date:20160826

** Branch linked: lp:~apparmor-dev/apparmor/apparmor-ubuntu-citrain

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apparmor in Ubuntu.
https://bugs.launchpad.net/bugs/1614215

Title:
  "md5sums differ" message seems to indicate an install problem

Status in AppArmor:
  Invalid
Status in Ubuntu GNOME:
  Invalid
Status in apparmor package in Ubuntu:
  In Progress
Status in apparmor source package in Xenial:
  In Progress
Status in apparmor source package in Yakkety:
  In Progress

Bug description:
  [Impact]
  Confusing output from a diff command executed during the apparmor update 
process leaves users concerned about the state of their system.

  [Test Case]
  1. Make sure that apparmor 2.10.95-0ubuntu2 from the -release pocket is 
installed

  2. Update to the apparmor package in -proposed

  3. Look at the output during the update process to verify that the
  following message is *not* printed:

Files /var/lib/dpkg/info/apparmor.md5sums and
  /var/lib/apparmor/profiles/.apparmor.md5sums differ

  [Regression Potential]
  Considered to be extremely low. The change is a one-liner that pipes the 
stdout of diff command to /dev/null (the -q option of diff is not sufficient).

  [Original description]

  Upon applying the latest Ubuntu routine-update, I observed these
  messages:

  Setting up apparmor (2.10.95-0ubuntu2.2) ...
  Installing new version of config file 
/etc/apparmor.d/abstractions/dbus-session-strict ...
  update-rc.d: warning: start and stop actions are no longer supported; falling 
back to defaults
  Skipping profile in /etc/apparmor.d/disable: usr.sbin.apache2
  Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
  Files /var/lib/dpkg/info/apparmor.md5sums and 
/var/lib/apparmor/profiles/.apparmor.md5sums differ

  "The reason why I am filing a bug report" is the LAST line.  I presume
  that if md5sums do not agree, something was probably done improperly
  in preparing this particular software-update blast.

  However, in-passing, I would also point out line #3, about "start and
  stop actions no longer supported." That seems to me to be something
  (of much less importance, obviously) that might have been overlooked.
  (I've seen =that= message for some time now.)

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: apparmor 2.10.95-0ubuntu2.2
  ProcVersionSignature: Ubuntu 4.4.0-34.53-generic 4.4.15
  Uname: Linux 4.4.0-34-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  Date: Wed Aug 17 14:22:55 2016
  InstallationDate: Installed on 2016-03-02 (168 days ago)
  InstallationMedia: Ubuntu-Server 15.10 "Wily Werewolf" - Release amd64 
(20151021)
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdline: BOOT_IMAGE=/vmlinuz-4.4.0-34-generic 
root=/dev/mapper/hostname--vg-root ro
  SourcePackage: apparmor
  Syslog:
   Aug 10 10:36:07 IntersignVM dbus[1638]: [system] AppArmor D-Bus mediation is 
enabled
   Aug 11 13:10:08 IntersignVM dbus[1655]: [system] AppArmor D-Bus mediation is 
enabled
   Aug 16 08:40:24 IntersignVM dbus[1693]: [system] AppArmor D-Bus mediation is 
enabled
   Aug 17 13:58:37 IntersignVM dbus[1657]: [system] AppArmor D-Bus mediation is 
enabled
  UpgradeStatus: Upgraded to xenial on 2016-05-11 (98 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/apparmor/+bug/1614215/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1580463] Re: Snap blocks access to system input methods (ibus, fcitx, ...)

** Branch linked: lp:~apparmor-dev/apparmor/apparmor-ubuntu-citrain

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apparmor in Ubuntu.
https://bugs.launchpad.net/bugs/1580463

Title:
  Snap blocks access to system input methods (ibus, fcitx, ...)

Status in apparmor package in Ubuntu:
  In Progress
Status in im-config package in Ubuntu:
  Fix Released
Status in snapd package in Ubuntu:
  Fix Released
Status in apparmor source package in Xenial:
  Triaged
Status in im-config source package in Xenial:
  In Progress
Status in snapd source package in Xenial:
  Fix Released
Status in apparmor source package in Yakkety:
  In Progress
Status in im-config source package in Yakkety:
  Fix Released
Status in snapd source package in Yakkety:
  Fix Released

Bug description:
  = SRU im-config =
  [Impact]
  ibus-daemon by default uses a unix socket name of /tmp/dbus-... that is 
indistinguishable from dbus-daemon abstract sockets. While dbus-daemon has 
AppArmor mediation, ibus-daemon does not so it is important that its abstract 
socket not be confused with dbus-daemon's. By modifying ibus-daemon's start 
arguments to use "--address 'unix:tmpdir=/tmp/ibus'" AppArmor can continue 
mediating DBus abstract sockets like normal and also mediate access to the 
ibus-daemon-specific abstract socket via unix rules. This also tidies up the 
abstract socket paths so that it is clear which are for ibus-daemon, which for 
dbus-daemon, etc.

  The upload simply adjusts 21_ibus.rc to start ibus-daemon with "--
  address 'unix:tmpdir=/tmp/ibus'" and adds a comment. No compiled code
  changes are required.

  [Test Case]
  1. start a unity session before updating to the package in -proposed

  2. $ grep IBUS_ADDRESS ~/.config/ibus/bus/*-unix-0
  
IBUS_ADDRESS=unix:abstract=/tmp/dbus-Vyx8fGFA,guid=28e8e7e89f902c8d4e9d77c5557add76

  3. $ lsof -p $(pidof ibus-daemon) | grep '/dbus'
  ibus-daem 2973 jamie8u unix 0x  0t0   29606 
@/tmp/dbus-oxKYpN30 type=STREAM

  4. update the package in -proposed and perform '2' and '3'. The
  IBUS_ADDRESSES should be the same as before

  5. logout of unity, then log back in

  6. $ grep IBUS_ADDRESS ~/.config/ibus/bus/*-unix-0
  
IBUS_ADDRESS=unix:abstract=/tmp/ibus/dbus-SpxOl8Fc,guid=06d4bbeb07614c6dffbf221c57473f4e

  (notice '/tmp/ibus/' in the path)

  7. $ lsof -p $(pidof ibus-daemon) | grep '/dbus'
  ibus-daem 3471 jamie8u unix 0x  0t0  26107 
@/tmp/ibus/dbus-SpxOl8Fc type=STREAM
  ...

  (notice '@/tmp/ibus/' in the path)

  In addition to the above, you can test for regressions by opening
  'System Settings' under the 'gear' icon in the panel and selecting
  'Text Entry'. From there, add an input source on the right, make sure
  'Show current input source in the menu bar' is checked, then use the
  input source panel indicator to change input sources.

  [Regression Potential]

  The regression potential is considered low because there are no
  compiled code changes and because the changes only occur after ibus-
  daemon is restarted, which is upon session start, not package upgrade.
  When it is restarted, the files in ~/.config/ibus/bus/*-unix-0 are
  updated accordingly for other applications to pick up.

  This change intentionally requires a change to the unity7 snapd
  interface, which is in progress. Currently the change should not
  regress snapdsbehavior due to other issues surrounding using ibus
  unrelated to security policy.

  = SRU apparmor =
  [Impact]
  The upload that adjusts ibus-daemon to start with "--address 
'unix:tmpdir=/tmp/ibus'" causes the ibus AppArmor abstraction to no longer be 
sufficient due to the lack of a rule for the new socket path. This upload adds 
such a rule.

  [Test Case]
  1. Start a unity session after updating to the im-config package in -proposed 
but before the apparmor package in -proposed

  2. Use the ibus client program to list the available engines
  $ ibus list-engine
  language: Spanish; Castilian
xkb:latam::spa - Spanish (Latin American)
xkb:es::spa - Spanish
  language: Slovak
xkb:sk:qwerty:slo - Slovak (qwerty)
xkb:sk::slo - Slovak
  ...

  3. Create an AppArmor profile file, called ibus, with the following
  contents:

  #include 

  profile ibus {
#include 
#include 
#include 

/usr/bin/ibus mr,

  }

  4. Load the profile
  $ sudo apparmor_parser -qr ibus

  5. Rerun the ibus client program under confinement to see that it fails
  $ aa-exec -p ibus -- ibus list-engine
  Can't connect to IBus.

  6. Note the AppArmor denial in the syslog

  audit: type=1400 audit(1472252079.589:57): apparmor="DENIED"
  operation="connect" profile="ibus" pid=5364 comm="ibus" family="unix"
  sock_type="stream" protocol=0 requested_mask="send receive connect"
  denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-
  kxnhAsmv" peer="unconfined"

  7. Update to the apparmor package in

[Touch-packages] [Bug 1617493] [NEW] /usr/lib/arm-linux-gnueabihf/qt5/bin/qmlscene:11:TryDispatchMessageToTarget:OnReceiveScriptMessage:OnMessageReceived:OnMessageReceived:OnMessageReceived

2016-08-26 Thread errors.ubuntu.com bug bridge

Public bug reported:

The Ubuntu Error Tracker has been receiving reports about a problem
regarding qtdeclarative-opensource-src.  This problem was most recently
seen with version 5.4.1-1ubuntu11~overlay9~1, the problem page at
https://errors.ubuntu.com/problem/2a9bf9dc8acf7b51f5273ab189194ce311d33ee9
contains more details.

** Affects: qtdeclarative-opensource-src (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: vivid

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtdeclarative-opensource-
src in Ubuntu.
https://bugs.launchpad.net/bugs/1617493

Title:
  /usr/lib/arm-linux-
  
gnueabihf/qt5/bin/qmlscene:11:TryDispatchMessageToTarget:OnReceiveScriptMessage:OnMessageReceived:OnMessageReceived:OnMessageReceived

Status in qtdeclarative-opensource-src package in Ubuntu:
  New

Bug description:
  The Ubuntu Error Tracker has been receiving reports about a problem
  regarding qtdeclarative-opensource-src.  This problem was most
  recently seen with version 5.4.1-1ubuntu11~overlay9~1, the problem
  page at
  https://errors.ubuntu.com/problem/2a9bf9dc8acf7b51f5273ab189194ce311d33ee9
  contains more details.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtdeclarative-opensource-src/+bug/1617493/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1509562] Re: no icons for menu, folders, directories, files

2016-08-26 Thread sheny

[url=http://www.iub.edu.pk/about_me.php]Cheap Pandora[/url]
[url=http://www.iub.edu.pk/Events.php]Wholesale Pandora charms[/url]
[url=http://www.iub.edu.pk/fashion.php]cheap Pandora Charms[/url]
[url=http://www.iub.edu.pk/help.php]Pandora Charms cheap[/url]
[url=http://www.iub.edu.pk/info.php]Pandora Jewelry[/url]
[url=http://www.iub.edu.pk/iubdns.php]Wholesale Pandora[/url]
[url=http://www.cheapjewe11erystore.com/]Cheap Pandora Store[/url]
[url=http://www.cheapjewe11erystore.com/sitemap.php]Sitemap[/url]

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtbase-opensource-src in
Ubuntu.
https://bugs.launchpad.net/bugs/1509562

Title:
  no icons for menu, folders, directories, files

Status in dolphin package in Ubuntu:
  Confirmed
Status in kate package in Ubuntu:
  Confirmed
Status in kdepim package in Ubuntu:
  Confirmed
Status in konsole package in Ubuntu:
  Confirmed
Status in qtbase-opensource-src package in Ubuntu:
  Confirmed

Bug description:
  no icons for menu, folders, directories, files

  I am using Xubuntu 15.10 as the Guest in Virtualbox 5.0.8 r103449.
  This happened after a recent Xubuntu update.

  Info:
  $ apt-cache policy dolphin
  dolphin:
Installed: 4:15.08.2-0ubuntu1
Candidate: 4:15.08.2-0ubuntu1
Version table:
   *** 4:15.08.2-0ubuntu1 0
  500 http://mirror.cogentco.com/pub/linux/ubuntu/ wily/universe amd64 
Packages
  100 /var/lib/dpkg/status

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: dolphin 4:15.08.2-0ubuntu1
  ProcVersionSignature: Ubuntu 4.2.0-16.19-generic 4.2.3
  Uname: Linux 4.2.0-16-generic x86_64
  ApportVersion: 2.19.1-0ubuntu3
  Architecture: amd64
  Date: Fri Oct 23 17:35:08 2015
  InstallationDate: Installed on 2015-06-01 (144 days ago)
  InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150521)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: dolphin
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dolphin/+bug/1509562/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1509562] Re: no icons for menu, folders, directories, files

2016-08-26 Thread sheny

[url=http://www.iub.edu.pk/about_me.php]Cheap Pandora[/url]
[url=http://www.iub.edu.pk/Events.php]Wholesale Pandora charms[/url]
[url=http://www.iub.edu.pk/fashion.php]cheap Pandora Charms[/url]
[url=http://www.iub.edu.pk/help.php]Pandora Charms cheap[/url]
[url=http://www.iub.edu.pk/info.php]Pandora Jewelry[/url]
[url=http://www.iub.edu.pk/iubdns.php]Wholesale Pandora[/url]
[url=http://www.cheapjewe11erystore.com/]Cheap Pandora Store[/url]
[url=http://www.cheapjewe11erystore.com/sitemap.php]Sitemap[/url]

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtbase-opensource-src in
Ubuntu.
https://bugs.launchpad.net/bugs/1509562

Title:
  no icons for menu, folders, directories, files

Status in dolphin package in Ubuntu:
  Confirmed
Status in kate package in Ubuntu:
  Confirmed
Status in kdepim package in Ubuntu:
  Confirmed
Status in konsole package in Ubuntu:
  Confirmed
Status in qtbase-opensource-src package in Ubuntu:
  Confirmed

Bug description:
  no icons for menu, folders, directories, files

  I am using Xubuntu 15.10 as the Guest in Virtualbox 5.0.8 r103449.
  This happened after a recent Xubuntu update.

  Info:
  $ apt-cache policy dolphin
  dolphin:
Installed: 4:15.08.2-0ubuntu1
Candidate: 4:15.08.2-0ubuntu1
Version table:
   *** 4:15.08.2-0ubuntu1 0
  500 http://mirror.cogentco.com/pub/linux/ubuntu/ wily/universe amd64 
Packages
  100 /var/lib/dpkg/status

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: dolphin 4:15.08.2-0ubuntu1
  ProcVersionSignature: Ubuntu 4.2.0-16.19-generic 4.2.3
  Uname: Linux 4.2.0-16-generic x86_64
  ApportVersion: 2.19.1-0ubuntu3
  Architecture: amd64
  Date: Fri Oct 23 17:35:08 2015
  InstallationDate: Installed on 2015-06-01 (144 days ago)
  InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150521)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: dolphin
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dolphin/+bug/1509562/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1600000] Re: libnss-resolve treats two trailing dots on a domain name incorrectly

2016-08-26 Thread Adam Conrad

** Also affects: systemd via
   https://github.com/systemd/systemd/issues/3978
   Importance: Unknown
   Status: Unknown

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/160

Title:
  libnss-resolve treats two trailing dots on a domain name incorrectly

Status in systemd:
  Unknown
Status in systemd package in Ubuntu:
  Triaged

Bug description:
  (base)adconrad@nosferatu:~$ getent ahostsv4 www.gnu.org..
  208.118.235.148 STREAM wildebeest.gnu.org
  208.118.235.148 DGRAM  
  208.118.235.148 RAW
  (base)adconrad@nosferatu:~$ sudo sed -i -e 's/ resolve dns/ dns/' 
/etc/nsswitch.conf 
  (base)adconrad@nosferatu:~$ getent ahostsv4 www.gnu.org..
  (base)adconrad@nosferatu:~$ sudo sed -i -e 's/ dns/ resolve dns/' 
/etc/nsswitch.conf 
  (base)adconrad@nosferatu:~$ getent ahostsv4 www.gnu.org..
  208.118.235.148 STREAM wildebeest.gnu.org
  208.118.235.148 DGRAM  
  208.118.235.148 RAW
  (base)adconrad@nosferatu:~$ 

  This is responsible for the new regression in glibc:

  --
  FAIL: posix/tst-getaddrinfo5
  original exit status 1
  resolving "localhost." worked, proceeding to test
  resolving "localhost.." failed, test passed
  resolving "www.gnu.org." worked, proceeding to test
  resolving "www.gnu.org.." worked, test failed
  --

To manage notifications about this bug go to:
https://bugs.launchpad.net/systemd/+bug/160/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1617512] [NEW] x-systemd.automount causes system to fail to boot

2016-08-26 Thread Nazar Mokrynskyi

Public bug reported:

I've changed /etc/fstab mount line from:
UUID=78fc6e4d-9a37-406d-9bde-449fd8595373 /media/Data ext4 relatime 0 1
to:
UUID=78fc6e4d-9a37-406d-9bde-449fd8595373 /media/Data ext4 
noauto,x-systemd.automount,relatime 0 1

Now system fails to boot, in logs I see:
systemd[1]: Starting of media-Data.automount not supported.
systemd[1]: Dependency failed for Local File Systems.
systemd[1]: local-fs.target: Job local-fs.target/start failed with result 
'dependency'.
systemd[1]: local-fs.target: Triggering OnFailure= dependencies.
systemd[1]: Started Emergency Shell.
systemd[1]: Reached target Emergency Mode.

While according to
http://manpages.ubuntu.com/manpages/xenial/man5/systemd.mount.5.html it
should work.

I'm on Xenial as of today.

** Affects: systemd (Ubuntu)
 Importance: Undecided
 Status: New

** Description changed:

  I've changed /etc/fstab mount line from:
  UUID=78fc6e4d-9a37-406d-9bde-449fd8595373 /media/Data ext4 relatime 0 1
  to:
  UUID=78fc6e4d-9a37-406d-9bde-449fd8595373 /media/Data ext4 
noauto,x-systemd.automount,relatime 0 1
  
  Now system fails to boot, in logs I see:
  systemd[1]: Starting of media-Data.automount not supported.
  systemd[1]: Dependency failed for Local File Systems.
  systemd[1]: local-fs.target: Job local-fs.target/start failed with result 
'dependency'.
  systemd[1]: local-fs.target: Triggering OnFailure= dependencies.
  systemd[1]: Started Emergency Shell.
  systemd[1]: Reached target Emergency Mode.
  
  While according to
  http://manpages.ubuntu.com/manpages/xenial/man5/systemd.mount.5.html it
  should work.
+ 
+ I'm on Xenial as of today.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1617512

Title:
  x-systemd.automount causes system to fail to boot

Status in systemd package in Ubuntu:
  New

Bug description:
  I've changed /etc/fstab mount line from:
  UUID=78fc6e4d-9a37-406d-9bde-449fd8595373 /media/Data ext4 relatime 0 1
  to:
  UUID=78fc6e4d-9a37-406d-9bde-449fd8595373 /media/Data ext4 
noauto,x-systemd.automount,relatime 0 1

  Now system fails to boot, in logs I see:
  systemd[1]: Starting of media-Data.automount not supported.
  systemd[1]: Dependency failed for Local File Systems.
  systemd[1]: local-fs.target: Job local-fs.target/start failed with result 
'dependency'.
  systemd[1]: local-fs.target: Triggering OnFailure= dependencies.
  systemd[1]: Started Emergency Shell.
  systemd[1]: Reached target Emergency Mode.

  While according to
  http://manpages.ubuntu.com/manpages/xenial/man5/systemd.mount.5.html
  it should work.

  I'm on Xenial as of today.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1617512/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1617507] Re: je ne sais rien

2016-08-26 Thread Seth Arnold

Thanks for taking the time to report this bug and helping to make Ubuntu
better. We appreciate the difficulties you are facing, but this appears
to be a "regular" (non-security) bug.  I have unmarked it as a security
issue since this bug does not show evidence of allowing attackers to
cross privilege boundaries nor directly cause loss of data/privacy.
Please feel free to report any other bugs you may find.

** Information type changed from Private Security to Public

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1617507

Title:
  je ne sais rien

Status in xorg package in Ubuntu:
  New

Bug description:
  Merci

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-34.53-generic 4.4.15
  Uname: Linux 4.4.0-34-generic x86_64
  .tmp.unity_support_test.0:
   
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  BootLog:
   
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Sat Aug 27 04:03:12 2016
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  GraphicsCard:
   Intel Corporation 4 Series Chipset Integrated Graphics Controller 
[8086:2e12] (rev 03) (prog-if 00 [VGA controller])
 Subsystem: Hewlett-Packard Company 4 Series Chipset Integrated Graphics 
Controller [103c:3035]
 Subsystem: Hewlett-Packard Company 4 Series Chipset Integrated Graphics 
Controller [103c:3035]
  InstallationDate: Installed on 2016-08-26 (0 days ago)
  InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  MachineType: Hewlett-Packard HP Compaq dc7900 Convertible Minitower
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic 
root=UUID=3d13a30f-9f43-414f-9cc8-a627d0a04a2d ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/12/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 786G1 v01.26
  dmi.board.asset.tag: CAC911087W
  dmi.board.name: 3032h
  dmi.board.vendor: Hewlett-Packard
  dmi.chassis.asset.tag: CAC911087W
  dmi.chassis.type: 6
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr786G1v01.26:bd07/12/2011:svnHewlett-Packard:pnHPCompaqdc7900ConvertibleMinitower:pvr:rvnHewlett-Packard:rn3032h:rvr:cvnHewlett-Packard:ct6:cvr:
  dmi.product.name: HP Compaq dc7900 Convertible Minitower
  dmi.sys.vendor: Hewlett-Packard
  version.compiz: compiz 1:0.9.12.2+16.04.20160801.3-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.67-1ubuntu0.16.04.2
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2.1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2.1
  version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2.3
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.12-1build2
  xserver.bootTime: Sat Aug 27 03:59:44 2016
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   
  xserver.version: 2:1.18.3-1ubuntu2.3

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1617507/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1616548] Re: Cups causes LibreOffice unittests to loop in a sbuild

2016-08-26 Thread Till Kamppeter

** Also affects: sbuild (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: sbuild (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1616548

Title:
  Cups causes LibreOffice unittests to loop in a sbuild

Status in cups package in Ubuntu:
  Incomplete
Status in sbuild package in Ubuntu:
  Incomplete

Bug description:
  When building LibreOffice 1:5.2.0-0ubuntu1 on a xenial host with a
  yakkety sbuild, e.g. by:

  sbuild -A -d yakkety-amd64 (...).dsc

  this loops/busy hangs with unittests. This was working ok up to
  5.2.0~rc4 (=final), it is a regression by a LibreOffice dependency,
  most likely CUPS, which was updated.

  I tried to inject debug symbols by running with a: --chroot-setup-
  command and then run something along the lines of:

   apt install cups
   wget http://launchpadlibrarian.net/278966811/cups-dbgsym_2.2~rc1-4_amd64.ddeb
   wget 
http://launchpadlibrarian.net/278966816/libcups2-dbgsym_2.2~rc1-4_amd64.ddeb
   dpkg -i cups-dbgsym_2.2~rc1-4_amd64.ddeb
   dpkg -i libcups2-dbgsym_2.2~rc1-4_amd64.ddeb

  before starting the build proper, but I got only marginally better
  debug info. The hanging LibreOffice test processes usually have 2-4
  child processes. The parent and one of the childs are busy, while the
  rest idle.

  Here is a stacktrace of the busy child:

  Program received signal SIGPIPE, Broken pipe.
  0x2b0a80dd615f in fgetspent (stream=0x11) at fgetspent.c:43
  43in fgetspent.c
  (gdb) bt
  #0  0x2b0a80dd615f in fgetspent (stream=0x11) at fgetspent.c:43
  #1  0x001e in ?? ()
  #2  0x55c4976981e0 in ?? ()
  #3  0x2b0a8aff8d20 in ipp_options () from 
/usr/lib/x86_64-linux-gnu/libcups.so.2
  #4  0x4002 in ?? ()
  #5  0x2b0a8ada9feb in ppdCollect2 (ppd=0x2b0a8ada9bdf 
, section=29, min_order=0, choices=0x2b0a8adad6f3 
) at emit.c:145
  #6  0x in ?? ()

  Here is a stacktrace of the busy parent:

  Thread 3 "CUPSManager cup" received signal SIGPIPE, Broken pipe.
  0x2b0a80dd615f in fgetspent (stream=0x11) at fgetspent.c:43
  43in fgetspent.c
  (gdb) bt
  #0  0x2b0a80dd615f in fgetspent (stream=0x11) at fgetspent.c:43
  #1  0x001e in ?? ()
  #2  0x55c4976981e0 in ?? ()
  #3  0x2b0a8aff8d20 in ipp_options () from 
/usr/lib/x86_64-linux-gnu/libcups.so.2
  #4  0x4002 in ?? ()
  #5  0x2b0a8ada9feb in ppdCollect2 (ppd=0x2b0a8ada9bdf 
, section=29, min_order=0, choices=0x2b0a8adad6f3 
) at emit.c:145
  #6  0x in ?? ()

  
  When pressing "c" in gdb to continue, both processes stop very quickly again 
with the SIGPIPE.
  Venturing a guess: Is the signal handling of CUPS b0rked? As fgetspent reads 
the shadow file[1], maybe there are missing permissions or other sandbox issues 
that CUPS doesnt handle error cases for properly?

  [1] http://linux.die.net/man/3/fgetspent

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1616548/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1613001] Re: mouse cursor flashing after adding third monitor through usb 3.0 displaylink monitor

** Changed in: xorg (Ubuntu)
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1613001

Title:
  mouse cursor flashing after adding third monitor through usb 3.0
  displaylink monitor

Status in xorg package in Ubuntu:
  Confirmed

Bug description:
  
  Ubuntu 16.04 LTS, i7-3630QM, Intel HD Graphics 4000

  LVDS1 primary is Samsung NP350 laptop monitor
  HDMI1 is HDMI monitor
  DVI-I-1 is through USB 3.0 displaylink to HDMI/DVI/Eth adapter, 
idVendor=17e9, idProduct=4307, monitor connected via HDMI

  Mouse cursor constantly flashing on HDMI1 (sometimes clicking at empty
  area stops flashing, but mouse/keyboard action in a field with
  editable cursor like a web form triggers flashing), occasionally on
  LVDS1 but never on DVI-I-1

  
  $ xrandr
  Screen 0: minimum 8 x 8, current 5440 x 1080, maximum 32767 x 32767
  LVDS1 connected primary 1600x900+3840+0 (normal left inverted right x axis y 
axis) 380mm x 210mm
 1600x900  60.06*+
 1440x900  59.89  
 1368x768  60.00  
 1360x768  59.8059.96  
 1152x864  60.00  
 1280x720  60.00  
 1024x768  60.00  
 1024x576  60.00  
 960x540   60.00  
 800x600   60.3256.25  
 864x486   60.00  
 800x450   60.00  
 640x480   59.94  
 720x405   60.00  
 640x360   60.00  
  DP1 disconnected (normal left inverted right x axis y axis)
  HDMI1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 
600mm x 340mm
 1920x1080 60.00*+  50.0059.94  
 1920x1080i60.0050.0059.94  
 1680x1050 59.88  
 1280x1024 75.0260.02  
 1440x900  59.90  
 1280x960  60.00  
 1152x864  75.00  
 1280x720  60.0050.0059.94  
 1440x576  50.00  
 1024x768  75.0870.0760.00  
 1440x480  60.0059.94  
 832x624   74.55  
 800x600   72.1975.0060.3256.25  
 720x576   50.00  
 720x480   60.0059.94  
 640x480   75.0066.6760.0059.94  
 720x400   70.08  
  VGA1 disconnected (normal left inverted right x axis y axis)
  VIRTUAL1 disconnected (normal left inverted right x axis y axis)
  DVI-I-1 connected 1920x1080+0+0 598mm x 336mm
 1920x1080 60.00*+  50.0059.94  
 1680x1050 59.88  
 1600x900  60.00  
 1280x1024 75.0260.02  
 1280x960  60.00  
 1280x800  59.91  
 1152x864  75.00  
 1280x720  60.0050.0059.94  
 1024x768  75.0860.00  
 1024x576  59.97  
 832x624   74.55  
 800x600   75.0060.3256.25  
 720x576   50.00  
 848x480   60.00  
 720x480   60.0059.94  
 640x480   75.0060.0059.94  
 720x400   70.08  
1920x1080 (0xf7) 148.500MHz +HSync +VSync
  h: width  1920 start 2008 end 2052 total 2200 skew0 clock  
67.50KHz
  v: height 1080 start 1084 end 1089 total 1125   clock  60.00Hz
1920x1080 (0xf8) 148.500MHz +HSync +VSync
  h: width  1920 start 2448 end 2492 total 2640 skew0 clock  
56.25KHz
  v: height 1080 start 1084 end 1089 total 1125   clock  50.00Hz
1920x1080 (0xf9) 148.352MHz +HSync +VSync
  h: width  1920 start 2008 end 2052 total 2200 skew0 clock  
67.43KHz
  v: height 1080 start 1084 end 1089 total 1125   clock  59.94Hz
1680x1050 (0xfd) 119.000MHz +HSync -VSync
  h: width  1680 start 1728 end 1760 total 1840 skew0 clock  
64.67KHz
  v: height 1050 start 1053 end 1059 total 1080   clock  59.88Hz
1280x1024 (0xfe) 135.000MHz +HSync +VSync
  h: width  1280 start 1296 end 1440 total 1688 skew0 clock  
79.98KHz
  v: height 1024 start 1025 end 1028 total 1066   clock  75.02Hz
1280x1024 (0xff) 108.000MHz +HSync +VSync
  h: width  1280 start 1328 end 1440 total 1688 skew0 clock  
63.98KHz
  v: height 1024 start 1025 end 1028 total 1066   clock  60.02Hz
1280x960 (0x100) 108.000MHz +HSync +VSync
  h: width  1280 start 1376 end 1488 total 1800 skew0 clock  
60.00KHz
  v: height  960 start  961 end  964 total 1000   clock  60.00Hz
1152x864 (0x101) 108.000MHz +HSync +VSync
  h: width  1152 start 1216 end 1344 total 1600 skew0 clock  
67.50KHz
  v: height  864 start  865 end  868 total  900   clock  75.00Hz
1280x720 (0x102) 74.250MHz +HSync +VSync
  h: width  1280 start 1390 end 1430 total 1650 skew0 clock  
45.00KHz
  v: height  720 start  725 end  730 total  750   clock  60.00Hz
1280x720 (0x103) 74.250MHz +HSync +VSync
  h: width  1280 start 1720 end 1760 total 1980

Re: [Touch-packages] [Bug 1611327] Re: Disabled ListItem inside ListView takes focus but does not show focus ring

Yes

On Fri, Aug 26, 2016 at 1:05 PM, Zsombor Egri <1611...@bugs.launchpad.net>
wrote:

> @Tim, @Femma: I guess you meant to scroll to the next enabled/disabled
> item one by one, right?
>
> --
> You received this bug notification because you are a bug assignee.
> https://bugs.launchpad.net/bugs/1611327
>
> Title:
>   Disabled ListItem inside ListView takes focus but does not show focus
>   ring
>
> Status in Ubuntu UX:
>   Fix Committed
> Status in ubuntu-ui-toolkit package in Ubuntu:
>   In Progress
>
> Bug description:
>   Items outside of a ListView are skipped when using keyboard navigation
>   to change the focus. However, a ListItem inside a ListView takes the
>   focus even when it is disabled, but it does not show the focus frame
>   when focused.
>
>   For example, execute this QML program:
>
>   import QtQuick 2.4
>   import Ubuntu.Components 1.3
>
>   Item {
>   width: units.gu(50)
>   height: units.gu(50)
>
>   ListView {
>   anchors.fill: parent
>   delegate: ListItem {
>   enabled: index != 2
>   Label {
>   anchors.centerIn: parent
>   text: parent.enabled ? "enabled" : "disabled"
>   }
>   }
>   model: 5
>   }
>   }
>
>   Press TAB to focus on the ListView. Then press the down-cursor-key
>   twice to move the focus down inside the ListView. The focus will be on
>   the disabled item, but not focus frame is visible This is confusing
>   for the user since the focus seems to disappear, and the Item where
>   the focus seems to be (although invisible) cannot be triggered because
>   it is disabled.
>
>   Note: When fixing this bug, also test the solution for Horizontal
>   ListViews (and RightToLeft and BottomToTop directions), since I
>   encountered this bug in the scrolling toolbar (in progress) that has a
>   Horizontal, RightToLeft ListView.
>
>   ==UX Fix===
>
>   Bypass focus for a disabled item and show focus immediately for the
>   next available enabled item.
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/ubuntu-ux/+bug/1611327/+subscriptions
>


-- 
Femma Ashraf
UX Design Lead
Product Strategy | Apps | London, UK
Ubuntu.com  | Canonical.com

Mobile +44 (0) 7855 528 657

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1611327

Title:
  Disabled ListItem inside ListView takes focus but does not show focus
  ring

Status in Ubuntu UX:
  Fix Committed
Status in ubuntu-ui-toolkit package in Ubuntu:
  In Progress

Bug description:
  Items outside of a ListView are skipped when using keyboard navigation
  to change the focus. However, a ListItem inside a ListView takes the
  focus even when it is disabled, but it does not show the focus frame
  when focused.

  For example, execute this QML program:

  import QtQuick 2.4
  import Ubuntu.Components 1.3

  Item {
  width: units.gu(50)
  height: units.gu(50)

  ListView {
  anchors.fill: parent
  delegate: ListItem {
  enabled: index != 2
  Label {
  anchors.centerIn: parent
  text: parent.enabled ? "enabled" : "disabled"
  }
  }
  model: 5
  }
  }

  Press TAB to focus on the ListView. Then press the down-cursor-key
  twice to move the focus down inside the ListView. The focus will be on
  the disabled item, but not focus frame is visible This is confusing
  for the user since the focus seems to disappear, and the Item where
  the focus seems to be (although invisible) cannot be triggered because
  it is disabled.

  Note: When fixing this bug, also test the solution for Horizontal
  ListViews (and RightToLeft and BottomToTop directions), since I
  encountered this bug in the scrolling toolbar (in progress) that has a
  Horizontal, RightToLeft ListView.

  ==UX Fix===

  Bypass focus for a disabled item and show focus immediately for the
  next available enabled item.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1611327/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1615751] Re: ROOTDELAY= causes unnecessary delay in boot

This bug was fixed in the package initramfs-tools - 0.125ubuntu3

---
initramfs-tools (0.125ubuntu3) yakkety; urgency=medium

  * init: Revert Debian commit ab91306. Interpreting "rootdelay" as a static
sleep is complete nonsense. (LP: #1615751)
  * scripts/local: Let rootdelay determine the wait-for-root timeout instead
of the shell polling loop that comes after it, as we should never hit the
latter in Ubuntu (where we require udev everywhere). Thanks to Scott Moser
for this patch!

 -- Martin Pitt   Fri, 26 Aug 2016 12:54:37
+0200

** Changed in: initramfs-tools (Ubuntu Yakkety)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1615751

Title:
  ROOTDELAY= causes unnecessary delay in boot

Status in cloud-images:
  Fix Committed
Status in initramfs-tools package in Ubuntu:
  Fix Released
Status in initramfs-tools source package in Yakkety:
  Fix Released

Bug description:
  I launched 2 different yakkety systems on azure instance types:
    Basic_A0
    Standard_D1_v2
  More information what those things are at :
    https://azure.microsoft.com/en-us/pricing/details/virtual-machines/linux/

  systemd-analize says:

  ## Basic A0
  smoser@sm-y-d1v2-1:~$ systemd-analyze
  Startup finished in 5min 8.172s (kernel) + 42.670s (userspace) = 5min 50.842s

  ## Standard D1 v2
  $ systemd-analyze
  Startup finished in 5min 13.347s (kernel) + 1min 31.532s (userspace) = 6min 
44.879s

  Systemd thinks that more than 5 minutes passed between the kernel
  being loaded and /sbin/init being run.  I'm pretty sure this isn't
  just a bad clock, as the system actually is not reachable for
  something like 6 minutes after boot, so it seems sane.  Additionally,
  I have some scripts that compare launch time and code ran inside the
  vm via cloud-init and they agree.

  For example:
    starting at Mon, 22 Aug 2016 15:37:43 +
    uptime: 349.77 seconds
    you launched me at: Mon, 22 Aug 2016 15:30:11 +
    it is now : Mon, 22 Aug 2016 15:37:43 +
    kernel booted : Mon, 22 Aug 2016 15:31:54 +
    launch to kernel boot: 103 seconds
    launch to user-data  : 452   seconds

  The full dmesg is attached, but interesting bits are
  [0.815692] Trying to unpack rootfs image as initramfs...
  [1.289093] Freeing initrd memory: 35660K (88001d47d000 - 
88001f75)
  ...
  [7.820798] input: TPPS/2 IBM TrackPoint as 
/devices/platform/i8042/serio1/input/input3
  [7.834419] input: AT Translated Set 2 keyboard as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/VMBUS:01/vmbus_5/serio2/input/input5
  [   72.464227] random: nonblocking pool is initialized
  [  305.527657] Btrfs loaded
  [  305.628091] blk_update_request: I/O error, dev fd0, sector 0
  [  305.632007] floppy: error -5 while reading block 0
  [  306.027898] EXT4-fs (sda1): mounted filesystem with ordered data mode. 
Opts: (null)
  [  308.901437] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT 
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS 
+ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  [  308.925746] systemd[1]: Detected virtualization microsoft.
  [  308.933658] systemd[1]: Detected architecture x86-64.
  [  308.999041] systemd[1]: Set hostname to .
  ...

  ProblemType: Bug
  DistroRelease: Ubuntu 16.10
  Package: linux-image-4.4.0-34-generic 4.4.0-34.53
  ProcVersionSignature: User Name 4.4.0-34.53-generic 4.4.15
  Uname: Linux 4.4.0-34-generic x86_64
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Aug 22 15:37 seq
   crw-rw 1 root audio 116, 33 Aug 22 15:37 timer
  AplayDevices: Error: [Errno 2] No such file or directory: 'aplay'
  ApportVersion: 2.20.3-0ubuntu7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord'
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  Date: Mon Aug 22 17:31:18 2016
  IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig'
  Lsusb: Error: command ['lsusb'] failed with exit code 1:
  MachineType: Microsoft Corporation Virtual Machine
  PciMultimedia:

  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 hyperv_fb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic 
root=UUID=314ea127-227e-4b64-b5b4-d70ab0fb7eb7 ro console=tty1 console=ttyS0 
earlyprintk=ttyS0 rootdelay=300
  RelatedPackageVersions:
   linux-restricted-modules-4.4.0-34-generic N/A
   linux-backports-modules-4.4.0-34-generic  N/A
   linux-firmware1.160
  RfKill: Error: [Errno 2] No such file or directory: 'rfkill'
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)

[Touch-packages] [Bug 1616437] Re: FFE: split out libiptc library

This bug was fixed in the package iptables - 1.6.0-3ubuntu1

---
iptables (1.6.0-3ubuntu1) yakkety; urgency=medium

  * Merge with Debian (LP: #1616437); remaining Ubuntu changes:
- debian/control: add linuxdoc-tools dep
- 9000-howtos.patch: add howtos/ and install them
- 9002-libxt_recent-Add-support-for-reap-option.patch: Some changes are
  upstream, patch needed for additional reap option checks.
- debian/iptables-dev.doc-base.netfilter-extensions,
  debian/iptables-dev.doc-base.netfilter-hacking,
  debian/iptables.doc-base.nat, debian/iptables.doc-base.packet-filter:
  add howtos

iptables (1.6.0-3) unstable; urgency=medium

  * several changes in this release. To put it short: split packages into
libiptc, libip4tc, lipip6tc and libxtables-dev, so we no longer require
the old iptables-dev binary package.
.
Also, give to all binary packages Multi-Arch support.
.
Another important thing: move libs from /lib to /usr/lib
.
Now follows almost all the commits:
.
  [ Arturo Borrero Gonzalez ]
  * [2a142cc] libxtables11: Section is libs instead of net (Closes:
#812973)
  * [637406a] iptables: make it Multi-Arch: foreign (Closes: #776041)
  * [4486e87] iptables,iptables-nftables-compat: Suggests kmod (Closes:
#623865)
  * [e687ad9] manpages: fix typo in manpages (ip6tables-resotre) (Closes:
#793299)
  * [4b6ae2e] manpages: add xtables-compat.8
  * [1777193] d/control: bump standars to 3.9.7
  * [bf21537] d/rules: disable libipq
  * [9658f74] debian/: finish Multi-Arch support and migrate from /lib to
/usr/lib
  * [1187751] d/rules: drop override_dh_shlibdeps
  * [246d62f] d/: package split: libiptc and libiptc-dev
  * [56803ca] d/iptables-dev.install: don't ship ip_qeue include
  * [a837415] d/: create libxtables-dev binary package (replacing
iptables-dev)
  * [ceda689] d/control: bump replaces, breaks and conflicts
  * [2436692] d/control: create iptables-dev as a transitional dummy package
  * [df1759c] d/control: relax Replaces & Breaks from lib packages to iptables
  * [35d0fa9] d/control: libxtables11 is also of Multi-Arch: same
  * [d17226d] d/control: library binary packages are of priority optional
  * [80ee5d2] d/control: iptables-dev doesn't require to Depends on lib packages
  * [2200348] d/: wrap-and-sort

  [ Michael Biebl ]
  * [47e0872] d/: complete libiptc packages split

 -- Martin Pitt   Fri, 26 Aug 2016 12:32:56
+0200

** Changed in: iptables (Ubuntu)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to iptables in Ubuntu.
https://bugs.launchpad.net/bugs/1616437

Title:
  FFE: split out libiptc library

Status in iptables package in Ubuntu:
  Fix Released

Bug description:
  I would like to get iptables merged from sid. 1.6.0-3
  (https://tracker.debian.org/news/788344) split out the libiptc library
  so that it doesn't drag in the full 4 MB of "iptables". With this we
  can finally enable libiptc support in systemd [1] so that nspawn
  containers with a private network will finally have working network
  (this needs to set up masquerading).

  For iptables this is just a package split without actual new features.
  For systemd this only affects nspawn (and there it is a bug fix as it
  unbreaks the default machinectl configuration and nspawn with -n), not
  LXC/LXD or other container solutions. So overall this is a low-risk
  change. But without the package split we would enlarge the base system
  by ~ 4 MB.

  Note: My main concern is to keep the systemd package in sync with
  Debian. Disabling iptc support in Ubuntu would be the only (and
  annoying) packaging delta.

  [1] https://anonscm.debian.org/cgit/pkg-
  systemd/systemd.git/commit/?id=26187cfaa

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/iptables/+bug/1616437/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1614215] Re: "md5sums differ" message seems to indicate an install problem

** Changed in: apparmor (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apparmor in Ubuntu.
https://bugs.launchpad.net/bugs/1614215

Title:
  "md5sums differ" message seems to indicate an install problem

Status in AppArmor:
  Confirmed
Status in Ubuntu GNOME:
  Confirmed
Status in apparmor package in Ubuntu:
  Confirmed

Bug description:
  Upon applying the latest Ubuntu routine-update, I observed these
  messages:

  Setting up apparmor (2.10.95-0ubuntu2.2) ...
  Installing new version of config file 
/etc/apparmor.d/abstractions/dbus-session-strict ...
  update-rc.d: warning: start and stop actions are no longer supported; falling 
back to defaults
  Skipping profile in /etc/apparmor.d/disable: usr.sbin.apache2
  Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
  Files /var/lib/dpkg/info/apparmor.md5sums and 
/var/lib/apparmor/profiles/.apparmor.md5sums differ

  "The reason why I am filing a bug report" is the LAST line.  I presume
  that if md5sums do not agree, something was probably done improperly
  in preparing this particular software-update blast.

  However, in-passing, I would also point out line #3, about "start and
  stop actions no longer supported." That seems to me to be something
  (of much less importance, obviously) that might have been overlooked.
  (I've seen =that= message for some time now.)

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: apparmor 2.10.95-0ubuntu2.2
  ProcVersionSignature: Ubuntu 4.4.0-34.53-generic 4.4.15
  Uname: Linux 4.4.0-34-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  Date: Wed Aug 17 14:22:55 2016
  InstallationDate: Installed on 2016-03-02 (168 days ago)
  InstallationMedia: Ubuntu-Server 15.10 "Wily Werewolf" - Release amd64 
(20151021)
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdline: BOOT_IMAGE=/vmlinuz-4.4.0-34-generic 
root=/dev/mapper/hostname--vg-root ro
  SourcePackage: apparmor
  Syslog:
   Aug 10 10:36:07 IntersignVM dbus[1638]: [system] AppArmor D-Bus mediation is 
enabled
   Aug 11 13:10:08 IntersignVM dbus[1655]: [system] AppArmor D-Bus mediation is 
enabled
   Aug 16 08:40:24 IntersignVM dbus[1693]: [system] AppArmor D-Bus mediation is 
enabled
   Aug 17 13:58:37 IntersignVM dbus[1657]: [system] AppArmor D-Bus mediation is 
enabled
  UpgradeStatus: Upgraded to xenial on 2016-05-11 (98 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/apparmor/+bug/1614215/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1617297] [NEW] [windowed mode] camera app buttons wrong rotation

2016-08-26 Thread Victor gonzalez

Public bug reported:

Enviroment:

current build number: 175
device name: frieza
channel: ubuntu-touch/rc-proposed/bq-aquaris-pd.en
last update: 2016-08-26 12:27:57
version version: 175
version ubuntu: 20160826
version device: 20160809.0
version custom: 20160805--42-20-vivid

Product: BQ M10 FHD

Steps to reproduce:

1º Switch to desktop mode when in landscape
2º Open camera app
3º Maximize it
4º Minimize it
5º Check camera app buttons change from landscape to portrait mode

Current result: Camera app buttons change from landscape to portrait mode when 
maximize/minimize windows
Expected result: Camera app buttons should only rotate when device rotates

Additional info: if you are not able to reproduce it that way, rotate
Frieza few times when in desktop mode and minimize/maximize the window.
Video attached

Logs time stamp: 14:13

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

** Attachment added: "logs+video.zip"
   
https://bugs.launchpad.net/bugs/1617297/+attachment/4728309/+files/logs+video.zip

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1617297

Title:
  [windowed mode] camera app buttons wrong rotation

Status in unity8 package in Ubuntu:
  New

Bug description:
  Enviroment:

  current build number: 175
  device name: frieza
  channel: ubuntu-touch/rc-proposed/bq-aquaris-pd.en
  last update: 2016-08-26 12:27:57
  version version: 175
  version ubuntu: 20160826
  version device: 20160809.0
  version custom: 20160805--42-20-vivid

  Product: BQ M10 FHD

  Steps to reproduce:

  1º Switch to desktop mode when in landscape
  2º Open camera app
  3º Maximize it
  4º Minimize it
  5º Check camera app buttons change from landscape to portrait mode

  Current result: Camera app buttons change from landscape to portrait mode 
when maximize/minimize windows
  Expected result: Camera app buttons should only rotate when device rotates

  Additional info: if you are not able to reproduce it that way, rotate
  Frieza few times when in desktop mode and minimize/maximize the
  window. Video attached

  Logs time stamp: 14:13

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1617297/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1616868] Re: Scrollbar thumb shows as hovered after touch release

2016-08-26 Thread Andrea Bernabei

** Changed in: ubuntu-ui-toolkit (Ubuntu)
   Status: Triaged => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1616868

Title:
  Scrollbar thumb shows as hovered after touch release

Status in Canonical System Image:
  New
Status in ubuntu-ui-toolkit package in Ubuntu:
  In Progress
Status in ubuntu-ui-toolkit package in Ubuntu RTM:
  New

Bug description:
  ubuntu-ui-toolkit r2079

  The fix to bug #1608897 created another issue.

  Since MouseArea does not get the exited() signal on touch release (to
  be investigated if that's intended), dragging the thumb with
  touchscreen and releasing while the finger is still inside the area of
  the thumb will cause the thumb to show as hovered even after release.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1616868/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1616926] Re: Scrollbar thumb shows as hovered after mouse is released outside the thumb

2016-08-26 Thread Andrea Bernabei

** Changed in: ubuntu-ui-toolkit (Ubuntu)
   Status: New => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1616926

Title:
  Scrollbar thumb shows as hovered after mouse is released outside the
  thumb

Status in Canonical System Image:
  New
Status in ubuntu-ui-toolkit package in Ubuntu:
  In Progress
Status in ubuntu-ui-toolkit package in Ubuntu RTM:
  New

Bug description:
  ubuntu-ui-toolkit r2079

  The fix to bug #1608897 created another issue.

  The code that checks if the thumb is being hovered currently only
  checks the y position of the input event, an optimization that worked
  well with the previous assumption that releasing mouse would always
  reset the hover state (but that was causing bug #1608897).

  There were, in fact, 2 cases before:
  - input device moves away (no pressed buttons) -> onExited is fired -> hover 
is reset
  - input device moves away while press-hold is in progress --> onRelease will 
reset hover

  Now that the behaviour changed and release does not reset the hover
  state, we obviously need to check both x and y position

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1616926/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1617300] [NEW] bash dies malloc: unknown:0: assertion botched

2016-08-26 Thread Stephen Baynes

Public bug reported:

Bash dies when scrolling up and down the history with:

malloc: unknown:0: assertion botched
free: called with unallocated block argument
last command: ...


ubuntu: "Ubuntu 14.04.5 LTS"
bash: 4.3-7ubuntu1.5

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: bash 4.3-7ubuntu1.5
ProcVersionSignature: Ubuntu 3.13.0-92.139-generic 3.13.11-ckt39
Uname: Linux 3.13.0-92-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.21
Architecture: amd64
CurrentDesktop: XFCE
Date: Fri Aug 26 13:21:50 2016
InstallationDate: Installed on 2013-08-21 (1101 days ago)
InstallationMedia: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 
(20130214)
SourcePackage: bash
UpgradeStatus: Upgraded to trusty on 2015-06-11 (441 days ago)

** Affects: bash (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug trusty

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1617300

Title:
  bash dies malloc: unknown:0: assertion botched

Status in bash package in Ubuntu:
  New

Bug description:
  Bash dies when scrolling up and down the history with:

  malloc: unknown:0: assertion botched
  free: called with unallocated block argument
  last command: ...


  ubuntu: "Ubuntu 14.04.5 LTS"
  bash: 4.3-7ubuntu1.5

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: bash 4.3-7ubuntu1.5
  ProcVersionSignature: Ubuntu 3.13.0-92.139-generic 3.13.11-ckt39
  Uname: Linux 3.13.0-92-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.21
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Fri Aug 26 13:21:50 2016
  InstallationDate: Installed on 2013-08-21 (1101 days ago)
  InstallationMedia: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 
(20130214)
  SourcePackage: bash
  UpgradeStatus: Upgraded to trusty on 2015-06-11 (441 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1617300/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1576698] Re: ntpdate-debian not working

2016-08-26 Thread Patrice

this bug is marked as fixed, but ntp_4.2.8p7 (or later) has not been
released on Xenial. So, it's not fixed at all.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ntp in Ubuntu.
https://bugs.launchpad.net/bugs/1576698

Title:
  ntpdate-debian not working

Status in NTP:
  Fix Released
Status in ntp package in Ubuntu:
  Triaged

Bug description:
  in 16.04 I get this
  # ntpdate-debian
  28 Apr 09:54:14 ntpdate[30747]: no servers can be used, exiting

  The problem is that ntpdate-debian parse  /etc/ntp.conf, searchin for the 
word "server",
  but the format of the file as changed a bit

  < server 0.ubuntu.pool.ntp.org
  < server 1.ubuntu.pool.ntp.org
  < server 2.ubuntu.pool.ntp.org
  < server 3.ubuntu.pool.ntp.org
  ---
  > pool 0.ubuntu.pool.ntp.org iburst
  > pool 1.ubuntu.pool.ntp.org iburst
  > pool 2.ubuntu.pool.ntp.org iburst
  > pool 3.ubuntu.pool.ntp.org iburst
  25c24
  < server ntp.ubuntu.com
  ---
  > pool ntp.ubuntu.com

  the word server as been replaced by "pool"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ntp/+bug/1576698/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1612309] Re: /usr/bin/unity8-dash:11:QMap:QNetworkManagerSettingsConnection::getSettings:QNetworkManagerEngine::disconnectFromId:QNetworkSessionPrivateImpl::stop:QNetworkAccessMa

2016-08-26 Thread Timo Jyrinki

This is ready in QA queue but not sure if they will select it for OTA-13
or not.

** Also affects: canonical-devices-system-image
   Importance: Undecided
   Status: New

** Changed in: qtbase-opensource-src (Ubuntu RTM)
   Status: New => In Progress

** Changed in: canonical-devices-system-image
 Assignee: (unassigned) => Zoltan Balogh (bzoltan)

** Changed in: canonical-devices-system-image
   Importance: Undecided => Medium

** Changed in: qtbase-opensource-src (Ubuntu RTM)
 Assignee: (unassigned) => Timo Jyrinki (timo-jyrinki)

** Changed in: qtbase-opensource-src (Ubuntu RTM)
   Importance: Undecided => Medium

** Changed in: canonical-devices-system-image
Milestone: None => 13

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtbase-opensource-src in
Ubuntu.
https://bugs.launchpad.net/bugs/1612309

Title:
  
/usr/bin/unity8-dash:11:QMap:QNetworkManagerSettingsConnection::getSettings:QNetworkManagerEngine::disconnectFromId:QNetworkSessionPrivateImpl::stop:QNetworkAccessManagerPrivate::_q_configurationChanged

Status in Canonical System Image:
  New
Status in qtbase-opensource-src package in Ubuntu:
  In Progress
Status in unity8 package in Ubuntu:
  Invalid
Status in qtbase-opensource-src package in Ubuntu RTM:
  In Progress

Bug description:
  The Ubuntu Error Tracker has been receiving reports about a problem
  regarding unity8.  This problem was most recently seen with version
  8.13+15.04.20160714-0ubuntu1, the problem page at
  https://errors.ubuntu.com/problem/3f133086a21b12e00de8c6ccd1773109ca7f8ff7
  contains more details.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1612309/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1576698] Re: ntpdate-debian not working

Hi Patrice,
there was a lot of work on many bugs going on which conflicted with this one.
Many where driven to debian and included in the last merge for yakkety and 
discussed one-by-one if they qualify for a Xenial backport.

This bug seems to have been forgotten in that discussion.
So to summarize it has in fact be fixed in yakkety by my merge being completed 
recently.
So far the bug status only reflects the linked debian bug is closed.

To flag correctly for now we have to mark ntp(ubuntu) as fix released as
well (by the merge) and add a task for xenial to consider the backport.

I'll do so and look in the backport effort shortly.


** Changed in: ntp (Ubuntu)
   Status: Triaged => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ntp in Ubuntu.
https://bugs.launchpad.net/bugs/1576698

Title:
  ntpdate-debian not working

Status in NTP:
  Fix Released
Status in ntp package in Ubuntu:
  Fix Released

Bug description:
  in 16.04 I get this
  # ntpdate-debian
  28 Apr 09:54:14 ntpdate[30747]: no servers can be used, exiting

  The problem is that ntpdate-debian parse  /etc/ntp.conf, searchin for the 
word "server",
  but the format of the file as changed a bit

  < server 0.ubuntu.pool.ntp.org
  < server 1.ubuntu.pool.ntp.org
  < server 2.ubuntu.pool.ntp.org
  < server 3.ubuntu.pool.ntp.org
  ---
  > pool 0.ubuntu.pool.ntp.org iburst
  > pool 1.ubuntu.pool.ntp.org iburst
  > pool 2.ubuntu.pool.ntp.org iburst
  > pool 3.ubuntu.pool.ntp.org iburst
  25c24
  < server ntp.ubuntu.com
  ---
  > pool ntp.ubuntu.com

  the word server as been replaced by "pool"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ntp/+bug/1576698/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1509562] Re: no icons for menu, folders, directories, files

2016-08-26 Thread Ben Bucksch

I saw this bug in Kate and in Gwenview (and probably other KDE apps). Most 
buttons had no icons at all for me. I had used Menta from MATE as icon theme.
The last comment fixed it. Particularly, selecting "Oxygen" as theme in "KDE 
system settings" (step 3 above) helped.

Ubuntu: Please fix this. Given that most buttons are icon-only, this bug 
seriously affects usability. 2 fixes are needed here:
a) Add all icons to all themes (reasonable expectation that I can install KDE 
apps in Mate and Gnome, and that all offered themes work)
b) There's already the concept of a fallback theme. Set dependencies / install 
scripts to ensure that the fallback theme contains all icons for all apps, 
including KDE apps.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtbase-opensource-src in
Ubuntu.
https://bugs.launchpad.net/bugs/1509562

Title:
  no icons for menu, folders, directories, files

Status in dolphin package in Ubuntu:
  Confirmed
Status in kate package in Ubuntu:
  Confirmed
Status in kdepim package in Ubuntu:
  Confirmed
Status in konsole package in Ubuntu:
  Confirmed
Status in qtbase-opensource-src package in Ubuntu:
  Confirmed

Bug description:
  no icons for menu, folders, directories, files

  I am using Xubuntu 15.10 as the Guest in Virtualbox 5.0.8 r103449.
  This happened after a recent Xubuntu update.

  Info:
  $ apt-cache policy dolphin
  dolphin:
Installed: 4:15.08.2-0ubuntu1
Candidate: 4:15.08.2-0ubuntu1
Version table:
   *** 4:15.08.2-0ubuntu1 0
  500 http://mirror.cogentco.com/pub/linux/ubuntu/ wily/universe amd64 
Packages
  100 /var/lib/dpkg/status

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: dolphin 4:15.08.2-0ubuntu1
  ProcVersionSignature: Ubuntu 4.2.0-16.19-generic 4.2.3
  Uname: Linux 4.2.0-16-generic x86_64
  ApportVersion: 2.19.1-0ubuntu3
  Architecture: amd64
  Date: Fri Oct 23 17:35:08 2015
  InstallationDate: Installed on 2015-06-01 (144 days ago)
  InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150521)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: dolphin
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dolphin/+bug/1509562/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1428775] Re: [SDK] On Long Press in the Text Area, Screen should be magnified to allow precise positioning

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Femma (femma)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1428775

Title:
  [SDK] On Long Press in the Text Area, Screen should be magnified to
  allow precise positioning

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in ubuntu-ui-toolkit package in Ubuntu:
  Triaged

Bug description:
  On long press, the user can drag the handle and the whole UI & text
  zooms in 1.5x to allow easier positioning of the handle.

  
https://www.dropbox.com/s/8wt10uf0pmzizrd/050315_Convergence%20-%20Text%20selection_gv.pdf?dl=0

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1428775/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1447395] Re: [browser] Zoom needed for better readability

** Changed in: ubuntu-ux
 Assignee: (unassigned) => James Mulholland (jamesmulholland)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1447395

Title:
  [browser] Zoom needed for better readability

Status in Canonical System Image:
  Fix Released
Status in Canonical Pocket Desktop:
  New
Status in Oxide:
  Fix Released
Status in Ubuntu UX:
  Triaged
Status in webbrowser-app package in Ubuntu:
  Fix Released

Bug description:
  Missing: Many people need a customizable zoom or at least text size
  for websites because they need bigger text (and pictures) for easy
  reading. The zoom should not result in horizontal scrolling but wrap
  text on the end of line.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1447395/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1445772] Re: Static ip configuration is not possible with touch gui

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Matthew Paul Thomas (mpt)

** Changed in: ubuntu-ux
   Status: New => Triaged

** Summary changed:

- Static ip configuration is not possible with touch gui
+ [System Settings] Static ip configuration is not possible with touch gui

** Changed in: ubuntu-ux
   Importance: Undecided => Wishlist

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-network in
Ubuntu.
https://bugs.launchpad.net/bugs/1445772

Title:
  [System Settings] Static ip configuration is not possible with touch
  gui

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in indicator-network package in Ubuntu:
  Confirmed
Status in ubuntu-system-settings package in Ubuntu:
  Confirmed

Bug description:
  I have received the bq Aquaris Ubuntu and it looks and works great, but the 
first impression is lowered by the missing ability to use a static ip 
configuration for WLAN.
  On the web I found a solution to set a static ip configuration, but this 
require a connection to the pc. This is not very helpful when you are on a 
trip. I think it is important that you can set a static ip configuration only 
with the touch gui.

  When you have connected to a WLAN you can look at the connection
  details and most of the screen is blank. I think this is a good place
  for an ip settings menu.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1445772/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1413284] Re: Terms 'Social' and 'IM' used interchangeably in address book

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Rae Shambrook (raecontreras)

** Changed in: ubuntu-ux
   Status: New => Triaged

** Changed in: ubuntu-ux
 Assignee: Rae Shambrook (raecontreras) => Femma (femma)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to address-book-app in
Ubuntu.
https://bugs.launchpad.net/bugs/1413284

Title:
  Terms 'Social' and 'IM' used interchangeably in address book

Status in Ubuntu UX:
  Triaged
Status in address-book-app package in Ubuntu:
  Confirmed

Bug description:
  Steps to reproduce:

  1. Open Contacts
  2. Create a new contact by swiping from the bottom edge
  3. Tap on Add Field
  4. Observe that there is an option called Social, tap on it
  5. A field is added titled 'IM' with the text 'Enter a social alias' and the 
type 'Skype'
  6. Enter something here and a First and Last name for the contact
  7. From the contact list tap on the new contact and tap on the view contact 
button
  8. Observe that there is a field with the name 'Social'
  9. Tap on the 'Edit' icon in the top-right corner
  10. Observe that there is a field with the name 'IM'

  Expected result:

  In steps 4,5,8 and 10 the term used should be the same

  Actual result:

  The term is different in 4 and 8 vs 5 and 10

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: address-book-app 0.2+15.04.20150120-0ubuntu1
  Uname: Linux 3.4.67 armv7l
  ApportVersion: 2.15.1-0ubuntu2
  Architecture: armhf
  Date: Wed Jan 21 15:45:36 2015
  InstallationDate: Installed on 2015-01-21 (0 days ago)
  InstallationMedia: Ubuntu Vivid Vervet (development branch) - armhf 
(20150121-020205)
  SourcePackage: address-book-app
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1413284/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1382322] Re: Play in music app button is too small for spanish translation

** Changed in: ubuntu-ux
 Assignee: (unassigned) => James Mulholland (jamesmulholland)

** Changed in: ubuntu-ux
   Status: New => Triaged

** Changed in: ubuntu-ux
   Importance: Undecided => Low

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scope-mediascanner
in Ubuntu.
https://bugs.launchpad.net/bugs/1382322

Title:
  Play in music app button is too small for spanish translation

Status in Ubuntu Translations:
  New
Status in Ubuntu UX:
  Triaged
Status in unity-scope-mediascanner package in Ubuntu:
  Invalid
Status in unity8 package in Ubuntu:
  New

Bug description:
  See the attached image.

  It shows the spanish translation of the "Play in music app" button. It
  doesn't fit so it shows "Play in ap...".

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-translations/+bug/1382322/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1520500] Re: Feature: save or cache page

** Changed in: ubuntu-ux
 Assignee: (unassigned) => James Mulholland (jamesmulholland)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1520500

Title:
  Feature: save or cache page

Status in Ubuntu UX:
  Triaged
Status in webbrowser-app package in Ubuntu:
  Confirmed

Bug description:
  Browsers normally include some way to save a page, including all CSS,
  JavaScript and images necessary to show the page correctly.  This
  would be good in the Touch web browser.

  Justification:

  I would argue that saving web pages for later viewing is even more
  important on a mobile device than a computer.  On a computer you can
  reasonably just leave the browser open if you want to do something
  else and come back to it later.  On a phone the browser risks being
  closed for lack of memory, and you have no control over that.

  Furthermore, on a computer you normally have continuous internet
  access, so it's easy to go back to the page later.  On a phone you are
  frequently drifting in and out of good reception, so you may not be
  able to reload the page precisely when you need it most.

  For example, there's a webpage with a map showing an address, but when
  you get there you're in a notspot.  Open your browser to where you
  left it and you briefly get to see a fuzzy version of the map, which
  then immediately gets yanked away from you!

  My personal need is when I'm travelling.  I like to save
  wikitravel/wikipedia pages of the place I'm going, hotel pages,
  booking receipts and so on.  It is normal that when I first arrive in
  a city I have no SIM card, let alone 3G.  At the moment my solution is
  to use wget --page-requisites in a terminal to download the page, then
  run Apache in a chroot to serve the pages back to the browser.  This
  is fiddly and unpleasant.

  A traditional save/load style interface with a file chooser dialog
  might be nice.  I think better would be an option in the hamburger
  menu to "cache" the page, similar to bookmarking but it keeps a copy
  of the entire page.  Or you could save on UI surface area by always
  keeping an entire copy of any page that's bookmarked.

  My fantasy solution would be the above plus a dbus interface.  That
  would allow, for example, an itinerary app to automatically figure out
  which country/province/city I'm going to and pre-download relevant
  pages.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1520500/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1508438] Re: Do not notify for events marked as not attending

** Also affects: ubuntu-ux
   Importance: Undecided
   Status: New

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Paty Davila (dizzypaty)

** Changed in: ubuntu-ux
   Importance: Undecided => Medium

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-datetime in
Ubuntu.
https://bugs.launchpad.net/bugs/1508438

Title:
  Do not notify for events marked as not attending

Status in Canonical System Image:
  Fix Released
Status in Ubuntu UX:
  Triaged
Status in indicator-datetime package in Ubuntu:
  Fix Released

Bug description:
  This is a follow-up from bug #1371871. While it was marked as Fix
  Released, it doesn't seem to have had any effect. I'm reporting it as
  two separate bugs to reopen it now.

  I've got a few events in my calendar for meetings where I'm marked as
  not going, which I still want to see in my calendar unless I
  explicitly delete them.

  An example is a recurring event which I've got on my work calendar. During my 
holiday:
  - I'll mark myself as not attending
  - I will not delete the event
  - I don't expect to be notified

  As I'm not marked as attending, I wouldn't expect to get a reminder
  notification, even less if I'm in a different timezone and it's 3:00
  a.m. :)

  See bug 1508440 for the "display events not being attended clearly"
  part.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1508438/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1533842] Re: Provide an indication whether GPS is in use and the status/quality of the fix

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Paty Davila (dizzypaty)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-location in
Ubuntu.
https://bugs.launchpad.net/bugs/1533842

Title:
  Provide an indication whether GPS is in use and the status/quality of
  the fix

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in indicator-location package in Ubuntu:
  Confirmed

Bug description:
  Useful information for the user to understand whether a god fix is available 
or not
  Perhaps a colored dot on the icon

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1533842/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1532438] Re: the abcd scrollbar disapear too early

** Changed in: ubuntu-ux
 Assignee: (unassigned) => James Mulholland (jamesmulholland)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to address-book-app in
Ubuntu.
https://bugs.launchpad.net/bugs/1532438

Title:
  the abcd scrollbar disapear too early

Status in Ubuntu UX:
  Triaged
Status in address-book-app package in Ubuntu:
  New

Bug description:
  0. When looking for a contact,
  1. I scroll
  2. that ABCD scrollbar appears, it is cool, you want to find that first 
letter of your contact
  3. Let's says it is [M]um
  4. my brain understand I want 'M'
  5. I find it on the scrollbar
  6. I put my finger on 'M'
  7. tap it
  8. but during those milliseconds (4.5.6) the abcd scroll bar has disappear, 
means my click will happen on a contact, not the ABCD scrollbar.
  (that behaviour will create new unwanted step, back to contact list, scroll 
to make re-appear the scroll bar and eventually click on it with success, or 
just forfeit and manually scroll to the contact)

  (I've seen that bug for month/years, not a new regression)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1532438/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1533993] Re: Cannot in-line playback the online tracks from main view of music scope

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Paty Davila (dizzypaty)

** Changed in: ubuntu-ux
   Status: New => Triaged

** Changed in: ubuntu-ux
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1533993

Title:
  Cannot in-line playback the online tracks from main view of music
  scope

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in Unity SoundCloud Scope:
  New
Status in unity-scopes-shell package in Ubuntu:
  Invalid
Status in unity8 package in Ubuntu:
  Incomplete

Bug description:
  Test Environment:
  $ system-image-cli -i
  current build number: 228
  device name: krillin
  channel: ubuntu-touch/rc-proposed/bq-aquaris.en
  last update: 2016-01-13 07:38:39
  version version: 228
  version ubuntu: 20160113
  version device: 20160108-efc96d8
  version custom: 2015--36-46-vivid

  Steps:
  1.Go to Music Scope
  2.Select a local track from My Music section and tap on the thumbnail to play
  =>Be able to playback the track on main view
  3.Scroll down a little bit to SoundCloud section
  4.Select an on-line track from SoundCloud section and try to in-line play it 
on main view

  Actual result:
  Cannot in-line playback the on-line tracks from main view

  Expected result:
  According to UX spec of Media consumption for 
Scopes(https://docs.google.com/document/d/18jRyUvJ29ykAKgQ9zk7q6FJEvz51mMFBT8_TFUUclDY/edit),
 on-line tracks can be in-line played as well

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1533993/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1531268] Re: Wizard does not change user password if one is pre-set

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Paty Davila (dizzypaty)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1531268

Title:
  Wizard does not change user password if one is pre-set

Status in Canonical System Image:
  Fix Released
Status in Ubuntu UX:
  Triaged
Status in unity8 package in Ubuntu:
  Fix Released

Bug description:
  Whatever is selected (swipe, passcode, password) during the wizard is
  not set and the default code of  is required

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1531268/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1358050] Re: Some icons assume familiarity with other OS

2016-08-26 Thread Alan Bell

seriously? you are going to wilfully infringe on registered trademarks, you 
have been offered alternative suggestions and accepting them is low priority?
What can the community do to sort this out? I have done two merge requests with 
different browser icons, both were rejected. The design team clearly don't want 
to address it, so we have a "patches not welcome" situation. Where do we go 
from here? Is looking like a cheap knockoff a design goal?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-themes in Ubuntu.
https://bugs.launchpad.net/bugs/1358050

Title:
  Some icons assume familiarity with other OS

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in ubuntu-themes package in Ubuntu:
  Confirmed

Bug description:
  Attached is a comparison between Windows, Android, iOS(6) and
  tentative Ubuntu icons. The first 3 application icons bare a striking
  similarity to  the IOS(6) equivalent while the last to Google Maps.

  The browser icon assumes familiarity with Safari, or possibly Webkit.
  A user unfamiliar with them may see a compass and map and assume a
  map.

  The bigger issue being that the icons are so close to the iOS/Google
  ones that it may give the appearance of Ubuntu being a cheap knockoff,
  or worse, be vulnerable to a lawsuit. Apple has sued Samsung over a
  similar situation before.

  There are other ways of communicating those apps, which is shown in
  the Alternate column. These are not meant to be replacements, I'm no
  designer. They are merely illustrations of a different concept for the
  icons so as to not be too similar to Apple and Google's offereing:

  Browser:
  What was wrong with the earlier globe version?

  Calculator:
  Why not a "divide by" button rather than "equal", make all buttons an Ubuntu 
orange squircle?

  Contacts:
  How about a rolodex? Yes people won't be familiar with them, but if they see 
a contact and information that should be enough

  Maps:
  A treasure map would be a very different way of going about it.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1358050/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1617118] Re: [MS-7349, Nvidia MCP67 HDMI, Digital Out, HDMI] Sound is distorted

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: alsa-driver (Ubuntu)
Status: New => Confirmed

--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1617118

Title:
[MS-7349, Nvidia MCP67 HDMI, Digital Out, HDMI] Sound is distorted

Status in alsa-driver package in Ubuntu:
Confirmed

Bug description:
Hello,

At first I did an upgrade from 14.04 LTS via the screen pop-up asking if I
wanted to upgrade to 16.04, of course I clicked yes. First bad move.
I took a almost perfect HTPC Media system down to a almost unusable system. I
thought it was due to a bad upgrade so I proceeded to do a new install via CD.
Second bad move. I did not back up all my audio settings in 14.04.
I usually run a media program called Kodi(XBMC), but I haven't yet gotten to
that since I tried Youtube and Netflix and found that the audio was fuzzy and
distorted.
My system consists of an older computer with HDMI directly driving a Vizio 45
inch TV. Again, this has worked fine with 14.04. I do remember having to change
my sample rate within Kodi, but not with any Browser video streaming such as
Youtube, Netflix or any other paid premium channels that I have.

Now to the point of the matter.
Here is what is on my system now.
Linux HTPC 4.4.0-34-generic #53-Ubuntu SMP Wed Jul 27 16:06:39 UTC 2016
x86_64 x86_64 x86_64 GNU/Linux
Dual core AMD cpu, 4Gig of ram

Here is a link to my Alsa information http://pastebin.com/3J7aT0BD
Here is another link to my Pulse daemon.conf http://pastebin.com/gXVeYK9T
The only thing I tried with the daemon.conf was removing the rem ; from the
sample rate area and swapped the rates around. I tried the default settings
first then swapped the 48000 with the 41000. No change. Apparently this is not
the area to make the change. My findings some time back with the distortion
witin Kodi, it was due to the sample rate being too high or too low driving the
HDMI audio to the TV. Sorry I cannot remember which.
When in Kodi when I had this issue under 14.4, it was contained to Kodi only
no other programs.
As of 16.04 this audio distortion is mainly all browser streaming. As of the
last I checked both Firefox and Chrome has distorted audio. VLC and other media
players seem to be okay.

Sorry for this long winded post.

I hope all this information will help in correcting this issue in 16.04..
Thanks
GEE

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: alsa-base 1.0.25+dfsg-0ubuntu5
ProcVersionSignature: Ubuntu 4.4.0-34.53-generic 4.4.15
Uname: Linux 4.4.0-34-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: gee2932 F pulseaudio
/dev/snd/controlC1: gee2932 F pulseaudio
CurrentDesktop: GNOME-Flashback:Unity
Date: Thu Aug 25 21:56:20 2016
InstallationDate: Installed on 2016-08-20 (5 days ago)
InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64
(20160719)
PackageArchitecture: all
SourcePackage: alsa-driver
Symptom: audio
Symptom_AlsaPlaybackTest: ALSA playback test through plughw:NVidia failed
Symptom_Card: Built-in Audio - HDA NVidia
Symptom_Jack: Digital Out, HDMI
Symptom_Type: Digital clip or distortion, or "overdriven" sound
Title: [MS-7349, Nvidia MCP67 HDMI, Digital Out, HDMI] Sound is distorted
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 03/19/2008
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: CaptiveWorks CW-3000HD V2.37
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: MS-7349
dmi.board.vendor: MSI
dmi.board.version: 1.0
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrCaptiveWorksCW-3000HDV2.37:bd03/19/2008:svnMSI:pnMS-7349:pvr1.0:rvnMSI:rnMS-7349:rvr1.0:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.name: MS-7349
dmi.product.version: 1.0
dmi.sys.vendor: MSI

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1617118/+subscriptions

--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1568485] Re: kernel: audit: type=1400 audit(1460259033.648:34): apparmor="DENIED" operation="sendmsg" info="Failed name lookup - disconnected path" error=-13

2016-08-26 Thread Mathew Hodson

** Tags removed: verification-needed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to isc-dhcp in Ubuntu.
https://bugs.launchpad.net/bugs/1568485

Title:
  kernel: audit: type=1400 audit(1460259033.648:34): apparmor="DENIED"
  operation="sendmsg" info="Failed name lookup - disconnected path"
  error=-13

Status in isc-dhcp package in Ubuntu:
  Fix Released
Status in isc-dhcp source package in Trusty:
  Fix Released
Status in isc-dhcp source package in Wily:
  Won't Fix

Bug description:
  Get this logged on a fully upgraded 64 desktop (proposed archive
  enabled)

  kernel: audit: type=1400 audit(1460259033.648:34): apparmor="DENIED"
  operation="sendmsg" info="Failed name lookup - disconnected path"
  error=-13 profile="/sbin/dhclient" name="run/systemd/journal/dev-log"
  pid=1102 comm="dhclient" requested_mask="w" denied_mask="w" fsuid=0
  ouid=0

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: apparmor 2.10.95-0ubuntu1
  ProcVersionSignature: Ubuntu 4.4.0-18.34-generic 4.4.6
  Uname: Linux 4.4.0-18-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_modeset nvidia
  ApportVersion: 2.20.1-0ubuntu1
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Sun Apr 10 12:23:56 2016
  ProcKernelCmdline: BOOT_IMAGE=/boot/vmlinuz-4.4.0-18-generic 
root=UUID=7c755ed6-51cc-4b75-88ac-9c75acf82749 ro
  SourcePackage: apparmor
  Syslog:
   
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1568485/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586654] Re: package sudo 1.8.16-0ubuntu1.1 failed to install/upgrade: subprocess installed pre-removal script returned error exit status 1

@ Seth Arnold

Thanks for pointing that out.

** Changed in: prey (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to sudo in Ubuntu.
https://bugs.launchpad.net/bugs/1586654

Title:
  package sudo 1.8.16-0ubuntu1.1 failed to install/upgrade: subprocess
  installed pre-removal script returned error exit status 1

Status in prey package in Ubuntu:
  Confirmed
Status in sudo package in Ubuntu:
  Invalid

Bug description:
  Failed on ordinary upgrade

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: sudo 1.8.16-0ubuntu1.1
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  Date: Sat May 28 11:48:23 2016
  ErrorMessage: subprocess installed pre-removal script returned error exit 
status 1
  InstallationDate: Installed on 2016-05-27 (1 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.1
   apt  1.2.10ubuntu1
  SourcePackage: sudo
  Title: package sudo 1.8.16-0ubuntu1.1 failed to install/upgrade: subprocess 
installed pre-removal script returned error exit status 1
  UpgradeStatus: No upgrade log present (probably fresh install)
  VisudoCheck:
   /etc/sudoers: parsed OK
   /etc/sudoers.d/50_prey_switcher: parsed OK
   /etc/sudoers.d/README: parsed OK

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/prey/+bug/1586654/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1617290] Re: OS and apps can't update

2016-08-26 Thread Jonas G. Drange

Thank you for reporting this, I'm not sure whether or not that traceback
is benign. We'll have to hear from Barry/a S-I maintainer to know for
sure.

** Changed in: ubuntu-system-settings (Ubuntu)
   Status: New => Incomplete

** Also affects: system-image (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to system-image in Ubuntu.
https://bugs.launchpad.net/bugs/1617290

Title:
  OS and apps can't update

Status in system-image package in Ubuntu:
  New
Status in ubuntu-system-settings package in Ubuntu:
  Incomplete

Bug description:
  Hello, I have a problem on my M10 FHD witch is on rc-proposed channel (r173 
now). I can't receive any updates for system image or any installed app. I even 
receive a notify in message indicator, but when I open update manager it 
searches for updates and found nothing (saying that my system is up to date). 
There should be updates at least for some apps and 2 system image updates since 
then. Rebooting and shutdowning device didn't help. My Meizu MX4 is updating 
normally with
  the same network connection.

  It would be very nice to have some workaround and fix this.

  `system-image-cli -n -vv` ouput:

  phablet@ubuntu-phablet:~$ system-image-cli -n -vv
  [systemimage] Aug 25 12:31:41 2016 (5245) -> [ 1] _cleanup
  [systemimage] Aug 25 12:31:41 2016 (5245) -> [ 2] _get_blacklist_1
  [systemimage] Aug 25 12:31:41 2016 (5245) No valid image master key found, 
downloading
  [systemimage] Aug 25 12:31:41 2016 (5245) [0xf60d0850] Requesting group 
download:
  https://system-image.ubuntu.com/gpg/image-master.tar.xz -> 
/android/cache/recovery/keyring.tar.xz
  https://system-image.ubuntu.com/gpg/image-master.tar.xz.asc -> 
/android/cache/recovery/keyring.tar.xz.asc

  [systemimage] Aug 25 12:31:41 2016 (5245) Allow GSM? No
  [systemimage] Aug 25 12:31:41 2016 (5245) 
[/com/canonical/applications/download/com_2eubuntu_2eterminal_5fterminal_5f0_2e7_2e198/fcef27f761f34d45a7cd71a17c0089dc]
 Running group download reactor
  [systemimage] Aug 25 12:31:41 2016 (5245) self: , self._iface:  :1.141 
/com/canonical/applications/download/com_2eubuntu_2eterminal_5fterminal_5f0_2e7_2e198/fcef27f761f34d45a7cd71a17c0089dc
 at 0xf60d0930> implementing 'com.canonical.applications.GroupDownload' at 
0xf60d0890>
  [systemimage] Aug 25 12:32:21 2016 (5245) 
https://system-image.ubuntu.com/gpg/image-master.tar.xz:
  [systemimage] Aug 25 12:32:21 2016 (5245) 
[/com/canonical/applications/download/com_2eubuntu_2eterminal_5fterminal_5f0_2e7_2e198/fcef27f761f34d45a7cd71a17c0089dc]
 Group download reactor done
  [systemimage] Aug 25 12:32:21 2016 (5245) Reactor error: 
https://system-image.ubuntu.com/gpg/image-master.tar.xz:
  Exception occurred during dry-run; see log file for details
  [systemimage] Aug 25 12:32:21 2016 (5245) system-image-cli exception
  Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/systemimage/main.py", line 365, in main
  state.run_until('download_files')
File "/usr/lib/python3/dist-packages/systemimage/state.py", line 179, in 
run_until
  step()
File "/usr/lib/python3/dist-packages/systemimage/state.py", line 210, in 
_get_blacklist_1
  'image-master', 'gpg/image-master.tar.xz', 'archive-master')
File "/usr/lib/python3/dist-packages/systemimage/keyring.py", line 107, in 
get_keyring
  (ascxz_src, ascxz_dst),
File "/usr/lib/python3/dist-packages/systemimage/download.py", line 209, in 
get_files
  self._get_files(records, pausable, signal_started)
File "/usr/lib/python3/dist-packages/systemimage/udm.py", line 175, in 
_get_files
  raise FileNotFoundError(reactor.error)
  FileNotFoundError: https://system-image.ubuntu.com/gpg/image-master.tar.xz:
  phablet@ubuntu-phablet:~$

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/system-image/+bug/1617290/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1617335] [NEW] notifications not making their way to unity8 from libertine

2016-08-26 Thread kevin gunn

Public bug reported:

Not completely sure where this bug lies.
This was an area of "this should just work" in theory.
We did perform some investigation using notification but it's not clear if the 
msg is somehow getting lost on in dbus or if unity8 is somehow 
rejecting/ignoring.

** Affects: canonical-devices-system-image
 Importance: Undecided
 Status: New

** Affects: libertine (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

** Also affects: canonical-devices-system-image
   Importance: Undecided
   Status: New

** Also affects: libertine (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1617335

Title:
  notifications not making their way to unity8 from libertine

Status in Canonical System Image:
  New
Status in libertine package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  Not completely sure where this bug lies.
  This was an area of "this should just work" in theory.
  We did perform some investigation using notification but it's not clear if 
the msg is somehow getting lost on in dbus or if unity8 is somehow 
rejecting/ignoring.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1617335/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1617339] [NEW] dash takes much time to load, black and white screen instead of dash

2016-08-26 Thread Victor gonzalez

Public bug reported:

Enviroment:

current build number: 175
device name: frieza
channel: ubuntu-touch/rc-proposed/bq-aquaris-pd.en
last update: 2016-08-26 12:27:57
version version: 175
version ubuntu: 20160826
version device: 20160809.0
version custom: 20160805--42-20-vivid

Product: BQ M10 FHD

Steps to reproduce:

1º Reboot Frieza
2º Watch how unity8 loads the dash and scopes

Current result: Unity sometimes hang when loading the dash and scopes, showing 
a black and white screen 
Expected result: Scopes should appear and load fast on first boot

Additional info: syslog,unity's crash files, unity8 logs and video
attached.

Logs time stamp: 15:52:50 - 15:54

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1617339

Title:
  dash takes much time to load, black and white screen instead of dash

Status in unity8 package in Ubuntu:
  New

Bug description:
  Enviroment:

  current build number: 175
  device name: frieza
  channel: ubuntu-touch/rc-proposed/bq-aquaris-pd.en
  last update: 2016-08-26 12:27:57
  version version: 175
  version ubuntu: 20160826
  version device: 20160809.0
  version custom: 20160805--42-20-vivid

  Product: BQ M10 FHD

  Steps to reproduce:

  1º Reboot Frieza
  2º Watch how unity8 loads the dash and scopes

  Current result: Unity sometimes hang when loading the dash and scopes, 
showing a black and white screen 
  Expected result: Scopes should appear and load fast on first boot

  Additional info: syslog,unity's crash files, unity8 logs and video
  attached.

  Logs time stamp: 15:52:50 - 15:54

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1617339/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1617338] [NEW] this cauese my display to freeze and shake every 3seconds or so

2016-08-26 Thread X.Prashanth Lidwin Jesuuva

Public bug reported:

due to some bug in my hardware my display in ubuntu is freezing or
shaking for a period of every 3 seconds or so i have reinstalled ubuntu
freshly thrice but the same problem remains

mmy graphics driver is :  Atom Processor Z36xxx/Z37xxx Series Graphics &
Display

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: xorg 1:7.7+1ubuntu8.1
ProcVersionSignature: Ubuntu 3.13.0-93.140-generic 3.13.11-ckt39
Uname: Linux 3.13.0-93-generic x86_64
.tmp.unity.support.test.0:
 
ApportVersion: 2.14.1-0ubuntu3.21
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
CurrentDesktop: Unity
Date: Fri Aug 26 19:33:59 2016
DistUpgraded: Fresh install
DistroCodename: trusty
DistroVariant: ubuntu
ExtraDebuggingInterest: I just need to know a workaround
GraphicsCard:
 Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display 
[8086:0f31] (rev 0a) (prog-if 00 [VGA controller])
   Subsystem: Hewlett-Packard Company Device [103c:2190]
InstallationDate: Installed on 2016-08-25 (1 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2)
Lsusb:
 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
 Bus 001 Device 004: ID 04f2:b40e Chicony Electronics Co., Ltd HP Truevision HD 
camera
 Bus 001 Device 005: ID 0cf3:3121 Atheros Communications, Inc. 
 Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Hewlett-Packard HP 15 Notebook PC
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-93-generic.efi.signed 
root=UUID=e84fe7e4-02c1-4141-a02c-751b41fbb2e2 ro quiet splash vt.handoff=7
SourcePackage: xorg
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 11/29/2013
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.08
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: 2190
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 40.17
dmi.chassis.asset.tag: Chassis Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: Chassis Version
dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.08:bd11/29/2013:svnHewlett-Packard:pnHP15NotebookPC:pvr097610405F1610180:rvnHewlett-Packard:rn2190:rvr40.17:cvnHewlett-Packard:ct10:cvrChassisVersion:
dmi.product.name: HP 15 Notebook PC
dmi.product.version: 097610405F1610180
dmi.sys.vendor: Hewlett-Packard
version.compiz: compiz 1:0.9.11.3+14.04.20160425-0ubuntu1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.67-1ubuntu0.14.04.1
version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.6
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.6
version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.6
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2
xserver.bootTime: Fri Aug 26 19:08:38 2016
xserver.configfile: default
xserver.errors:
 
xserver.logfile: /var/log/Xorg.0.log
xserver.outputs:
 product id8428 
 vendor AUO
xserver.version: 2:1.15.1-0ubuntu2.7

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug compiz-0.9 trusty ubuntu

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1617338

Title:
  this cauese my display to freeze and shake every 3seconds or so

Status in xorg package in Ubuntu:
  New

Bug description:
  due to some bug in my hardware my display in ubuntu is freezing or
  shaking for a period of every 3 seconds or so i have reinstalled
  ubuntu freshly thrice but the same problem remains

  mmy graphics driver is :  Atom Processor Z36xxx/Z37xxx Series Graphics
  & Display

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8.1
  ProcVersionSignature: Ubuntu 3.13.0-93.140-generic 3.13.11-ckt39
  Uname: Linux 3.13.0-93-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.21
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Fri Aug 26 19:33:59 2016
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  ExtraDebuggingInterest: I just need to know a workaround
  GraphicsCard:
   Intel Corporation Atom

[Touch-packages] [Bug 1616548] Re: Cups causes LibreOffice unittests to loop in a sbuild

2016-08-26 Thread Till Kamppeter

To the developers of sbuild: If sbuild is used on a desktop machine
(which is running CUPS) and the package built inside sbuild has a
"BuildRequires: cups-daemon" making another instance of CUPS running in
sbuild's chroot, could this lead to conflicts like both CUPS daemons
claiming port 631 and so the later daemon (in sbuild's chroot) not
starting up correctly?

The problem of two conflicting CUPS daemons should not occur on servers
as on servers CUPS is usually not running (only on print servers, and I
cannot imaging that the build cluster servers are also print servers).
But nevertheless we should find a fix to allow developers to use sbuild
on desktop machines.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1616548

Title:
  Cups causes LibreOffice unittests to loop in a sbuild

Status in cups package in Ubuntu:
  Incomplete
Status in sbuild package in Ubuntu:
  Incomplete

Bug description:
  When building LibreOffice 1:5.2.0-0ubuntu1 on a xenial host with a
  yakkety sbuild, e.g. by:

  sbuild -A -d yakkety-amd64 (...).dsc

  this loops/busy hangs with unittests. This was working ok up to
  5.2.0~rc4 (=final), it is a regression by a LibreOffice dependency,
  most likely CUPS, which was updated.

  I tried to inject debug symbols by running with a: --chroot-setup-
  command and then run something along the lines of:

   apt install cups
   wget http://launchpadlibrarian.net/278966811/cups-dbgsym_2.2~rc1-4_amd64.ddeb
   wget 
http://launchpadlibrarian.net/278966816/libcups2-dbgsym_2.2~rc1-4_amd64.ddeb
   dpkg -i cups-dbgsym_2.2~rc1-4_amd64.ddeb
   dpkg -i libcups2-dbgsym_2.2~rc1-4_amd64.ddeb

  before starting the build proper, but I got only marginally better
  debug info. The hanging LibreOffice test processes usually have 2-4
  child processes. The parent and one of the childs are busy, while the
  rest idle.

  Here is a stacktrace of the busy child:

  Program received signal SIGPIPE, Broken pipe.
  0x2b0a80dd615f in fgetspent (stream=0x11) at fgetspent.c:43
  43in fgetspent.c
  (gdb) bt
  #0  0x2b0a80dd615f in fgetspent (stream=0x11) at fgetspent.c:43
  #1  0x001e in ?? ()
  #2  0x55c4976981e0 in ?? ()
  #3  0x2b0a8aff8d20 in ipp_options () from 
/usr/lib/x86_64-linux-gnu/libcups.so.2
  #4  0x4002 in ?? ()
  #5  0x2b0a8ada9feb in ppdCollect2 (ppd=0x2b0a8ada9bdf 
, section=29, min_order=0, choices=0x2b0a8adad6f3 
) at emit.c:145
  #6  0x in ?? ()

  Here is a stacktrace of the busy parent:

  Thread 3 "CUPSManager cup" received signal SIGPIPE, Broken pipe.
  0x2b0a80dd615f in fgetspent (stream=0x11) at fgetspent.c:43
  43in fgetspent.c
  (gdb) bt
  #0  0x2b0a80dd615f in fgetspent (stream=0x11) at fgetspent.c:43
  #1  0x001e in ?? ()
  #2  0x55c4976981e0 in ?? ()
  #3  0x2b0a8aff8d20 in ipp_options () from 
/usr/lib/x86_64-linux-gnu/libcups.so.2
  #4  0x4002 in ?? ()
  #5  0x2b0a8ada9feb in ppdCollect2 (ppd=0x2b0a8ada9bdf 
, section=29, min_order=0, choices=0x2b0a8adad6f3 
) at emit.c:145
  #6  0x in ?? ()

  
  When pressing "c" in gdb to continue, both processes stop very quickly again 
with the SIGPIPE.
  Venturing a guess: Is the signal handling of CUPS b0rked? As fgetspent reads 
the shadow file[1], maybe there are missing permissions or other sandbox issues 
that CUPS doesnt handle error cases for properly?

  [1] http://linux.die.net/man/3/fgetspent

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1616548/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1576698] Re: ntpdate-debian not working

As I confirmed in the past already - here the easy steps to check for
latter SRU template:

Repro:
# e.g. spawn xenial container
# Note: only occurs when ntp is installed as well
$ apt-get install ntpdate ntp
$ ntpdate-debian

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ntp in Ubuntu.
https://bugs.launchpad.net/bugs/1576698

Title:
  ntpdate-debian not working

Status in NTP:
  Fix Released
Status in ntp package in Ubuntu:
  In Progress

Bug description:
  in 16.04 I get this
  # ntpdate-debian
  28 Apr 09:54:14 ntpdate[30747]: no servers can be used, exiting

  The problem is that ntpdate-debian parse  /etc/ntp.conf, searchin for the 
word "server",
  but the format of the file as changed a bit

  < server 0.ubuntu.pool.ntp.org
  < server 1.ubuntu.pool.ntp.org
  < server 2.ubuntu.pool.ntp.org
  < server 3.ubuntu.pool.ntp.org
  ---
  > pool 0.ubuntu.pool.ntp.org iburst
  > pool 1.ubuntu.pool.ntp.org iburst
  > pool 2.ubuntu.pool.ntp.org iburst
  > pool 3.ubuntu.pool.ntp.org iburst
  25c24
  < server ntp.ubuntu.com
  ---
  > pool ntp.ubuntu.com

  the word server as been replaced by "pool"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ntp/+bug/1576698/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1616968] Re: Emergency dialer wrongly sized (cut off at top)

** Branch linked: lp:~nick-dedekind/qtubuntu/1616968-position-shift

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1616968

Title:
  Emergency dialer wrongly sized (cut off at top)

Status in Canonical System Image:
  In Progress
Status in qtubuntu package in Ubuntu:
  In Progress

Bug description:
  The emergency dialer (lock phone, tap "emergency call") is cut off at
  the top, sized at panel-height too high.

  Steps:
  * have a locked phone
  * make sure dialer isn't running
  * swipe greeter away
  * tap on "Emergency call"

  Expected:
  * emergency dialer shows fullscreen

  Current:
  * emergency dialer shows cut off at the top

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: qtdeclarative5-qtmir-plugin 0.4.8+15.04.20160819-0ubuntu1
  Uname: Linux 3.4.67 armv7l
  ApportVersion: 2.17.2-0ubuntu1.3touch1
  Architecture: armhf
  Date: Thu Aug 25 15:20:10 2016
  InstallationDate: Installed on 2016-08-25 (0 days ago)
  InstallationMedia: Ubuntu 15.04 - armhf (20160825-020303)
  SourcePackage: qtmir
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1616968/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1576698] Re: ntpdate-debian not working

This was really worth to take a look again.
Whatever was fixed in between in Debian was lost up unto the last version.
So other than assumed the fix was not in.

Pinging the Debian bug and working on a Y fix (which is the prereq for a
backport)

** Changed in: ntp (Ubuntu)
   Status: Fix Released => In Progress

** Changed in: ntp (Ubuntu)
 Assignee: (unassigned) => ChristianEhrhardt (paelzer)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ntp in Ubuntu.
https://bugs.launchpad.net/bugs/1576698

Title:
  ntpdate-debian not working

Status in NTP:
  Fix Released
Status in ntp package in Ubuntu:
  In Progress

Bug description:
  in 16.04 I get this
  # ntpdate-debian
  28 Apr 09:54:14 ntpdate[30747]: no servers can be used, exiting

  The problem is that ntpdate-debian parse  /etc/ntp.conf, searchin for the 
word "server",
  but the format of the file as changed a bit

  < server 0.ubuntu.pool.ntp.org
  < server 1.ubuntu.pool.ntp.org
  < server 2.ubuntu.pool.ntp.org
  < server 3.ubuntu.pool.ntp.org
  ---
  > pool 0.ubuntu.pool.ntp.org iburst
  > pool 1.ubuntu.pool.ntp.org iburst
  > pool 2.ubuntu.pool.ntp.org iburst
  > pool 3.ubuntu.pool.ntp.org iburst
  25c24
  < server ntp.ubuntu.com
  ---
  > pool ntp.ubuntu.com

  the word server as been replaced by "pool"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ntp/+bug/1576698/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1576698] Re: ntpdate-debian not working

I don't know how this was lost in between Debian versions, but it happened.
Since Ubuntu already merged the latest ntp we have to push that as delta for 
now - the respective debian bug is already updated.

I have prepped a fix for yakkety (which will should eventually also go via SRU 
into Xenial).
I tested the fix on Yakkety already and it works just fine.
While we are past FF, this clearly is a bugfix-only change.

Attaching debdiff and subscribing sponsors.

Once in Yakkety we can tackle the SRU for Xenial.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ntp in Ubuntu.
https://bugs.launchpad.net/bugs/1576698

Title:
  ntpdate-debian not working

Status in NTP:
  Fix Released
Status in ntp package in Ubuntu:
  In Progress

Bug description:
  [Impact]

   * ntpdate-debian fails to work if ntp is installed at the same time
  due to a conflict in the updated ntp config to the ntpdate-debian
  script.

  [Test Case]
  # e.g. spawn xenial container
  # Note: only occurs when ntp is installed as well
  $ apt-get install ntpdate ntp
  $ ntpdate-debian
  (Note for latter verification enable proposed in that container and re-update 
ntpdate)

  [Regression Potential]

   * There could exists a custom user conf that had a mixed server AND
  pool specified, that now will use the first of both types while
  instead formerly it would have used the first server entry. The chance
  for this is super-low IMHO, but this case exists.


  

  
  in 16.04 I get this
  # ntpdate-debian
  28 Apr 09:54:14 ntpdate[30747]: no servers can be used, exiting

  The problem is that ntpdate-debian parse  /etc/ntp.conf, searchin for the 
word "server",
  but the format of the file as changed a bit

  < server 0.ubuntu.pool.ntp.org
  < server 1.ubuntu.pool.ntp.org
  < server 2.ubuntu.pool.ntp.org
  < server 3.ubuntu.pool.ntp.org
  ---
  > pool 0.ubuntu.pool.ntp.org iburst
  > pool 1.ubuntu.pool.ntp.org iburst
  > pool 2.ubuntu.pool.ntp.org iburst
  > pool 3.ubuntu.pool.ntp.org iburst
  25c24
  < server ntp.ubuntu.com
  ---
  > pool ntp.ubuntu.com

  the word server as been replaced by "pool"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ntp/+bug/1576698/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1582767] Re: apparmor permissions missing for winbind

Hi,
just to note I'd consider this not important enough for an SRU given the fact 
that it is a very rare case and people can add the rule themselves if the need 
to.

** Changed in: ntp (Ubuntu Xenial)
   Status: New => Won't Fix

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ntp in Ubuntu.
https://bugs.launchpad.net/bugs/1582767

Title:
  apparmor permissions missing for winbind

Status in ntp package in Ubuntu:
  Fix Released
Status in ntp source package in Xenial:
  Won't Fix

Bug description:
  When using Winbind, ntpd needs to access the Winbind pipe:

  May 17 16:23:15 bo kernel: [   27.598551] type=1400
  audit(1463494995.048:18): apparmor="DENIED" operation="connect"
  profile="/usr/sbin/ntpd" name="/run/samba/winbindd/pipe" pid=1517
  comm="ntpd" requested_mask="rw" denied_mask="rw" fsuid=0 ouid=0

  Would there be any reason not to allow this ? I added the following
  line to /etc/apparmor/init/network-interface-security/usr.sbin.ntpd:

  /run/samba/winbindd/pipe rw,

  Thanks!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ntp/+bug/1582767/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1617339] Re: dash takes much time to load, black and white screen instead of dash

2016-08-26 Thread Victor gonzalez

** Attachment added: "video+logs.zip"
   
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1617339/+attachment/4728361/+files/video+logs.zip

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1617339

Title:
  dash takes much time to load, black and white screen instead of dash

Status in unity8 package in Ubuntu:
  New

Bug description:
  Enviroment:

  current build number: 175
  device name: frieza
  channel: ubuntu-touch/rc-proposed/bq-aquaris-pd.en
  last update: 2016-08-26 12:27:57
  version version: 175
  version ubuntu: 20160826
  version device: 20160809.0
  version custom: 20160805--42-20-vivid

  Product: BQ M10 FHD

  Steps to reproduce:

  1º Reboot Frieza
  2º Watch how unity8 loads the dash and scopes

  Current result: Unity sometimes hang when loading the dash and scopes, 
showing a black and white screen 
  Expected result: Scopes should appear and load fast on first boot

  Additional info: syslog,unity's crash files, unity8 logs and video
  attached.

  Logs time stamp: 15:52:50 - 15:54

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1617339/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1611010] Re: yakkety desktop - non-english installation crashes with /plugininstall.py: ValueError: invalid literal for int() with base 10: ''

2016-08-26 Thread Nairwolf

Thank you for your bug fix ! I've tested yesterday with the daily build
of Xubuntu 08/25. Ubiquity was updated to 16.10.8 but I had to update
apt to 1.3~rc2ubuntu3.

But I can confirm it works now, with a french keyboard ;)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.launchpad.net/bugs/1611010

Title:
  yakkety desktop - non-english installation crashes with
  /plugininstall.py: ValueError: invalid literal for int() with base 10:
  ''

Status in apt package in Ubuntu:
  Fix Released
Status in ubiquity package in Ubuntu:
  Fix Released

Bug description:
  Enviroment: Ubuntu 16.10.5 Yakkety Yak http://cdimage.ubuntu.com
  /daily-live/current/

  HW: Toshiba portege Z30-A12T | Intel i5+intel graphics | SSD hd

  Preconditions: W10+Xenial xerus installed, internet connection, 3rd
  party sw and updates selected

  Steps to reproduce:

  1º Click something else on Installation type screen>select /dev/sdaX where 
Xenial is installed, use it to mount / and leave some space to create the /home 
partition(ext4)
  2º Then click back and select erase ubuntu 16.04.1 and install Yakkety
  3º Installation starts

  Current result: After a little time installing it crashes and a window
  shows up to let the user know that some info is being gathered to send
  it to developers, and finally firefox opens on the bug report web on
  ubiquity package

  Expected result: No crashes during installation

  ProblemType: Bug
  DistroRelease: Ubuntu 16.10
  Package: ubiquity 16.10.5
  ProcVersionSignature: Ubuntu 4.4.0-33.52-generic 4.4.15
  Uname: Linux 4.4.0-33-generic x86_64
  ApportVersion: 2.20.3-0ubuntu5
  Architecture: amd64
  CasperVersion: 1.376
  Date: Mon Aug  8 15:50:56 2016
  InstallCmdLine: file=/cdrom/preseed/ubuntu.seed boot=casper 
initrd=/casper/initrd.lz quiet splash --- maybe-ubiquity
  LiveMediaBuild: Ubuntu 16.10 "Yakkety Yak" - Alpha amd64 (20160808)
  ProcEnviron:
   LANGUAGE=es_ES.UTF-8
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=es_ES.UTF-8
  SourcePackage: ubiquity
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1611010/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1614542] Re: [MIR] ubuntu-keyboard

2016-08-26 Thread Michael Terry

** Changed in: ubuntu-keyboard (Ubuntu)
   Status: Confirmed => Fix Committed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu.
https://bugs.launchpad.net/bugs/1614542

Title:
  [MIR] ubuntu-keyboard

Status in ubuntu-keyboard package in Ubuntu:
  Fix Committed

Bug description:
  [Availability]
   * Available in universe

  [Rationale]
   * This package is required by unity8

  [Security]
   * No known security issues at this time.

  [Quality assurance]
   * This package has unit tests and autopilot tests.

  [Dependencies]
   Missing dependencies:
* fonts-droid-fallback -- There's a branch currently landing that adds 
fonts-noto as an optional replacement for this (fonts-noto isn't a suitable 
replacement on phone platforms though, as it requires significantly more space 
on the image): 
https://code.launchpad.net/~michael-sheldon/ubuntu-keyboard/optional-fonts-noto-dependency/+merge/303156
   * libpinyin7 -- MIR: 
https://bugs.launchpad.net/ubuntu/+source/libpinyin/+bug/1613053
   * maliit-framework/libmaliit-plugins0 -- MIR: 
https://bugs.launchpad.net/ubuntu/+source/maliit-framework/+bug/1613267
   * gles variants of libqt5gui5-gles, libqt5quick5-gles and 
qml-module-ubuntu-components-gles (the non-gles variants are already in main 
and are the first choice for these dependencies)

   The only other missing dependencies are for the ubuntu-keyboard-
  autopilot package, I'm unclear on if these are needed, since the
  autopilot package itself isn't needed by anything in main?

  [Standards compliance]
   * This package uses qmake and is fully translatable.

  [Maintenance]
   * This package is maintained by Canonical and actively in use on the phone 
and tablet images

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-keyboard/+bug/1614542/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1576698] Re: ntpdate-debian not working

** Patch added: "Fix bug as Ubuntu delta since it was lost in Debian prior to 
the last merge"
   
https://bugs.launchpad.net/ubuntu/+source/ntp/+bug/1576698/+attachment/4728323/+files/fix-1576698-ntpdate-parsing.debdiff

** Description changed:

+ [Impact]
+ 
+  * ntpdate-debian fails to work if ntp is installed at the same time due
+ to a conflict in the updated ntp config to the ntpdate-debian script.
+ 
+ [Test Case]
+ # e.g. spawn xenial container
+ # Note: only occurs when ntp is installed as well
+ $ apt-get install ntpdate ntp
+ $ ntpdate-debian
+ (Note for latter verification enable proposed in that container and re-update 
ntpdate)
+ 
+ [Regression Potential]
+ 
+  * There could exists a custom user conf that had a mixed server AND
+ pool specified, that now will use the first of both types while instead
+ formerly it would have used the first server entry. The chance for this
+ is super-low IMHO, but this case exists.
+ 
+ 
+ 
+ 
+ 
  in 16.04 I get this
  # ntpdate-debian
  28 Apr 09:54:14 ntpdate[30747]: no servers can be used, exiting
  
  The problem is that ntpdate-debian parse  /etc/ntp.conf, searchin for the 
word "server",
  but the format of the file as changed a bit
  
  < server 0.ubuntu.pool.ntp.org
  < server 1.ubuntu.pool.ntp.org
  < server 2.ubuntu.pool.ntp.org
  < server 3.ubuntu.pool.ntp.org
  ---
  > pool 0.ubuntu.pool.ntp.org iburst
  > pool 1.ubuntu.pool.ntp.org iburst
  > pool 2.ubuntu.pool.ntp.org iburst
  > pool 3.ubuntu.pool.ntp.org iburst
  25c24
  < server ntp.ubuntu.com
  ---
  > pool ntp.ubuntu.com
  
  the word server as been replaced by "pool"

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ntp in Ubuntu.
https://bugs.launchpad.net/bugs/1576698

Title:
  ntpdate-debian not working

Status in NTP:
  Fix Released
Status in ntp package in Ubuntu:
  In Progress

Bug description:
  [Impact]

   * ntpdate-debian fails to work if ntp is installed at the same time
  due to a conflict in the updated ntp config to the ntpdate-debian
  script.

  [Test Case]
  # e.g. spawn xenial container
  # Note: only occurs when ntp is installed as well
  $ apt-get install ntpdate ntp
  $ ntpdate-debian
  (Note for latter verification enable proposed in that container and re-update 
ntpdate)

  [Regression Potential]

   * There could exists a custom user conf that had a mixed server AND
  pool specified, that now will use the first of both types while
  instead formerly it would have used the first server entry. The chance
  for this is super-low IMHO, but this case exists.


  

  
  in 16.04 I get this
  # ntpdate-debian
  28 Apr 09:54:14 ntpdate[30747]: no servers can be used, exiting

  The problem is that ntpdate-debian parse  /etc/ntp.conf, searchin for the 
word "server",
  but the format of the file as changed a bit

  < server 0.ubuntu.pool.ntp.org
  < server 1.ubuntu.pool.ntp.org
  < server 2.ubuntu.pool.ntp.org
  < server 3.ubuntu.pool.ntp.org
  ---
  > pool 0.ubuntu.pool.ntp.org iburst
  > pool 1.ubuntu.pool.ntp.org iburst
  > pool 2.ubuntu.pool.ntp.org iburst
  > pool 3.ubuntu.pool.ntp.org iburst
  25c24
  < server ntp.ubuntu.com
  ---
  > pool ntp.ubuntu.com

  the word server as been replaced by "pool"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ntp/+bug/1576698/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1576698] Re: ntpdate-debian not working

Already prepped the SRU template, but waiting with a debdiff until the
fix is in Yakkety.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ntp in Ubuntu.
https://bugs.launchpad.net/bugs/1576698

Title:
  ntpdate-debian not working

Status in NTP:
  Fix Released
Status in ntp package in Ubuntu:
  In Progress

Bug description:
  [Impact]

   * ntpdate-debian fails to work if ntp is installed at the same time
  due to a conflict in the updated ntp config to the ntpdate-debian
  script.

  [Test Case]
  # e.g. spawn xenial container
  # Note: only occurs when ntp is installed as well
  $ apt-get install ntpdate ntp
  $ ntpdate-debian
  (Note for latter verification enable proposed in that container and re-update 
ntpdate)

  [Regression Potential]

   * There could exists a custom user conf that had a mixed server AND
  pool specified, that now will use the first of both types while
  instead formerly it would have used the first server entry. The chance
  for this is super-low IMHO, but this case exists.


  

  
  in 16.04 I get this
  # ntpdate-debian
  28 Apr 09:54:14 ntpdate[30747]: no servers can be used, exiting

  The problem is that ntpdate-debian parse  /etc/ntp.conf, searchin for the 
word "server",
  but the format of the file as changed a bit

  < server 0.ubuntu.pool.ntp.org
  < server 1.ubuntu.pool.ntp.org
  < server 2.ubuntu.pool.ntp.org
  < server 3.ubuntu.pool.ntp.org
  ---
  > pool 0.ubuntu.pool.ntp.org iburst
  > pool 1.ubuntu.pool.ntp.org iburst
  > pool 2.ubuntu.pool.ntp.org iburst
  > pool 3.ubuntu.pool.ntp.org iburst
  25c24
  < server ntp.ubuntu.com
  ---
  > pool ntp.ubuntu.com

  the word server as been replaced by "pool"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ntp/+bug/1576698/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1617326] [NEW] [Aspire 5735, Realtek ALC268, Mic, Internal] Background noise and low volume

2016-08-26 Thread bastet

Public bug reported:

There is a high background sound covering voice when using internal mic, making 
it unusable.
If I reduce the mic volume, the problem is the same. It is worse when using 
amplification.
I haven't this problem withe usb mic.

Evrything was working properly before upgrading to Xenial.

The distribution I'm using is:
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.1 LTS
uname -a
Linux cb-Aspire-5735 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 
2016 x86_64 x86_64 x86_64 GNU/Linux

My computer is Acer Aspire 5735

The sound card is 00:1b.0 Audio device: Intel Corporation 82801I (ICH9
Family) HD Audio Controller (rev 03).

The shipset is realtek alc268:
cat /proc/asound/pcm
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1

My version Alsa is
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version k4.4.0-31-generic.


I have edited the file /etc/pulse/default.pa and modified line ; "load-module 
module-udev-detect" by " load-module module-udev-detect tsched=0" as suggested 
here https://forum.ubuntu-fr.org/viewtopic.php?id=511551Description:   
Ubuntu 16.04.1 LTS
Release:16.04

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: alsa-base 1.0.25+dfsg-0ubuntu5
ProcVersionSignature: Ubuntu 4.4.0-34.53-generic 4.4.15
Uname: Linux 4.4.0-34-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/pcmC0D0c:   cb 3322 F...m pulseaudio
 /dev/snd/controlC0:  cb 3322 F pulseaudio
 /dev/snd/timer:  cb 3322 f pulseaudio
CurrentDesktop: Unity
Date: Fri Aug 26 15:17:23 2016
InstallationDate: Installed on 2016-05-31 (86 days ago)
InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1)
JournalErrors:
 Error: command ['journalctl', '-b', '--priority=warning', '--lines=1000'] 
failed with exit code 1: Hint: You are currently not seeing messages from other 
users and the system.
   Users in the 'systemd-journal' group can see all messages. Pass -q to
   turn off this notice.
 No journal files were opened due to insufficient permissions.
PackageArchitecture: all
ProcEnviron:
 LANGUAGE=fr_LU:fr
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=fr_LU.UTF-8
 SHELL=/bin/bash
SourcePackage: alsa-driver
Symptom: audio
Symptom_AlsaRecordingTest: ALSA recording test through plughw:Intel successful
Symptom_Card: Audio interne - HDA Intel
Symptom_Jack: Mic, Internal
Symptom_PulseAudioRecordingTest: PulseAudio recording test through plughw:Intel 
successful
Symptom_Type: High background noise, or volume is too low
Title: [Aspire 5735, Realtek ALC268, Mic, Internal] Background noise or low 
volume
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 09/10/2008
dmi.bios.vendor: Phoenix Technologies LTD
dmi.bios.version: V1.08
dmi.board.name: CathedralPeak
dmi.board.vendor: Acer
dmi.board.version: Rev
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: N/A
dmi.modalias: 
dmi:bvnPhoenixTechnologiesLTD:bvrV1.08:bd09/10/2008:svnAcer:pnAspire5735:pvr0100:rvnAcer:rnCathedralPeak:rvrRev:cvnAcer:ct10:cvrN/A:
dmi.product.name: Aspire 5735
dmi.product.version: 0100
dmi.sys.vendor: Acer

** Affects: alsa-driver (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug xenial

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1617326

Title:
  [Aspire 5735, Realtek ALC268, Mic, Internal] Background noise and low
  volume

Status in alsa-driver package in Ubuntu:
  New

Bug description:
  There is a high background sound covering voice when using internal mic, 
making it unusable.
  If I reduce the mic volume, the problem is the same. It is worse when using 
amplification.
  I haven't this problem withe usb mic.

  Evrything was working properly before upgrading to Xenial.

  The distribution I'm using is:
  DISTRIB_ID=Ubuntu
  DISTRIB_RELEASE=16.04
  DISTRIB_CODENAME=xenial
  DISTRIB_DESCRIPTION="Ubuntu 16.04.1 LTS
  uname -a
  Linux cb-Aspire-5735 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 
2016 x86_64 x86_64 x86_64 GNU/Linux

  My computer is Acer Aspire 5735

  The sound card is 00:1b.0 Audio device: Intel Corporation 82801I (ICH9
  Family) HD Audio Controller (rev 03).

  The shipset is realtek alc268:
  cat /proc/asound/pcm
  00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1

  My version Alsa is
  cat /proc/asound/version
  Advanced Linux Sound Architecture Driver Version k4.4.0-31-generic.

  
  I have edited the file /etc/pulse/default.pa and modified line ; "load-module 
module-udev-detect" by " load-module module-udev-detect tsched=0" as suggested 
here https://forum.ubuntu-fr.org/viewtopic.php?id=511551Description: Ubuntu 
16.04.1 LTS
  Release:  16.04

[Touch-packages] [Bug 1615116] Re: package gconf2 3.2.6-3ubuntu6 failed to install/upgrade: beroendeproblem - lämnar utlösare obehandlade

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gconf (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gconf in Ubuntu.
https://bugs.launchpad.net/bugs/1615116

Title:
  package gconf2 3.2.6-3ubuntu6 failed to install/upgrade:
  beroendeproblem - lämnar utlösare obehandlade

Status in gconf package in Ubuntu:
  Confirmed

Bug description:
  Error received when upgrading from 16.04 to 16.10

  ProblemType: Package
  DistroRelease: Ubuntu 16.10
  Package: gconf2 3.2.6-3ubuntu6
  ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13
  Uname: Linux 4.4.0-31-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  Date: Fri Aug 19 18:49:10 2016
  ErrorMessage: beroendeproblem - lämnar utlösare obehandlade
  InstallationDate: Installed on 2016-02-08 (193 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  RelatedPackageVersions:
   dpkg 1.18.10ubuntu1
   apt  1.3~rc2ubuntu2
  SourcePackage: gconf
  Title: package gconf2 3.2.6-3ubuntu6 failed to install/upgrade: 
beroendeproblem - lämnar utlösare obehandlade
  UpgradeStatus: Upgraded to yakkety on 2016-08-19 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gconf/+bug/1615116/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1459260] Re: Settings screen uses the word "Display" 15 times

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1459260

Title:
  Settings screen uses the word "Display" 15 times

Status in Ubuntu UX:
  Triaged
Status in unity-scopes-shell package in Ubuntu:
  Confirmed

Bug description:
  Ubuntu 15.04 r6

  1. Go to the Today scope.
  2. Tap the Settings button.

  What you see: The settings screen uses the word "Display" 15 times.

  What you should see: The screen uses the word "Display" either once
  ("Display:" as an intro label), or not at all.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1459260/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1524354] Re: too long string chain for warning about too high level when earphone is plugged

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Paty Davila (dizzypaty)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1524354

Title:
  too long string chain for warning about too high level when earphone
  is plugged

Status in Ubuntu Music App:
  Invalid
Status in Ubuntu Translations:
  Fix Committed
Status in Ubuntu UX:
  Triaged
Status in indicator-sound package in Ubuntu:
  Fix Released
Status in unity8 package in Ubuntu:
  Won't Fix

Bug description:
  The sentence for warning (when earphone plugged) about the
  dangerousness of high level is too long and should have a line break.
  Like this it doesn't fit the screen and it's quite hard to read. Maybe
  it's just a problem with the french string chain.

  On nexus 4 ubuntu/rc-proposed

To manage notifications about this bug go to:
https://bugs.launchpad.net/music-app/+bug/1524354/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1528198] Re: Need a dropdown component to work with TextField (Combo box)

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Femma (femma)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1528198

Title:
  Need a dropdown component to work with TextField (Combo box)

Status in Ubuntu UX:
  Triaged
Status in ubuntu-ui-toolkit package in Ubuntu:
  New

Bug description:
  It's a common pattern to display matching entries or history in a
  drop-down below a TextField, there should be a component for that.

  It is commonly known as a "Combo box"
  https://en.wikipedia.org/wiki/Combo_box

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1528198/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1615449] Re: Use upstream manpages instead of stub Debian-provided man page

2016-08-26 Thread Mathew Hodson

** Tags added: packaging

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to p11-kit in Ubuntu.
https://bugs.launchpad.net/bugs/1615449

Title:
  Use upstream manpages instead of stub Debian-provided man page

Status in p11-kit package in Ubuntu:
  Fix Released
Status in p11-kit source package in Xenial:
  Fix Committed

Bug description:
  Impact
  ==
  The Debian provided stub manpage is not very useful. Now that upstream 
includes manpages, we should build and ship those instead.

  This replaces p11-kit1. with the much more verbose and useful
  trust.1, pkcs11.conf.5 and p11-kit.8

  Test Case
  
  Run man p11-kit, man trust and man pkcs11.conf

  Regression Potential
  
  For yakkety, please sync p11-kit 0.23.2-5.

  For xenial, I am including a debdiff to backport the changes from
  0.23.2-4 and 0.23.2-5 with the exception of enabling all hardening
  flags since I think the SRU policy discourages making changes like
  that.

  0.23.2-4 updates the package descriptions in debian/control.

  Please sync p11-kit 0.23.2-5 (main) from Debian unstable (main)

  Changelog entries since current yakkety version 0.23.2-4:

  p11-kit (0.23.2-5) unstable; urgency=medium

* Build and ship upstream manpages. (Thanks, Julien Cristau)
  + Add b-d on gtk-doc-tools.
  + Pass --enable-doc to ./configure.
  + Drop minimal debian/p11-kit.1 manpage.
  Closes: #834992

   -- Andreas Metzler   Sun, 21 Aug 2016 16:03:45
  +0200

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/p11-kit/+bug/1615449/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1596381] Re: [X555UA, Realtek ALC256, Mic, Internal] No sound at all

** Changed in: alsa-driver (Ubuntu)
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1596381

Title:
  [X555UA, Realtek ALC256, Mic, Internal] No sound at all

Status in alsa-driver package in Ubuntu:
  Confirmed

Bug description:
  Internal mic doesn't work for Asus X555UA, Codec: Realtek ALC256

  speakers work, it's just the mic not working.

  sudo hda-verb /dev/snd/hwC0D0 0x1a SET_AMP_GAIN_MUTE 0x5003
  sudo hda-verb /dev/snd/hwC0D0 0x1a SET_AMP_GAIN_MUTE 0x6003
  sudo hda-verb /dev/snd/hwC0D0 0x23 SET_AMP_GAIN_MUTE 0x5200
  sudo hda-verb /dev/snd/hwC0D0 0x23 SET_AMP_GAIN_MUTE 0x6200
  sudo hda-verb /dev/snd/hwC0D0 0x08 SET_AMP_GAIN_MUTE 0x503f
  sudo hda-verb /dev/snd/hwC0D0 0x08 SET_AMP_GAIN_MUTE 0x603f
  sudo hda-verb /dev/snd/hwC0D0 0x08 SET_POWER_STATE 0
  sudo hda-verb /dev/snd/hwC0D0 0x1a SET_POWER_STATE 0

  8 lines make mic working until reboot.

  thx a lot for

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu5
  ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6
  Uname: Linux 4.4.0-21-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/pcmC0D0c:   ubuntu 1983 F...m pulseaudio
   /dev/snd/controlC0:  ubuntu 1983 F pulseaudio
  CasperVersion: 1.376
  CurrentDesktop: Unity
  Date: Sun Jun 26 23:56:46 2016
  LiveMediaBuild: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1)
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaRecordingTest: ALSA recording test through plughw:PCH failed
  Symptom_AlsaRecordingTestStderr: a r e c o r d :   p c m _ r e a d : 2 0 3 2 
:   r e a d   e r r o r :   I n p u t / o u t p u t   e r r o r
  Symptom_Card: Built-in Audio - HDA Intel PCH
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/pcmC0D0c:   ubuntu 1983 F...m pulseaudio
   /dev/snd/controlC0:  ubuntu 1983 F pulseaudio
  Symptom_Jack: Mic, Internal
  Symptom_Type: No sound at all
  Title: [X555UA, Realtek ALC256, Mic, Internal] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 01/23/2016
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: X555UA.206
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: X555UA
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: ATN12345678901234567
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrX555UA.206:bd01/23/2016:svnASUSTeKCOMPUTERINC.:pnX555UA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555UA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: X555UA
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1596381/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1358294] Re: App data and config files are not removed when an app is uninstalled

** Changed in: ubuntu-ux
 Assignee: John Lea (johnlea) => Paty Davila (dizzypaty)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to click in Ubuntu.
https://bugs.launchpad.net/bugs/1358294

Title:
  App data and config files are not removed when an app is uninstalled

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  New
Status in click package in Ubuntu:
  In Progress
Status in ubuntu-system-settings package in Ubuntu:
  Confirmed
Status in unity-scope-click package in Ubuntu:
  Triaged

Bug description:
  If an app uses ~/.config/foo (say, uses Qt.labs.settings), and the
  user uninstalls the app, ~/.config/foo is not removed. It should be
  deleted when the app is uninstalled.

  Using latest utopic on the phone.

  -
  Desired resolution:

  - When a user deletes an app, 100% of files associated with the app
  should be deleted.

  - A warning notification should be displayed when a user goes to
  delete an app informing them that this action will also delete any
  data they have stored inside the app.  This notification should give
  the options of cancelling or proceeding with the action.

  - Users should not be allowed to delete the key apps that ship with
  the phone.  These key apps are defined as: Dialler, Address book,
  Messaging, Browser, Camera, Music player

  The above will give the user a simple easy to understand mental model
  while simultaneously protecting the user from deleting important
  content within the default apps.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1358294/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1529117] Re: add the possibility to put a background in the scope of applications

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Paty Davila (dizzypaty)

** Changed in: ubuntu-ux
   Status: New => Triaged

** Changed in: ubuntu-ux
   Importance: Undecided => Wishlist

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1529117

Title:
  add the possibility to put a background in the scope of applications

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in unity8 package in Ubuntu:
  Incomplete

Bug description:
  add the possibility to put a background in the scope of applications

  or possibly any scope

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1529117/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1541588] Re: [System Settings] Changes needed for the UI on a tablet device

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-network in
Ubuntu.
https://bugs.launchpad.net/bugs/1541588

Title:
  [System Settings] Changes needed for the UI on a tablet device

Status in Canonical System Image:
  Fix Committed
Status in Ubuntu UX:
  Triaged
Status in indicator-network package in Ubuntu:
  Fix Released
Status in ubuntu-system-settings package in Ubuntu:
  Fix Released

Bug description:
  Note for design: can we simply avoid referring to the/this phone as in
  most uses its not necessary for clarity, and then the same text can
  always apply..

  Main panel:
  Hide Cellular
  Hide Hotspot
  Hide Phone
  About this phone -> About this device or just About
  Reset phone -> Reset device or just Reset

  Background
  Ensure default for images is landscape

  Sound:
  Hide Ringer, Phone Calls and Messages sections

  Security and Privacy
  Hide SIM PIN
  Locking and unlocking > Lock security "Unlock the phone using" --> "Unlock 
the device using"
  Locking and unlocking > Lock when idle  "Lock the phone when..." --> "Lock 
the device when ..."
  "Phone won't lock..." --> Device won't lock ..."

  About this device
  Hide IMEI
  Developer mode >  "this phone" --> "this device"

  A minor point but what happens when we search in settings for hidden
  stuff

  
  
  Note from design:

  - The text in the UI should never refer to "Phone", "Tablet" or
  "Desktop".  Instead the word "Device" should be used.

  - e.g. "About This Computer" or "About This Phone" is incorrect. This
  wording should be changed to "About this device" in both the indicator
  and System Settings to be convergence friendly.

  - This change applies to all device references in the UI.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1541588/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1358294] Re: App data and config files are not removed when an app is uninstalled

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to click in Ubuntu.
https://bugs.launchpad.net/bugs/1358294

Title:
  App data and config files are not removed when an app is uninstalled

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in click package in Ubuntu:
  In Progress
Status in ubuntu-system-settings package in Ubuntu:
  Confirmed
Status in unity-scope-click package in Ubuntu:
  Triaged

Bug description:
  If an app uses ~/.config/foo (say, uses Qt.labs.settings), and the
  user uninstalls the app, ~/.config/foo is not removed. It should be
  deleted when the app is uninstalled.

  Using latest utopic on the phone.

  -
  Desired resolution:

  - When a user deletes an app, 100% of files associated with the app
  should be deleted.

  - A warning notification should be displayed when a user goes to
  delete an app informing them that this action will also delete any
  data they have stored inside the app.  This notification should give
  the options of cancelling or proceeding with the action.

  - Users should not be allowed to delete the key apps that ship with
  the phone.  These key apps are defined as: Dialler, Address book,
  Messaging, Browser, Camera, Music player

  The above will give the user a simple easy to understand mental model
  while simultaneously protecting the user from deleting important
  content within the default apps.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1358294/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1313370] Re: Support for installing Digital Certificates

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1313370

Title:
  Support for installing Digital Certificates

Status in Oxide:
  New
Status in Ubuntu UX:
  Triaged
Status in webbrowser-app package in Ubuntu:
  Triaged

Bug description:
  I am trying to enter a page, and to me it is necessary to have in the
  digital certificate installed browser. Where is the option to install
  the digital certificate. Without that the browser is unusable.

To manage notifications about this bug go to:
https://bugs.launchpad.net/oxide/+bug/1313370/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1616968] Re: Emergency dialer wrongly sized (cut off at top)

2016-08-26 Thread Michał Sawicz

** Package changed: qtmir (Ubuntu) => qtubuntu (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1616968

Title:
  Emergency dialer wrongly sized (cut off at top)

Status in Canonical System Image:
  In Progress
Status in qtubuntu package in Ubuntu:
  Triaged

Bug description:
  The emergency dialer (lock phone, tap "emergency call") is cut off at
  the top, sized at panel-height too high.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: qtdeclarative5-qtmir-plugin 0.4.8+15.04.20160819-0ubuntu1
  Uname: Linux 3.4.67 armv7l
  ApportVersion: 2.17.2-0ubuntu1.3touch1
  Architecture: armhf
  Date: Thu Aug 25 15:20:10 2016
  InstallationDate: Installed on 2016-08-25 (0 days ago)
  InstallationMedia: Ubuntu 15.04 - armhf (20160825-020303)
  SourcePackage: qtmir
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1616968/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1616968] Re: Emergency dialer wrongly sized (cut off at top)

2016-08-26 Thread Michał Sawicz

Here the culprit is qtubuntu r332:

https://bazaar.launchpad.net/~phablet-team/qtubuntu/trunk/revision/332

** Description changed:

  The emergency dialer (lock phone, tap "emergency call") is cut off at
  the top, sized at panel-height too high.
+ 
+ Steps:
+ * have a locked phone
+ * make sure dialer isn't running
+ * swipe greeter away
+ * tap on "Emergency call"
+ 
+ Expected:
+ * emergency dialer shows fullscreen
+ 
+ Current:
+ * emergency dialer shows cut off at the top
  
  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: qtdeclarative5-qtmir-plugin 0.4.8+15.04.20160819-0ubuntu1
  Uname: Linux 3.4.67 armv7l
  ApportVersion: 2.17.2-0ubuntu1.3touch1
  Architecture: armhf
  Date: Thu Aug 25 15:20:10 2016
  InstallationDate: Installed on 2016-08-25 (0 days ago)
  InstallationMedia: Ubuntu 15.04 - armhf (20160825-020303)
  SourcePackage: qtmir
  UpgradeStatus: No upgrade log present (probably fresh install)

** Changed in: qtubuntu (Ubuntu)
   Status: Triaged => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1616968

Title:
  Emergency dialer wrongly sized (cut off at top)

Status in Canonical System Image:
  In Progress
Status in qtubuntu package in Ubuntu:
  In Progress

Bug description:
  The emergency dialer (lock phone, tap "emergency call") is cut off at
  the top, sized at panel-height too high.

  Steps:
  * have a locked phone
  * make sure dialer isn't running
  * swipe greeter away
  * tap on "Emergency call"

  Expected:
  * emergency dialer shows fullscreen

  Current:
  * emergency dialer shows cut off at the top

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: qtdeclarative5-qtmir-plugin 0.4.8+15.04.20160819-0ubuntu1
  Uname: Linux 3.4.67 armv7l
  ApportVersion: 2.17.2-0ubuntu1.3touch1
  Architecture: armhf
  Date: Thu Aug 25 15:20:10 2016
  InstallationDate: Installed on 2016-08-25 (0 days ago)
  InstallationMedia: Ubuntu 15.04 - armhf (20160825-020303)
  SourcePackage: qtmir
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1616968/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1616968] Re: Emergency dialer wrongly sized (cut off at top)

2016-08-26 Thread Michał Sawicz

** Attachment added: "screenshot20160826_102059651.png"
   
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1616968/+attachment/4728277/+files/screenshot20160826_102059651.png

** Changed in: qtubuntu (Ubuntu)
 Assignee: (unassigned) => Nick Dedekind (nick-dedekind)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1616968

Title:
  Emergency dialer wrongly sized (cut off at top)

Status in Canonical System Image:
  In Progress
Status in qtubuntu package in Ubuntu:
  In Progress

Bug description:
  The emergency dialer (lock phone, tap "emergency call") is cut off at
  the top, sized at panel-height too high.

  Steps:
  * have a locked phone
  * make sure dialer isn't running
  * swipe greeter away
  * tap on "Emergency call"

  Expected:
  * emergency dialer shows fullscreen

  Current:
  * emergency dialer shows cut off at the top

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: qtdeclarative5-qtmir-plugin 0.4.8+15.04.20160819-0ubuntu1
  Uname: Linux 3.4.67 armv7l
  ApportVersion: 2.17.2-0ubuntu1.3touch1
  Architecture: armhf
  Date: Thu Aug 25 15:20:10 2016
  InstallationDate: Installed on 2016-08-25 (0 days ago)
  InstallationMedia: Ubuntu 15.04 - armhf (20160825-020303)
  SourcePackage: qtmir
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1616968/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1615751] Re: ROOTDELAY= causes unnecessary delay in boot

2016-08-26 Thread Martin Pitt

** Changed in: initramfs-tools (Ubuntu Yakkety)
   Status: In Progress => Fix Committed

** Changed in: cloud-images
   Status: New => Fix Committed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1615751

Title:
  ROOTDELAY= causes unnecessary delay in boot

Status in cloud-images:
  Fix Committed
Status in initramfs-tools package in Ubuntu:
  Fix Committed
Status in initramfs-tools source package in Yakkety:
  Fix Committed

Bug description:
  I launched 2 different yakkety systems on azure instance types:
    Basic_A0
    Standard_D1_v2
  More information what those things are at :
    https://azure.microsoft.com/en-us/pricing/details/virtual-machines/linux/

  systemd-analize says:

  ## Basic A0
  smoser@sm-y-d1v2-1:~$ systemd-analyze
  Startup finished in 5min 8.172s (kernel) + 42.670s (userspace) = 5min 50.842s

  ## Standard D1 v2
  $ systemd-analyze
  Startup finished in 5min 13.347s (kernel) + 1min 31.532s (userspace) = 6min 
44.879s

  Systemd thinks that more than 5 minutes passed between the kernel
  being loaded and /sbin/init being run.  I'm pretty sure this isn't
  just a bad clock, as the system actually is not reachable for
  something like 6 minutes after boot, so it seems sane.  Additionally,
  I have some scripts that compare launch time and code ran inside the
  vm via cloud-init and they agree.

  For example:
    starting at Mon, 22 Aug 2016 15:37:43 +
    uptime: 349.77 seconds
    you launched me at: Mon, 22 Aug 2016 15:30:11 +
    it is now : Mon, 22 Aug 2016 15:37:43 +
    kernel booted : Mon, 22 Aug 2016 15:31:54 +
    launch to kernel boot: 103 seconds
    launch to user-data  : 452   seconds

  The full dmesg is attached, but interesting bits are
  [0.815692] Trying to unpack rootfs image as initramfs...
  [1.289093] Freeing initrd memory: 35660K (88001d47d000 - 
88001f75)
  ...
  [7.820798] input: TPPS/2 IBM TrackPoint as 
/devices/platform/i8042/serio1/input/input3
  [7.834419] input: AT Translated Set 2 keyboard as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/VMBUS:01/vmbus_5/serio2/input/input5
  [   72.464227] random: nonblocking pool is initialized
  [  305.527657] Btrfs loaded
  [  305.628091] blk_update_request: I/O error, dev fd0, sector 0
  [  305.632007] floppy: error -5 while reading block 0
  [  306.027898] EXT4-fs (sda1): mounted filesystem with ordered data mode. 
Opts: (null)
  [  308.901437] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT 
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS 
+ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  [  308.925746] systemd[1]: Detected virtualization microsoft.
  [  308.933658] systemd[1]: Detected architecture x86-64.
  [  308.999041] systemd[1]: Set hostname to .
  ...

  ProblemType: Bug
  DistroRelease: Ubuntu 16.10
  Package: linux-image-4.4.0-34-generic 4.4.0-34.53
  ProcVersionSignature: User Name 4.4.0-34.53-generic 4.4.15
  Uname: Linux 4.4.0-34-generic x86_64
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Aug 22 15:37 seq
   crw-rw 1 root audio 116, 33 Aug 22 15:37 timer
  AplayDevices: Error: [Errno 2] No such file or directory: 'aplay'
  ApportVersion: 2.20.3-0ubuntu7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord'
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  Date: Mon Aug 22 17:31:18 2016
  IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig'
  Lsusb: Error: command ['lsusb'] failed with exit code 1:
  MachineType: Microsoft Corporation Virtual Machine
  PciMultimedia:

  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 hyperv_fb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic 
root=UUID=314ea127-227e-4b64-b5b4-d70ab0fb7eb7 ro console=tty1 console=ttyS0 
earlyprintk=ttyS0 rootdelay=300
  RelatedPackageVersions:
   linux-restricted-modules-4.4.0-34-generic N/A
   linux-backports-modules-4.4.0-34-generic  N/A
   linux-firmware1.160
  RfKill: Error: [Errno 2] No such file or directory: 'rfkill'
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/23/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 090006
  dmi.board.name: Virtual Machine
  dmi.board.vendor: Microsoft Corporation
  dmi.board.version: 7.0
  dmi.chassis.asset.tag: 7783-7084-3265-9085-8269-3286-77
  dmi.chassis.type: 3
  dmi.chassis.vendor: Microsoft Corporation
  dmi.chassis.version: 7.0
  dmi.modalias:

[Touch-packages] [Bug 1611327] Re: Disabled ListItem inside ListView takes focus but does not show focus ring

2016-08-26 Thread Zsombor Egri

@Tim, @Femma: I guess you meant to scroll to the next enabled/disabled
item one by one, right?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1611327

Title:
  Disabled ListItem inside ListView takes focus but does not show focus
  ring

Status in Ubuntu UX:
  Fix Committed
Status in ubuntu-ui-toolkit package in Ubuntu:
  In Progress

Bug description:
  Items outside of a ListView are skipped when using keyboard navigation
  to change the focus. However, a ListItem inside a ListView takes the
  focus even when it is disabled, but it does not show the focus frame
  when focused.

  For example, execute this QML program:

  import QtQuick 2.4
  import Ubuntu.Components 1.3

  Item {
  width: units.gu(50)
  height: units.gu(50)

  ListView {
  anchors.fill: parent
  delegate: ListItem {
  enabled: index != 2
  Label {
  anchors.centerIn: parent
  text: parent.enabled ? "enabled" : "disabled"
  }
  }
  model: 5
  }
  }

  Press TAB to focus on the ListView. Then press the down-cursor-key
  twice to move the focus down inside the ListView. The focus will be on
  the disabled item, but not focus frame is visible This is confusing
  for the user since the focus seems to disappear, and the Item where
  the focus seems to be (although invisible) cannot be triggered because
  it is disabled.

  Note: When fixing this bug, also test the solution for Horizontal
  ListViews (and RightToLeft and BottomToTop directions), since I
  encountered this bug in the scrolling toolbar (in progress) that has a
  Horizontal, RightToLeft ListView.

  ==UX Fix===

  Bypass focus for a disabled item and show focus immediately for the
  next available enabled item.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1611327/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1607390] Re: serious bug on bluetooth (Ubuntu 16.04 LTS)

** Changed in: bluez (Ubuntu)
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1607390

Title:
  serious bug on bluetooth (Ubuntu 16.04 LTS)

Status in bluez package in Ubuntu:
  Confirmed

Bug description:
  I've recently installed ubuntu 16.04 LTS twice -and i discovered that
  the problem was from the tool katoolin so i didn't install it- after i
  installed ubuntu the bluetooth didn't work for me.

  P.S:the bluetooth was working when my laptop was ubuntu 15.04

  when i turn bluetooth on to connect my mouse the switch was on but it
  said that

  Bluetooth is disabled

  i entered the command

  sudo rfkill unblock bluetooth

  it worked but didn't connect to the mouse even after the next restart
  i also tried to editing the file /etc/rc.local (putting sudo rfkill unblock 
bluetooth before last line and restarting)

  and i've tried **sudo hciconfig hci0 reset** with output

  > Can't init device hci0: Connection timed out (110)

  my lsusb; rfkill list output:

  Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 001 Device 004: ID 1bcf:2883 Sunplus Innovation Technology Inc.
  Bus 001 Device 014: ID 04ca:3005 Lite-On Technology Corp.
  Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  Bus 003 Device 002: ID 04d9:1503 Holtek Semiconductor, Inc. Keyboard
  Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  0: asus-wlan: Wireless LAN
    Soft blocked: no
    Hard blocked: no
   1: asus-bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: no
   11: hci0: Bluetooth
    Soft blocked: no
   Hard blocked: no

  and output of **dmesg | grep -Ei 'ath3k|blue'**

  [1.727681] usb 1-1.1: Product: Bluetooth USB Host Controller
  [   34.157120] Bluetooth: Core ver 2.21
  [   34.157135] Bluetooth: HCI device and connection manager initialized
  [   34.157138] Bluetooth: HCI socket layer initialized
  [   34.157140] Bluetooth: L2CAP socket layer initialized
  [   34.157145] Bluetooth: SCO socket layer initialized
  [   35.604410] usbcore: registered new interface driver ath3k
  [   51.744300] usb 1-1.1: Product: Bluetooth USB Host Controller
  [   53.810045] Bluetooth: hci0 command 0x0c25 tx timeout
  [   55.814079] Bluetooth: hci0 command 0x0c38 tx timeout
  [   57.818111] Bluetooth: hci0 command 0x0c39 tx timeout
  [   59.822149] Bluetooth: hci0 command 0x0c05 tx timeout
  [   66.997548] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  [   66.997552] Bluetooth: BNEP filters: protocol multicast
  [   66.997556] Bluetooth: BNEP socket layer initialized
  [  195.105902] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  195.328480] Bluetooth: RFCOMM TTY layer initialized
  [  195.328488] Bluetooth: RFCOMM socket layer initialized
  [  195.328495] Bluetooth: RFCOMM ver 1.11
  [  199.131870] Bluetooth: hci0 command 0x1009 tx timeout
  [  276.169130] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  294.258992] Bluetooth: hci0 command 0x1005 tx timeout
  [  296.263065] Bluetooth: hci0 command 0x0c23 tx timeout
  [  298.267076] Bluetooth: hci0 command 0x0c14 tx timeout
  [  306.361529] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  346.417970] Bluetooth: hci0 command 0x0c56 tx timeout
  [  348.421916] Bluetooth: hci0 command 0x0c45 tx timeout
  [  350.425782] Bluetooth: hci0 command 0x0c58 tx timeout
  [  352.429744] Bluetooth: hci0 command 0x1004 tx timeout
  [  366.099802] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  368.145218] Bluetooth: hci0 command 0x1001 tx timeout
  [  370.149130] Bluetooth: hci0 command 0x1009 tx timeout
  [  410.346611] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  421.612041] Bluetooth: hci0 command 0x0c23 tx timeout
  [  423.616060] Bluetooth: hci0 command 0x0c14 tx timeout
  [  425.620018] Bluetooth: hci0 command 0x0c25 tx timeout
  [  427.623984] Bluetooth: hci0 command 0x0c38 tx timeout
  [  442.650168] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  444.727752] Bluetooth: hci0 command 0x0c52 tx timeout
  [  446.731800] Bluetooth: hci0 command 0x0c45 tx timeout
  [  448.735743] Bluetooth: hci0 command 0x0c58 tx timeout
  [  450.739762] Bluetooth: hci0 command 0x1004 tx timeout
  [ 4000.639722] usb 1-1.1: Product: Bluetooth USB Host Controller
  [ 4011.801141] Bluetooth: hci0 command 0x2002 tx timeout
  [ 4013.805106] Bluetooth: hci0 command 0x2003 tx timeout
  [

[Touch-packages] [Bug 1605189] Re: Authentication is required for suspending the system

** Changed in: systemd (Ubuntu)
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1605189

Title:
  Authentication is required for suspending the system

Status in systemd package in Ubuntu:
  Confirmed

Bug description:
  Automatic suspend from the xfce power manager does not work, as a
  window opens and asks for my password. Well, if it wants to suspend
  the system after a given timeout, I cannot enter my password as I'm
  not in front of my system then. Once I'm able to enter my password it
  is too late to run the suspend action.

  The window asking for my password prints:

  Password: 

  Details

  Action: org.freedesktop.login1.suspend
  Vendor: The systemd project

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: systemd 229-4ubuntu7
  ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13
  Uname: Linux 4.4.0-31-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Thu Jul 21 13:13:12 2016
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2014-08-17 (703 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  MachineType: LENOVO 4236ML1
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-31-generic 
root=/dev/mapper/ubuntu--vg-root ro intel_pstate=enable
  SourcePackage: systemd
  SystemdDelta:
   [EXTENDED]   /lib/systemd/system/systemd-timesyncd.service → 
/lib/systemd/system/systemd-timesyncd.service.d/disable-with-time-daemon.conf
   [EXTENDED]   /lib/systemd/system/rc-local.service → 
/lib/systemd/system/rc-local.service.d/debian.conf
   
   2 overridden configuration files found.
  UpgradeStatus: Upgraded to xenial on 2016-05-28 (53 days ago)
  dmi.bios.date: 07/05/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 83ET76WW (1.46 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 4236ML1
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr83ET76WW(1.46):bd07/05/2013:svnLENOVO:pn4236ML1:pvrThinkPadT420:rvnLENOVO:rn4236ML1:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 4236ML1
  dmi.product.version: ThinkPad T420
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1605189/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1595485] Re: packages to remove from yakkety

2016-08-26 Thread LocutusOfBorg

iva [i386]

** Also affects: iva (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: iva (Ubuntu)
   Status: New => Fix Released

** Changed in: fpc (Ubuntu)
   Status: Incomplete => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to libpng in Ubuntu.
https://bugs.launchpad.net/bugs/1595485

Title:
  packages to remove from yakkety

Status in flightgear package in Ubuntu:
  Invalid
Status in fpc package in Ubuntu:
  Fix Released
Status in fslview package in Ubuntu:
  Fix Released
Status in gnome-video-arcade package in Ubuntu:
  Fix Released
Status in insighttoolkit package in Ubuntu:
  Fix Released
Status in iva package in Ubuntu:
  Fix Released
Status in libpng package in Ubuntu:
  Fix Released
Status in mame package in Ubuntu:
  Fix Released
Status in pepperflashplugin-nonfree package in Ubuntu:
  Fix Released
Status in ppc64-diag package in Ubuntu:
  Fix Released
Status in python-pysam package in Ubuntu:
  Fix Released
Status in runit package in Ubuntu:
  Fix Released
Status in samtools package in Ubuntu:
  Fix Released
Status in simgear package in Ubuntu:
  Invalid
Status in singular package in Ubuntu:
  Fix Released
Status in stacks package in Ubuntu:
  Fix Released
Status in vcmi package in Ubuntu:
  Fix Released
Status in vmtk package in Ubuntu:
  Fix Released
Status in vtk package in Ubuntu:
  Fix Released
Status in fpc package in Debian:
  Fix Released

Bug description:
  (NOTE: all of them are gone from Debian)
  1) libpng.
  Superseded by libpng16

  no reverse dependencies I can see
  2) insighttoolkit
  Superseded by insighttoolkit4
  it doesn't build on powerpc, so we have to remove binaries here
  (sorry, but Debian maintains only amd64 and i386, and we can't maintain all 
the others including powerpc)

  just removing vmtk/powerpc should allow its removal too

  3) vtk
  Superseded by vtk6

  needs vmtk migration
  and fslview removal or demote to proposed.
  Debian broke it, because it is already broken, and it has little fix in time 
probability
  (probably we will remove in Debian soon)

  4) samtools
  old binaries left on armhf: libbam-dev, samtools (from 0.1.19-1ubuntu1)
  old binaries left on powerpc: libbam-dev, samtools (from 0.1.19-1ubuntu1)
  old binaries left on s390x: libbam-dev, samtools (from 0.1.19-1ubuntu1)

  removed in Debian too

  5) pepperflashplugin-nonfree [i386]
  please remove on i386 (removed in Debian too)
  upstream is not supporting it, so it can't be downloaded/installed on i386 
anymore

  6) singular [armhf]
  removed in Debian too

  7) fpc [powerpc]
  powerpc sadness with glib 2.23
  https://bugs.launchpad.net/ubuntu/+source/fpc/+bug/1562480

  8) mame [ppc64el]
  sandness on that arch, removed in Debian

  9) flightgear [armhf]
  I don't care about simgear/armhf, because it is unlikely for such a game to 
run on thar architecture.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/flightgear/+bug/1595485/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1608185] Re: dnsmasq uses many ports

2016-08-26 Thread johnmne

@Robie Basak (racb):

Thanks for your response and sorry I responded late.

I didn't know it wasn't a problem.
All I knew is that DNS port is 53.. so naturally I thought that something weird 
happens..

** Changed in: dnsmasq (Ubuntu)
   Status: Incomplete => New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dnsmasq in Ubuntu.
https://bugs.launchpad.net/bugs/1608185

Title:
  dnsmasq uses many ports

Status in dnsmasq package in Ubuntu:
  New

Bug description:
  The steps required to see that dnsmasq uses many ports are as follows:

1. Open the browser (e.g. Firefox)
2. Quickly open many websites on different tabs (3 websites are enough in 
my case)
3. The connection is slow, so it takes some time until it connects to the 
websites.
4. Before any connection to the website is made, execute:
  sudo netstat -veepa -n -W
   and the following ports will appear (some output was omitted for 
clarity):

  Proto Recv-Q Send-Q Local Address   Foreign Address State 
  User   Inode   PID/Program name
  tcp0  0 127.0.1.1:530.0.0.0:*   LISTEN
  0  44220   2983/dnsmasq
  udp0  0 0.0.0.0:75620.0.0.0:* 
  65534  47002   2983/dnsmasq
  udp0  0 0.0.0.0:48812   0.0.0.0:* 
  65534  48565   2983/dnsmasq
  udp0  0 0.0.0.0:20249   0.0.0.0:* 
  65534  46993   2983/dnsmasq
  udp0  0 0.0.0.0:41013   0.0.0.0:* 
  65534  46995   2983/dnsmasq
  udp0  0 127.0.1.1:530.0.0.0:* 
  0  44219   2983/dnsmasq
  udp0  0 0.0.0.0:57570   0.0.0.0:* 
  65534  49297   2983/dnsmasq
  udp0  0 0.0.0.0:20978   0.0.0.0:* 
  65534  48597   2983/dnsmasq
  udp0  0 0.0.0.0:17104   0.0.0.0:* 
  65534  48570   2983/dnsmasq
  udp0  0 0.0.0.0:48500.0.0.0:* 
  65534  46986   2983/dnsmasq
  udp0  0 0.0.0.0:62450   0.0.0.0:* 
  65534  48595   2983/dnsmasq
  udp0  0 0.0.0.0:10670.0.0.0:* 
  65534  46994   2983/dnsmasq
  udp0  0 0.0.0.0:13620   0.0.0.0:* 
  65534  47618   2983/dnsmasq
  udp0  0 0.0.0.0:97720.0.0.0:* 
  65534  47027   2983/dnsmasq
  udp0  0 0.0.0.0:54956   0.0.0.0:* 
  65534  48516   2983/dnsmasq
  udp0  0 0.0.0.0:38781   0.0.0.0:* 
  65534  48555   2983/dnsmasq
  udp0  0 0.0.0.0:30589   0.0.0.0:* 
  65534  46987   2983/dnsmasq
  udp0  0 0.0.0.0:30917   0.0.0.0:* 
  65534  47558   2983/dnsmasq

  The user 65534 is "nobody", By inspection of /etc/passwd:

  nobody:x:65534:65534:nobody:/nonexistent:/usr/sbin/nologin

  
  I'm using Dnsmasq version 2.68 on Ubuntu 14.04.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1608185/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1362962] Re: Calendar icon usually shows the wrong date

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Paty Davila (dizzypaty)

** Changed in: ubuntu-ux
   Importance: High => Wishlist

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-themes in Ubuntu.
https://bugs.launchpad.net/bugs/1362962

Title:
  Calendar icon usually shows the wrong date

Status in Canonical System Image:
  In Progress
Status in Ubuntu Calendar App:
  Invalid
Status in Ubuntu UX:
  New
Status in indicator-datetime package in Ubuntu:
  Confirmed
Status in ubuntu-themes package in Ubuntu:
  Confirmed
Status in unity-scope-click package in Ubuntu:
  Confirmed

Bug description:
  Problem occurs with: Ubuntu 14.10 r203
  Does not occur with: iOS, Windows Phone

  1. In the clock menu, find the calendar app and launch it.
  2. In the Launcher or Dash, find the Calendar app.

  What you see:
  1. The icon always says "25", regardless of the actual date.
  2. The icon always says "28", regardless of the actual date.

  What you should see:
  1. The icon shows the current date.
  2. The icon shows the current date.

  The equivalent for PC is bug 1362033, and for the Clock app is bug
  1362964.

  This depends on bug 1453795 for Unity letting an app change its own
  icon.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1362962/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1512430] Re: [phone] Shouldn't be able to swipe away incoming call notification

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Paty Davila (dizzypaty)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1512430

Title:
  [phone] Shouldn't be able to swipe away incoming call notification

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  New
Status in unity8 package in Ubuntu:
  Incomplete

Bug description:
  latest rc-proposed on krillin
   
  Steps to reproduce:
  1) lock phone
  2) call phone
  3) press volume down button to lower the volume, this causes sound 
notification to be shown and incoming call notification to be reduced in height
  4) while incoming call notification reduced in height, swipe it from left to 
right

  Expected results:
  incoming call notification should not be dismissed, so you can still answer 
the phone

  Actual results:
  incoming call notification is dismissed and you now have no way to answer the 
incoming call

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1512430/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1527560] Re: No way to edit existing bookmarks

** Changed in: ubuntu-ux
 Assignee: (unassigned) => James Mulholland (jamesmulholland)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1527560

Title:
  No way to edit existing bookmarks

Status in Ubuntu UX:
  Triaged
Status in webbrowser-app package in Ubuntu:
  Triaged

Bug description:
  The current UI (both narrow and wide modes) doesn’t allow editing
  existing bookmarks. One can delete existing bookmarks, and in wide
  mode one can drag a bookmark to another folder, but the URL/title of a
  bookmark cannot be changed. We need a UI for that.

  One concrete use case is lastpass bookmarklets (see bug #1506836 for
  details): lastpass provides a bogus URL which needs to be edited (to
  remove an 'android:lpfill?' token from the start) to create a valid
  bookmark.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1527560/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1588639] Re: Should display family name before given name in a contact

** Changed in: ubuntu-ux
 Assignee: John Lea (johnlea) => (unassigned)

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Femma (femma)

** Changed in: ubuntu-ux
   Status: Confirmed => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to address-book-app in
Ubuntu.
https://bugs.launchpad.net/bugs/1588639

Title:
  Should display family name before given name in a contact

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in address-book-app package in Ubuntu:
  Confirmed

Bug description:
  Test Env:
  current build number: 326
  device name: arale
  channel: ubuntu-touch/rc-proposed/meizu.zh
  last update: 2016-06-03 12:45:19
  version version: 326
  version ubuntu: 20160603
  version device: 20160523-003fdb2
  version custom: 20160504-975-22-7

  1.Launch contacts app
  2.Create a new contact
  3.Add given name and family name
  4.Save the contact and check the list

  Actual result:
  The given name displayed in front of family name

  Expected result:
  In China, it should display family name first

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1588639/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1354374] Re: [wm] foreground app not unfocused when indicators open

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Paty Davila (dizzypaty)

** Changed in: ubuntu-ux
   Status: New => Triaged

** Changed in: ubuntu-ux
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1354374

Title:
  [wm] foreground app not unfocused when indicators open

Status in Ubuntu UX:
  Triaged
Status in unity8 package in Ubuntu:
  Triaged

Bug description:
  Open a game like dropping letters. Start a game playing. Now open the
  indicators bar. Game keeps playing even while obscured by the
  indicators.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1354374/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1362962] Re: Calendar icon usually shows the wrong date

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-themes in Ubuntu.
https://bugs.launchpad.net/bugs/1362962

Title:
  Calendar icon usually shows the wrong date

Status in Canonical System Image:
  In Progress
Status in Ubuntu Calendar App:
  Invalid
Status in Ubuntu UX:
  Triaged
Status in indicator-datetime package in Ubuntu:
  Confirmed
Status in ubuntu-themes package in Ubuntu:
  Confirmed
Status in unity-scope-click package in Ubuntu:
  Confirmed

Bug description:
  Problem occurs with: Ubuntu 14.10 r203
  Does not occur with: iOS, Windows Phone

  1. In the clock menu, find the calendar app and launch it.
  2. In the Launcher or Dash, find the Calendar app.

  What you see:
  1. The icon always says "25", regardless of the actual date.
  2. The icon always says "28", regardless of the actual date.

  What you should see:
  1. The icon shows the current date.
  2. The icon shows the current date.

  The equivalent for PC is bug 1362033, and for the Clock app is bug
  1362964.

  This depends on bug 1453795 for Unity letting an app change its own
  icon.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1362962/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1358050] Re: Some icons assume familiarity with other OS

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Matthieu James (tiheum)

** Changed in: ubuntu-ux
   Status: New => Triaged

** Changed in: ubuntu-ux
   Importance: Undecided => Low

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-themes in Ubuntu.
https://bugs.launchpad.net/bugs/1358050

Title:
  Some icons assume familiarity with other OS

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in ubuntu-themes package in Ubuntu:
  Confirmed

Bug description:
  Attached is a comparison between Windows, Android, iOS(6) and
  tentative Ubuntu icons. The first 3 application icons bare a striking
  similarity to  the IOS(6) equivalent while the last to Google Maps.

  The browser icon assumes familiarity with Safari, or possibly Webkit.
  A user unfamiliar with them may see a compass and map and assume a
  map.

  The bigger issue being that the icons are so close to the iOS/Google
  ones that it may give the appearance of Ubuntu being a cheap knockoff,
  or worse, be vulnerable to a lawsuit. Apple has sued Samsung over a
  similar situation before.

  There are other ways of communicating those apps, which is shown in
  the Alternate column. These are not meant to be replacements, I'm no
  designer. They are merely illustrations of a different concept for the
  icons so as to not be too similar to Apple and Google's offereing:

  Browser:
  What was wrong with the earlier globe version?

  Calculator:
  Why not a "divide by" button rather than "equal", make all buttons an Ubuntu 
orange squircle?

  Contacts:
  How about a rolodex? Yes people won't be familiar with them, but if they see 
a contact and information that should be enough

  Maps:
  A treasure map would be a very different way of going about it.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1358050/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1300210] Re: Google calendar events with video don't show link in event

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Paty Davila (dizzypaty)

** Changed in: ubuntu-ux
 Assignee: Paty Davila (dizzypaty) => (unassigned)

** Changed in: ubuntu-ux
 Assignee: (unassigned) => James Mulholland (jamesmulholland)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtorganizer5-eds in
Ubuntu.
https://bugs.launchpad.net/bugs/1300210

Title:
  Google calendar events with video don't show link in event

Status in Ubuntu Calendar App:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in qtorganizer5-eds package in Ubuntu:
  New

Bug description:
  In a google calendar event it's possible to have a video call link. 
  The video call link appears in the web based view of the details of a call, 
but doesn't show in the calendar app.
  The link should appear and should be clickable so that if a user is running 
the calendar app on their desktop they can click the link to join the video 
chat it should open the default browser.

  See screenshot.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-calendar-app/+bug/1300210/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1530376] Re: On desktop, target="_blank" link should open new windows, not background tabs

** Changed in: ubuntu-ux
 Assignee: (unassigned) => James Mulholland (jamesmulholland)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1530376

Title:
  On desktop, target="_blank" link should open new windows, not
  background tabs

Status in Ubuntu UX:
  Triaged
Status in webbrowser-app package in Ubuntu:
  In Progress

Bug description:
  In webbrowser-app, when you share a web page using the "share buttons", you 
get the wrong tab: you remain on the same tab instead being on the new tab.
  You can reproduce the bug every time, e.g.:
  1) open the link 
http://arstechnica.com/science/2015/12/space-for-europe-and-for-all-humankind-a-brief-history-of-the-esa/
  2) click on the "social button Twitter" (see attacchment "1")
  3) the webbrowser-app opens a new tab, but you remain on the first one (see 
"2")
  4) if you click on the first tab, you refresh it so you can see the page (see 
"3")
  5) if you click on the second tab, you can see the right page, and you can 
share the link (see "4")

  Happens with webbrowser-app 0.23+15.10.20150929-0ubuntu1 on Ubuntu
  15.10 desktop and Ubuntu Phone OTA 8.5.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1530376/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1528198] Re: Need a dropdown component to work with TextField (Combo box)

** Changed in: ubuntu-ux
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1528198

Title:
  Need a dropdown component to work with TextField (Combo box)

Status in Ubuntu UX:
  Triaged
Status in ubuntu-ui-toolkit package in Ubuntu:
  New

Bug description:
  It's a common pattern to display matching entries or history in a
  drop-down below a TextField, there should be a component for that.

  It is commonly known as a "Combo box"
  https://en.wikipedia.org/wiki/Combo_box

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1528198/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1428775] Re: [SDK] On Long Press in the Text Area, Screen should be magnified to allow precise positioning

** Changed in: ubuntu-ux
   Importance: Undecided => Wishlist

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1428775

Title:
  [SDK] On Long Press in the Text Area, Screen should be magnified to
  allow precise positioning

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in ubuntu-ui-toolkit package in Ubuntu:
  Triaged

Bug description:
  On long press, the user can drag the handle and the whole UI & text
  zooms in 1.5x to allow easier positioning of the handle.

  
https://www.dropbox.com/s/8wt10uf0pmzizrd/050315_Convergence%20-%20Text%20selection_gv.pdf?dl=0

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1428775/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1534108] Re: [browser] "No Downloads available" message is confusing in picker mode

** Changed in: ubuntu-ux
 Assignee: (unassigned) => James Mulholland (jamesmulholland)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1534108

Title:
  [browser] "No Downloads available" message is confusing in picker mode

Status in Ubuntu UX:
  Triaged
Status in webbrowser-app package in Ubuntu:
  Triaged

Bug description:
  (originally reported in bug #1528651)

  When picking a file, if selecting the browser as a content source, the
  downloads view is shown with checkboxes in front of downloads to
  select which files to upload. If the input widget specifies an
  "accept" attribute to filter in only a certain set of file types, and
  if the downloads folder doesn’t have any matching file, the user is
  greeted with this message:

  "No Downloads available"

  This may be confusing, as there may be actual downloads in the folder,
  even though none matches the accept attribute.

  As a concrete example, if the download views has e.g. PDF documents
  but no images and the user visits
  https://www.wufoo.com/html5/attributes/07-accept.html (which accepts
  only images), the view will be empty, but the message implies that
  this is because there are no downloads at all.

  I would suggest a different message in that case, something like:

  "No Downloads matching the expected file type(s)"

  or

  "No Downloads matching the expected content type(s)"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1534108/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1535335] Re: [Camera app] Change prompt "wants to record audio" to "wants to access microphone"

** Summary changed:

- Change prompt "wants to record audio" to "wants to access microphone"
+ [Camera app] Change prompt "wants to record audio" to "wants to access 
microphone"

** Summary changed:

- [Camera app] Change prompt "wants to record audio" to "wants to access 
microphone"
+ [App permissions] Change prompt "wants to record audio" to "wants to access 
microphone"

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Matthew Paul Thomas (mpt)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1535335

Title:
  [App permissions] Change prompt "wants to record audio" to "wants to
  access microphone"

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  The prompt when the camera wants to access the hardware to record
  audio is currently "wants to record audio". This is not really
  accurate since an app can request access to the microphone without
  actually recording anything. furthermore the direct translation to
  French as an example is not really meaningful.

  
  Something like "wants to access the microphone." would be more accurate since 
it's actually what the application requests access to.

  "Microphone" is also consistent with the word used in system-
  settings/security & privacy/app permissions

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1535335/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1534239] Re: bottom edge tab selector doesn't work with mouse

** Changed in: ubuntu-ux
   Status: Triaged => Fix Committed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1534239

Title:
  bottom edge tab selector doesn't work with mouse

Status in Canonical System Image:
  Fix Committed
Status in Canonical Pocket Desktop:
  Fix Committed
Status in Ubuntu UX:
  Fix Committed
Status in webbrowser-app package in Ubuntu:
  Fix Released

Bug description:
  if you connect a mouse and the browser is in single column mode, there
  is no way to interact with the bottom edge to view/switch to other
  tabs. I expected to be able to click on the hint to open it, or at
  least be able to click and drag with mouse but neither succeeded.

  We should look at using the BottomEdgeHint component in the sdk as
  that correctly deals with handle mouse events and making the hint
  visible when a mouse is connected to see if that could be a
  possibility.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1534239/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1534843] Re: Drop down in tabs drawer has a slight vertical offset

** Changed in: ubuntu-ux
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1534843

Title:
  Drop down in tabs drawer has a slight vertical offset

Status in Ubuntu Music App:
  New
Status in Ubuntu UX:
  Triaged
Status in ubuntu-ui-toolkit package in Ubuntu:
  Incomplete

Bug description:
  Very minor but doesn't look designed, will add a screenie--under the
  "Albums" label.  Depends on the scrolling state, roll-down state of
  header.

To manage notifications about this bug go to:
https://bugs.launchpad.net/music-app/+bug/1534843/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1358050] Re: Some icons assume familiarity with other OS

2016-08-26 Thread Andrea Bernabei

Hi Alan, 
we're trying to clear the backlog of unassigned bugs that affect Ubuntu-UX, 
please bear with us as we go through them and try to improve the situation.

The designer working on this has just been assigned to this bug. I'm
sure he will provide more information when he gets to it ;)

Contributions are always very welcome, as far as I can tell :)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-themes in Ubuntu.
https://bugs.launchpad.net/bugs/1358050

Title:
  Some icons assume familiarity with other OS

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in ubuntu-themes package in Ubuntu:
  Confirmed

Bug description:
  Attached is a comparison between Windows, Android, iOS(6) and
  tentative Ubuntu icons. The first 3 application icons bare a striking
  similarity to  the IOS(6) equivalent while the last to Google Maps.

  The browser icon assumes familiarity with Safari, or possibly Webkit.
  A user unfamiliar with them may see a compass and map and assume a
  map.

  The bigger issue being that the icons are so close to the iOS/Google
  ones that it may give the appearance of Ubuntu being a cheap knockoff,
  or worse, be vulnerable to a lawsuit. Apple has sued Samsung over a
  similar situation before.

  There are other ways of communicating those apps, which is shown in
  the Alternate column. These are not meant to be replacements, I'm no
  designer. They are merely illustrations of a different concept for the
  icons so as to not be too similar to Apple and Google's offereing:

  Browser:
  What was wrong with the earlier globe version?

  Calculator:
  Why not a "divide by" button rather than "equal", make all buttons an Ubuntu 
orange squircle?

  Contacts:
  How about a rolodex? Yes people won't be familiar with them, but if they see 
a contact and information that should be enough

  Maps:
  A treasure map would be a very different way of going about it.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1358050/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1577596] Re: ntpd not started when using ntpdate

2016-08-26 Thread Trent Lloyd

** Tags added: sts

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ntp in Ubuntu.
https://bugs.launchpad.net/bugs/1577596

Title:
  ntpd not started when using ntpdate

Status in init-system-helpers package in Ubuntu:
  Confirmed
Status in ntp package in Ubuntu:
  Confirmed

Bug description:
  After updating from 14.04 to 16.04 on a number of my systems, ntpd no
  longer starts at boot on any of those systems.

  `systemctl status ntp` shows:
 ntp.service - LSB: Start NTP daemon
 Loaded: loaded (/etc/init.d/ntp; bad; vendor preset: enabled)
 Active: inactive (dead)
   Docs: man:systemd-sysv-generator(8)
  May 02 19:10:14 host systemd[1]: Stopped LSB: Start NTP daemon.
  May 02 19:10:17 host systemd[1]: Stopped LSB: Start NTP daemon.

  Manually starting it using `systemctl start ntp` works fine.  However,
  systemd does not seem to want to start it automatically at boot time.


  As best as I can tell based on trial and error, there is something
  special about the combination of the service being named "ntp.service"
  and the service depending on network.target.  However, I haven't been
  able to identify exactly what is causing this.

  If I copy the init script to any other name, everything works fine:
  cp /etc/init.d/ntp /etc/init.d/ntpd
  Edit /etc/init.d/ntpd and change "Provides: ntp" to "Provides: ntpd"
  systemctl enable ntpd
  # After a reboot, ntpd.service is started, but ntp.service is not.

  If I remove "$network" from the "# Required-Start: $network $remote_fs
  $syslog" line in /etc/init.d/ntp, then systemd starts it automatically
  ... But of course it is started before the network comes up, so it
  fails.

  If I replace /etc/init.d/ntp with a file containing only the following, 
systemd won't try to start it automatically at boot:
  #!/bin/sh
  ### BEGIN INIT INFO
  # Provides: ntp
  # Required-Start: $network
  # Required-Stop: $network
  # Default-Start: 2 3 4 5
  # Default-Stop: 1
  # Short-Description: Start NTP daemon
  ### END INIT INFO
  echo "script was run" >> /ntp.log

  If I rename that same dummy script to /etc/init.d/ntp2, it is started
  automatically at boot.

  However, grepping the systemd source code and my systemd config files for ntp 
doesn't seem to find anything that might cause this behavior:
  /etc/systemd# grep -iR ntp *
  timesyncd.conf:#NTP=
  timesyncd.conf:#FallbackNTP=ntp.ubuntu.com
  /lib/systemd# grep -R ntp *
  
system/systemd-timesyncd.service.d/disable-with-time-daemon.conf:ConditionFileIsExecutable=!/usr/sbin/ntpd
  
system/systemd-timesyncd.service.d/disable-with-time-daemon.conf:ConditionFileIsExecutable=!/usr/sbin/openntpd
  Binary file systemd-networkd matches
  Binary file systemd-timedated matches
  Binary file systemd-timesyncd matches

  What else can I do to debug this further?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/init-system-helpers/+bug/1577596/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1276066] Re: Checkbox needs 'unknown' state

** Changed in: ubuntu-ux
   Status: Confirmed => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1276066

Title:
  Checkbox needs 'unknown' state

Status in Ubuntu UI Toolkit:
  Incomplete
Status in Ubuntu UX:
  Triaged
Status in ubuntu-ui-toolkit package in Ubuntu:
  Incomplete

Bug description:
  The Checkbox component always animates its state transitions.
  Sometimes, the "checked" property is set shortly after initialization,
  which shows the animation when creating a page. For example, this
  happens when using the GSettings object, which fills in its properties
  in its componentCompleted:

  GSettings {
  id: settings
  schema.id: "com.ubuntu.touch.system"
  }

  CheckBox {
  checked: settings.autoBrightness
  }

  It would be nice if there was a property "animate" which could be used
  to suppress animations while loading a page.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ui-toolkit/+bug/1276066/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1594281] Re: Can't override overflow menu delegate in ActionBar

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1594281

Title:
  Can't override overflow menu delegate in ActionBar

Status in Ubuntu UX:
  Triaged
Status in ubuntu-ui-toolkit package in Ubuntu:
  Confirmed

Bug description:
  I'm looking to implement an overflow menu with headers and selected
  items, as used in Dekko and Telegram. For that I need to override the
  delegate of the leadingActionBar - otherwise I'd have to replace the
  whole menu.

  As far as possible we should also aim to implement headers and selected state 
in the menu item default delegate, exclusive action groups will help with that.
  That also needs design input.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1594281/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1602690] Re: Increase focus frame line weight to 2dp

** Changed in: ubuntu-ux
   Status: Confirmed => Triaged

** Changed in: ubuntu-ux
   Status: Triaged => Fix Committed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1602690

Title:
  Increase focus frame line weight to 2dp

Status in Canonical System Image:
  Fix Committed
Status in Ubuntu UX:
  Fix Committed
Status in ubuntu-ui-toolkit package in Ubuntu:
  Fix Released
Status in ubuntu-ui-toolkit package in Ubuntu RTM:
  Fix Released

Bug description:
  After reviewing the focus frame recently can we increase the line
  weight to 2dp.

  This applies to the focus frame:
  src/Ubuntu/Components/Themes/Ambiance/1.3/FocusShape.qml:29

  And the list item frame:
  src/Ubuntu/UbuntuToolkit/uclistitem.cpp:1130 
(src/Ubuntu/Components/plugin/uclistitem.cpp:1132)

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1602690/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1572880] Re: Cannot call emergency number from sim lock screen if phone screen is unlocked before

** Changed in: ubuntu-ux
 Assignee: John Lea (johnlea) => (unassigned)

** Changed in: ubuntu-ux
 Assignee: (unassigned) => Femma (femma)

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dialer-app in Ubuntu.
https://bugs.launchpad.net/bugs/1572880

Title:
  Cannot call emergency number from sim lock screen if phone screen is
  unlocked before

Status in Canonical System Image:
  Fix Released
Status in Ubuntu UX:
  Triaged
Status in dialer-app package in Ubuntu:
  Fix Released

Bug description:
  current build number: 4
  device name: turbo
  channel: ubuntu-touch/rc/meizu.en
  last update: 2016-04-19 10:38:50
  version version: 4
  version ubuntu: 20160418
  version device: 20160412-d272a77,

  Steps:
  1.Turn on sim pin
  2.Reboot the device
  3.Don't unlock the SIM but unlock phone screen
  4.Swipe down the indicator and select network section
  5.Tap on "Unlock sim" to bring up sim lock screen
  6.Tap on "Emergency Call" button
  7.Enter an emergency number and call

  Actual result:
  At step6, it shows regular dial pad with SIM locked header
  At step7, "SIM card is locked" dialog appears

  Expected result:
  At step6, it shows emergency dial pad with emergency header
  At step7, be able to make an emergency call

  Error also can be reproduced with krillin and arale.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1572880/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1560086] Re: cannot download files with no destination app from webapps

** Changed in: ubuntu-ux
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1560086

Title:
  cannot download files with no destination app from webapps

Status in Canonical System Image:
  Confirmed
Status in Ubuntu UX:
  Triaged
Status in The Webapps-core project:
  New
Status in webapps-sprint:
  In Progress
Status in webbrowser-app package in Ubuntu:
  In Progress

Bug description:
  Using the webbrowser-app I can download any file, and will be prompted
  to open in an app (if apps that support that content-type exist on the
  system) or to download the file in the browser. The same behavior
  should be available webapps but is not.

  Steps to reproduce:
  - Open Gmail webapp
  - Open a message that has an attachment of a file of unsupported type (like a 
.tar, .click, etc)
  - click on the file to download

  Expected results:
  - I should be prompted to open the file in supported app or to download
  - If I choose download the file should be downloaded into ~/Downloads by the 
webbrowser-app

  Actual results:
  - I am told that no apps exist to support this type of file and am not 
allowed to download it

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1560086/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1612579] Re: ActionSelectionPopover hides disabled Actions

** Changed in: ubuntu-ux
   Status: Confirmed => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1612579

Title:
  ActionSelectionPopover hides disabled Actions

Status in Ubuntu UX:
  Triaged
Status in ubuntu-ui-toolkit package in Ubuntu:
  Confirmed

Bug description:
  Disabled actions should be greyed-out, not hidden.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1612579/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1561668] Re: The reason for using backgroundTertiaryText in SectionsStyle is unclear.

** Changed in: ubuntu-ux
   Status: Confirmed => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1561668

Title:
  The reason for using backgroundTertiaryText in SectionsStyle is
  unclear.

Status in Ubuntu UX:
  Triaged
Status in ubuntu-ui-toolkit package in Ubuntu:
  Confirmed

Bug description:
  Looking at SectionStyle.qml [1], it seems the section headers use
  theme.palette.selected.backgroundTertiaryText to set the color. As I
  understand backgroundText, backgroundSecondaryText and
  backgroundTertiaryText are used to denote levels. The page sections
  have only 1 label and thereby should use
  theme.palette.selected.backgroundText instead.

  On talking to timp, he did make me understand that the main page
  header uses backgroundText while the section headers uses tertiaryText
  which does make sense. But that is something other app devs won't
  think of. May be the solution is to show a visual illustration where
  each SDK component shows what palette color it is using.

  Do note that this is not about which set (normal, disabled, selected,
  highlighted) to use, but rather the actual palette value.

  [1] http://bazaar.launchpad.net/~ubuntu-sdk-team/ubuntu-ui-
  
toolkit/staging/view/head:/src/Ubuntu/Components/Themes/Ambiance/1.3/SectionsStyle.qml

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1561668/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1469220] Re: [dialer] Dialer should allow me to block nuisance calls

** Changed in: ubuntu-ux
Status: Confirmed => Triaged

--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dialer-app in Ubuntu.
https://bugs.launchpad.net/bugs/1469220

Title:
[dialer] Dialer should allow me to block nuisance calls

Status in Ubuntu UX:
Triaged
Status in dialer-app package in Ubuntu:
Confirmed

Bug description:
Title says it all. I have a very old number and get a lot of
businesses trying to get my custom (by annoying me, ironically). I had
them block on my last phone but I'm getting them again. Please
implement this.

The messages app equivalent is bug 1469535.

--- UX comment & resolution ---

To block a number:

1. Open dialer
2. Carry out a bottom edge swipe to access your Recent calls
3. Swipe towards the left on the entry/number you would like to block
4. tap the Info icon
5. see the revealed details about the caller and select the BLOCK option at
the bottom of the page

Please refer to the latest UX spec here:
https://docs.google.com/document/d/1BRy9
-DEXr3A1D7PHkJaXmjbe7xbRmxKkzANXuu-F6lc/edit

Please refer to the latest visual spec here:

https://docs.google.com/presentation/d/1XMHRg7T3KxMizExeRTmXJGar0WOUyBQ4A8lEMnQvcqA/edit#slide=id.g34bd6a2bc_417

Visuals attached to bug

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1469220/+subscriptions

--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1499879] Re: Moonphase could not be read