> On Sep 4, 2016, at 21:39, Kyle Owen wrote:
>
> Just thought I'd share with you all one of my pet projects for the past few
> years. I have written an HP-35 and HP-45 simulator for the PDP-8, which
> uses the original microcode from these calculators. Thus, it is just as
> accurate as the origi
>
> On Thu, Aug 18, 2016 at 8:56 AM, Noel Chiappa
> wrote:
> > So, I've been working for a while on a page about DEC indicator panels
> (the
> > standardized 36x4 light arrays which go into a 19" rack, with an inlay to
> > customize it to a particular device). It's online now, here:
> >
> > http
Just thought I'd share with you all one of my pet projects for the past few
years. I have written an HP-35 and HP-45 simulator for the PDP-8, which
uses the original microcode from these calculators. Thus, it is just as
accurate as the original calculators, I would believe.
Not really sure why I d
> On Sep 4, 2016, at 6:08 PM, william degnan wrote:
>
> Even better, I found this post, this is my how to attach a vt100 to a VAX
> 4000, you can apply to most any case
Hi Bill,
Thanks for you help!
I will say that I have the getty running fine, baud rate, serial format, etc.
all okay. Wor
Hi Mark,
On Sun, Aug 28, 2016 at 6:19 PM, Mark G Thomas wrote:
>
> The difficulty I am having is I would like to configure the system with
> both MSCP controller cards installed, so I can boot from either SCSI or
> floppy, preferably with the SCSI still starting at DU0 so my BSD2.11 CFs
> remain
On Sep 4, 2016 9:03 PM, "william degnan" wrote:
>
>
> On Sep 4, 2016 8:10 PM, "Fritz Mueller" wrote:
> >
> > Hi all —
> >
> > I’m trying to run a real-deal vt100 on a serial port connected to Linux
(Xubunto 16.04). I’ve got this working *pretty* well, but it looks like
the padding values in the
On Sep 4, 2016 8:10 PM, "Fritz Mueller" wrote:
>
> Hi all —
>
> I’m trying to run a real-deal vt100 on a serial port connected to Linux
(Xubunto 16.04). I’ve got this working *pretty* well, but it looks like
the padding values in the default vt100 terminfo entry are not quite
correct — when runni
Hi all —
I’m trying to run a real-deal vt100 on a serial port connected to Linux
(Xubunto 16.04). I’ve got this working *pretty* well, but it looks like the
padding values in the default vt100 terminfo entry are not quite correct — when
running the vt100 at 9600 I still get occasional garbage
On 03/09/2016 23:27, "John Robertson" wrote:
>>> Similar size - then no problem! But, some new cap types are
>>> VASTLY smaller than the caps from 40 years ago.
>> Hence my question, I'll stick with the same size but higher voltage.
>>
>> Cheers!
>>
>
> You do have to consider where in the ci
I have a nice, clean DG MPT/100 I'm in the process of restoring. As you
might expect, I contacted Bruce at "Wild Hare" to see what
documentation and software he had for the critter.
He was able provide some helpful PDF documentation - but NO schematic or
software.
Without software, the MPT/100 is
I wrote:
> Mouser has some in
> stock, e.g., the IS41C16105-50KLI in SOJ-42 package at $7.20 each
> (quantity one) or the IS41C16105-50TLI in TSOP-44 package at $7.02
> each (quantity one).
On Fri, Sep 2, 2016 at 12:44 PM, Paul Koning wrote:
> The ISSI memory calls itself "DRAM with fast page mod
I found a simple manual for a "System 2400" 24 bit computer. Can be
downloaded here: http://dvq.com/docs/dcs2400o.pdf
There's a reference to "dcs 2400" and on the title page, "Digital
Computer" from the rep. Gene Baumgardner.
Does anyone have more info on this computer, or the company who mad
On 01/09/16 04:11, Glen Slick wrote:
> Grammar Engine PromICE units show up on eBay from time to time in the
> US sometimes around the $20 range for just the box alone. Then you
> need to supply your own power adapter and ribbon cable DIP plug
> adapters.
Ahh - I hadn't heard of the PromICE.
Than
On 01/09/16 13:00, Alexandre Souza wrote:
>
>Can't you roll your own? It is SO easy to build one, if you don't
> mind the hassle!?
I was looking at that option, but I still have repressed memories from
the last one I designed :P
Getting the PCB layout onto two layers was hell.
If I did it a
Episode 5, still does not boot, but we are starting to follow long why:
https://youtu.be/Wr7vDZpniNIr
Marc
> On Jul 31, 2016, at 6:12 PM, CuriousMarc wrote:
>
> Next Episode:
> https://youtu.be/EDw8U1a6s78
> http://www.righto.com/2016/07/restoring-y-combinators-xerox-alto-day_31.html
> Marc
>
I try very hard to match physical size and since, as has been noted, that
usually means higher working voltage, it's not a negative. If you're
preserving something as an historical artifact, be sure to document what
you've done! Otherwise, someone will be really confused 10-20 years from
now when
Both these locations are NW of Baltimore, Maryland. I have no relationship with
either seller but am willing to do in-person recon for people on this list if
required.
Large lot of Apple stuff, $1200
Mostly Macs but a good amount of Apple II stuff (including a //c with all
original boxes and pa
On 09/03/2016 10:07 AM, Adrian Graham wrote:
On 03/09/2016 17:39, "Jon Elson" wrote:
On 09/03/2016 10:56 AM, Noel Chiappa wrote:
From: Jon Elson
needs new caps since one of the 1000uF 16V ones has bulged badly.
...
If I go up to 25V I can get 16mm diameter which is the size of the old
ones.
18 matches
Mail list logo