Tim,
...OK, two resets later, it passes no audio at least one out of every four
times I start PSDR - this after doing the oft recommended
DC-off-for-several-minutes routine. That's why I'm wondering if the newer
firmware, which is the only difference at this point, can be rolled back.
Thanks,
WX4
There is no "roll back" process. You just run 2.0.22. Versions are installed
independently.
Do a return to Factory Defaults (DB reset) and see if that resolves the audio
issues.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz
David,
I tried that - in vain. Decided to revert to 2.0.22, and now... well we're
acting up...
On Mon, Jun 6, 2011 at 8:40 PM, David McKenzie wrote:
> Check the SetPoint settings. Chances are you assigned it to the 2.0.22
> PowerSDR.exe; you'll have to change the associated "program" to the new
Is there a way to roll back the firmware (2.1RC3 to 2.0.22) as I have
uninstalled RC3 and, upon returning to 2.0.22, half the time PSDR powers up
I have no receive audio.
F5KA
Win7 64
showing FW 2.0.15.6
Thanks,
WX4L
--
russ
___
FlexRadio Systems Maili
Check the SetPoint settings. Chances are you assigned it to the 2.0.22
PowerSDR.exe; you'll have to change the associated "program" to the new
PowerSDR executable.
On Mon, Jun 6, 2011 at 5:11 PM, russ wrote:
> I have a Logitech MX Revolution mouse, which has buttons reconfigured
> (using
> SetPo
Thanks to you all for setting my mind at ease.
Rick
W2JAZ
On Monday, June 6, 2011, Laurie wrote:
> Just checked it again. It sends signals whether the amp is on or off, I can
> see it in the key line LED every time I turn the Flex off.
> I don't remember this prior to V 2 and to be honest I had f
I have a Logitech MX Revolution mouse, which has buttons reconfigured (using
SetPoint) for different tune steps. Upon installing the newest RC, the
custom settings do not function. If I go back and run v2.0.22 everything
works FB. Has anyone else seen this?
PSDR 2.1RC3
Win7 64
F5K
Thanks,
WX4L
Thanks to the many who emailed off list. I much appreciate it and the
questions likely have just started. Do have a computer now and a 1500
on the way, so I should be up and running (I hope) in about a week.
Again, much thanks to all. Good group here.
Now if I could only get the hole in the rocks
HI all
With the new guidance from Flex on configuring VSPManager for the new
FlexControl, I will need to modify the configuration of the systems I have
sold. It is probably better that all customers contact me off-list to
arrange a time I can connect to reconfigure your system in order to be
comp
Gary,
You didn't mention remote operation in your original post. Of course, that
changes the need for the checkbox.
73, Ray, K9DUR
http://k9dur.info
-Original Message-
From: Gary Blau [mailto:gb...@w3am.com]
Sent: Sunday, June 05, 2011 10:28 PM
To: Ray, K9DUR
Cc: 'Brian Lloyd'; flexrad
Hi Folks,
I have attempted to install RC3 on my Althon II, 3Ghz with Win64 but get
the PowerSDR stopped working windows is looking for a solution.
I deleted all references and the master.xl file from
/user/username/appdata/flexradio V.XXX and restart the process but
PowerSDR falls over at sa
On 6/06/2011 8:59 PM, David Walker wrote:
Hi Folks,
I have attempted to install RC3 on my Althon II, 3Ghz with Win64 but
get the PowerSDR stopped working windows is looking for a solution.
I deleted all references and the master.xl file from
/user/username/appdata/flexradio V.XXX and restart
Hi Folks,
I have attempted to install RC3 on my Althon II, 3Ghz with Win64 but get
the PowerSDR stopped working windows is looking for a solution.
I deleted all references and the master.xl file from
/user/username/appdata/flexradio V.XXX and restart the process but
PowerSDR falls over at sa
Hi all,
Am I the last person to discover the RC3? Did I miss the announcement?
This will give me something to do after the kids go to bed.
73
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listin
Just checked it again. It sends signals whether the amp is on or off, I can
see it in the key line LED every time I turn the Flex off.
I don't remember this prior to V 2 and to be honest I had forgotten about it
because I make sure the amp is always off prior to shutdown for this reason.
Laurie
15 matches
Mail list logo