Bob Serwy wrote:
Yes there is. I use it.
'k31;swt13;swt13;k30;
OK. I mis-remembered the problem I had trying to get this to work.
I'm sending SWT13;SWT13;UPB4;UPB4;SWH13;
The two VFOs *are* being set to the same frequency and mode, and SPLIT is
being engaged, but VFO B is not
.
Bob Serwy - N9RS
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of G4ILO
Sent: Saturday, July 05, 2008 3:45 AM
To: elecraft@mailman.qth.net
Subject: RE: [Elecraft] Split ops?
Bob Serwy wrote:
Yes there is. I use it.
'k31;swt13;swt13;k30;
OK. I
Subject: RE: [Elecraft] Split ops?
Bob Serwy wrote:
Yes there is. I use it.
'k31;swt13;swt13;k30;
OK. I mis-remembered the problem I had trying to get this to work.
I'm sending SWT13;SWT13;UPB4;UPB4;SWH13;
The two VFOs *are* being set to the same frequency and mode, and SPLIT
Hi Tom,
You need to tap A=B twice to transfer all the parameters, freq, mode, etc.
73, Bud N7CW
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of TMorton
Sent: Friday, July 04, 2008 8:56 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Split ops?
A second button press is now required to transfer the mode setting.
According to the release notes for version MCU 1.87 / DSP 1.69:
* A-B SWITCH: 1st tap copies frequency only; 2nd tap within 2
seconds copies mode
and filter settings.
Bob NW8L
On Fri, Jul 4, 2008 at 9:56 AM, TMorton [EMAIL
Tom,
Several folks wanted it that way (for several reasons), so there was a
recent change.
One tap of the AB button changes only the frequency. Two taps will
change the mode and other settings too.
Look at the firmware release notes for further explanation.
73,
Don W3FPR
TMorton wrote:
Tap AB a second time right after the first tap. Then you will see AB ALL.
73
Greg
AB7R
- Original Message -
From: TMorton [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Friday, July 04, 2008 8:56 AM
Subject: [Elecraft] Split ops?
When making the selection AB then holding
Don Wilhelm wrote:
Several folks wanted it that way (for several reasons), so there was a
recent change.
One tap of the AB button changes only the frequency. Two taps will
change the mode and other settings too.
Look at the firmware release notes for further explanation.
Yes there is. I use it.
'k31;swt13;swt13;k30;
Bob Serwy - N9RS
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of G4ILO
Sent: Friday, July 04, 2008 4:57 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Split ops?
Don Wilhelm wrote:
Several
9 matches
Mail list logo