Re: [WISPA] [Motorola II] Remote porting switch
The other way to do this make the VoIP line live from the start with a temporary number, and then have the telco forward the existing number to the temporary number. After the port, you just remove the temp number from your switch. You've already set the customer CPE and/or your switch to report the ported number caller ID, of course. On 05/31/2011 06:42 AM, Patrick Shoemaker wrote: Just got some of these things in. They look like they'd be handy for those of us doing VoIP so I figured I'd share. When switching a new customer from POTS service to VoIP phone service and transferring their number in, the LNP activation doesn't always occur at the same time as the CPE install. These switches allow for one truck roll and no customer downtime during the LNP job. You wire this box in between the POTS feed from the existing telco and the CPE (inside phone wiring, PBX, etc). Then you wire your VoIP ATA to the switch as well. The switch keeps the CPE connected to the POTS line until it receives a ring signal from the VoIP ATA, then the CPE is connected to the ATA going forward. $10 each through Vetco Supply in Texas (http://www.vetcosupply.com/). They might go lower if buying lots at a time? Here's the manufacturer's product page: http://www.sittelletech.com/RPS3000.html See picture. There are RJ11 ports for telco, CPE, and ATA, as well as a 110 block on the inside for telco and CPE connections. Reset switch allows for testing or reconnection to POTS. -- Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com mailto:shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com - Animal Farm Motorola Users Group - www.afmug.com attachment: bruce.vcf WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] FW: WISPA Bylaws
Not to make suggestions after the fact but In the past, it was realized that flexibilty was lost in setting appropriate dues because there were only a limited number of classes (assoc, principal, vendor). It would make sense to also add to the bylaws and ballot, the ability for the board to set additional classes of membership. The reason for this is... the majority class is currently principle. Currently if the member prospect does not qualify for principle the alternative becomes the lower revenue associate class even if the prospect was a candidate appropriate to pay a higher rate. A class could be used to advertise specific companies as higher contributors, such as a Gold and Platnum principle member (a WISP that is larger or desired to donate more cash in excahnge for good will). As well additional classes could be used to allow a membership without certain privilages that other WISPs might have. For example which Lists they have access to. (An example of that might have been the WCA 3650 issue, where a telco might want to join to work on a specific project, but may not qualify as a typical WISP). Adding Classes, enables the ability to target alternate revenue streams, other than to raise principle member's dues, and without compromising principle member's voting power and association focus. Alternatively, it would work to give the ability to add sub-classes, that allowed fine tuning of rights or dues per that specific sub-class. For example, manufacturer versus service provider versus investor. Or WISPs under 500sub, 500-5000, and Large National providers 5000. Or Associate of government versus non-profit versus consultant, versus press, versus newbie exploring wireless. I'm not suggesting defing classes now, just suggesting board given the ability to add classes, if needed in the future. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Victoria To: 'WISPA General List' Sent: Monday, May 30, 2011 11:35 AM Subject: [WISPA] FW: WISPA Bylaws Dear Members, This election, you are going to be presented with proposed changes in the WISPA Bylaws. Rick has posted these changes: http://www.wispa.org/?page_id=4752 Please take a moment and be familiar with them. If you have any questions, please email to: wispabyl...@wispa.org Thanks and have a great Memorial Day! Best regards, Victoria Proffer President/CEO St. Louis Broadband, LLC 314-974-5600 2010 - 2011 Board of Directors Committee Chairs - Bylaws | National Disaster | State Coordinators |Missouri State Coordinator -- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/image001.gif WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] FW: WISPA Bylaws
I will take a bylaws change to add different "classes" to each membership level. As the current bylaws read, each membership level has to be charged at the same rate. That is part of why we did the dues increase the way that we did them. Our intention is to make that change to the bylaws in order to implement the different classes next year, but we could not do it this time around. Matt Larsen vistabeam.com On 5/31/2011 9:50 AM, Tom DeReggi wrote: Not to make suggestions after the fact but In the past, it was realized that flexibilty was lost in setting appropriate dues because there were only a limited number of classes (assoc, principal, vendor). It would make sense to also add to the bylaws and ballot, the ability for the board to set additional "classes"of membership. The reason for this is... the majority class is currently "principle". Currently if the member prospect does not qualify for "principle" the alternative becomes the lower revenue "associate" class even if the prospect was a candidate appropriate to pay a higher rate.A class could be used to advertise specific companies as higher contributors, such as a Gold and Platnum principle member (a WISP that is larger ordesired to donate more cash in excahnge for good will). As welladditionalclasses could be used to allow a membership without certain privilages that other WISPs might have. For example which Lists they have access to. (An example of that might have been the WCA 3650 issue, where a telcomight want to join to work on a specific project, but may notqualify as a typical WISP). Adding Classes, enables the ability to target alternate revenue streams, other than to raise principle member's dues, and without compromising principle member's voting power and association focus. Alternatively, it would work to give the ability to add "sub-classes", that allowed fine tuning of rights or dues per that specific sub-class. For example, manufacturer versus service provider versus investor. Or WISPs under 500sub, 500-5000, and Large National providers 5000. Or Associate of government versus non-profitversus consultant, versus press, versus newbie exploring wireless. I'm not suggesting defing classes now, just suggesting board given the abilityto add classes, if needed in the future. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Victoria To: 'WISPA General List' Sent: Monday, May 30, 2011 11:35 AM Subject: [WISPA] FW: WISPA Bylaws Dear Members, This election, you are going to be presented with proposed changes in the WISPA Bylaws. Rick has posted these changes: http://www.wispa.org/?page_id=4752 Please take a moment and be familiar with them. If you have any questions, please email to: wispabyl...@wispa.org Thanks and have a great Memorial Day! Best regards, Victoria Proffer President/CEO St. Louis Broadband, LLC 314-974-5600 2010 - 2011 Board of Directors Committee Chairs - Bylaws | National Disaster | State Coordinators |Missouri State Coordinator WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/
[WISPA] Fire in Ubiquiti manufacturing plant?
I heard Apple had a fire in one of their plants, did this effect Ubiquiti production? Does anyone know about this or can confirm if its true? -- John M. McDowell Boonlink Communications 307 Grand Ave NW Fort Payne, AL 35967 256.844.9932 j...@boonlink.com www.boonlink.com This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy, re-transmit, or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail j...@boonlink.com, and delete the message. E-mail communication is highly susceptible to spoofing, spamming, and other tampering, some of which may be harmful to your computer. If you are concerned about the authenticity of the message or the source, please contact the sender directly. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [Motorola II] Fire in Ubiquiti manufacturing plant?
Awesome, thank you. Was hoping there wasn't, just wanted to know if I needed to stock up. On Tue, May 31, 2011 at 3:23 PM, Ben Moore ben.mo...@ubnt.com wrote: Hi Guys, No, there have not been any fires in any of the manufacturing plants we work with. Thanks, Ben Moore *From:* motor...@afmug.com [mailto:motor...@afmug.com] *On Behalf Of *John McDowell *Sent:* Tuesday, May 31, 2011 2:19 PM *To:* Principal WISPA Member List; WISPA General List; motor...@afmug.com *Subject:* [Motorola II] Fire in Ubiquiti manufacturing plant? I heard Apple had a fire in one of their plants, did this effect Ubiquiti production? Does anyone know about this or can confirm if its true? -- John M. McDowell Boonlink Communications 307 Grand Ave NW Fort Payne, AL 35967 256.844.9932 j...@boonlink.com www.boonlink.com This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy, re-transmit, or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail j...@boonlink.com, and delete the message. E-mail communication is highly susceptible to spoofing, spamming, and other tampering, some of which may be harmful to your computer. If you are concerned about the authenticity of the message or the source, please contact the sender directly. -- John M. McDowell Boonlink Communications 307 Grand Ave NW Fort Payne, AL 35967 256.844.9932 j...@boonlink.com www.boonlink.com This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy, re-transmit, or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail j...@boonlink.com, and delete the message. E-mail communication is highly susceptible to spoofing, spamming, and other tampering, some of which may be harmful to your computer. If you are concerned about the authenticity of the message or the source, please contact the sender directly. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Towers
Wasn't blown down in tornado i promise :-D On Fri, May 27, 2011 at 8:59 PM, Mike Hammett wispawirel...@ics-il.netwrote: I'm not buying any tower on the ground in Alabama. :-p - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com On 5/27/2011 10:18 AM, John McDowell wrote: I've got an eastpointe self supporter on the ground I'll sell. 120', 4-5' wide at base. Strong towers, solid steel construction, all welded. John M. McDowell Boonlink Communications 307 Grand Ave NW Fort Payne, AL 35967 256.844.9932 Office j...@boonlink.com www.boonlink.com This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy, re-transmit, or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail j...@boonlink.com, and delete the message. E-mail communication is highly susceptible to spoofing, spamming, and other tampering, some of which may be harmful to your computer. If you are concerned about the authenticity of the message or the source, please contact the sender directly. On May 25, 2011, at 2:58 PM, Blair Davis wrote: A few weeks ago, we wee talking about tower pricing... Today, I find myself in need of pricing for a 80-100 ft freestander we can rebar and pour our own foundation and put it up, just need the tower kit it will carry some M900 sectors and a backhaul... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- John M. McDowell Boonlink Communications 307 Grand Ave NW Fort Payne, AL 35967 256.844.9932 j...@boonlink.com www.boonlink.com This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy, re-transmit, or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail j...@boonlink.com, and delete the message. E-mail communication is highly susceptible to spoofing, spamming, and other tampering, some of which may be harmful to your computer. If you are concerned about the authenticity of the message or the source, please contact the sender directly. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/