>From Cisco's web site, it doesn't look like the WIC-2T is supported in
the NM-1E2W. The doc on the WIC-2T only lists the following:
NM-1FE1R2W
NM-1FE2W
NM-2FE2W
NM-2W
The same doc says that the WIC-2T isn't supported in the following:
Cisco 1600
NM-1E2W
NM-1E1R2W
NM-2E2W
Sorry.
-Original
Hi,
WIC-2T is supported on 3660/3640/3620 if the following modules
are installed on the 3660/3640/3620:
NM-1FE2W,NM-1FE1R2W,NM-2FE2W,and NM-2W
WIC-2T is not supported on the following modules on 3660/3640/3620:
NM-1E2W, NM-1E1R2W,and NM-2E2W
Regards,
Georg
Message Posted at:
http://www.g
> I have a 3620 with 64 MB RAM 16 MB Flash. I installed module NM-1E2W and
it
> works fine, but when I install the
> WIC-2T in either WAN slots it doesn't recognize it. The WIC-2T works on my
> 1720 and 2610. I've tried 2 different IOS already
> (IOS 12.2 Enterprise Plus IPSec 56 and 12.1 IP Plus
You guys are great and saved me a ton of time!
have a great day!
"tmjf.com" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have a 3620 with 64 MB RAM 16 MB Flash. I installed module NM-1E2W and
it
> works fine, but when I install the
> WIC-2T in either WAN slots it doesn't r
According to Cisco's HW/SW compatibility matrix, you need one of the
following IOS versions to support a WIC-2T on a 3620:
12.0(7)XK, 12.1(1)T, 12.1(5)YB, 12.2(1), 12.2(2)T, 12.2(2)XT
Don't assume that if you try a later version of IOS that it's definitely
going to support your card. Try to g
You also need a nm with a fast eth interface.
-Original Message-
From: Craig Columbus [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 15, 2002 8:02 AM
To: [EMAIL PROTECTED]
Subject: Re: Help !! 3620 + NM-1E2W + WIC-2T = trouble [7:31976]
According to Cisco's HW/SW compatib
6 matches
Mail list logo