181 Stevens Street
Wellsville, New York 14895
585.593.4655
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of WD7F - John in Tucson
Sent: Sunday, November 26, 2006 2:46 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] TKR-720/820

Can anyone tell me a source for parts for the TKR-720/820 repeater.  Is
Kenwood the only source?  I have a Signaling Unit that crapped out.
Somebody on the board is dragging down the 5V regulated and it's not easy
for this old guy to see that tiny stuff, let alone solder it.

de WD7F
John in Tucson





 
Yahoo! Groups Links

Re: [Repeater-Builder] Wanted: 1 5/8" N-type air hardline connector

[Paul Guello]

Try Surplus Sales of Nebraska they have some;
http://www.surplussales.com/Connectors/HardL-4.html
Paul kb9wlc


--- dvickn4ome <[EMAIL PROTECTED]> wrote:

> Recently our repeater site was burglarized and the
> connector along with 
> several feet of the 1 5/8" air hardline was stolen.
> (for the copper)  
> There were several other pieces of hardline also
> stolen.  I'm willing 
> to purchase a 1 5/8" N-type connector for air
> hardline.  I would 
> appreciate hearing if anyone has a connector or a
> source for one.
> 
> Thanks
> Darryl - N4OME
> 
> 



 

Cheap talk?
Check out Yahoo! Messenger's low PC-to-Phone call rates.
http://voice.yahoo.com

Re: [Repeater-Builder] Re: GE EXEC II UHF Exciter Help Needed

[Kevin Custer]

At 11/25/2006 15:43, you wrote:
  

Ooops, I typed in the wrong radio.  I am working on the UHF Exec II
radio.  Not sure what I was thinking, so now it's information I need
on the UHF and not the VHF.  No wonder why the coils are not in the
right place.



If you need the tuning instructions for the UHF Exec II/MVP, it's here:


I see that the tables render a little "fat" in Mozilla.  I'm sending Kevin 
an updated file that fixes that.


Bob NO6B


File uploaded to the server, please refresh the page to see the changes.

Thanks,
Kevin

Re: [Repeater-Builder] TKR-720/820

[WD7F - John in Tucson]

Thank you..$178.14 or $188.27 for the signaling unit.  Better than
buying another repeater.  I have the URLs bookmarked.

de WD7F
John in Tucson

- Original Message - 
From: "Jeff Hunt / ICS Radio" <[EMAIL PROTECTED]>
To: 
Sent: Sunday, November 26, 2006 4:18 PM
Subject: RE: [Repeater-Builder] TKR-720/820


www.kenwoodparts.com
www.partstore.com

Jeff

-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Maire-Radios
Sent: Sunday, November 26, 2006 2:10 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] TKR-720/820

Kenwood has a parts depot in both the west cost and east cost.  I am not
sure if they sell to non dealers.

John


- Original Message -
From: "WD7F - John in Tucson" <[EMAIL PROTECTED]>
To: 
Sent: Sunday, November 26, 2006 2:46 PM
Subject: [Repeater-Builder] TKR-720/820


> Can anyone tell me a source for parts for the TKR-720/820 repeater.  Is
> Kenwood the only source?  I have a Signaling Unit that crapped out.
> Somebody on the board is dragging down the 5V regulated and it's not easy
> for this old guy to see that tiny stuff, let alone solder it.
>
> de WD7F
> John in Tucson
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>







Yahoo! Groups Links









Yahoo! Groups Links







-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.14.16/552 - Release Date: 11/26/2006






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Repeater-Builder/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:[EMAIL PROTECTED] 
mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

[Repeater-Builder] Wanted: 1 5/8" N-type air hardline connector

[dvickn4ome]

Recently our repeater site was burglarized and the connector along with 
several feet of the 1 5/8" air hardline was stolen. (for the copper)  
There were several other pieces of hardline also stolen.  I'm willing 
to purchase a 1 5/8" N-type connector for air hardline.  I would 
appreciate hearing if anyone has a connector or a source for one.

Thanks
Darryl - N4OME

Re: [Repeater-Builder] TKR-720/820

[WD7F - John in Tucson]

I suffer with the inability to walk away from an electronics
malfunction...can't sleep, can't think of anything else.  Turns out that the
22 uFD electrolytic where the 12.8 V comes into the signaling unit had
failed.  I took it out and the thing worked for a few seconds.  I measured
the resistance of the in-series 10 ohm surface mount resistor preceeding the
cap and it was reading 750 ohms.  I jumped it with a 10 ohm resistor and
everything started working.

I suppose the heat from the soldering iron may have screwed up that
resistor, but it seems unlikely.  Danged if I know! Ain't electronics fun?

Anyway, I STILL wonder if it's possible to find circuit boards for the
TKR720/820.

de WD7F
John in Tucson

- Original Message - 
From: "WD7F - John in Tucson" <[EMAIL PROTECTED]>
To: 
Sent: Sunday, November 26, 2006 12:46 PM
Subject: [Repeater-Builder] TKR-720/820


Can anyone tell me a source for parts for the TKR-720/820 repeater.  Is
Kenwood the only source?  I have a Signaling Unit that crapped out.
Somebody on the board is dragging down the 5V regulated and it's not easy
for this old guy to see that tiny stuff, let alone solder it.

de WD7F
John in Tucson






Yahoo! Groups Links







-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.14.16/552 - Release Date: 11/26/2006







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Repeater-Builder/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:[EMAIL PROTECTED] 
mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

RE: [Repeater-Builder] GE Exec Time Out Timer issue needs attention

[Thomas Oliver]

I think you could just unplug it? It plugs into the system board I believe.
Near the center of the board there is a row of 6 pins it just plugs onto.
It may even have a variable resistor to set the time (I cant remember for
sure). I have seen some but never used one on my stuff. I imagine you could
increace capacitor or resistor sizes on the timer board til you get it long
enough to suit you.


tom


> [Original Message]
> From: n9lv <[EMAIL PROTECTED]>
> To: 
> Date: 11/26/2006 3:34:32 PM
> Subject: [Repeater-Builder] GE Exec Time Out Timer issue needs attention
>
> Is there a way to bypass the time out timer in the GE or at least 
> change it to more than one minute, more like 4 minutes.  Also, when 
> the time out timer kicks in, the radio has to be shut off in order to 
> get it to reset.  Is there a fix to bypass this as well.  Thanks.
>
> Mathew
>
>
>
>
>
>
>  
> Yahoo! Groups Links
>
>
>

[Repeater-Builder] Needed: Motorola PL Reed; TLN-8381A

[William E. Janes]

I am looking for one or more Motorola PL Reed; TLN-8381A on 79.7 Hz (WB) for a Club Repeater project (K9HAM). 
This is the one that goes in the SpectraTac voting and auxiliary receivers "Coded Squelch" module.

I have several of the TLN-8381A, TLN-6824A and KLN-6209A reeds on assorted 
freqs to trade if you are interested. I also have  Micor channel elements that 
I am willing to trade.
If all else fails I can pay for the reed(s).

Please email me off list ==>  [EMAIL PROTECTED]

Thanks
Bill
N9SII

(This message cross posted to several groups)

RE: [Repeater-Builder] TKR-720/820

[Jeff Hunt / ICS Radio]

www.kenwoodparts.com
www.partstore.com

Jeff

-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Maire-Radios
Sent: Sunday, November 26, 2006 2:10 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] TKR-720/820

Kenwood has a parts depot in both the west cost and east cost.  I am not
sure if they sell to non dealers.

John


- Original Message -
From: "WD7F - John in Tucson" <[EMAIL PROTECTED]>
To: 
Sent: Sunday, November 26, 2006 2:46 PM
Subject: [Repeater-Builder] TKR-720/820


> Can anyone tell me a source for parts for the TKR-720/820 repeater.  Is
> Kenwood the only source?  I have a Signaling Unit that crapped out.
> Somebody on the board is dragging down the 5V regulated and it's not easy
> for this old guy to see that tiny stuff, let alone solder it.
>
> de WD7F
> John in Tucson
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
> 






 
Yahoo! Groups Links

Re: [Repeater-Builder] TKR-720/820

[Maire-Radios]

Kenwood has a parts depot in both the west cost and east cost.  I am not 
sure if they sell to non dealers.

John


- Original Message - 
From: "WD7F - John in Tucson" <[EMAIL PROTECTED]>
To: 
Sent: Sunday, November 26, 2006 2:46 PM
Subject: [Repeater-Builder] TKR-720/820


> Can anyone tell me a source for parts for the TKR-720/820 repeater.  Is
> Kenwood the only source?  I have a Signaling Unit that crapped out.
> Somebody on the board is dragging down the 5V regulated and it's not easy
> for this old guy to see that tiny stuff, let alone solder it.
>
> de WD7F
> John in Tucson
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
> 






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Repeater-Builder/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:[EMAIL PROTECTED] 
mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

[Repeater-Builder] GE Exec Time Out Timer issue needs attention

[n9lv]

Is there a way to bypass the time out timer in the GE or at least 
change it to more than one minute, more like 4 minutes.  Also, when 
the time out timer kicks in, the radio has to be shut off in order to 
get it to reset.  Is there a fix to bypass this as well.  Thanks.

Mathew

Re: [Repeater-Builder] Re: GE EXEC II UHF Exciter Help Needed

[Mathew Quaife]

Just to say thanks to all who helped in getting this pup setup, the first one 
is done and working well.  All is left is getting the xtals, cw id'er and a 
tone board for the receiver and it's ready to go on the air.
   
  The looks are crude, but the performance is awesome.  Thanks again.
   
  Mathew
  

[EMAIL PROTECTED] wrote:
  At 11/25/2006 15:43, you wrote:
>Ooops, I typed in the wrong radio. I am working on the UHF Exec II
>radio. Not sure what I was thinking, so now it's information I need
>on the UHF and not the VHF. No wonder why the coils are not in the
>right place.

If you need the tuning instructions for the UHF Exec II/MVP, it's here:


I see that the tables render a little "fat" in Mozilla. I'm sending Kevin 
an updated file that fixes that.

Bob NO6B



 

 
-
Everyone is raving about the all-new Yahoo! Mail beta.

[Repeater-Builder] TKR-720/820

[WD7F - John in Tucson]

Can anyone tell me a source for parts for the TKR-720/820 repeater.  Is
Kenwood the only source?  I have a Signaling Unit that crapped out.
Somebody on the board is dragging down the 5V regulated and it's not easy
for this old guy to see that tiny stuff, let alone solder it.

de WD7F
John in Tucson





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Repeater-Builder/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:[EMAIL PROTECTED] 
mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

[Repeater-Builder] hamtronics trade

[michaeltylerwv]

I have a hamtronics rep-200 receiver and transmitter on vhf Ham that I 
would like to trade for same only UHF hamanybody that would like to 
trade nice used working vhf for nice used working uhf , please contact 
me..thanks..mike...wa8ywo

Re: [Repeater-Builder] First repeater and need some info

[N9LLO]

Sounds like you need to repair/replace the station control or the repeater 
control board. You might need to look at the line driver also. I dont have a 
manual in front of me so I am going from memory. You need the service manual 
and 
some test equipment.

Chris
N9LLO