frame-relay design

If you had 3 locations in a hub and spoke topology, then you would want two pvcs going to each site...(using subinterfaces), how do the numbers change as you add remote sites... e.g. if you add the 4th site, do you have to add a pvc to every other site?, totalling 3 pvcs/subinterfaces ? so would

what does this command do?

yes, I did search on cco, found nothing. #? Exec commands: {snip} restart Restart Connection {snip} = ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH... __ Do You Yahoo!? Yahoo! Photos -- now, 100 FREE prints! htt

mysterious lines

What are all of these mysterious lines ? 0-134 ? 1 con + 1 aux + ???tty +5 vty =135 ? please enlighten me btw when i entered in exec-timeout 0 0 it seemed to affect all of the lines ** C3640#conf t Enter configuration commands, one per lin

e: Loopback - why needed ?

if you did no keepalives on an ethernet it would do the same thing (despite caveats) would it not? also, is there any scenario that you would have / advertise a route to loop0? XX A loopback interface will only go down if the entire router goes down. L

load-sharing

ok... here goes... as i understand it, if you have multiple routes with the same Specifity, Admin distance, and Metric then (most?) dynamic routing protocols will load balance... and if you add yet another static route to that destination, (not necisarrilly with the same specifity/admin dist/metr

more specific route & CEF

can someone give me an example of a route that would be overwritten (as opposed to simply added to) by a more specific route? (in a rib) also, i have read about CEF, but I am not getting the whole jpeg on it... is it just another in the way to long series of process/fast/silicone(sp)/autonemo

directed broadcast route

it appears to be possible to do an " ip route 0.0.0.0 0.0.0.0 10.255.255.255 " or some other directed broadcast.. does this work? ever seen it before? if this went out on an ethernet segment, and there were 2 other routers (or more) what would happen... = ciscocabanaboy, CCNP-Voice, CCDP,

RE: cisco voip in a nut shell

i was to worked up to actually make the request, does anyone have a quote cisco voip dummies guide? --- Chuck Larrieu <[EMAIL PROTECTED]> wrote: > Lucky you! :-> > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of

req: cisco voip in a nut shell

I work with a bunch of bleeping retards that need to configure basic dial-peers / voice ports... and they also need to have a ""quick reference "" guide to typical trouble shooting commands (i.e. show bleeping call voice port active monkey bleeps)because they are to bleeping lazy and bleep

full meshed ip unnumbered network

sorry if i sent this twice, it seems like our mailing list is having trouble :( here is the design: ETHERNET | 1XXX /\ / \ 2XXX 3XXX - /

full meshed ip unnumbered network

here is the design: ETHERNET | 1XXX /\ / \ 2XXX 3XXX - / \ ETHERNET ETHERNET the three routers are seperated by point to poi

destination address on point to point

if you ip route 0.0.0.0 0.0.0.0 e0 what dest mac address does it put in the header? ? = ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH... __ Do You Yahoo!? Yahoo! Photos -- now, 100 FREE prints! http://photos.ya

routing to an interface

ip you set up a default ip route to e0(on a point to point), what is the destination mac address? also, does it change anything if it is a shared segment? ip route 0.0.0.0 0.0.0.0 e0 = ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH... ___

atm question

in what hardware do the following manifest themselves? lec-- atm aware pc's, cat 5000? lecs-- atm aware server ? bus-- atm aware server ? les-- atm aware server ??? is this right? or do you run these service off of cisco gear? if they are servers, where does the software come from that does the

atm vpi question

can you only have one "virtual path" on a peticular phisical wire? (i know that you can obviously have lots of vci's) = ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH... __ Do You Yahoo!? Send instant messages & get email

configuring atm interfaces on a router

does anyone have a good link on how to do this (one that is pertinant to the CATM test)? = ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH... __ Do You Yahoo!? Send instant messages & get email alerts with Yahoo! Messenger.

favorite ccie study book

what is your favorite book for the ccie? I have seen alot of reccomended book lists... but i dont have time to read 15 books my favorite one so far is "interconnections", radia pearlman (sp?) = ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH... ___

RE:

TED]> wrote: > Beats me. Routers are down. Any hint is you do a > connect ? what is the > output there? > > Chuck > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of > cisco cabanaboy > Sent: Wednesday, May 31, 2000 1:02

No Subject

what is the global config command "connect" for ? C2600-REG4-1(config)#? Configure commands: ... connect cross-connect two interfaces controller Configure a specific controller default Set a command to its defaults default-value

CATM Test

I am going to take the CATM test this weekend, and I was wondering if anyone could tell me if there are type in questions?, any other info/links would be welcome. Thank you ciscocabanaboy CCNP-voice, CCDP... = ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH...

BGP

Is BGP DV, or LS? = ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH... __ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.yahoo.com/ ___ UPDATED Posting Guidelines: ht

startup-config file open failed

anyone seen this before? C2600#wr mem Warning: Attempting to overwrite an NVRAM configuration previously written by a different version of the system image. Overwrite the previous NVRAM configuration?[confirm] startup-config file open failed (Device or resource busy) = ciscocabanaboy,

router on a stick

anyone got a good link that shows a sample config for an inter v-lan routing "router on a stick" ? = ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH... __ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.

CCNP-ATM

I was wondering if anyone could tell me if "CATM 2.1 Cisco Campus ATM Solutions 640-446" is worth taking to help someone out with the atm portion of the ccie r/s lab, also is it hard(the atm exam) ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+... ___

CCIE-Voice

has any one heard about this cert??? __ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives,