OK, good idea.
1. I tune the DX station normally.
2. I tap A>B to copy A frequency to B.
3. I press and hold SPLIT to separate RX and TX.
4. While holding REV I tune about “five up” or wherever the DX is listening.
5. I release REV and I see the DX’s frequency again.
QUESTION: When I transmit
You can operate SPLIT, you just can't listen to two frequencies at the
same time. Just hold the SPLIT key. Then set VFO A to your receive
frequency and VFO B to the transmit frequency. You can temporarily
switch the VFOs by holding the REV key. When you let go, it switches back.
So when you
It is quite simple just long press the A>B button and you will be in
SPLIT mode.
Tell us what you are doing that is not working
Rich
PS - I believe Crossband Split is not possible w/o a SUBRX, but not
within the same band.
On 11/5/2023 21:59 PM, marvwhee...@nwlink.com wrote:
Richard:
It
Can’t Work Split without dual receive?! WRONG! I guess I must be an old
timer now, but I know that there are many others who have done it the same way
as I did …. all that is required to operate SPLIT is the capability to transmit
and receive on separate frequencies … that’s what SPLIT
3806 kHz 9PM ET Sunday (0200Z Monday).
Thanks to the following check ins (w) and relays (rel):
Call State Radio/AmpName
1 N8SBE MIK4D/KPA500 Dave (w),(op)
2 WB9JNZ ILK3/KPA1500 Eric (rel),(w)
3 N9QDS ILIC-7300 Keith (w)
4 WM6P GA
Richard:
It is not necessary to have the 2nd rcvr to work split. I have used my for 3
yrs without a 2nd rcvr and work split frequently.]
Marv
KG7V
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Richard
Sent: Sunday, November 5, 2023 6:12 PM
To: Elecraft
Richard,
The K3 (and K3S) does not have capability to operate SPLIT without the
subRX. The Kx3 and KX2 does have dual Receive, but only over limited
range (12 KHz If I recall correctly)
73,Don W3FPR
On 11/5/2023 9:12 PM, Richard wrote:
I am having trouble understanding both the manual and
I am having trouble understanding both the manual and N6FN’s Mini-manual when
it comes to Split operation. I follow the “directions” over and over but
nothing happens.
Does the fact that my K3S does not have a sub receiver mean that I can’t work
split?
If I’m wrong about that I would really
I just received my KXPD2 Keyer. First impressions are that it is very nice.
I say that only because the KXPD1 that I got for my KX1 was a booger to
adjust. My question is about the extra parts that arrived with the KXPD2,
came with a loose spring and two Allen screws. Additionally the photos I
Please join us on 3806kHz (NOTE NOTE NTE THE NEW FREQUENCY WHICH MOVES
US INTO THE GENERAL CLASS BAND), 9PM ET Sunday (0200Z Monday). Note that
the net stays on the same local time, when we switch back and forth
to/from Daylight time, so the UTC time changes, but not the local time.
Now that
10 matches
Mail list logo