Hi Don,
Thank you for replying directly to my post. I have no doubt that the
precautions you've mentioned aren't without merit.
All I was trying to convey was that there is good chance the OPs Macintosh is
well grounded as are most commercially assembled computers.
I can recall several occas
Forgive me if I misunderstood Don's response, but normally a computer
regardless of make or model is grounded via the power supply negating any need
for additional measures.
The above statement is only applicable if the home ground has been properly
facilitated. Of course, all bets are off i
All the best to you and yours in 2011 from me and your friends at 4U1UN.
73 de James K2QI
Sent via BlackBerry from T-Mobile
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq
Do you have the K3 set to DATA-A mode?
James K2QI
--Original Message--
From: gold...@charter.net
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Reflector
Subject: [Elecraft] K3 & DM 780
Sent: Dec 31, 2010 16:27
I want to use DM 780 with my K3 to work either CW or one of the data
m
Mike, that is the replacement heating element.
James K2QI
--Original Message--
From: Mike
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Reflector
ReplyTo: n...@nf4l.com
Subject: [Elecraft] Soldering station
Sent: Dec 26, 2010 07:38
I got an AOYUE 937+ soldering station for Christm
Are you sure the TX audio isn't coming out of your PC speakers?
James K2QI
Sent via BlackBerry from T-Mobile
-Original Message-
From: Paul Milward
Sender: elecraft-boun...@mailman.qth.net
Date: Wed, 22 Dec 2010 08:50:38
To: elecraft reflector
Subject: Re: [Elecraft] muting audio on PSK
Toxins are a good point raised, and I on more than one occasion have felt the
effects of lead poisoning as you've described. I do not have ventilator hood
either, but now try to work with the window open and have small desktop fan
which attempts to blow most of the fumes and smoke out of that wi
NB works well... It's the NR that could use improvement.
Tnx,
Jim K2QI
Sent via BlackBerry from T-Mobile
-Original Message-
From: The Smiths
Sender: elecraft-boun...@mailman.qth.net
Date: Mon, 29 Nov 2010 05:26:29
To: ; Elecraft Reflector
Subject: Re: [Elecraft] K3 Noise Reduction Perf
Thank you Rich,
My daughter had a severe case of bronchiolitis. I'm happy to say that she's on
the mend back at home.
Also, I'm grateful for your reply to my questions. You have confirmed my
assumptions.
73 and Happy Holidays,
James K2QI
Sent via BlackBerry from T-Mobile
-Original Message
Eric,
What are you doing away from the Zed? This isn't your usual stomping ground. :)
Anyway, your posts are showing up, otherwise I wouldn't be responding.
73,
James K2QI
Sent via BlackBerry from T-Mobile
-Original Message-
From: eric
Date: Sat, 20 Nov 2010 08:41:44
To: ;
Cc:
Subje
Hi Don,
Without deviating too far from the current discourse at hand, the reason I was
interested in any USB developments related more to DXpeditions and the amount
of gear required to facilitate PC connections. To me, reducing the amount of
items needed that could potentially be forgotten, lo
I believe HRO has an outlet in Vermont. Not sure of its proximity to you, but
it's worth a look.
James K2QI
--Original Message--
From: vtuff59...@aol.com
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Reflector
Subject: [Elecraft] OT: Ham Radio Stores in Vermont
Sent: Nov 20, 2010
Wow. It's a good thing I didn't throw in the subject of knobs too, or otherwise
I might have found my apartment surrounded by angry guys carrying pitch forks
and torches, hi hi.
Thanks for your gracious input. :)
Vy 73,
James K2QI
Sent via BlackBerry from T-Mobile
-Original Message-
Fr
Hi Mark,
That connector (looks like an RJ11) is an accessory connector that isn't used
for anything at the moment. Perhaps the guys at Aptos use it for diagnostics?
James K2QI
That connector
--Original Message--
From: Mark Goecke
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Re
Pse send an email to Elecraft support. They have a utility that when run once,
will remove out-of-band TX lockouts. You will probably need to install the
KBPF3 as well if you don't have one already.
73 de James
K2QI
--Original Message--
From: n...@widomaker.com
Sender: elecraft-boun...@
That makes absolutely no sense to me. Can you or anyone else here well versed
in radio design please explain to me why the Kenwood engineers would do this?
Tnx,
James K2QI
--Original Message--
From: Larry Phipps
To: James Sarte
Cc: Elecraft Reflector
Subject: Re: [Elecraft] OT: QST's re
Tommy,
Not a direct answer to your question, but if you download K3EZ, it becomes very
easy to tweak both RX and TX EQ settings. You can then test in real time using
the monitor or DVR. I think it's better doing it this way as you can tailor
settings to your voice rather than basing it off som
I now understand fully what's trying to be achieved. Sorry for the initial
misunderstanding. What you've described is something I too have desired, and
would like to see it as an option one day.
73,
James K2QI
--Original Message--
From: Barry N1EU
Sender: elecraft-boun...@mailman.qth.ne
Barry,
I may have misread the original question, but if all one wants to do is listen
to the subrx in both channels, then it is possible by adjusting the mix
settings, then turning the AF gain down on the main. That's what I do if I
want a "stereo" type output from my sub receiver. This is hel
You can listen to the subrx in both ears. There is an audio mixing function
that allows you to pipe sub output to both channels.
James K2QI
--Original Message--
From: David Lankshear
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Reflector
Subject: Re: [Elecraft] [K3] Enhancement r
Hi Don,
I'm no expert on RFI so what I'm about to say, you've probably thought about
already.
But, have you considered shielding the induction motor? Or if that isn't
possible, using something to null out the noise?
James K2QI
Sent via BlackBerry from T-Mobile
-Original Message-
From:
If you're posting to this reflector, then I think you already are hi! :)
James K2QI
--Original Message--
From: Brian McInerney
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Reflector
Subject: [Elecraft] Be a member
Sent: Nov 9, 2010 12:53
I would like to become a member
thanks
--
Well, rolling back is worth a shot. I've never had problems reverting to
previous versions. Plus, look at it this way - what variables have changed? If
this issue manifested itself after the last fw update, then that should be a
good place to start.
James K2QI
Sent via BlackBerry from T-Mobile
Perhaps this process should be appended to the K3 FAQ or troubleshooting areas,
as this topic comes up quite a bit on the reflector.
Cheers,
James K2QI
Sent via BlackBerry from T-Mobile
-Original Message-
From: Dick Dievendorff
Sender: elecraft-boun...@mailman.qth.net
Date: Thu, 4 Nov 2
Turn off rig and close the K3 utility. Then try it again.
James K2QI
--Original Message--
From: Jim Bobo
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Reflector
Subject: [Elecraft] Firmware load
Sent: Nov 4, 2010 13:54
Power failure in middle of firmware load and now cannot connec
Nate, have you tried reloading the firmware? I'd give that a shot first. If
that doesn't help, revert to the previous version and test again.
In my case, latest beta firmware installed with no issues to report.
73 de James K2QI
--Original Message--
From: Nate Bargmann
Sender: elecraft-b
I find that when my PC's line out is set to 50 percent, and line in on K3 is
set to about 8 or 9, I get 4-5 bars ALC.
James K2QI
--Original Message--
From: Mike K2MK
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Reflector
Subject: [Elecraft] K3 LINE IN Level Adjustment
Sent: Nov 1
Monoprice is your friend.
James K2QI
Sent via BlackBerry from T-Mobile
-Original Message-
From: The Smiths
Sender: elecraft-boun...@mailman.qth.net
Date: Thu, 28 Oct 2010 23:15:28
To: ; Elecraft Reflector
Subject: Re: [Elecraft] Nearfield monitors
After reading what you wrote about t
I haven't encountered any issues with that version of the K3 utility.
James K2QI
--Original Message--
From: Gary
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Reflector
Subject: [Elecraft] K3 Utility question
Sent: Oct 28, 2010 21:41
Elecrafters,
are there any known issues with r
Hi Eric,
Is there a chance I could swap out boards again? I'm not a huge fan of the
encoders I received as replacement.
73 de James K2QI
--Original Message--
From: Eric Swartz - WA6HHQ, Elecraft
To: Guy Olinger K2AV
Cc: James Sarte
Cc: Elecraft Reflector
Subject: Re: [Elecraft] K3 encod
Why the sarcasm? You asked, people answered.
James K2QI
Sent via BlackBerry from T-Mobile
-Original Message-
From: Brian Alsop
Sender: elecraft-boun...@mailman.qth.net
Date: Sun, 17 Oct 2010 14:25:11
To:
Subject: Re: [Elecraft] K3 test mode
Congratulations on your fine motor skills.
Hi Dale,
If that BHI board is the same as the Gap ANEM units, then you will find that
for even an outboard AF solution, it works surprisingly well. So far, that has
been my point of reference when comparing NR performance. With that said
though, I have to disclose the fact that the BHI or ANE
This too has been my experience, although Lyle has done a good job with the
recent updates. However, performance and volume levels in general are still sub
par in my opinion. Compare the K3 with even an AF dsp solution like the Gap
ANEM, and you'll see that a lot of work still remains to be done
For what it's worth, I usually run af gain up to about 12 o'clock when using
the built in speaker. Sometimes more or less depending on signal strength.
James K2QI
Sent via BlackBerry from T-Mobile
-Original Message-
From: The Smiths
Sender: elecraft-boun...@mailman.qth.net
Date: Tue, 7
Just out of curiosity, I'm wondering if Elecraft has gone back to the original
"ratchety" encoders used for filter width, etc. I used to have the original
encoders until one of them failed. My front panel board replacement came with
the tighter feeling, non-ratchety encoders which I don't reall
Who uses the Elecraft hand mic? I do and mic gain has to be set low; i.e.
around 8 or 9 to prevent clipping and flat topping as viewed on a monitor
scope. This is with mic sensitivity set to low in the menu. I was once told
that the hand mics are a tad hot, but mine seems to be excessively so
I've pretty much cut all of the lower frequencies out on my TX EQ and have
gotten very good audio reports. K3 can sound good on SSB but has to be tweaked.
James K2QI
Sent via BlackBerry from T-Mobile
-Original Message-
From: DOUGLAS ZWIEBEL
Sender: elecraft-boun...@mailman.qth.net
Date:
Don't know about anyone else, but I'm perfectly satisfied with the performance
of my 25A MFJ switching PS. It's small, light, cheap, and noise (electrical)
free. The only caveat is its loud cooling fan.
James K2QI
Sent via BlackBerry from T-Mobile
-Original Message-
From: Joe Planisky
Does it have to be portable, or can you use a fixed-station amp? If the latter,
you can always pick up a used Heathkit SB-220 for a good price.
73 de James K2QI
--Original Message--
From: dw
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Reflector
Subject: [Elecraft] Your opinion
Hi Bill,
If the board is properly seated and there's still a gap, you can use some large
washers to fill the void.
Congrats on the K3 and hope to hear you on the air soon.
73 de James K2QI
--Original Message--
From: Bill Conkling
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Ref
40 matches
Mail list logo