Dag-Erling Smørgrav a écrit :
Saifi Khan writes:
The response seems to suggest [...]
...nothing except that whoever wrote it has absolutely no idea what
they're talking about.
DES
I know that the question was about "native" FreeBSD port but did someone
tried / used Oracle on to
CARP does the job perfectly!
Is you have to LB/RP from a front end (the SPOF?) you can also take a
quick look on LighttpD with the Proxy module (very simple & efficient)
In a heavier (but also quite simple) environment :
* Two (or more) LB/RP on the front with lighttpdproxy - HA with CARP
* Two
Yup!... In France too :[
On 9/14/2007, "Harry Maugans" <[EMAIL PROTECTED]> wrote:
>I've confirmed (through a friend) in England it's not accessible either.
>
>I'm surprised they wouldn't have redundancies to prevent this from
>happening. Round robin DNS with collocation at least.
>
>I ran an nm
Amer H. Alhabsi a écrit :
Philippe Laquet wrote:
Hi Amer,
Could you send an "ifconfig -a" ?
It may occur if your MTU doesn't match
Amer H. Alhabsi a écrit :
Hi,
The network card that came with the PC (Broadcom NetXtreme Gigabit
Ethernet) was not recognized by sysinstall
Hi Amer,
Could you send an "ifconfig -a" ?
It may occur if your MTU doesn't match
Amer H. Alhabsi a écrit :
Hi,
The network card that came with the PC (Broadcom NetXtreme Gigabit
Ethernet) was not recognized by sysinstall. So I bought a real tek
based card that works fine. But when I run dm
Michel Talon a écrit :
Philippe Laquet wrote:
OK - Thanks Tom, I will take a look on it, I think that HAVP was first
developped on and for GNU/Linux, that may explain the need of a
Mandatory (derived from SysV?) locks... I am currently looking on the
source code of HAVP and check is a
Tom Judge a écrit :
Philippe Laquet wrote:
Dear All,
I a trying to get HAVP (it works almost well, great software!) but I
also need to use the streaming option and it needs a FS mounted with
mandatory locks. I did not found any option with UFS(2) and also
tried with ext2fs loaded but the
Kris Kennaway a écrit :
On Sat, May 12, 2007 at 01:10:09AM +0200, Philippe Laquet wrote:
Dear All,
I a trying to get HAVP (it works almost well, great software!) but I
also need to use the streaming option and it needs a FS mounted with
mandatory locks. I did not found any option with
Dear All,
I a trying to get HAVP (it works almost well, great software!) but I
also need to use the streaming option and it needs a FS mounted with
mandatory locks. I did not found any option with UFS(2) and also tried
with ext2fs loaded but the mount_ext2fs does not support "-o mand" ...
An
Hi,
If you only need to set duplex modes and so on, the "ifconfig" command
under *BSD replaces all the *-tools that you talking about ;)
(the manpage gives all the information you may need)
Kind Regards
Philippe Laquet
essential li a écrit :
> I saw there are mii.h and mii
Can you give us the "VirtualHost" directives included in your
configuration file, listening ports and the tailed couple "access-log" /
"error-log" ?
;)
drewshen a écrit :
I am having a problem with my apache in freebsd. i set up two virtual hosts,
one is a default, the other goes to anothe
How your m0n0wall is connected to the Internet?
If it is behind a router that do NAT there shouldn't be any problem. If
the m0n0wall is connected directly behind a modem this will be more
problematic :P
But as I understood your setup seems like :
Router < 192.168.0.0/24 > m0n0wall < 192.168.
DHCP "specific" server to do only that task.
Do the rebuild of the ISO image itself with the "install.cfg" on the CD
is also an alternate option but we will have to rebuild the ISO, re-burn
images every time we change an option - Use a new release and so on...
Thanks in
Hi!
I would like to know if someone has published some patch or found a
solution to perform a automatic installation via sysinstall but with a
remote (ftp/http/nfs) install.cfg file? I found some solutions using a
PXE boot disk and mount via NFS but don't want to put NFS shares and
DHCP "spe
14 matches
Mail list logo