On Tue, 26 Mar 2002, Henrique Helder wrote:
> >ide-scsi is going to probably put the dev at /dev/sgX, rather than hdc
> >
> >removing and adding mesh on my system, with an external CDR:
> >
> >scsi0 : MESH
> >mesh: target 6 synchronous at 5.0 MB/s
> > Vendor: MATSHITA Model: CD-R CW-7503
>ide-scsi is going to probably put the dev at /dev/sgX, rather than hdc
>
>removing and adding mesh on my system, with an external CDR:
>
>scsi0 : MESH
>mesh: target 6 synchronous at 5.0 MB/s
> Vendor: MATSHITA Model: CD-R CW-7503Rev: 1.06
> Type: CD-ROM ANSI
i've got the same output here and my cdrom dosen't work.. i got some error
before about supermount but i for got what error exactly...
mike
>From: "Henrique Helder" <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: <[EMAIL PROTECTED]>
>Subject
Normally the first scsi cdrom is at /dev/scd0. /dev/sg is for all scsi
device, without make the difference between type of device, it can be
scanner, hd, ect...
Le Mardi 26 Mars 2002 01:54, Stew Benedict a écrit :
> On Mon, 25 Mar 2002, Henrique Helder wrote:
> > >You can see if the kernel saw
>You can see if the kernel saw the CDROM with:
>
>dmesg | grep hdc (is it hdc on these machines?)
>
>On my Lombard:
>
>[root@powerbook-cooker templates]# ls -l /dev/cdrom
>lr-xr-xr-x1 root root 13 Mar 25 03:18 /dev/cdrom ->
>cdroms/cdrom0
>
This is what i got:
[root@hilands r
On Mon, 25 Mar 2002, Henrique Helder wrote:
>
> >You can see if the kernel saw the CDROM with:
> >
> >dmesg | grep hdc (is it hdc on these machines?)
> >
> >On my Lombard:
> >
> >[root@powerbook-cooker templates]# ls -l /dev/cdrom
> >lr-xr-xr-x1 root root 13 Mar 25 03:18 /dev
On Mon, Mar 25, 2002 at 12:19:28PM -0500, Stew Benedict wrote:
> While I had the TiBook, I should have looked more at the modem, I know it
> wasn't detected during the test installs here, but it may be the same case
> as the ibook2, a "soft" modem. The cdrom was setup fine here, with devfs.
The T
On Mon, 25 Mar 2002, Henrique Helder wrote:
> Hi All,
>
> I'm trying install Mandrake 8.2b1 in a brand new PowerBook G4 - with dvd/cd-rw combo.
>
> I used text mode install and I didn't choose gnome or mySQL, so I was able to use
>CD#2 without any problem. After reboot twice - the first one f
I think that computer has a software modem, so I
wouldn't expect that part to work.
--- Henrique Helder <[EMAIL PROTECTED]> wrote:
> Hi All,
>
> I'm trying install Mandrake 8.2b1 in a brand new
> PowerBook G4 - with dvd/cd-rw combo.
>
> I used text mode install and I didn't choose gnome
> or m
Hi All,
I'm trying install Mandrake 8.2b1 in a brand new PowerBook G4 - with dvd/cd-rw combo.
I used text mode install and I didn't choose gnome or mySQL, so I was able to use CD#2
without any problem. After reboot twice - the first one frooze while checking for new
hardware - I did the Ben Re
10 matches
Mail list logo