Re: [vox-tech] Slackware 10 Printing
On Saturday 13 November 2004 07:31, Ken Herron wrote: The printer is plugged into the parallel port of the Slackware 10 box and is used only by the Slackware 10 box > wild bill wrote: > >After probing around, I found in /etc/cups/printers.conf > > an entry: > > > >DeviceURI x > > > >which I changed to > >DeviceURI parallel:/dev/lp0 > > Let's back up a bit. How does this computer access this > printer? Is the printer plugged directly into one of the > computer's ports? parallel or serial? Or is the printer > accessed over the network? > ___ > vox-tech mailing list > [EMAIL PROTECTED] > http://lists.lugod.org/mailman/listinfo/vox-tech ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] Printing on non-Linux-compatible printers via Windows PC (was: Printer Recommendation?
Hey Trevor. I moved the e-mail back to vox-tech so other people can benefit from our discussion. I hope that's okay. Yeah, so the URL I gave you shows you how to setup the Windows XP computer attached to the printer. After that's all done, the Linux computer can print to the Windows computer just like any UNIX computer on the network with its LPR port open. This can be done in several ways, but these days it's done most commonly with CUPS. There are several CUPS-configuration tools, but the canonical one is a web-interface one which you can access from your Linux box via this URL: http://localhost:631/ Select "Administration Tasks", enter "root" as your username and type in the root password, [Add Printer], type in a printer name then continue, select "LPD/LPR Host or Printer", type in the URL to the printer in this format: lpd://windows_box_ip/queue where "windows_box_ip" is the IP address or the name of the windows box, and "queue" is "GhostscriptLPR" (if you followed the directions on the website exactly.) You might need to change your windows box to static IP and refer to the box by its IP if you can't use the windows box's name as "windows_box_ip". Hope that helps! -Mark On Sun, 14 Nov 2004, Trevor M. Lango wrote: > On Sunday 14 November 2004 16:41, you wrote: > > On Sun, 14 Nov 2004, Trevor M. Lango wrote: > > > On Sunday 14 November 2004 16:13, Mark K. Kim wrote: > > > [snipped for clarity] > > > > > > > For my parents, I got them a Lexmark all-in-one (inkjet) printer, but > > > > it has absolutely no Linux suport. Lexmark is generally bad with Linux > > > > support, apparently. But I could still print to that printer from my > > > > Linux box via the LAN using some postscript wrapper driver. That still > > > > needs the printer to be hooked up to a Windows box, though. > > > > > > Can you please explain how you did this? I would like to print to a > > > Canon Multipass printer attached to a windows box on my network. > > > > [snip] > > > > Sure. I had this process archived in our mailinglist archive. It's all > > here: > > > >http://lugod.org/mailinglists/archives/vox-tech/2004-03/msg00151.html > > Okay - thanks! I followed this procedure but I am uncertain as to how to > setup the printer on my linux box? Any further help much appreciated!!! > > > > -Mark =) > -- Mark K. Kim AIM: markus kimius Homepage: http://www.cbreak.org/ Xanga: http://www.xanga.com/vindaci Friendster: http://www.friendster.com/user.php?uid=13046 PGP key fingerprint: 7324 BACA 53AD E504 A76E 5167 6822 94F0 F298 5DCE PGP key available on the homepage ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] uhci memory problem
I don't know. Sorry. -_-' -Mark On Sun, 14 Nov 2004, Nick Schmalenberger wrote: > > Hmm... I donno. Can you post `lspci -vv` output and can you check your > > BIOS to see if that memory region is occupied or reserved? You might > > also > > wanna try disabling the sound card from your BIOS and see if that does > > anything. Oh, and look up your motherboard model & usb issues on > > google... Otherwise I'm out of ideas!! =( > There aren't any options in my BIOS about io ports in that range, just > for the serial and parallel ports that are much lower. I am also pretty > certain that the conflict is not with my sound card because the usb > controller is initialized well before the sound card. About searching > for my motherboard and usb on google, most of the people seem to be > having IRQ conflicts, not i/o port. I guess that is just because IRQ > conflicts are more common in general. I will append my lspci -vv output. > Maybe you or somebody on this list will see something in it I don't know > about. > Nick > :00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host > bridge (rev 03) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR-Latency: 64 > Region 0: Memory at f800 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 1.0 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- > 64bit- FW- AGP3- Rate=x1,x2 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > Rate= > > :00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP > bridge (rev 03) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR-Latency: 128 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > Memory behind bridge: fe40-febf > Prefetchable memory behind bridge: f600-f6ff > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+ > > :00:02.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR-Latency: 0 > > :00:02.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) > (prog-if 80 [Master]) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR-Latency: 64 > Region 4: I/O ports at fc90 [size=16] > > :00:02.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev > 01) (prog-if 00 [UHCI]) > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR-Interrupt: pin D routed to IRQ 11 > Region 4: I/O ports at fca0 [size=32] > > :00:02.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR-Interrupt: pin ? routed to IRQ 9 > > :00:03.0 CardBus bridge: Texas Instruments PCI1251A (rev 01) > Subsystem: IBM: Unknown device 0138 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR-Latency: 168, Cache Line Size: 0x08 (32 bytes) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at 1000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 > Memory window 0: 1040-107ff000 (prefetchable) > Memory window 1: 1080-10bff000 > I/O window 0: 4000-40ff > I/O window 1: 4400-44ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ > 16-bit legacy interface ports at 0001 > > :00:03.1 CardBus bridge: Texas Instruments PCI1251A (rev 01) > Subsystem: IBM: Unknown device 0138 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR-Latency: 168, Cache Line Size: 0x08 (32 bytes) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at 2000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 > Memory window 0: 10c0-10fff000 (prefetchable) > Memory window 1: 1100-113ff000 > I
Re: [vox-tech] uhci memory problem
> Hmm... I donno. Can you post `lspci -vv` output and can you check your > BIOS to see if that memory region is occupied or reserved? You might > also > wanna try disabling the sound card from your BIOS and see if that does > anything. Oh, and look up your motherboard model & usb issues on > google... Otherwise I'm out of ideas!! =( There aren't any options in my BIOS about io ports in that range, just for the serial and parallel ports that are much lower. I am also pretty certain that the conflict is not with my sound card because the usb controller is initialized well before the sound card. About searching for my motherboard and usb on google, most of the people seem to be having IRQ conflicts, not i/o port. I guess that is just because IRQ conflicts are more common in general. I will append my lspci -vv output. Maybe you or somebody on this list will see something in it I don't know about. Nick :00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- :00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B+ :00:02.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 :00:03.1 CardBus bridge: Texas Instruments PCI1251A (rev 01) Subsystem: IBM: Unknown device 0138 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 :00:06.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01) Subsystem: CIS Technology Inc Lucent Win Modem Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] What not to backup on RH9/apache
On Sunday 14 November 2004 04:18 pm, Jack LaPlante wrote: > Rod Roark wrote: > > > I think you want to read up on rsync. You can get it to > > copy only what's changed, so you don't have to worry so much > > about excluding things. > > > > -- Rod > rsync will not work, AFAIK, because I can _only_ ftp into the backup > server. Can't get in via rsh, ssh, telnet. I guess I could rsync > locally (on the same ded. server I'm bakcing up), then ftp to the backup > server. But does that make sense? Hmm, that's not much of a backup server. What I do is run rsyncd on my server at home that's attached to DSL, and the offsite server sends its backups to that. This works really well since I get about 5 Mbps inbound from the DSL. It's also comforting to have the two machines in different states and under different management... for example I'm not screwed if I have a billing dispute with the hosting provider. BTW I'm using Layered Technologies (layeredtech.com) for unmanaged hosting for a startup business. They have really good deals and astronomical bandwidth. -- Rod ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] Printer Recommendation?
On Sun, 14 Nov 2004, Trevor M. Lango wrote: > On Sunday 14 November 2004 16:13, Mark K. Kim wrote: > [snipped for clarity] > > > For my parents, I got them a Lexmark all-in-one (inkjet) printer, but it > > has absolutely no Linux suport. Lexmark is generally bad with Linux > > support, apparently. But I could still print to that printer from my > > Linux box via the LAN using some postscript wrapper driver. That still > > needs the printer to be hooked up to a Windows box, though. > > Can you please explain how you did this? I would like to print to a Canon > Multipass printer attached to a windows box on my network. [snip] Sure. I had this process archived in our mailinglist archive. It's all here: http://lugod.org/mailinglists/archives/vox-tech/2004-03/msg00151.html -Mark =) -- Mark K. Kim AIM: markus kimius Homepage: http://www.cbreak.org/ Xanga: http://www.xanga.com/vindaci Friendster: http://www.friendster.com/user.php?uid=13046 PGP key fingerprint: 7324 BACA 53AD E504 A76E 5167 6822 94F0 F298 5DCE PGP key available on the homepage ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] What not to backup on RH9/apache
Stuff you really should back up: /etc /home /var (don't need everything here but back up everything just in case) Stuff you don't really need to back up 'cuz they should be empty, but you should if they aren't: /usr/etc /usr/local/etc Everything else you should be able to recover from the original Linux CD by reinstalling or whatever. If you don't want to go through the reinstallation process if your system gets ever trashed, you should back up everything except /tmp. But don't quote me on that -- double and triple check just in case. If you don't back up everything but just the directories I list above, be careful when you restore your system because you have to make sure you've installed the exact same packages and restore just the stuff you need and don't create conflicting settings. I *highly* recommend you back up everything unless you know exactly what's going on with each directory 'cuz it'll give you problems later when you have to recover stuff. -Mark On Sun, 14 Nov 2004, Jack LaPlante wrote: > I've done some preliminary reading on rsync, it seems like what I want. > I'm still curious about which are the obvious RH9 directories that > change too often or are devices etc. and should not be backed up. > > Rod Roark wrote: > > > I think you want to read up on rsync. You can get it to > > copy only what's changed, so you don't have to worry so much > > about excluding things. > > > > -- Rod > > > > On Sunday 14 November 2004 12:23 pm, Jack LaPlante wrote: > > > >>I used to host about 12 clients by reselling CIHost shared accts, now I > >>have my own dedicated server (at 1and1.com) and have been moving clients > >>to it over the past few months. CIHost claims nightly backups, but when > >>a drive failed there a couple of weeks ago, the most recent backup they > >>had was 9 months old. My best customers were still on that drive and > >>were quite pissed off! So now I am > >>setting up a backup regime on my dedicated server. > >> > >>I'm buying the backup server from 1and1, and it is accessible only by > >>logging in from my root server. There's no bandwidth charge for ftping > >>on their internal network. I guess I will use tar to create a local > >>archive on the root server, then ftp the compressed archive to the > >>backup server. I'm assuming I can automate this with bash scripts and cron. > >> > >>Basically, I want to be as all-inclusive as I can, so if my HD fails > >>there will be as little interuption as possible. So I thought I would > >>include everything *except* certain directories. The root server is > >>RH9/apache. What are the obvious directories to exclude from backing > >>up? And is this basically a sound backup plan? > > > > ___ > > vox-tech mailing list > > [EMAIL PROTECTED] > > http://lists.lugod.org/mailman/listinfo/vox-tech > > > > -- > > > > > > -- > Jack LaPlante > [EMAIL PROTECTED] > > > Pyroglyph Inc. > > > Clarity and Style > For the Digital Age > >pyroglyph.com pwx.com uneasychair.com > ___ > vox-tech mailing list > [EMAIL PROTECTED] > http://lists.lugod.org/mailman/listinfo/vox-tech > -- Mark K. Kim AIM: markus kimius Homepage: http://www.cbreak.org/ Xanga: http://www.xanga.com/vindaci Friendster: http://www.friendster.com/user.php?uid=13046 PGP key fingerprint: 7324 BACA 53AD E504 A76E 5167 6822 94F0 F298 5DCE PGP key available on the homepage ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] What not to backup on RH9/apache
Rod Roark wrote: I think you want to read up on rsync. You can get it to copy only what's changed, so you don't have to worry so much about excluding things. -- Rod rsync will not work, AFAIK, because I can _only_ ftp into the backup server. Can't get in via rsh, ssh, telnet. I guess I could rsync locally (on the same ded. server I'm bakcing up), then ftp to the backup server. But does that make sense? On Sunday 14 November 2004 12:23 pm, Jack LaPlante wrote: I used to host about 12 clients by reselling CIHost shared accts, now I have my own dedicated server (at 1and1.com) and have been moving clients to it over the past few months. CIHost claims nightly backups, but when a drive failed there a couple of weeks ago, the most recent backup they had was 9 months old. My best customers were still on that drive and were quite pissed off! So now I am setting up a backup regime on my dedicated server. I'm buying the backup server from 1and1, and it is accessible only by logging in from my root server. There's no bandwidth charge for ftping on their internal network. I guess I will use tar to create a local archive on the root server, then ftp the compressed archive to the backup server. I'm assuming I can automate this with bash scripts and cron. Basically, I want to be as all-inclusive as I can, so if my HD fails there will be as little interuption as possible. So I thought I would include everything *except* certain directories. The root server is RH9/apache. What are the obvious directories to exclude from backing up? And is this basically a sound backup plan? ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech -- -- Jack LaPlante [EMAIL PROTECTED] Pyroglyph Inc. Clarity and Style For the Digital Age pyroglyph.com pwx.com uneasychair.com ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] Printer Recommendation?
On Sunday 14 November 2004 16:13, Mark K. Kim wrote: [snipped for clarity] > For my parents, I got them a Lexmark all-in-one (inkjet) printer, but it > has absolutely no Linux suport. Lexmark is generally bad with Linux > support, apparently. But I could still print to that printer from my > Linux box via the LAN using some postscript wrapper driver. That still > needs the printer to be hooked up to a Windows box, though. Can you please explain how you did this? I would like to print to a Canon Multipass printer attached to a windows box on my network. [snipped for clarity] ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] Printer Recommendation?
Yeah, I agree with the others. HP's inkjet quality is not as good as some of the other vendors. When I was working, we had an old Xerox printer and the latest greatest HP all-in-one printer and the Xerox beat HP in printer quality hands-down no contest oh-so-obvious when we tried to print business cards on glossy paper. I'd buy HP inkjet only because it's easier finding compatible Linux driver, but since Rod and Rick has some good references for other vendors I wouldn't even think about HP inkjet. HP *laserjet* (1100) has been really good for me, though, except for that one time but it turned out to be a manufacturing defect and HP took the first step to contact me before I thought about contacting them (one of the good things about registering your product.) Everything's working peachy now, and I'm still using a toner from ~3 years ago that I got from OfficeMax at discounted price because it was mispriced and I called it on them... =) For my parents, I got them a Lexmark all-in-one (inkjet) printer, but it has absolutely no Linux suport. Lexmark is generally bad with Linux support, apparently. But I could still print to that printer from my Linux box via the LAN using some postscript wrapper driver. That still needs the printer to be hooked up to a Windows box, though. For me, the hardest part about shopping for inkjet printers is that most computer places that I shop at lack choice. Since I look for printers other than HP, that limits my choice quite a bit. These days I look for all-in-one (with fax capability if at all possible) since the price difference is so little and you get all other stuff with the printer. That limits the choice to about 2-3 printers per store (with half of them without fax capability), none of which are listed in the Linux compatibility chart I take with me (if I take one.) So I generally pick one based on the vendor, which usually turns out to be incompatible with Linux. That seems to be same with every piece of hardware these days. It's much easier if you buy online, though. Anyway, something to think about! -Mark On Sun, 14 Nov 2004, Robert G. Scofield wrote: > I was wondering if someone could recommend an inkjet printer for Linux use. > > My printer will cost more to repair than it will cost for me to buy a > new one. I'm not using Linux now because of a motherboard problem. I'm > a 100% Windows98 user. But I will get a new computer as soon as I get > the money, and so need to plan for future Linux use. > > As a Windows user I'm leaning toward Epson. I've heard that the inks > are better than HP inks in that they do not run as much if the paper > gets wet. In addition, Epson has 3 or 4 separate color ink cartridges. > So if you run out of yellow you get a yellow cartridge instead of having > to pay $40 or so for one color cartridge like you have to do with an HP. > > As a past and future Linux user I'm leaning toward HP because HP makes > Linux drivers. SuSE 9.0 had the HP drivers and it was nice being able > to easily choose different printing options. I don't know whether or > nor there is as much driver support for an Epson. > > So what do people recommend for Linux? > > Thank you. > > Bob > > ___ > vox-tech mailing list > [EMAIL PROTECTED] > http://lists.lugod.org/mailman/listinfo/vox-tech > -- Mark K. Kim AIM: markus kimius Homepage: http://www.cbreak.org/ Xanga: http://www.xanga.com/vindaci Friendster: http://www.friendster.com/user.php?uid=13046 PGP key fingerprint: 7324 BACA 53AD E504 A76E 5167 6822 94F0 F298 5DCE PGP key available on the homepage ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] What not to backup on RH9/apache
I've done some preliminary reading on rsync, it seems like what I want. I'm still curious about which are the obvious RH9 directories that change too often or are devices etc. and should not be backed up. Rod Roark wrote: I think you want to read up on rsync. You can get it to copy only what's changed, so you don't have to worry so much about excluding things. -- Rod On Sunday 14 November 2004 12:23 pm, Jack LaPlante wrote: I used to host about 12 clients by reselling CIHost shared accts, now I have my own dedicated server (at 1and1.com) and have been moving clients to it over the past few months. CIHost claims nightly backups, but when a drive failed there a couple of weeks ago, the most recent backup they had was 9 months old. My best customers were still on that drive and were quite pissed off! So now I am setting up a backup regime on my dedicated server. I'm buying the backup server from 1and1, and it is accessible only by logging in from my root server. There's no bandwidth charge for ftping on their internal network. I guess I will use tar to create a local archive on the root server, then ftp the compressed archive to the backup server. I'm assuming I can automate this with bash scripts and cron. Basically, I want to be as all-inclusive as I can, so if my HD fails there will be as little interuption as possible. So I thought I would include everything *except* certain directories. The root server is RH9/apache. What are the obvious directories to exclude from backing up? And is this basically a sound backup plan? ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech -- -- Jack LaPlante [EMAIL PROTECTED] Pyroglyph Inc. Clarity and Style For the Digital Age pyroglyph.com pwx.com uneasychair.com ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] uhci memory problem
Hmm... I donno. Can you post `lspci -vv` output and can you check your BIOS to see if that memory region is occupied or reserved? You might also wanna try disabling the sound card from your BIOS and see if that does anything. Oh, and look up your motherboard model & usb issues on google... Otherwise I'm out of ideas!! =( -Mark On Sun, 14 Nov 2004, Nick Schmalenberger wrote: > Thanks. > >Just guesting, but probably another device is using that I/O region. >Try > >taking out some of the PCI devices and see if that helps. If it >does, try > >shuffling the problematic PCI device to another PCI slot -- >it may or may > >not help. > My system is a laptop, and my usb controller is integrated. The only > removable device it has is the network card. I tried removing it, but it > didn't help. Anyway, it's io ports are in the 4000s, not the f000s where > my usb controller is. I will append my /proc/ioports, but I can't see > any overlaps or anything obviously wrong. The range for the usb > controller is fca0 to fcbf. Maybe that is too small or something. The > ide controller and sound card are below and above. The sound card is > also below because it has several ranges. Why does it use so much? What > are the regions anyway, in relation to the io port ranges? > > So, here is my /proc/ioports: > -001f : dma1 > 0020-0021 : pic1 > 0040-0043 : timer0 > 0050-0053 : timer1 > 0060-006f : keyboard > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : ide1 > 01f0-01f7 : ide0 > 02f8-02ff : serial > 0376-0376 : ide1 > 03bc-03be : parport0 > 03f6-03f6 : ide0 > 03f8-03ff : serial > 04d0-04d1 : pnp 00:0b > 0760-0760 : pnp 00:00 > 07bc-07be : parport0 > 0cf8-0cff : PCI conf1 > 1000-103f : :00:02.3 > 1000-103f : motherboard > 1000-1003 : PM1a_EVT_BLK > 1008-100b : PM_TMR > 100c-100f : GPE0_BLK > 1010-1015 : ACPI CPU throttle > 1040-105f : :00:02.3 > 1040-104f : motherboard > 1040-104f : pnp 00:0b > 1050-105f : motherboard > 1050-1051 : PM1a_CNT_BLK > 4000-40ff : PCI CardBus #02 > 4000-40ff : :02:00.0 > 4000-40ff : 8139too > 4400-44ff : PCI CardBus #02 > 4800-48ff : PCI CardBus #06 > 4c00-4cff : PCI CardBus #06 > f800-f8ff : :00:06.0 > fc58-fc5b : :00:07.0 > fc58-fc5b : ESS Solo-1 > fc5c-fc5f : :00:07.0 > fc5c-fc5f : ESS Solo-1 > fc60-fc6f : :00:07.0 > fc60-fc6f : ESS Solo-1 > fc70-fc7f : :00:07.0 > fc70-fc7f : ESS Solo-1 > fc88-fc8f : :00:06.0 > fc90-fc9f : :00:02.1 > fc90-fc97 : ide0 > fc98-fc9f : ide1 > fca0-fcbf : :00:02.2 //my usb controller > fca0-fcaf : motherboard > fcc0-fcff : :00:07.0 > fcc0-fcff : ESS Solo-1 > > Thanks for any help. > Nick > ___ > vox-tech mailing list > [EMAIL PROTECTED] > http://lists.lugod.org/mailman/listinfo/vox-tech > -- Mark K. Kim AIM: markus kimius Homepage: http://www.cbreak.org/ Xanga: http://www.xanga.com/vindaci Friendster: http://www.friendster.com/user.php?uid=13046 PGP key fingerprint: 7324 BACA 53AD E504 A76E 5167 6822 94F0 F298 5DCE PGP key available on the homepage ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] Printer Recommendation?
Quoting Robert G. Scofield ([EMAIL PROTECTED]): > So what do people recommend for Linux? I would carefully read Grant Taylor's recommendations: http://www.linuxprinting.org/suggested.html He recommends some particular Epson and HP models, and warns against most others. Many of his comments give reasons why the former company, in general, offers better value and support to the Linux community. (Taylor is basically _the_ top expert on Linux printing.) Personally, I think inkjet printers generally are a rip-off for daily use, and therefore unacceptable for that role. People tend to justify them on grounds that (1) the price of admission is low, and (2) they might occasionally want to do colour printing. Thereafter, they get eaten alive by the cost of ink cartridges. This is true even if you try to stick to black and white. If I had an occasional need for colour printing -- I happen not to -- I certainly _would_ buy one, but then not use it for general printing. For that, I'd also acquire some workhorse printer using toner-based printing (laser or LED-based). If pinched for funds, I'd get one used. Concerning the _new-unit_ retail market for monochrome lasers, Taylor says: "Worthwhile lasers begin around $300; at that price level you have several choices." -- Cheers, "Plus ça change" Rick Moenhttp://linuxmafia.com/~rick/pictures/1861-versus-2004.jpeg [EMAIL PROTECTED] P.S.: http://www.sorryeverybody.com/gallery/1/ ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] What not to backup on RH9/apache
On Sun, Nov 14, 2004 at 01:02:39PM -0800, Rod Roark wrote: > > On Sunday 14 November 2004 12:23 pm, Jack LaPlante wrote: > > > > on their internal network. I guess I will use tar to create a local > > archive on the root server, then ftp the compressed archive to the > > backup server. > > I think you want to read up on rsync. You can get it to copy only > what's changed, so you don't have to worry so much about excluding > things. But it's easy enough to do so with the --exclude and --exclude-from rsync options. I usually use a single --exclude-from list with +/- rules. See the man page. -David ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] What not to backup on RH9/apache
I think you want to read up on rsync. You can get it to copy only what's changed, so you don't have to worry so much about excluding things. -- Rod On Sunday 14 November 2004 12:23 pm, Jack LaPlante wrote: > I used to host about 12 clients by reselling CIHost shared accts, now I > have my own dedicated server (at 1and1.com) and have been moving clients > to it over the past few months. CIHost claims nightly backups, but when > a drive failed there a couple of weeks ago, the most recent backup they > had was 9 months old. My best customers were still on that drive and > were quite pissed off! So now I am > setting up a backup regime on my dedicated server. > > I'm buying the backup server from 1and1, and it is accessible only by > logging in from my root server. There's no bandwidth charge for ftping > on their internal network. I guess I will use tar to create a local > archive on the root server, then ftp the compressed archive to the > backup server. I'm assuming I can automate this with bash scripts and cron. > > Basically, I want to be as all-inclusive as I can, so if my HD fails > there will be as little interuption as possible. So I thought I would > include everything *except* certain directories. The root server is > RH9/apache. What are the obvious directories to exclude from backing > up? And is this basically a sound backup plan? ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] Printer Recommendation?
On Sunday 14 November 2004 12:31 pm, Robert G. Scofield wrote: > I was wondering if someone could recommend an inkjet printer for Linux use. Here are a couple of data points. We used to have an Epson C80 which worked OK but used a lot of ink and the cartridges were expensive. A few months ago we replaced it with a Canon i860 and were very pleased with its performance and quality, especially with photos. Also it seems to be much more frugal with the ink and, unlike the Epson, has not had any problems with the cartridges drying out or clogging. However getting Canon's Linux driver for the i860 to work (ftp://download.canon.jp/pub/driver/bj/linux/) was a real pain. If I did it again I'd shell out a few bucks for the driver at http://www.turboprint.de/turboprint.html. We also have an old HP laser printer that gets most of the B&W print jobs - it's much cheaper that way. -- Rod ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
[vox-tech] What not to backup on RH9/apache
I used to host about 12 clients by reselling CIHost shared accts, now I have my own dedicated server (at 1and1.com) and have been moving clients to it over the past few months. CIHost claims nightly backups, but when a drive failed there a couple of weeks ago, the most recent backup they had was 9 months old. My best customers were still on that drive and were quite pissed off! So now I am setting up a backup regime on my dedicated server. I'm buying the backup server from 1and1, and it is accessible only by logging in from my root server. There's no bandwidth charge for ftping on their internal network. I guess I will use tar to create a local archive on the root server, then ftp the compressed archive to the backup server. I'm assuming I can automate this with bash scripts and cron. Basically, I want to be as all-inclusive as I can, so if my HD fails there will be as little interuption as possible. So I thought I would include everything *except* certain directories. The root server is RH9/apache. What are the obvious directories to exclude from backing up? And is this basically a sound backup plan? -- Jack LaPlante [EMAIL PROTECTED] Pyroglyph Inc. Clarity and Style For the Digital Age pyroglyph.com pwx.com uneasychair.com ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
[vox-tech] Printer Recommendation?
I was wondering if someone could recommend an inkjet printer for Linux use. My printer will cost more to repair than it will cost for me to buy a new one. I'm not using Linux now because of a motherboard problem. I'm a 100% Windows98 user. But I will get a new computer as soon as I get the money, and so need to plan for future Linux use. As a Windows user I'm leaning toward Epson. I've heard that the inks are better than HP inks in that they do not run as much if the paper gets wet. In addition, Epson has 3 or 4 separate color ink cartridges. So if you run out of yellow you get a yellow cartridge instead of having to pay $40 or so for one color cartridge like you have to do with an HP. As a past and future Linux user I'm leaning toward HP because HP makes Linux drivers. SuSE 9.0 had the HP drivers and it was nice being able to easily choose different printing options. I don't know whether or nor there is as much driver support for an Epson. So what do people recommend for Linux? Thank you. Bob ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
[vox-tech] (no subject)
list, I just noticed in the archive that my quoted text from Marks message didn't get wrapped for some reason. Maybe it had to do with how I did a fake reply because I get the digest. Sorry. Nick ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] uhci memory problem
Thanks. >Just guesting, but probably another device is using that I/O region. >Try >taking out some of the PCI devices and see if that helps. If it >does, try >shuffling the problematic PCI device to another PCI slot -- >it may or may not >help. My system is a laptop, and my usb controller is integrated. The only removable device it has is the network card. I tried removing it, but it didn't help. Anyway, it's io ports are in the 4000s, not the f000s where my usb controller is. I will append my /proc/ioports, but I can't see any overlaps or anything obviously wrong. The range for the usb controller is fca0 to fcbf. Maybe that is too small or something. The ide controller and sound card are below and above. The sound card is also below because it has several ranges. Why does it use so much? What are the regions anyway, in relation to the io port ranges? So, here is my /proc/ioports: -001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial 0376-0376 : ide1 03bc-03be : parport0 03f6-03f6 : ide0 03f8-03ff : serial 04d0-04d1 : pnp 00:0b 0760-0760 : pnp 00:00 07bc-07be : parport0 0cf8-0cff : PCI conf1 1000-103f : :00:02.3 1000-103f : motherboard 1000-1003 : PM1a_EVT_BLK 1008-100b : PM_TMR 100c-100f : GPE0_BLK 1010-1015 : ACPI CPU throttle 1040-105f : :00:02.3 1040-104f : motherboard 1040-104f : pnp 00:0b 1050-105f : motherboard 1050-1051 : PM1a_CNT_BLK 4000-40ff : PCI CardBus #02 4000-40ff : :02:00.0 4000-40ff : 8139too 4400-44ff : PCI CardBus #02 4800-48ff : PCI CardBus #06 4c00-4cff : PCI CardBus #06 f800-f8ff : :00:06.0 fc58-fc5b : :00:07.0 fc58-fc5b : ESS Solo-1 fc5c-fc5f : :00:07.0 fc5c-fc5f : ESS Solo-1 fc60-fc6f : :00:07.0 fc60-fc6f : ESS Solo-1 fc70-fc7f : :00:07.0 fc70-fc7f : ESS Solo-1 fc88-fc8f : :00:06.0 fc90-fc9f : :00:02.1 fc90-fc97 : ide0 fc98-fc9f : ide1 fca0-fcbf : :00:02.2 //my usb controller fca0-fcaf : motherboard fcc0-fcff : :00:07.0 fcc0-fcff : ESS Solo-1 Thanks for any help. Nick ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
Re: [vox-tech] Samba Printer Issues
On Sunday 14 November 2004 09:01 am, Richard Crawford wrote: > I'm having a truly annoying issue with my printer. It used to be just > fine, but now it's... well, not. I'd suggest you first rule out a hardware problem with the printer. Try hooking it directly to the laptop. -- Rod ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
[vox-tech] Samba Printer Issues
I'm having a truly annoying issue with my printer. It used to be just fine, but now it's... well, not. Here's the setup: Windows XP laptop Print server running RH 8.0 HP 710C printer connected via parallel port Samba 2.something running on the RH server Everything seems to look good; however, when printing a document, any document, it gets about halfway through, then hangs for several minutes before continuing. This started up about six months ago but has never really presented that much of an issue. Here's the output from lpq on the RH machine: [EMAIL PROTECTED]: ~ # lpq Printer: [EMAIL PROTECTED] Queue: no printable jobs in queue Server: no server active Status: job '[EMAIL PROTECTED]' saved at 08:52:14.84 Rank Owner/ID Class Job Files Size Time done [EMAIL PROTECTED] A 902 smbprn.000449.nEpM8j 89114 08:15:13 Samba seems to think that the print job is done. -- Slainte, Richard S. Crawford (http://www.mossroot.com AIM: Buffalo2K) Fitness blog: http://www.mossroot.com/02h The Literate Penguin: http://www.mossroot.com/lp "You can't trust your judgement if your imagination is out of focus." --Mark Twain ___ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech