OK you guys, I have gone out to the garage and put on my "hip waders"
now you guys can continue, as now I won't get any on me !
Well, unless it gets so deep, it goes over the top of the waders !!!
73... Ken.K7ZUM
> I had the same problem, until I discovered that under
Hi All,
Just a short note, my DX-ped partner (AH8DX-8R1EA) and I
are preparing to leave this sunday evening,Feb.26th., for Guyana 8R1
land on another "suitcase" DX-ped, plan on being in Georgetown on
Tuesday Feb. 28th, and hopefully set up soon afterwards. I have applied
for the call
Hi All,
Anybody on the list have and experience with using a K2/100
with a Microham keyer on RTTY ?? using Writelog with MMTTY
If so, I would be intrested in your settings you use to key up the K2,
have had no success so far getting it to work on RTTY
73 de K7ZUM
Ken in Gres"HAM" Ore
Ten-Tec has a very nice model 310 cooling fan for the Orion,Omni,Corsair
series radios, that fits very nicely on the top of the K2/100, hangs a
little
bit off the rear, and if you use the tilt bail on the K2, you can use a
rubber
band to temp hold it on, have used it this way many times, works wel
HI All,
Have been playing around in the SARTG RTTY test this weekend,
and have noticed a power problem with my K2\KPA100.
If I am on 20 or 15 mtrs, in the RTTY mode, I have little if any pwr output
control, even though the display shows 0 to 110 watts, my watt meter will
only show abo
Hi All,
Am working on putting my secound K2 together, have run into a bit of
a problem,
am on the "first light" alignment and test, part 1, K2 powers up, info 201
comes on
(and disapears) then the elecraft and 7100.cc c, everything seems fine to that
point,
but, not a single button
Hi All,
here it is, contest season, and would like to use the K2 in the C.W. tests,
hooked up the computer and logging programs to the K2, work just fine, cept
I pick up the computer polling the radio, is abt S-9 on ten, S-6 on 15, and
gets
less as I go down the bands, anybody else have su
Nope, just Gres"HAM" O-re-GONE !!
73 de K7ZUM
Ken in Gres"HAM" Ore
> Is that what makes working Multnomah County so special? :)
> 73,
>Kevin. KD5ONS
>
>
>
> On Thu, 30 Sep 2004 23:15:10 -0700, Ken K7ZUM <[EMAIL PROTECTED]>
&
Thanks to all who answered my initial question about missing a few dits,
and now I know that it is "normal" with an easy work around,
now I'll use a single "dah" (instead of "dits") seems to bring the power
up
almost immediate.
and btw, Ron, you would not belive what kind of weird neo-geo-grav
Hi All,
After a few months delay of ignoring my K2, I finally got back to putting
the audio board, keying mod and new firmware in, and have noticed what I
think is a new problem for me, (not sure if it wasn't there before)
When in CW mode, (have the 100 watt pa board) and I first
10 matches
Mail list logo
