it has nothing with the VPN tunnel but everything to do with DNS. if you
specify the
IP address in the /etc/hosts file, that will speed it up very quickly. I
have the same
setup like yours with the exception that I have "franken" pixes (Pix520) on
both ends
By the way, use version 6.2(2) on the p
Mike,
How are the PIXes connected? If via a crossover, you might be
experiencing excessive collisions. I've tested a similar configuration
as well, and I've found that placing a switch in between the two PIXes
will eliminate the collisions.
Ed
-Original Message-
From: [EMAIL PROTECTED]
In answer to Eric, there is not any DNS involved as the traceroute is IP
only... no name resolution needed.
In answer Ed's comments, I have both plugged into a switch and so it's not
*back to back* in the normal sense of the word.
MikeS
Message Posted at:
http://www.groupstudy.com/form/read.php
Check for duplex and speed settings on switch as well as interface errors
and collisions.
""Mike Sweeney"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> In answer to Eric, there is not any DNS involved as the traceroute is IP
> only... no name resolution needed.
>
> In answer Ed
Is ping that slow too? What else did you try? FTP? TFTP? Traceroute and
Telnet are sort of weird ways of testing response time, but a good start.
Can you put a sniffer on one of the Windows machines and see where the
delays are actually occuring?
Try to distinguish between a "slow network" an
What eric is refering to is a couple different items. One is the forward
lookup of the name given on the command prompt, which I don't recall any
traceroute implementations which cause high latency for that.
Secondly is the reverse lookup many traceroute's will do if you give an IP
address as the
Darrell-
I like the tidbit about reverse lookup with traceroute.. I always wondered
why the Sun boxes were so slow at times during pings . Now I need to fire up
the sniffer and the x86 Solaris and see what I can see :) It would be my
luck that the x86 Solaris is different ..
Anyways.. this config
Well..well..well.. in a way I feel like idiot.. but in another it was a very
much a learning experience.
After checking over everything and recreating the 800mS to 2 second delays,
I found the problem.
When I first set up the lab, I spent some time working with the debugs for
ipsec, isakmp and ic
8 matches
Mail list logo