I've installed the new 2.6.4 kernel on my mdk 9.2 distro and alsa 1.0.3 from
the tarball of the alsa page.
But when I use the sound thought XMMS or mpg123 or else, everyting freezes
and I have to push the reset button (sysrq dont work).
Everything is functionnal (I can hear music) ONLY when I
Matt Middleton wrote:
I posted earlier about problems with midi and the intel 8x0. I
thought the midi device listed was a sequencer, but I guess thats
not the case. Is the mpu uart device just for a hardware midi
interface?
Yes, the MPU-401 is a hardware MIDI interface which isn't useful
Hello,
i have Alsa 1.0.3 installed on Redhat 8.0 with a Hoontech XG.
The Sound is very good, but after every reboot i must make amixer set
IEC958 unmute.
Is there no way to save this settings???
Greetings
Juergen
---
This SF.Net email is
Hi,
I've got a RME 96/8 PAD, and I try to create a virtual
device with asoundrc, which would allowed me to have
both the stereo device and the adat one at the same
time in JACK.
He's my asoundrc:
pcm.rme_stereo {
type hw
card 0
device 0
}
ctl.rme_stereo {
type
juergen wrote:
i have Alsa 1.0.3 installed on Redhat 8.0 with a Hoontech XG.
The Sound is very good, but after every reboot i must make amixer set
IEC958 unmute.
Is there no way to save this settings???
alsactl save, and alsactl restore restores them. These commands
should go into some
I've installed the new 2.6.4 kernel on my mdk 9.2 distro and alsa 1.0.3 from
the tarball of the alsa page.
But when I use the sound thought XMMS or mpg123 or else, everyting freezes
and I have to push the reset button (sysrq dont work).
Everything is functionnal (I can hear music) ONLY when
On Wed, Mar 24, 2004 at 04:03:39PM -0500, Steve Jones wrote:
On Wed, Mar 24, 2004 at 07:48:21PM +0100, Jaroslav Kysela wrote:
On Wed, 24 Mar 2004, Steve Jones wrote:
I've tried every reasonable combination, but I still
capture nothing from those inputs. I've tried 'PCM Capture
I have an ISA Ensoniq Soundscape card (circa 1995-6) that I can't get
to work.
The BIOS recognizes it:
Initializing Plug and Play Cards
Card-01: ENSONIQ Soundscape
isapnp recognizes it:
isapnp: Scanning for PnP cards
isapnp: Card 'ENSONIQ Soundscape'
isapnp: 1 Plug Play card
tommi,
when i choose 'digital mix' i get neither input nor output. i assume this is
the key bit preventing me from doing mixing (two applications playing sound
simultaneously is what i have in mind).
Do you see any movement in the vu-meters? Make sure you have your dac
volumes up.
I compiled ALSA 1.0.3 on my Red Hat 7.3 box last week (./configure
--with-cards=cmipci --with-sequencer=yes;make;make install). I cannot get
Midi to function. The midi modules load up fine but when I try to play a
midi file I get:
Using playmidi:
open /dev/sequencer: No such device
But it does
I tried using both pmidi and aplay midi and I get the
exact same results. One thing that is weird is that
classical midis seem to play fine, or at least better
than rock midis. The rock midis play fine in windows,
however, using the microsoft synthesizer. Even on the
rock midis it seems liek
Steve Corwin wrote:
Clemens Ladisch wrote:
[EMAIL PROTECTED] wrote:
Only now when I play audio CDs with KsCD, they show as playing but
I don't hear anything.
KsCD simply instructs your CD drive to start playing. If there isn't
a cable between the analog output of the CD drive and
I have switched over from a Thinkpad 390E to a Thinkpad 390X. The
hardware is virtually identical between the two models, but I'm having
trouble on the 390X. Sound playback is 1/3 to 1/4 normal speed, and
even the slow slow is kinda 'chirpy' and choppy. All other hardware
works fine.
I'm
13 matches
Mail list logo