Hello peoples,
I am not sure which of these changes fixed the problem with
FreeBSD not seeing the drive because I did them all at one time. But
anyways, FreeBSD sees it and I am happy.
Thanks to all who gave their input!
Michael E Mercer
Set all jumper setting were on the Western Digital SCSI D
On Thu, 4 Dec 2003, HOLLOW, CHRISTOPHER wrote:
> I've worked with ProLiant servers and with FreeBSD RAID, but not on the
> same box. Basically, as I understand it, you should use the Compaq
> SmartStart Array Configuration Utility to create the RAID1 (mirror)
> array. The array controller will
I've worked with ProLiant servers and with FreeBSD RAID, but not on the
same box. Basically, as I understand it, you should use the Compaq
SmartStart Array Configuration Utility to create the RAID1 (mirror)
array. The array controller will then present the RAID set as one
logical drive to th
> From: Michael E. Mercer
> The drive that can not be found is a
> Western Digital WD Enterprise 4360
> 4.3 GB Wide-Ultra SCSI
> I have removed the second SCSI controller card (PCI) and
> the Seagate SCSI Hard Drive.
It's been a while--but if you're saying you removed the drive that fbsd
sees a
The drive that can not be found is a
Western Digital WD Enterprise 4360
4.3 GB Wide-Ultra SCSI
I have removed the second SCSI controller card (PCI) and
the Seagate SCSI Hard Drive.
All that remains is the On-motherboard scsi controller and the
western digital SCSI drive.
The Compaq Configurati
> From: Michael E. Mercer
> Ok, its the "System Configuration Utility" supplied by Compaq not the
> BIOS.
> Michael
Just to jump in...after reading the thread you probably have hardware
raid 0 (mirroring) on the system using 2 controllers and 2 drives--the
Compaq cu should tell you what's going
On Thu, 4 Dec 2003 10:49:05 +0900
horio shoichi <[EMAIL PROTECTED]> wrote:
> On Wed, 03 Dec 2003 00:12:06 -0500
> "Michael E. Mercer" <[EMAIL PROTECTED]> wrote:
> > Ok. I have what looks to be two host adapters.
> > The one on the motherboard and a PCI? card.
> >
> > Not sure what exactly I am sup
On Wed, 03 Dec 2003 00:12:06 -0500
"Michael E. Mercer" <[EMAIL PROTECTED]> wrote:
> Ok. I have what looks to be two host adapters.
> The one on the motherboard and a PCI? card.
>
> Not sure what exactly I am supposed to do for I have never
> had a PC with SCSI before...
>
> Any help is appreciate
AIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Michael E.
> Mercer
> Sent: Wednesday, December 03, 2003 9:14 AM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: RE: SCSI Disk not found
>
> Hello,
>
> I wish it were that easy... I really meant that FreeB
on this PC, was it running ms/windows and
did you see the both SCSI drives?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Michael E.
Mercer
Sent: Wednesday, December 03, 2003 9:14 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: SCSI Disk not
nt
> to use it.
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Michael E.
> Mercer
> Sent: Tuesday, December 02, 2003 11:38 PM
> To: [EMAIL PROTECTED]
> Subject: SCSI Disk not found
>
> Hello peoples,
>
> I was given a Compaq
ehalf Of Michael E.
Mercer
Sent: Tuesday, December 02, 2003 11:38 PM
To: [EMAIL PROTECTED]
Subject: SCSI Disk not found
Hello peoples,
I was given a Compaq Proliant 800 machine...its a pentium pro
200 MHz. I got 4.9-Stable installed and everything is running
smooth.
However, I noticed that is
> Ok. I have what looks to be two host adapters.
> The one on the motherboard and a PCI? card.
>
> Not sure what exactly I am supposed to do for I have never
> had a PC with SCSI before...
http://www.faqs.org/faqs/scsi-faq/
This is probably a good place to start.
Ok. I have what looks to be two host adapters.
The one on the motherboard and a PCI? card.
Not sure what exactly I am supposed to do for I have never
had a PC with SCSI before...
Any help is appreciated.
Thanks
MeM
On Tue, 2003-12-02 at 23:57, Mike Maltese wrote:
> > I was given a Compaq Prolia
> I was given a Compaq Proliant 800 machine...its a pentium pro
> 200 MHz. I got 4.9-Stable installed and everything is running
> smooth.
>
> However, I noticed that is does indeed have two scsi disks,
> but freebsd only finds one.
>
> Attached is the dmesg... notice the sym0 and sym1.
> Does this
Hello peoples,
I was given a Compaq Proliant 800 machine...its a pentium pro
200 MHz. I got 4.9-Stable installed and everything is running
smooth.
However, I noticed that is does indeed have two scsi disks,
but freebsd only finds one.
Attached is the dmesg... notice the sym0 and sym1.
Does th
16 matches
Mail list logo