IMHO that is caused, because of the read ahead of the interpreter, The
feed you get is not the actual one, it is the one the interpreter last got.
Norbert
Am 08.02.2014 21:30, schrieb Mark Tucker:
> Can anyone confirm for me that there is something wrong with the
> feedrate derived from:-
> emc.
Can anyone confirm for me that there is something wrong with the
feedrate derived from:-
emc.stat.settings[1]
I thought this displayed the commanded feedrate but if you run a program
with varying feedrates in it,the display shows the highest feedrate in
the program and not the current commanded
2 October 2009 7:32 PM
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Feedrate
>
> Hi,
>
> Is there any way of multiplying or dividing feedrate? On the
> little gantry system I have just set up the rotary axis is
> driven by a microstepping stepper driv
Hi,
Is there any way of multiplying or dividing feedrate? On the
little gantry system I have just set up the rotary axis is
driven by a microstepping stepper driving a worm and wheel
and so, at the moment, G0 corresponds to a feedrate of
around 120,000! I want to maintain the input accuracy of
Thanks Brian,
That's an idea for scripted moves.. I was really hoping that there would
be a more 'permanent' solution, as a lot of the things I do are one-offs
where I really only use MDI moves to take advantage of the precision
moves possible. I gness its just laziness on my part not wanting t
On Friday 29 February 2008 07:42, Ian W. Wright wrote:
> Hi Jim,
> The axis is set as ANGULAR, so the feedrate is in degrees/minute I
> assume. The INPUT_SCALE is set to rotate the spindle by degrees and I
> have confirmed that this is what it does by measurement. I need it to
> work in degrees
[EMAIL PROTECTED] wrote:
> Ian,
>
> What is the "feed rate" units for the spindle? RPM or Rev Per Sec?
Degrees per minute is the default, radians/min is an alternate.
Jon
-
This SF.net email is sponsored by: Microsoft
Defy
Hi Jim,
The axis is set as ANGULAR, so the feedrate is in degrees/minute I
assume. The INPUT_SCALE is set to rotate the spindle by degrees and I
have confirmed that this is what it does by measurement. I need it to
work in degrees for such things as gear cutting or milling squares on
shafts et
emc-users-bounces cc
@lists.sourceforg
e.net Subject
Hi,
I am setting up a fifth stepper axis (B) to drive a lathe head on my
little miller and have run into a minor problem. The new ini file is at
http://tinyurl.com/yoahtm
The axis is working OK and I am getting a reasonable turn of speed out
of it for what I want to do but the feedrate I need to
10 matches
Mail list logo
