[Bug 296327] Re: smb:/// No application is registered as handling this file
*** This bug is a duplicate of bug 305030 *** https://bugs.launchpad.net/bugs/305030 Do you think your present problem is the cause of that bug in Evince? I don't expect so. The problem you mention in the report is an intended behavior and has nothing to do with bug 305030 which comes from GTK+. ** This bug has been marked a duplicate of bug 305030 Failed to print document - can't prompt for authorization -- smb:/// No application is registered as handling this file https://bugs.launchpad.net/bugs/296327 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 246322] Re: nis package must provide DHCP client scripts
You're missing the point with laptops and so on: these are use cases that are already supported and can be broken by a poor DHCP implementation. This is especially the case if your preferred implementation with overwriting the configuration file were done - the user configuration would be unconditionally deleted if they connected to the wrong network. Adding a DO NOT EDIT THIS FILE note doesn't really address the problem: it's not really compliant with policy (users should be able to do static configuration) and means that it becomes impossible to set any configuration which is not offered over DHCP. You should do something like have the DHCP configuration go in a separate file and source that from the main configuration file. -- nis package must provide DHCP client scripts https://bugs.launchpad.net/bugs/246322 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to dhcp3 in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 312449] [NEW] package samba-common 2:3.2.3-1ubuntu3.3 failed to install/upgrade: subprocess post-installation script returned error exit status 1
Public bug reported: Binary package hint: samba this happen when smb.conf file not exist ! ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 8.10 ErrorMessage: subprocess post-installation script returned error exit status 1 NonfreeKernelModules: nvidia Package: samba-common 2:3.2.3-1ubuntu3.3 SourcePackage: samba Title: package samba-common 2:3.2.3-1ubuntu3.3 failed to install/upgrade: subprocess post-installation script returned error exit status 1 Uname: Linux 2.6.27-9-generic i686 ** Affects: samba (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- package samba-common 2:3.2.3-1ubuntu3.3 failed to install/upgrade: subprocess post-installation script returned error exit status 1 https://bugs.launchpad.net/bugs/312449 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 81264] Re: libpam-ldap manpage refers to ldap.conf instead of pam_ldap.conf
*** This bug is a duplicate of bug 17744 *** https://bugs.launchpad.net/bugs/17744 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug 17744, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. BugSquad ** This bug has been marked a duplicate of bug 17744 libnss-ldap and libpam-ldap should use the same configuration file -- libpam-ldap manpage refers to ldap.conf instead of pam_ldap.conf https://bugs.launchpad.net/bugs/81264 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to libpam-ldap in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 312648] [NEW] package samba 2:3.2.3-1ubuntu3.3 failed to install/upgrade: subprocess new post-removal script returned error exit status 132
Public bug reported: Binary package hint: samba I tried to set up shared folders through the Xubuntu UI (System Shared Folders). I was prompted to install NFS and/or SMB, so I chose both. A dependency problem with NFS was identified and it was left unconfigured. I decided I didn't need NFS so uninstalled both nfs-common and nfs- kernel-server through Synaptic. I could not get the Shared Folders application to allow me to set up SMB alone, so I went into Synaptic and tried to reinstall Samba. That reinstallation gave the current error. rich...@blackbox:~$ lsb_release -rd Description:Ubuntu 8.10 Release:8.10 rich...@blackbox:~$ apt-cache policy samba samba: Installed: 2:3.2.3-1ubuntu3.3 Candidate: 2:3.2.3-1ubuntu3.3 Version table: *** 2:3.2.3-1ubuntu3.3 0 500 http://gulus.usherbrooke.ca intrepid-updates/main Packages 500 http://gulus.usherbrooke.ca intrepid-security/main Packages 100 /var/lib/dpkg/status 2:3.2.3-1ubuntu3 0 500 http://gulus.usherbrooke.ca intrepid/main Packages rich...@blackbox:~$ ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 8.10 ErrorMessage: subprocess new post-removal script returned error exit status 132 NonfreeKernelModules: fglrx Package: samba 2:3.2.3-1ubuntu3.3 SourcePackage: samba Title: package samba 2:3.2.3-1ubuntu3.3 failed to install/upgrade: subprocess new post-removal script returned error exit status 132 Uname: Linux 2.6.27-11-generic i686 ** Affects: samba (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- package samba 2:3.2.3-1ubuntu3.3 failed to install/upgrade: subprocess new post-removal script returned error exit status 132 https://bugs.launchpad.net/bugs/312648 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 312648] Re: package samba 2:3.2.3-1ubuntu3.3 failed to install/upgrade: subprocess new post-removal script returned error exit status 132
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/20825823/Dependencies.txt ** Attachment added: DpkgTerminalLog.gz http://launchpadlibrarian.net/20825824/DpkgTerminalLog.gz -- package samba 2:3.2.3-1ubuntu3.3 failed to install/upgrade: subprocess new post-removal script returned error exit status 132 https://bugs.launchpad.net/bugs/312648 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 237604] Re: Ctrl-key stuck in Gnome after continued browsing
But now the bug's returned again. Too bad, because this one seemed to be a winner. -- Ctrl-key stuck in Gnome after continued browsing https://bugs.launchpad.net/bugs/237604 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 185208] Re: Ctrl+Alt keys stuck
I see. Unfortunately, the bug just returned, too, so hotkey-setup wasn't the culprit after all. Switching distros or OSes may be the only solution so far. -- Ctrl+Alt keys stuck https://bugs.launchpad.net/bugs/185208 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 179846] Re: rdesktop ctrl key gets stuck on randomly
No wait, it's back again. It just took a little longer than usual. The error messages are back, too. -- rdesktop ctrl key gets stuck on randomly https://bugs.launchpad.net/bugs/179846 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 124406] Re: Keyboard keys get stuck and repeat (Feisty, Gutsy)
Unfortunately, disabling hotkey-setup didn't fix the problem after all. The bug just took a long time to return this time. -- Keyboard keys get stuck and repeat (Feisty, Gutsy) https://bugs.launchpad.net/bugs/124406 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 309866] Re: PCX file format not supported
What program created the PCX file you have attached? I was able to open the file w/ GIMP and then resaved it as a PCX file and now everything else can read it. That seems odd, not entirely sure what's causing the issue yet. Random PCX files on the internet gThumb others seem to be able to open fine. -- PCX file format not supported https://bugs.launchpad.net/bugs/309866 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 200509] Re: iwl4965: Microcode SW error detected. Restarting 0x2000000
This effects me in Intrepid with backports updates enabled. I'll be in an online game, and suddenly I start lagging completely; its as if my wireless stopped uploading - I can't move or talk, but I can still see the game playing on without me for a bit of time. I'm not able to reconnect, or browse the internet for some time when this happens, unless I click the NetworkManager icon, and click my wireless network to reconnect to it (it still thinks I'm connected to it though). -- iwl4965: Microcode SW error detected. Restarting 0x200 https://bugs.launchpad.net/bugs/200509 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 228674] Re: Hardy - No preview icon when file extention is .mpeg
Hi I'm runnig 8.10, the preview icons work just fine. but I guess the bug can not be closed on 8.04 yet. -- Hardy - No preview icon when file extention is .mpeg https://bugs.launchpad.net/bugs/228674 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 294307] Re: Kubuntu 8.10 problems with sound
Ok - I think this was fixed with (sudo) asoundconf unset-pulseaudio (Meaning sudo apt-get remove pulseaudio does not unset pulseaudio ??) - - - However I first tried appending the following /etc/apt/sources.list # PulseAudio Fixes - http://ubuntuforums.org/showthread.php?t=789578 deb http://ppa.launchpad.net/psyke83/ubuntu intrepid main deb-src http://ppa.launchpad.net/psyke83/ubuntu intrepid main followed by apt-get update apt-get upgrade (But I did not get it to work) -- Kubuntu 8.10 problems with sound https://bugs.launchpad.net/bugs/294307 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 124704] Re: ccsm crashed with AttributeError in CheckActionConflicts()
This bug report is being closed as the crash originally reported no longer occurs with the latest Ubuntu release. If you are having a separate issue with kate, you should file a new bug report for it. Thanks for your report. ** Changed in: compizconfig-settings-manager (Ubuntu) Status: Incomplete = Invalid -- ccsm crashed with AttributeError in CheckActionConflicts() https://bugs.launchpad.net/bugs/124704 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 303720] Re: [g45] Black flashing screen after Ubuntu 8.10 installation in 1680x1050 resolution using p5q-em motherboards built in graphics card(g45 chipset).
I suspect this bug is a duplicate of bug #275152 -- [g45] Black flashing screen after Ubuntu 8.10 installation in 1680x1050 resolution using p5q-em motherboards built in graphics card(g45 chipset). https://bugs.launchpad.net/bugs/303720 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312389] [NEW] OpenOffice.org3.0 crashes during launch on Kubuntu
Public bug reported: Binary package hint: openoffice.org 1) The OpenOffice.org 3.0 crashes each time I try to open Writer or the main OpenOffice.org itself. The error that appears after the Document Recovery dialog box appears: QPainter::begin: A paint device can only be painted by one painter at a time. QPainter::setWorldTransform: Painter not active ASSERT: slOpt in file /build/buildd/kde4libs-4.1.3/kdeui/kernel/kstyle.cpp, line 3314 QPainter::begin: A paint device can only be painted by one painter at a time. QPainter::setWorldTransform: Painter not active But the next dialog box The following files will be recovered is blank. I have tried to delete the HOME/.openoffice.org directory but still the same result. 2) Some info on my system. $ lsb_release -rd Description:Ubuntu 8.10 Release:8.10 $ apt-cache policy openoffice.org openoffice.org: Installed: 1:3.0.0-6ubuntu0intrepid1 Candidate: 1:3.0.0-6ubuntu0intrepid1 Version table: *** 1:3.0.0-6ubuntu0intrepid1 0 500 http://ppa.launchpad.net intrepid/main Packages 100 /var/lib/dpkg/status 1:2.4.1-11ubuntu2.1 0 500 http://archive.ubuntu.com intrepid-updates/main Packages 500 http://archive.ubuntu.com intrepid-security/main Packages 1:2.4.1-11ubuntu2 0 500 http://archive.ubuntu.com intrepid/main Packages $ apt-cache policy sun-java6-jre sun-java6-jre: Installed: 6-10-0ubuntu2 Candidate: 6-10-0ubuntu2 Version table: *** 6-10-0ubuntu2 0 100 /var/lib/dpkg/status ** Affects: openoffice.org (Ubuntu) Importance: Undecided Status: New -- OpenOffice.org3.0 crashes during launch on Kubuntu https://bugs.launchpad.net/bugs/312389 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 102921] Re: Moving the mouse cursor over the gnome-system-monitor temporarily causes network and disk usage to become zero
What I don't understand is how it can say something like 50% network in use. If I'm on a 100MBps lan does that mean I am moving 50MBps. No, certainly not. It could be an issue of scaling the graph. Maybe when you mouse over the applet it looks back at what your capacity and usage is and makes the graph of that. So we would likely see near zero percent. Otherwise maybe it looks at peak traffic information and scales from there, 50% of peak network usage. I think my main question is how does it know how tall to make the graph of network usage given that I never have even approached 100% of my network's capacity. -- Moving the mouse cursor over the gnome-system-monitor temporarily causes network and disk usage to become zero https://bugs.launchpad.net/bugs/102921 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312391] [NEW] Evolution crashed on cahnge mail account settings
Public bug reported: Binary package hint: evolution Evolution crashed on cahnge mail account settings. If i hit OK button on Account Editor window the program exits without any message or etc. If i hit the Cancel button evolution runs perfectly. I use 2 IMAP (SSL) account. ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 8.10 ExecutablePath: /usr/bin/evolution Package: evolution 2.24.2-0ubuntu1 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: evolution Uname: Linux 2.6.27-9-generic i686 ** Affects: evolution (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- Evolution crashed on cahnge mail account settings https://bugs.launchpad.net/bugs/312391 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312391] Re: Evolution crashed on cahnge mail account settings
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/20808972/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/20808973/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/20808974/ProcStatus.txt -- Evolution crashed on cahnge mail account settings https://bugs.launchpad.net/bugs/312391 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312390] [NEW] no video recording with cheese 2.24.0 with targus camera model AVC05EU
Public bug reported: Binary package hint: cheese no video recording with cheese 2.24.0 with targus camera model AVC05EU ** Affects: cheese (Ubuntu) Importance: Undecided Status: New -- no video recording with cheese 2.24.0 with targus camera model AVC05EU https://bugs.launchpad.net/bugs/312390 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 288797] Re: [Intrepid] Synaptic unusable - Can not find packages
I had the same bug, and the sudo update-apt-xapian-index command fixed it. Fresh install of Ubuntu 8.10 from live CD on an HP laptop running on an AMD Turion 64. I also want to point out that when scrolling down in the list in synaptic I -could- find packages from multiverse and other non-standard repositories; and also found them using the full search tool. Only when using quick search did no results appear. -- [Intrepid] Synaptic unusable - Can not find packages https://bugs.launchpad.net/bugs/288797 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 267828] Re: switch user does not work
Same for me or my desktop. [GeForce2 MX/MX 400] with nvidia driver. Running 8.10 up to date. I upgraded from 8.04. Did not happen in 8.04. -- switch user does not work https://bugs.launchpad.net/bugs/267828 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286899] Re: Backport geany 0.15 to intrepid
Daniel, I agree this bug relies on 302107 in order to get fixed. BUT this does NOT mean that this one can't/ won't be fixed necessarily. So I leave it incomplete as there is no 'depends on' status available. ** Changed in: geany (Ubuntu) Status: Won't Fix = Incomplete -- Backport geany 0.15 to intrepid https://bugs.launchpad.net/bugs/286899 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 302107] Re: Please merge geany from Debian experimental
I highly agree and once the merge is done it would be nice if it could be backported to Intrepid too (see bug 286899). -- Please merge geany from Debian experimental https://bugs.launchpad.net/bugs/302107 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 310688] Re:problèmeupdate-manag er
Thank's for your help... Have an happy new year !!! Le lundi 22 décembre 2008 à 23:28 +, scientus a écrit : you need to edit your /etc/apt/sources.list file and remove duplicate entries (lines that are the same) -- problème update-manager https://bugs.launchpad.net/bugs/310688 You received this bug notification because you are a direct subscriber of the bug. Status in Ubuntu: New Bug description: Impossible d'initialiser les données sur les paquets Un problème insoluble est survenu pendant l'initialisation des informations du paquet. Veuillez signaler ce bogue du paquet « update-manager » en y joignant le message d'erreur suivant : 'W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid/main Packages (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid_main_binary-i386_Packages), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid/main Translation-fr (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid_main_i18n_Translation-fr), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid/restricted Packages (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid_restricted_binary-i386_Packages), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid/restricted Translation-fr (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid_restricted_i18n_Translation-fr), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid/universe Packages (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid_universe_binary-i386_Packages), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid/universe Translation-fr (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid_universe_i18n_Translation-fr), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid/multiverse Packages (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid_multiverse_binary-i386_Packages), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid/multiverse Translation-fr (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid_multiverse_i18n_Translation-fr), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid-updates/main Packages (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid-updates_main_binary-i386_Packages), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid-updates/main Translation-fr (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid-updates_main_i18n_Translation-fr), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid-updates/restricted Packages (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid-updates_restricted_binary-i386_Packages), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid-updates/restricted Translation-fr (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid-updates_restricted_i18n_Translation-fr), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid-updates/universe Packages (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid-updates_universe_binary-i386_Packages), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid-updates/universe Translation-fr (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid-updates_universe_i18n_Translation-fr), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid-updates/multiverse Packages (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid-updates_multiverse_binary-i386_Packages), W:Duplicate sources.list entry http://be.archive.ubuntu.com intrepid-updates/multiverse Translation-fr (/var/lib/apt/lists/be.archive.ubuntu.com_ubuntu_dists_intrepid-updates_multiverse_i18n_Translation-fr), W:Duplicate sources.list entry http://archive.canonical.com intrepid/partner Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_intrepid_partner_binary-i386_Packages), W:Duplicate sources.list entry http://security.ubuntu.com intrepid-security/main Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_intrepid-security_main_binary-i386_Packages), W:Duplicate sources.list entry http://security.ubuntu.com intrepid-security/restricted Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_intrepid-security_restricted_binary-i386_Packages), W:Duplicate sources.list entry http://security.ubuntu.com intrepid-security/main Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_intrepid-security_main_binary-i386_Packages), W:Duplicate sources.list entry http://security.ubuntu.com intrepid-security/restricted Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_intrepid-security_restricted_binary-i386_Packages), W:Duplicate sources.list entry http://security.ubuntu.com intrepid-security/universe Packages
[Bug 267963] Re: No sound Intrepid kernel 2.6.27-2 snd_hda_intel
I tried your fix and when I issue the command: sudo alsa force-reload I get this: lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/bob/.gvfs Output information may be incomplete. lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/bob/.gvfs Output information may be incomplete. Unloading ALSA sound driver modules: snd-hda-intel snd-pcm-oss snd-mixer-oss snd-pcm snd-seq-dummy snd-seq-oss snd-seq-midi snd-rawmidi snd-seq-midi-event snd-seq snd-timer snd-seq-device snd-page-alloc. Loading ALSA sound driver modules: snd-hda-intel snd-pcm-oss snd-mixer-oss snd-pcm snd-seq-dummy snd-seq-oss snd-seq-midi snd-rawmidi snd-seq-midi-event snd-seq snd-timer snd-seq-device snd-page-alloc. and still no sound. -- No sound Intrepid kernel 2.6.27-2 snd_hda_intel https://bugs.launchpad.net/bugs/267963 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 306190] Re: package xulrunner-1.9 1.9.0.4+nobinonly-0ubuntu0.8.10.1 failed to install/upgrade:
** Description changed: Binary package hint: xulrunner-1.9 Relative novice ubuntu user. A brand new install of ubuntu 8.1 to a Dell Precision Workstation 530MT dual intel xeon 1.7, 1 GB RAM (as per factory, but with ATI radeon X800GTO graphics card upgrade). Graphics card using default driver supplied with Ubuntu (not proprietary driver). After an hour or so, notified of upgrades available via icon on top right of screen... so Iclicked on this. Informed to run partial upgrade. Said OK. Informed subprocess post-installation script returned error exit status 2. Could not install 'xlrunner-1.9' package. Continued. At 1 minute to go, notified of crash see attached image Could not install the upgrades. The upgrade aborts now. Your system could be in an unusable state. A recovery will run now (dpkg --configure -a). After reboot, renotified of crash in xulrunner-1.9 and clicked button to report and ended up at this website with the summary already filled in. Not sure how to provide more information. Not sure if it is a bug, or some other problem. Reiterate, brand new install. I used CD with gparted to remove partitions, made one new partition ext3. Then rebooted and reinstalled from 8.1 CD (without running from CD first) ... followed all instructions. Used firefox, set up email. Didn't install any new packages. Then did partial upgrade. Now here. ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 8.10 ErrorMessage: ErrorMessage: subprocess post-installation script returned error exit status 2 Package: xulrunner-1.9 1.9.0.4+nobinonly-0ubuntu0.8.10.1 SourcePackage: xulrunner-1.9 Title: package xulrunner-1.9 1.9.0.4+nobinonly-0ubuntu0.8.10.1 failed to install/upgrade: Uname: Linux 2.6.27-9-generic i686 + + + Error message: E: /var/cache/apt/archives/xulrunner-1.9_1.9.0.5+nobinonly-0ubuntu0.8.10.1_i386.deb: corrupted filesystem tarfile - corrupted package archive -- package xulrunner-1.9 1.9.0.4+nobinonly-0ubuntu0.8.10.1 failed to install/upgrade: https://bugs.launchpad.net/bugs/306190 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312310] Re: Grub2 version within Jaunty needs to be updated.
Well... blkid or vol_id... does it matter ? https://bugs.launchpad.net/bugs/197311 I also noticed that there are no packages built within Debian experimental just the source. -- Grub2 version within Jaunty needs to be updated. https://bugs.launchpad.net/bugs/312310 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234498] Re: Cannot uninstall irmp3 from system
I can confirm this... I have exactly the same thing (subprocess new pre- removal script returned error) which re-occurs with each sypnaptic run. I reported it with [Bug 292046] 11/01/08 Michael Vogt asked for more information (11/03/08) ... which I forwarded. Jean-Baptiste Lallement closed the bug 11/22/2008 We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to New. Thanks again! ** Changed in: update-manager (Ubuntu) Status: Incomplete = Invalid Still, the funny thing is that a) the bug team got rid of 1 more bug (by closing it) b) the problem still persists on my PC c) I am not alone ;) d) there were no previous comments as mentioned above. Happy New Year everyone! -- Cannot uninstall irmp3 from system https://bugs.launchpad.net/bugs/234498 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312392] [NEW] Gnokii doesn't start
Public bug reported: Binary package hint: gnokii When I run the command gnokii --identify. It display following message: GNOKII VERSION 0.6.26 Couldn't read /home/kil/.gnokiirc confi file. Couldn't read /home/kil/.gnokiirc confi file. Gnokii serial_open: open: No such file or directory. Couldn't serial FBUS device: No such file or directory. Gnokii serial_open: open: No such file or directory. Couldn't serial FBUS device: No such file or directory. Telephone interface init failed: command failed. Quitting. Command failed. Please help me out. What to do.. ** Affects: gnokii (Ubuntu) Importance: Undecided Status: New -- Gnokii doesn't start https://bugs.launchpad.net/bugs/312392 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 279156] Re: Intrepid: Suspend not working on Asus A6Km
Are you sure you are using that kernel version? try: uname -r to see you current version. The reason I ask is that I am running 64 bit and 2.6.27-10 worked fine (and all subsequent versions). -- Intrepid: Suspend not working on Asus A6Km https://bugs.launchpad.net/bugs/279156 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 311544] Re: segfault during X startup with savage driver
you should send this upstream for a review, to bugs.freedesktop.org and/or x...@lists.fd.o -- segfault during X startup with savage driver https://bugs.launchpad.net/bugs/311544 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 303056] Re: Network Manager fails to bring up network in Intrepid
No, the /etc/network/interfaces file is the default:
{code}
auto lo
iface lo inet loopback
{code}
and has not been edited since the clean Hardy install.
The machine has just been switched on after it Christmas holiday and it
behaved exactly the same: the network is not started on boot, I have to
login and run dhclient (and also hostname) manually, then manually mount
the filestores. After that everything is fine.
--
Network Manager fails to bring up network in Intrepid
https://bugs.launchpad.net/bugs/303056
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 282376] Re: compiz window previews not displaying properly
I confirm this problem. When I make sleeping (computer stand-by) my IBM ThinkPad R51. On wake-up I have a problem with window previews like a screenshot above. compiz --replace repair this problem for a time... -- compiz window previews not displaying properly https://bugs.launchpad.net/bugs/282376 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 129391] Ranajoy's Birthday Calendar
Hi I'm setting up a birthday calendar and need your help. Just click on the link below and enter your birthday details. (It's quick, easy, and you can keep your age a secret.) http://www.birthdayalarm.com/bd2/83780038a476868531b1438508624c390437054d1386 Thanks Ranajoy -- cannot see image for some videos only audio https://bugs.launchpad.net/bugs/129391 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 269963] Re: [intrepid] network-manager should recommend or suggest dnsmasq
Plus nm-applet really shouldn't segfault because it can't find the binary. I was away from network connectivity (as you usually are when you try to ad-hoc, otherwise you'd just both connect to the infrastructure) when I tried this a couple of days ago. Thankfully we are both experienced sysadmins who were happy to go nuke the network-manager processes and iwconfig/ifconfig ourselves. Left a pretty sour taste seeing nm-applet crash and disappear. Dec 28 19:06:15 launde NetworkManager: WARN start_sharing(): (wlan0): failed to start dnsmasq: Could not find dnsmasq binary. I ran nm-applet from the command line and it actually segfaulted when it couldn't find dnsmasq. It definitely needs to fail gracefully. -- [intrepid] network-manager should recommend or suggest dnsmasq https://bugs.launchpad.net/bugs/269963 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 296327] Re: smb:/// No application is registered as handling this file
*** This bug is a duplicate of bug 305030 *** https://bugs.launchpad.net/bugs/305030 Do you think your present problem is the cause of that bug in Evince? I don't expect so. The problem you mention in the report is an intended behavior and has nothing to do with bug 305030 which comes from GTK+. ** This bug has been marked a duplicate of bug 305030 Failed to print document - can't prompt for authorization -- smb:/// No application is registered as handling this file https://bugs.launchpad.net/bugs/296327 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 254840] Re: [intrepid] mouse and keyboard stop working under gdm and gnome
I have finally solved my problem I was suffering from the openchrome driver bug. So if you think you have the same bug I had try the following link https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-openchrome/+bug/274340. Thank you and Good Luck -- [intrepid] mouse and keyboard stop working under gdm and gnome https://bugs.launchpad.net/bugs/254840 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312395] [NEW] window previews compiz plugin do not show correctly previews with more desctops
Public bug reported: Binary package hint: compiz-extra Window previews plugin for compiz-fusion do not show correctly a good window on preview. In screenshot you can see a Firefox window with preview for application Pidgin. I'm using a 4 desktops in raw on Ubuntu 8.10 Release: 8.10 ** Affects: compiz-extra (Ubuntu) Importance: Undecided Status: New -- window previews compiz plugin do not show correctly previews with more desctops https://bugs.launchpad.net/bugs/312395 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312395] Re: window previews compiz plugin do not show correctly previews with more desctops
** Attachment added: Ilustration image of a bug - screenshot http://launchpadlibrarian.net/20809469/Obrazovka-1.png -- window previews compiz plugin do not show correctly previews with more desctops https://bugs.launchpad.net/bugs/312395 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312396] [NEW] Nautilus opens files over SSH as read-only when not owner.
Public bug reported: Intrepid 8.10 / Nautilus / gedit Problem: Nautilus opens files over SSH mount (with gedit) as read-only when not owner, *even when you have permissions to write through group*. In Hardy (8.04) files open just fine as writable. Expected: Files should open as writable if you have permissions to write to file through group. Result: Files open as read-only. ** Affects: ubuntu Importance: Undecided Status: New -- Nautilus opens files over SSH as read-only when not owner. https://bugs.launchpad.net/bugs/312396 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305030] Re: Failed to print document - can't prompt for authorization
Please try printing with other GTK+ apps like GEdit or Firefox - this shouldn't work if this is a GTK+ bug, like it was reported on the blog post above. There's a kind of workaround on that page. ** Also affects: gtk+2.0 (Ubuntu) Importance: Undecided Status: New ** Changed in: gtk+2.0 (Ubuntu) Status: New = Confirmed ** Changed in: evince (Ubuntu) Status: Triaged = Invalid ** Also affects: evince (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=499759 Importance: Unknown Status: Unknown ** Changed in: evince Bugwatch: Debian Bug tracker #499759 = GNOME Bug Tracker #553196 -- Failed to print document - can't prompt for authorization https://bugs.launchpad.net/bugs/305030 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 290541] Re: Xorg lockup (100% CPU spin) after several hours, several paths
Hey guys, maybe I've got the same problem: sometimes my xserver shuts down, Ubuntu has to run in a low-graphics mode (VGA or something like this) and i have to restart my computer. I had this problem with several versions of Ubuntu. ** Attachment added: X11-log http://launchpadlibrarian.net/20809491/failsafeX-backup-081230092304.tar -- Xorg lockup (100% CPU spin) after several hours, several paths https://bugs.launchpad.net/bugs/290541 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 274734] Re: [2.6.27] zd1211rw prevent the computer to suspend
hello, i can confirm this bug on my laptop running xubuntu 8.10 64bit. and i also can confirm that the attached script in the prevoius comment solves the problem so thanks for the solution :D have a nice day -- [2.6.27] zd1211rw prevent the computer to suspend https://bugs.launchpad.net/bugs/274734 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 306310] Re: Resume (from memory) goes back to sleep automatically
Have a look at bug 149665, which is a long story and may have reappeared recently. -- Resume (from memory) goes back to sleep automatically https://bugs.launchpad.net/bugs/306310 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 149665] Re: when returning from suspend my laptop tries to hibernate
ethanay: maybe the fix came from a newer kernel than the one you're using. You should report a bug for your suspend/hibernate problems, it is specific to your hardware. Could you also check with an older kernel, since you say it has reappeared? Finding the version/patch that brought it back would be really useful. ** Changed in: linux Importance: Unknown = Undecided Bugwatch: GNOME Bug Tracker #486138 = None ** Also affects: gnome-power via http://bugzilla.gnome.org/show_bug.cgi?id=486138 Importance: Unknown Status: Unknown -- when returning from suspend my laptop tries to hibernate https://bugs.launchpad.net/bugs/149665 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312397] [NEW] gnumeric loses graphs when saving as xls
Public bug reported: Binary package hint: gnumeric I'm using Ubuntu 8.10 with gnumeric 1.8.3-3ubuntu2. Attachment includes a .gnumeric file. Save this file to MS Excel 97/2000/XP format. Read the xls file back and the graph is gone. ** Affects: gnumeric (Ubuntu) Importance: Undecided Status: New -- gnumeric loses graphs when saving as xls https://bugs.launchpad.net/bugs/312397 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312397] Re: gnumeric loses graphs when saving as xls
** Attachment added: bug.gnumeric http://launchpadlibrarian.net/20809623/bug.gnumeric -- gnumeric loses graphs when saving as xls https://bugs.launchpad.net/bugs/312397 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 297169] Re: mozvoikko depends on iceweasel, should depend on firefox
Thanks for your comments. Mozvoikko works with both firefox-3.0 and firefox-3.1, so I added both of these packages to dependencies. However there is no abrowser-3.0 package in the repo (only abrowser-3.1) but the version of abrowser package is 3.0.x so I added conflict to abrowser (= 3.2). Also there is no package like iceweasel-3.1 in Debian so I added conflict to iceweasel (= 3.2). Do you accept this? I'm attaching a new debdiff. I also updated my branch. ** Attachment added: mozvoikko_0.9.5-1ubuntu1.debdiff.5 http://launchpadlibrarian.net/20809622/mozvoikko_0.9.5-1ubuntu1.debdiff.5 -- mozvoikko depends on iceweasel, should depend on firefox https://bugs.launchpad.net/bugs/297169 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 209109] Re: bemused plugin in totem-plugins not working
Hi. It is still a problem. Long time I looked at it, but as I remember I got it working. I think it is a missing file which is not copied when the debian/rules file is run. All the other plugins have plugin-name.totem-plugin file which I believe describes the plugin to totem, and that is why it doesn't turn op in the plugin list -- bemused plugin in totem-plugins not working https://bugs.launchpad.net/bugs/209109 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 145456] Re: gnome-power-manager hibernates computer instead of suspend
*** This bug is a duplicate of bug 149665 *** https://bugs.launchpad.net/bugs/149665 ** This bug is no longer a duplicate of bug 136871 Idle/inactive action/autosuspend results in a suspend AND a hibernate ** This bug has been marked a duplicate of bug 149665 when returning from suspend my laptop tries to hibernate -- gnome-power-manager hibernates computer instead of suspend https://bugs.launchpad.net/bugs/145456 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 136871] Re: Idle/inactive action/autosuspend results in a suspend AND a hibernate
*** This bug is a duplicate of bug 149665 *** https://bugs.launchpad.net/bugs/149665 ** This bug has been marked a duplicate of bug 149665 when returning from suspend my laptop tries to hibernate -- Idle/inactive action/autosuspend results in a suspend AND a hibernate https://bugs.launchpad.net/bugs/136871 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312398] [NEW] Cannot print Tif from Gimp (through CUPS)
Public bug reported: Printing tif (2904x2123 pixels) fails. I opened the same tif in document viewer, and it printed a small image in the lower left corner of the page (about 1/6th of full page size). Attached is error_log from cups, with debug enabled. Ghostscript dies with the following message (from error_log). The attached log shows two print attempts, one successfull (from document viewer) one unsuccessfull (from gimp). D [30/Dec/2008:10:45:38 +0100] [Job 44] Error: /limitcheck in --array-- D [30/Dec/2008:10:45:38 +0100] [Job 44] Operand stack: D [30/Dec/2008:10:45:38 +0100] [Job 44] 76805 D [30/Dec/2008:10:45:38 +0100] [Job 44] Execution stack: D [30/Dec/2008:10:45:38 +0100] [Job 44] %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1905 1 3 %oparray_pop 1904 1 3 %oparray_pop 1888 1 3 %oparray_pop 1771 1 3 %oparray_pop --nostringval-- %errorexec_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- D [30/Dec/2008:10:45:38 +0100] [Job 44] Dictionary stack: D [30/Dec/2008:10:45:38 +0100] [Job 44] --dict:1162/1684(ro)(G)-- --dict:0/20(G)-- --dict:99/200(L)-- --dict:66/75(L)-- I am running 9.04 Ubuntu fresh from repository. (AMD64) ** Affects: gimp (Ubuntu) Importance: Undecided Status: New -- Cannot print Tif from Gimp (through CUPS) https://bugs.launchpad.net/bugs/312398 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312398] Re: Cannot print Tif from Gimp (through CUPS)
** Attachment added: error_log http://launchpadlibrarian.net/20809697/error_log -- Cannot print Tif from Gimp (through CUPS) https://bugs.launchpad.net/bugs/312398 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 284994] Re: bluetooth-wizard unable to pair to fixed pin devices
** Also affects: bluez-gnome (Fedora) Importance: Undecided Status: New -- bluetooth-wizard unable to pair to fixed pin devices https://bugs.launchpad.net/bugs/284994 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 284994] Re: bluetooth-wizard unable to pair to fixed pin devices
Roberto. The same solution works in fedora distribution. -- bluetooth-wizard unable to pair to fixed pin devices https://bugs.launchpad.net/bugs/284994 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312399] [NEW] dns packets malformed
Public bug reported: I have seen this problem repeatedly. It seems to be a problem with Ubuntu 8.10, particularly the X64 version. Most commonly seems to affect wireless connections using a local server for DHCP and DNS lookup. Symptom: Although NetworkManager has properly configured the wireless interface, and correctly set up /etc/resolv.conf with the address of the router, DNS lookup just fails. ping etc works, but only if you use the IP address (ie, google.com=72.14.205.100) Manually adding your ISPs nameserver to /etc/resolv.conf seems to fix the problem (as far as getting you onto the internet) but it would appear that this is in fact masking the underlying problem. Using 'host google.com' as an example, this is the result of the dns lookup request: sudo tcpdump -i wlan0 -X -vvv -n -l -s 256 port 53 tcpdump: listening on wlan0, link-type EN10MB (Ethernet), capture size 256 bytes 12:04:33.836997 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 56) 192.168.0.3.43626 192.168.0.1.53: [udp sum ok] 40938+ A? google.com. (28) 0x: 4500 0038 4000 4011 b960 c0a8 0003 e.@.@..` 0x0010: c0a8 0001 aa6a 0035 0024 200e 9fea 0100 .j.5.$.. 0x0020: 0001 0667 6f6f 676c 6503 .google. 0x0030: 636f 6d00 0001 0001 com. 12:04:33.839626 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 72) 192.168.0.255.53 192.168.0.3.43626: [udp sum ok] 40938- q: A? google.com. 1/0/0 google.com. A 209.85.171.100 (44) 0x: 4500 0048 4000 4011 b852 c0a8 00ff e.@.@..R 0x0010: c0a8 0003 0035 aa6a 0034 3b11 9fea 8100 .5.j.4;. 0x0020: 0001 0001 0667 6f6f 676c 6503 .google. 0x0030: 636f 6d00 0001 0001 c00c 0001 0001 com. 0x0040: 2710 0004 d155 ab64 As can been seen, the return packet has a source address of 192.168.0.255 ... which is wrong, and the address resolution ignores it. Doing the same query and trace on a different computer on the same network gives this result: tcpdump: listening on ath0, link-type EN10MB (Ethernet), capture size 256 bytes 20:34:09.348011 IP (tos 0x0, ttl 64, id 16610, offset 0, flags [DF], proto: UDP (17), length: 56) 192.168.0.3.32774 192.168.0.1.53: [udp sum ok] 5070+ A? google.com. (28) 0x: 4500 0038 40e2 4000 4011 787e c0a8 0003 e...@.@@.x~ 0x0010: c0a8 0001 8006 0035 0024 d68e 13ce 0100 ...5.$.. 0x0020: 0001 0667 6f6f 676c 6503 .google. 0x0030: 636f 6d00 0001 0001 com. 20:34:09.349927 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 72) 192.168.0.1.53 192.168.0.3.32774: [udp sum ok] 5070- q: A? google.com. 1/0/0 google.com. A 74.125.45.100 (44) 0x: 4500 0048 4000 4011 b950 c0a8 0001 e.@.@..P 0x0010: c0a8 0003 0035 8006 0034 f768 13ce 8100 .5...4.h 0x0020: 0001 0001 0667 6f6f 676c 6503 .google. 0x0030: 636f 6d00 0001 0001 c00c 0001 0001 com. 0x0040: 2710 0004 4a7d 2d64 '...J}-d This works just fine, the return package is properly formed. It only appears to be a problem using the local router as a nameserver. Using the ISPs nameservers, you can see the packets being properly formed. Just to add complexity to the problem, if you take the interface up and down a few times, the symptoms change. It starts working after a fashion: host returns a malformed message packet ... as can be seen from the tcpdump trace below, the response packet is short: host -v google.com 192.168.0.1 Received 44 bytes from 192.168.0.1#53 in 10 ms Trying google.com ;; Warning: Message parser reports malformed message packet. ;; -HEADER- opcode: QUERY, status: NOERROR, id: 34713 ;; flags: qr rd; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;google.com.IN 21:12:43.075041 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 56) 192.168.0.8.34063 192.168.0.1.53: [udp sum ok] 34713+ ? google.com. (28) 0x: 4500 0038 4000 4011 b95b c0a8 0008 e.@.@..[ 0x0010: c0a8 0001 850f 0035 0024 5d9a 8799 0100 ...5.$]. 0x0020: 0001 0667 6f6f 676c 6503 .google. 0x0030: 636f 6d00 001c 0001 com. 21:12:43.080714 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 56) 192.168.0.1.53 192.168.0.8.34063: [udp sum ok] 34713- q: ? google.com. 1/0/0 [|domain] 0x: 4500 0038 4000 4011 b95b c0a8 0001 e.@.@..[ 0x0010: c0a8 0008 0035 850f 0024 dd98 8799 8100 .5...$.. 0x0020: 0001 0001 0667 6f6f 676c 6503 .google. 0x0030: 636f 6d00 001c 0001 com. This appears to be a
[Bug 279004] Re: Black screen booting on Kubuntu 8.10 Beta Live CD
i have the same problem too.. i cant start live cd hardy, and intrepid.. with my ati 3850. so i write this just to confirm that everyone with those cards wont be able to start...Its a bit annoying now.. Im not sure,should i boot in safe mode..install kubuntu 8.10 or 8.04 and work with vesa drivers.. Because i really want my gpu to work normally, with nice effects, and to use normal resolution(monitor is also not recognised). -- Black screen booting on Kubuntu 8.10 Beta Live CD https://bugs.launchpad.net/bugs/279004 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312401] [NEW] Sound Juicer have no MP3 selection, but can be edit under profile ?
Public bug reported: Binary package hint: sound-juicer 1) Sound Juicer have no MP3 selection, but can be edit under profile and LAME support is installed. 2) User interface isn't realy to understand for normal users. Media programmers may understand like this: 'audio/x-raw-int,rate=44100,channels=2 ! lame name=enc mode=0 vbr-quality=6 ! id3v2mux' but i not. 3) Missing real user friendly UI to setup high quality MP3 output in profile editor ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 8.10 ExecutablePath: /usr/bin/sound-juicer Package: sound-juicer 2.24.0-0ubuntu1 ProcEnviron: PATH=/home/username/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: sound-juicer Uname: Linux 2.6.27-9-generic i686 ** Affects: sound-juicer (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- Sound Juicer have no MP3 selection, but can be edit under profile ? https://bugs.launchpad.net/bugs/312401 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312401] Re: Sound Juicer have no MP3 selection, but can be edit under profile ?
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/20810094/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/20810095/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/20810096/ProcStatus.txt -- Sound Juicer have no MP3 selection, but can be edit under profile ? https://bugs.launchpad.net/bugs/312401 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 275423] Re: intrepid madwifi ath5k with AR242x not detecting all wireless networks and link speed is very poor
http://bugzilla.kernel.org/show_bug.cgi?id=12080 Bob Copeland has written a patch to prevent hardware reset failure. I've tested it with compat-wireless-2008-12-24 and it works pretty fine. More information on kernel bug tracker is available. Is it possible to have this patch applied in Ubuntu? ** Attachment added: Use a spinlock around ath5k_hw_reset http://launchpadlibrarian.net/20810107/ath5K_cant_reset_hardware_bobcopeland -- intrepid madwifi ath5k with AR242x not detecting all wireless networks and link speed is very poor https://bugs.launchpad.net/bugs/275423 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 260918] Re: needed: libv4l and associated application patches (or gspca stopped working in 2.6.27)
I've tested the SVN revision 10792 for amsn and I've got these errors in the terminal : libv4l2: error attempting to open more then 16 video devices open(/dev/video0): Device or resource busy i saw a black image without control preferences. my webcam is 046d:08ce - logitech quickcam pro 5000 and work fine with xawtv and this errors : /dev/video0 [v4l2]: no overlay support v4l-conf had some trouble, trying to continue anyway Warning: Cannot convert string -*-ledfixed-medium-r-*--39-*-*-*-c-*-*-* to type FontStruct ioctl: VIDIOC_G_STD(std=0xb792ddb0b7ef29a8 [PAL_H,PAL_D,PAL_K,PAL_M,PAL_60,NTSC_M_JP,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K1,SECAM_L,?ATSC_8_VSB,ATSC_16_VSB,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)]): Argument invalide ioctl: VIDIOC_S_STD(std=0x0 []): Argument invalide -- needed: libv4l and associated application patches (or gspca stopped working in 2.6.27) https://bugs.launchpad.net/bugs/260918 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 303679] Re: Sound - Master channel missing on sound blaster live 24bit
Liam: What does lspci -nn | grep audio say your card is? ** Changed in: linux-meta (Ubuntu) Sourcepackagename: None = linux-meta -- Sound - Master channel missing on sound blaster live 24bit https://bugs.launchpad.net/bugs/303679 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 295135] Re: libpam-runtime fails to upgrade from feisty to intrepid
@Steve Well, I have the same bug and : LANG=C apt-cache policy debconf 1.5.23ubuntu2 0 500 http://fr.archive.ubuntu.com intrepid/main Packages 1.5.20 0 500 http://fr.archive.ubuntu.com hardy/main Packages *** 1.5.14ubuntu1 0 You're assuming that everyeone should have installed from scratch since hardy ? intrepid ? (like windows ;) but what about smooth upgrade since gutsy !? Anyway, a package do not have to rely on history. It should work on its own. By the way, it is not always possible to upgrade debconf (easily) LANG=C apt-get install debconf ... E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). And LANG=C apt-get -f install leads to : Undefined subroutine main::x_loadtemplatefile called at /usr/sbin/pam-auth-update line 99. dpkg: error processing libpam-runtime (--configure): subprocess post-installation script returned error exit status 9 Errors were encountered while processing: libpam-runtime E: Sub-process /usr/bin/dpkg returned an error code (1) -- libpam-runtime fails to upgrade from feisty to intrepid https://bugs.launchpad.net/bugs/295135 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 290753] Re: Multiple applications have stopped the suspend from taking place. vlc : Playing some media
I can confirm this bug twice, Firstily, I use Intrepid on HP 6510b with vlc and mozilla-plugin-vlc installed. If I do grep of vlc in ps, I don't get any result. I'm sure firefox is not running. Secondly, the same issue with eeebuntu based on intrepid (Asus EEE 901). Does anybody want me to give him/her some logs? Tell me :) -- Multiple applications have stopped the suspend from taking place. vlc : Playing some media https://bugs.launchpad.net/bugs/290753 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 253303] Re: fstab UUID of swap doesn't update after resizing partitions
This is still an issue with 8.10 release. I increased by swap partition; as before, the UUID of swap is not reflecting the correct one -- fstab UUID of swap doesn't update after resizing partitions https://bugs.launchpad.net/bugs/253303 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234407] Re: Session is not initialised properly when selecting non-default window manager
this was already fixed. ** Changed in: ldm (Ubuntu) Status: New = Fix Released -- Session is not initialised properly when selecting non-default window manager https://bugs.launchpad.net/bugs/234407 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 303679] Re: Sound - Master channel missing on sound blaster live 24bit
** Changed in: linux (Ubuntu) Sourcepackagename: linux-meta = linux -- Sound - Master channel missing on sound blaster live 24bit https://bugs.launchpad.net/bugs/303679 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 292990] Re: PowerDVD Linux does not read correctly a dvd under ubuntu 8.10
We will be refunded? Will there be a new version of powerdvd? -- PowerDVD Linux does not read correctly a dvd under ubuntu 8.10 https://bugs.launchpad.net/bugs/292990 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312402] [NEW] File browser display 'cannot mount volume xxx'
Public bug reported: File browser display 'cannot mount volume xxx'. Volume is a ntfs partition and was not closed by windows. User can not mount volume anyway. Real user friendly UI implementation is in this situation: 1) Display an error message that the user can understand in a dialog box with selectable error text 2) Ask the user to mount anyway the the volume and inform the user about the risk. (Yes|No) 3) Yes: mount the volume 4) No: do nothing. ** Affects: meta-gnome2 (Ubuntu) Importance: Undecided Status: New -- File browser display 'cannot mount volume xxx' https://bugs.launchpad.net/bugs/312402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 272826] Re: Ubuntero inappropriate for female contributors
Juste a side note, although the issue has been fixed... It has been considered that Ubuntero sounded Spanish. That's fine, but to me it also sounds like Esperanto, which is more of a neutral language and pretty wide-spread in open-source communities (you just have to see the translations made in this language... it's hard to get Windows or MacOS in Esperanto imo). In Esperanto (and Ido by the way), Ubuntero would be a _neutral_ name, as all names, while Ubunterulo would be the specific word for males and Ubunterino the term for women. My 2 cents ;) -- Ubuntero inappropriate for female contributors https://bugs.launchpad.net/bugs/272826 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 216990] Re: error in auth.log when switch user -- pam_smbpass.so
I need to note that if your /etc/pam.d/common-* config files were modified locally, you will have to fix them manually and wont be prompted to merge your changes with the new version as these files aren't conffiles and the only logic in libpam-runtime.postinst is to upgrade conffiles if their md5sum didn't change. -- error in auth.log when switch user -- pam_smbpass.so https://bugs.launchpad.net/bugs/216990 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312403] [NEW] Lenovo ideapad S10 internal microphone doesn't work
Public bug reported: Binary package hint: alsa-base In Intrepid and Jaunty Alpha 2, the internal microphone on the Lenovo ideapad S10 doesn't work. After quite a bit of searching, I suspect this machine has a different pin-out from other machines with the Realtek ALC269 codec. Under Jaunty Alpha 2, I tried all of the options for model that I could find in the alsa-base file. Using options snd-hda-intel model=eeepc-p703 seemed to make the mic work using sound recorder but caused other problems (such as no Master channel to control speaker volume). In the default setup, everything seems to work except the internal mic. The internal speakers work but attempting to use the internal mic causes feedback through the speakers Under Intrepid, even the keyboard hotkeys worked to control the volume. This is broken under Jaunty alpha 2. Expected behavior - internal speakers work and volume can be controlled with keyboard hotkeys. internal speakers disconnected when headphone plugged in and headphones work. Internal and external microphones work. Please let me know if I can provide more info. ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Description changed: Binary package hint: alsa-base In Intrepid and Jaunty Alpha 2, the internal microphone on the Lenovo ideapad S10 doesn't work. After quite a bit of searching, I suspect this machine has a different pin-out from other machines with the Realtek ALC269 codec. Under Jaunty Alpha 2, I tried all of the options for model that I could find in the alsa-base file. Using options snd-hda-intel model=eeepc-p703 seemed to make the mic work using sound recorder but caused other problems (such as no Master channel to control speaker volume). In the default setup, everything seems to work except the internal mic. The internal speakers work but attempting to use the internal mic causes feedback through the speakers Under Intrepid, even the keyboard hotkeys worked to control the volume. This is broken under Jaunty alpha 2. Expected behavior - internal speakers work and volume can be controlled with keyboard hotkeys. internal speakers disconnected when headphone - plugged in and headphones work. External mic works. + plugged in and headphones work. Internal and external microphones work. Please let me know if I can provide more info. -- Lenovo ideapad S10 internal microphone doesn't work https://bugs.launchpad.net/bugs/312403 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312406] [NEW] sks cron.daily uses incorrect db4.x_archive
Public bug reported: Binary package hint: sks 1. Ubuntu release : Description:Ubuntu 8.10 Release:8.10 2. Package version : sks: Installed: 1.1.0-3 Candidate: 1.1.0-3 Version table: *** 1.1.0-3 0 500 http://no.archive.ubuntu.com intrepid/universe Packages 100 /var/lib/dpkg/status 3. Fault description : Installed sks on Ubuntu server. The file /etc/cron.daily/sks has the command db4.1_archive | xargs --no-run-if-empty rm -f, however libdb4.6 was installed by default and the command should thus be db4.6_archive | xargs --no-run-if-empty rm -f. ** Affects: sks (Ubuntu) Importance: Undecided Status: New -- sks cron.daily uses incorrect db4.x_archive https://bugs.launchpad.net/bugs/312406 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238259] Re: Building amd64 module for virtualbox-ose fails.
SHORT ANSWER: apt-get install virtualbox-ose-source linux-headers-$(uname -r) BUILD_TARGET_ARCH=amd64 m-a -k /usr/src/linux-headers-$(uname -r) build virtualbox-ose dpkg -i /usr/src/virtualbox-ose-modules-$(uname -r)_*_amd64.deb LONG ANSWER: the problem, at least for virtualbox-ose-source 1.5.6-dfsg-6ubuntu1 in hardy, is that debian/rules (lines 38-48) does not set ARCH correctly (ie ARCH set to i386 instead of x86_64). see attached patch for possible fix. on all my amd64 machines (two running debian etch and one running ubuntu hardy; linux 2.6.22, 2.6.26, and 2.6.24 respectively) uname -m returns x86_64. so line 40 (grep 86) evaluates to true and ARCH is set to i386. neither of the two remaining tests (lines 43 46) are true because module-assistant sets KVERS to 2.6.24-22-generic which doesn't contain the architecture as a substring (ie 86 or amd64). so the binary-modules rule calls the module's Makefile with ARCH=i386. in the module's Makefile, on lines 18-40, if BUILD_TARGET_ARCH is not already set, then ARCH (and uname -m if ARCH is not set, but not applicable in our case) is used to set BUILD_TARGET_ARCH. since ARCH=i386 is passed to the Makefile by debian/rules, the Makefile sets the BUILD_TARGET_ARCH to x86. this eventually defines RT_ARCH_X86 in the Makefile which causes 32-bit i386 assembly to be compiled with SUPDRVShared.c (unsuccessfully with 64-bit amd64 assembler) which causes the error and halts the build. because in the Makefile BUILD_TARGET_ARCH is tested before ARCH and debian/rules does not set BUILD_TARGET_ARCH, but ARCH, my hack is to define BUILD_TARGET_ARCH (as amd64) when calling module-assistant. but the more proper solution is to have debian/rules properly recognize the arch from uname -m. ** Attachment added: patch for debian/rules to set ARCH=x86_64 based on uname -m returning x86_64 http://launchpadlibrarian.net/20810484/debian-rules.patch -- Building amd64 module for virtualbox-ose fails. https://bugs.launchpad.net/bugs/238259 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 269447] Re: gedit crashed with SIGSEGV in PyObject_GetAttrString()
Felipe: do you have any Gedit plugins activated? The crash could be caused by a bad plugin. -- gedit crashed with SIGSEGV in PyObject_GetAttrString() https://bugs.launchpad.net/bugs/269447 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312407] [NEW] Report failure to connect rather than no matching data found from musicbrainz
Public bug reported: Binary package hint: sound-juicer Ubuntu 8.10 apt-cache policy sound-juicer sound-juicer: Installed: 2.24.0-0ubuntu1 Candidate: 2.24.0-0ubuntu Version table: *** 2.24.0-0ubuntu1 0 500 http://au.archive.ubuntu.com intrepid/universe Packages 100 /var/lib/dpkg/status If Internet access is down sound juicer will indicate that it cannot find a matching album title from musicbrainz. The user is also prompted if they would like to submit the album titles. The error should indicate that sound juicer could not connect to musicbrainz rather than not find matching data. ** Affects: sound-juicer (Ubuntu) Importance: Undecided Status: New -- Report failure to connect rather than no matching data found from musicbrainz https://bugs.launchpad.net/bugs/312407 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 259724] Re: window decoration with the title npviewer.bin appears temporarily
I am not able to reproduce this anymore. Might be because of changed settings or because of updates. -- window decoration with the title npviewer.bin appears temporarily https://bugs.launchpad.net/bugs/259724 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 259724] Re: window decoration with the title npviewer.bin appears temporarily
Exactly one person reported the problem and one person doesn't have the problem anymore. 1-1=0. The bug might not exist anymore. ** Changed in: nspluginwrapper (Ubuntu) Status: New = Invalid -- window decoration with the title npviewer.bin appears temporarily https://bugs.launchpad.net/bugs/259724 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 257827] Re: brightness changes twice when using hotkeys
Since the update I have another problem, see: bug 311716 -- brightness changes twice when using hotkeys https://bugs.launchpad.net/bugs/257827 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 311716] Re: The slider brightness Applet has value inverted after the last update (version 2.24.0)
I have the same problem after the update of the kernel from (2.6.27-10-generic to 2.6.27-11-generic). I think it is a kernel problem since the is a lot of change is th release note concerning the brightness. Which laptop do you have? I have an asus laptop (may come from asus-acpi). -- The slider brightness Applet has value inverted after the last update (version 2.24.0) https://bugs.launchpad.net/bugs/311716 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312391] Re: Evolution crashed on cahnge mail account settings
Thank you for taking the time to report this bug and helping to make Ubuntu better. However, your crash report is either missing or challenging to deal with as a .crash file. Please follow these instructions to have apport report a new bug about your crash that can be dealt with by the automatic retracer. If you are running the Ubuntu Stable Release you might need to enable apport in /etc/default/apport and restart. If you are using Ubuntu with the Gnome desktop environment - launch nautilus and navigate to your /var/crash directory and double click on the crash report you wish to submit. If you are using Kubuntu or Xubuntu you can file the crash using /usr/share/apport/apport-qt --crash-file=/var/crash/_my_crash_report.crash in a terminal - where _my_crash_report.crash is the crash you would like to report. I'm closing this bug report since the process outlined above will automatically open a new bug report which can then dealt with more efficiently. Thanks in advance for your cooperation and understanding. ** Changed in: evolution (Ubuntu) Status: New = Invalid -- Evolution crashed on cahnge mail account settings https://bugs.launchpad.net/bugs/312391 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312347] Re: I just got a Dell mini 9 and installed Amarok like an idiot and i think it crashed my system. Un-installed it but wanna make sure it
You didn't. Anyway. When exactly did everything froze? (before downloading, while downloading, after downloading, while installing, after installing, when quitting package manager, when starting amarok, when quitting amarok) Also your precise definition of froze would be very intersting. (did the mouse move? did anything move at all? did your screen go black?). P.S. writing a forum-like post doesn't get you any bonus points, in fact it makes the work of the fellows who have to triage your report a lot more difficult. ** Changed in: amarok (Ubuntu) Status: New = Incomplete ** Summary changed: - I just got a Dell mini 9 and installed Amarok like an idiot and i think it crashed my system. Un-installed it but wanna make sure it + Dell mini froze when installing Amarok ** Description changed: + Shortened report: + Installed Amarok = Everything froze = uninstalled Amarok + + Original report: Binary package hint: amarok I am really scared. I just got a mini 9 from Xmas and everything was working fine. I am trying to d/l music on my laptop (which I will NEVER DO AGAIN) and looked in my 'supported' additional software to download. Saw Amarok, and downloaded it. Everything froze. I then tried to un- install, and had to use package manager, which removed program. I honestly will never do anything to this system again, but I really need to make sure that I didn't totally eff up my brand-new laptop Please help me I am freaking out. Thanks so much in advance. Lauren ProblemType: Bug Architecture: lpia Date: Mon Dec 29 21:26:15 2008 DistroRelease: Ubuntu 8.04 ExecutablePath: /usr/sbin/synaptic Package: synaptic 0.61ubuntu9 PackageArchitecture: lpia ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: synaptic Uname: Linux 2.6.24-19-lpia i686 -- Dell mini froze when installing Amarok https://bugs.launchpad.net/bugs/312347 You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to amarok in ubuntu. -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 312409] [NEW] Intel Corporation PRO/Wireless 2200BG doesn't work after suspend to ram
Public bug reported: The wifi works correctly with : 02:06.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) But it doesn't work after a suspend to ram (I have to reboot). I attach the result of 'lspci' and the last lines of /var/log/syslog. ** Affects: ubuntu Importance: Undecided Status: New -- Intel Corporation PRO/Wireless 2200BG doesn't work after suspend to ram https://bugs.launchpad.net/bugs/312409 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312409] Re: Intel Corporation PRO/Wireless 2200BG doesn't work after suspend to ram
** Attachment added: result of lspci http://launchpadlibrarian.net/20810706/lspci -- Intel Corporation PRO/Wireless 2200BG doesn't work after suspend to ram https://bugs.launchpad.net/bugs/312409 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312409] Re: Intel Corporation PRO/Wireless 2200BG doesn't work after suspend to ram
** Attachment added: last lines of syslog (during suspend to ram / wake up) http://launchpadlibrarian.net/20810715/syslog_trace -- Intel Corporation PRO/Wireless 2200BG doesn't work after suspend to ram https://bugs.launchpad.net/bugs/312409 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 311716] Re: The slider brightness Applet has value inverted after the last update (version 2.24.0)
** Changed in: linux (Ubuntu) Sourcepackagename: gnome-power-manager = linux ** Summary changed: - The slider brightness Applet has value inverted after the last update (version 2.24.0) + The slider brightness Applet has value inverted after the last update (2.6.27-11) -- The slider brightness Applet has value inverted after the last update (2.6.27-11) https://bugs.launchpad.net/bugs/311716 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 311544] Re: segfault during X startup with savage driver
Removed unused variable ** Attachment added: Call xf86CrtcConfigInit() from within SavagePreInit() http://launchpadlibrarian.net/20810695/04_allocate_xf86crtcconfig.diff -- segfault during X startup with savage driver https://bugs.launchpad.net/bugs/311544 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 303679] Re: Sound - Master channel missing on sound blaster live 24bit
Could you also add the output of aplay -L cat ~/.asoundrc (if it exists) -- Sound - Master channel missing on sound blaster live 24bit https://bugs.launchpad.net/bugs/303679 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 288318] Re: DPMS doesn't turn off the screen
I have found out that DPMS stuff actually works AFTER RECOVERING from a suspend to ram/disk. It does not work on a first clean boot but after a suspend action it works just fine. I'm using KDE 4.2 Beta2. -- DPMS doesn't turn off the screen https://bugs.launchpad.net/bugs/288318 You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to kdebase-workspace in ubuntu. -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 312411] [NEW] [Jaunty] Suspend/resume failure on ThinkPad T61 (pulseaudio-related?)
Public bug reported: The attached syslog shows: Dec 27 21:12:58 perseus kernel: [50210.228534] PM: Preparing system for mem sleep [...] Dec 27 21:12:58 perseus pulseaudio[28280]: alsa-util.c: Got POLLERR from ALSA Dec 27 21:12:58 perseus pulseaudio[28280]: alsa-util.c: PCM state is SUSPENDED [...these continue throughout...] Dec 27 21:13:25 perseus kernel: [50222.669240] PM: Syncing filesystems ... d956626] [8026d965] refrigerator+0xe5/0x130 [...this appears to be a dump of scheduler debug info, but the kernel's ring buffer overflowed...] Dec 27 21:13:25 perseus kernel: [50243.160297] Restarting tasks ... done. [...userspace appears to come back to life...] At this point, I was left with a corrupted usplash screen and was not able to reinitialize the display by any means I tried (including starting up the X server). I was able to blindly login and copy dmesg and syslog before I had to power cycle the system to get it back to a usable state. ProblemType: Bug Architecture: amd64 DistroRelease: Ubuntu 9.04 Package: linux-image-2.6.28-3-generic 2.6.28-3.4 ProcCmdLine: root=UUID=305dde78-d20a-4248-aaf4-09447b7c5791 ro quiet splash ProcEnviron: LC_COLLATE=C PATH: custom, user LANG=en_US.UTF-8 SHELL=/bin/zsh ProcVersionSignature: Ubuntu 2.6.28-3.4-generic SourcePackage: linux ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- [Jaunty] Suspend/resume failure on ThinkPad T61 (pulseaudio-related?) https://bugs.launchpad.net/bugs/312411 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312411] Re: [Jaunty] Suspend/resume failure on ThinkPad T61 (pulseaudio-related?)
** Attachment added: syslog excerpt showing full sequence http://launchpadlibrarian.net/20810796/syslog ** Attachment added: BootDmesg.txt http://launchpadlibrarian.net/20810797/BootDmesg.txt ** Attachment added: CurrentDmesg.txt http://launchpadlibrarian.net/20810798/CurrentDmesg.txt ** Attachment added: Dependencies.txt http://launchpadlibrarian.net/20810799/Dependencies.txt ** Attachment added: HalComputerInfo.txt http://launchpadlibrarian.net/20810800/HalComputerInfo.txt ** Attachment added: Lspci.txt http://launchpadlibrarian.net/20810801/Lspci.txt ** Attachment added: Lsusb.txt http://launchpadlibrarian.net/20810802/Lsusb.txt ** Attachment added: ProcCpuinfo.txt http://launchpadlibrarian.net/20810803/ProcCpuinfo.txt ** Attachment added: ProcInterrupts.txt http://launchpadlibrarian.net/20810804/ProcInterrupts.txt ** Attachment added: ProcModules.txt http://launchpadlibrarian.net/20810805/ProcModules.txt -- [Jaunty] Suspend/resume failure on ThinkPad T61 (pulseaudio-related?) https://bugs.launchpad.net/bugs/312411 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312411] Re: [Jaunty] Suspend/resume failure on ThinkPad T61 (pulseaudio-related?)
** Attachment added: dmesg immediately after the failure http://launchpadlibrarian.net/20810808/dmesg ** Attachment removed: BootDmesg.txt http://launchpadlibrarian.net/20810797/BootDmesg.txt -- [Jaunty] Suspend/resume failure on ThinkPad T61 (pulseaudio-related?) https://bugs.launchpad.net/bugs/312411 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312410] [NEW] Missing date/time display settings in Evolution.
Public bug reported: Binary package hint: evolution There is no display property settings to set display i.e. 12.04.2008 12:33 or 04/12/2008 12:33. Last but not least the mail main window closing after pressing the OK button in the settings dialog! ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 8.10 ExecutablePath: /usr/bin/evolution Package: evolution 2.24.2-0ubuntu1 ProcEnviron: PATH=/home/username/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: evolution Uname: Linux 2.6.27-9-generic i686 ** Affects: evolution (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- Missing date/time display settings in Evolution. https://bugs.launchpad.net/bugs/312410 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312410] Re: Missing date/time display settings in Evolution.
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/20810784/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/20810785/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/20810786/ProcStatus.txt -- Missing date/time display settings in Evolution. https://bugs.launchpad.net/bugs/312410 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 122285] Re: thin-client-manager share screen error
ha ! i knew there was a bug on this, but i couldnt find it anymore ... --- thin-client-manager (0.5.1-0ubuntu6) jaunty; urgency=low * drop VNC support, it never worked properly, people should use italc for advanced thin client management. --- i took the ten minutes to rip out the whole VNC part so it at least doesnt suggest anymore it could be used for sharing or viewing the client screens... the remaining functions should work as advertised ... -- thin-client-manager share screen error https://bugs.launchpad.net/bugs/122285 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312413] [NEW] java crash/disabled on hardy heron
Public bug reported: Terminal faliure to install java error port 8080 error on msttcorefonts + trouble deleting it i am using hardy heron 8.04 Flash player does not work ** Affects: ubuntu Importance: Undecided Status: New -- java crash/disabled on hardy heron https://bugs.launchpad.net/bugs/312413 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 311860] Re: Auto-hibernate due to inactivity results in a resumed session with hanged gnome-power-manager preventing the system from entering hibernate again
WORKAROUND: This issue doesn't arise if the system uses uswsusp rather than the kernel's method of hibernation. So, the fix is to force gnome-power- management to use s2disk rather than the kernel method. This is fairly simple to do: Download the attached script hal-system-power-hibernate-linux sudo apt-get install uswsusp sudo s2disk##Test to see if s2disk works. CAUTION: make sure data is saved for this test! sudo mv /usr/lib/hal/scripts/linux/hal-system-power-hibernate-linux /usr/lib/hal/scripts/linux/hal-system-power-hibernate-linux.backup sudo cp hal-system-* /usr/lib/hal/scripts/linux/ sudo chmod 755 /usr/lib/hal/scripts/linux/* Now, gnome-power-manager should use s2disk to hibernate fixing my reported issue. Note: I found these instructions from http://blog.paulbetts.org/index.php/2007/02/11/fixing-software-suspend- hibernate-with-uswsusp-in-ubuntu-feisty-and-edgy/#comment-17671. The only change I made was to modify the script to reflect the location of the s2disk binary in Ubuntu 8.10. ** Attachment added: hal-system-power-hibernate-linux http://launchpadlibrarian.net/20810875/hal-system-power-hibernate-linux -- Auto-hibernate due to inactivity results in a resumed session with hanged gnome-power-manager preventing the system from entering hibernate again https://bugs.launchpad.net/bugs/311860 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 299944] Re: ldm should depend on gtk2-engines instead of gtk2-engines-clearlooks
the clearlooks engine is used by the builtin default ltsp theme which is used as a fallback. it must be installed in any case to provide a safe fallback mechanism. ** Changed in: ldm (Ubuntu) Status: New = Invalid -- ldm should depend on gtk2-engines instead of gtk2-engines-clearlooks https://bugs.launchpad.net/bugs/299944 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
