The differences between K3 and K3S firmware features are very minor, all having
to do with hardware addressing. For example, the K3S has a second attenuator
section. Other than this, there is no difference in functionality.
The reason there are two different .hex files in the load package is
Knut,
The functions of the K3 and K3S are the same, and will likely remain the
same. The differences are in the hardware, so a 2nd MCU file has been
in place for some time to allow for a change in the microcontroller used
in later K3s and the K3S.
I can envision this being expanded, not to
Hi Don,
Hold on a second. Up to this point the firmware for the K3 and the K3S has
been exactly the same. The firmware figures out at run time which features
are available whether it being in the K3 or the K3S and behaves
accordingly. Is there something changed here? That would really complicate
Ted,
There already is a difference. K3 Utility figures out which you have
and loads the matching firmware when there is a difference. It should
be seamless whether you have a K3 or K3S.
73,
Don W3FPR
On 2/23/2017 9:51 AM, Ted Edwards W3TB wrote:
As I read of updates -- and one
As I read of updates -- and one specifically saying K3S -- is there going
to be a difference coming between what applies to K3S and the K3 itself?
Thanks!
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow what others
5 matches
Mail list logo