As I feared, the net was essentially wiped out by the WPX contest. We
struggled to get ten check-ins. The QRM was overpowering. We gave it the old
college try though.
Here are the stations:
CallNameQTH RIG
W0CZKen N
The K3/0 remote systems was sold almost immediately upon posting.
Thanks for the active interest!
73, Gene, N9SW
New in box, after sitting since 7/2012 in anticipation of remote
setup that never has materialized, K3/0 with both Remote Rig boxes
and cables for either local or distant remote se
This is the one I used for my K3.
http://www.ohr.com/rfl100.htm
-using a smartphone still figuring out how to best reply all. My apologies.
AC2EV - Don
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Clark,
Spreading or compressing the turns on the L1 and L2 toroids is the way
to do it. So, do whatever you need to to accomplish that. Actually, you
do not have to adjust all the turns, just move the end turns closer
together or further apart.
Yes, you should be able to achieve a bit more
New in box, after sitting since 7/2012 in anticipation of remote
setup that never has materialized, K3/0 with both Remote Rig boxes
and cables for either local or distant remote setup. Original cost of
$1295. Only opened for initial inspection, never out of plastic
wrap. $900 including shippin
Greetings all,
Thank you all for the schematics for the KPA500 that was e-mailed to me off
the list.
After much gnashing of the teeth after looking at the schematics, I have
decided to go the "safe route". I will be sending the ailing amp back to
Elecraft. Who would ever thought that you
Good Morning,
The arrival of spring in Oregon has brought back many birds and
given me a few deer sightings. The hummingbirds, at least the first
species, have returned and are busily eating bugs. More flowers are
opening for them also. The weather has been unpredictable but no
weatherma
Hi, all.
I recently uncovered a bad solder on C41 that had been there from my initial
build some years ago. Now I get 4.1w on 40m and 2.7w on 20m--both much
higher than I've ever seen. I'd like to get more power out on 20m even if
it takes away from 40m. L2 is wound pretty tight so there isn'
The S-line and KWM-2/2A cover the WARC bands if you put the right crystals
in. I can't speak for the KWS-1 since I don't have one ;-(
73 Ray W2RS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: ht
I just built that RF load kit from OHR. Works as advertised.
At 150 MHz, the impedance is 50 + j2, which is pretty good for metal
oxide resistors. At HF, I can't measure any reactance but that's
probably due to the SWR meter.
The load is convection cooled (flow-through). Kit instructions are
Net on 20m as usual. I don’t have much of an antenna on 17m.
Phil
> On Mar 29, 2015, at 8:15 AM, Joshua Gould wrote:
>
> Are we still having the net on 20 are are we going to try something new
> today? I am actually home for once and may try to check in with my whole
> 12 watts...
>
>
>
>
I found this link:
http://www.ohr.com/index.htm
Robie - AJ4F
On Sun, Mar 29, 2015 at 4:34 PM, Jim Miller
wrote:
>
> I tried to Google it and made it to the OHR Website but could not find it.
> Somebody please post a URL to a source.
>
> Thanks. 73, Jim KG0KP
>
>
> -Original Message-
I tried to Google it and made it to the OHR Website but could not find it.
Somebody please post a URL to a source.
Thanks. 73, Jim KG0KP
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ernie
Kluft
Sent: Sunday, March 29, 2015 6:55 AM
To: elecr
I have the schematic, Thank you to all who responded to me.I wanted to do some
troubleshooting before calling Elecraft.
Elecraft is taking care of the issue and I'm all set.
__
Elecraft mailing list
Home: http://mailman.qth.net
Are we still having the net on 20 are are we going to try something new
today? I am actually home for once and may try to check in with my whole
12 watts...
72,
Joshua Gould
K8WXA
EM89pn
KX3# 7480
NAQCC # 7704
On Sun, Mar 29, 2015 at 7:45 AM, Charlie T, K3ICH wrote:
> I always wondered abou
Ken,
Actually, since you have the P3 in place too, there are 5 possible
points of failure instead of 3. To what I mentioned before, add the P3
RS-232 'thru' path, and the RS-232 cable between the P3 and the K3.
Eliminate the P3 and the P3 to K3 cable by connecting the RS-232 cable
directly
Ken,
Since the K3 is "doing its thing" normally, try another USB to serial
adapter, or another computer.
There are 3 possible things that could be at fault - the computer, the
USB to serial adapter, or the K3 RS-232 interface.
Do what you can to reduce the possible points of failure down to on
Hi Ross,
Yup, tried that - powered the K3 off, waited 30 secs, powered on and held the
Power button down until the red TX light comes on and MCU LD appears - still no
comms to the iMac.
Ken
> On 29 Mar 2015, at 14:29, Ross Primrose wrote:
>
> Check the owner's manual section on forcing a fi
Check the owner's manual section on forcing a firmware download
73, Ross N4RP
On 3/29/2015 9:22 AM, K M Dailey wrote:
I just tried to update my K3/P3 with the latest firmware and the process has
failed, leaving me with a pretty much dead K3 - MCU, FPF and DSP1 all showing
as nothing insta
I just tried to update my K3/P3 with the latest firmware and the process has
failed, leaving me with a pretty much dead K3 - MCU, FPF and DSP1 all showing
as nothing installed, and the K3 Utility is reporting no comms with the K3.
The K3 itself powers on, but the display is completely blank.
I
For those still pondering what dummy load to use, consider
this... My Cantenna is at least 40 years old and while I should have
put a meter on it, I thought that little unit sold by OHR mentioned
by others would be worth having $51.05 including postage to
Dallas and about an hour of m
I always wondered about that too. 17 is hardly ever what you would call
"crowded".
We're not limited for example, by celebrating radios that don't cover the
WARC bands such as the Collins Collectors Assn. net later on 14.263 at
2000Z. Fun for the nostalgia aspect but pure h3ll when a big con
This feature was requested for the KX3 a year ago, obviously hasn't made the
top of the kx3 software list yet
Dave
G4fre
from: GDR
To: "Elecraft@mailman.qth.net"
Subject: [Elecraft]
Message-ID: <3c3de01b-49e8-4766-a424-b4944b940...@charter.net>
Content-Type: text/plain; charset=us-ascii
I w
23 matches
Mail list logo