Hi all:
My gps is using spi interface an how I setup infrastructure for pps in
this case.
I have dts for gpio0_7 to be in dts file what else do I need .
thanks
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google G
I am currently struggling to get SPI enabled on my Beaglebone Black. I am
running the most recent Debian distribution and have tried just about every
conceivable way to try and get SPI enabled. The reason why I want to get
SPI enabled is so that I can use the TRF7960/A RFID reader from TI. A few
I have spent the last few days trying to troubleshoot and properly enable
SPI on my Beaglebone Black so that I can use the TRF7960/A RFID reader. A
few years ago a group of interns made a cape for the Beaglebone
specifically for this RFID reader
(http://elinux.org/BeagleBone_Black_RFID_Adaptor_
It's not a quirk of the driver, that you have to set SPI_CLK as an input
even when the Sitara is master: It's the hardware. The SPI puts the
SPI_CLK out for its MOSI data, but it needs the SPI_CLK to clock in its
MISO data from the slave. The bit that you are calling "input" does not
make th
On 16/07/14 17:08, geetha wrote:
> I am new to Beaglebone & not too familiar with Linux.
>
> My application requires data to be acquired from a device on SPI &
> transmit it on LAN.
>
> I am using the preloaded Angstrom OS.
>
> I have setup the environment for development by precisely following
I am new to Beaglebone & not too familiar with Linux.
My application requires data to be acquired from a device on SPI & transmit
it on LAN.
I am using the preloaded Angstrom OS.
I have setup the environment for development by precisely following
http://jkuhlm.bplaced.net/hellobone/
With