and then switch mode.
Thanks again
Regards
Manish Jain
From: odhia...@gmail.com
Date: Sun, 30 Jun 2013 11:45:11 +0300
Subject: Re: Problems getting my Huawei 0x140b USB modem to speak to internet
To: bourne.ident...@hotmail.com
Hi Manish,
I seem to have missed the name - Huawei, sorry
+0300
Subject: Re: Problems getting my Huawei 0x140b USB modem to speak to
internet
To: bourne.ident...@hotmail.com
Hi Manish,
I seem to have missed the name - Huawei, sorry for that.
Anyway, this should be easy to resolve - I suppose.
With the virtual cd-rom (da0) presenting itself, FreeBSD
by fortune (Polytropon)
3. ALT key problem with Virtual Box? (Scott Ballantyne)
4. Re: ALT key problem with Virtual Box? (Polytropon)
5. Problems getting my Huawei 0x140b USB modem to speak to
internet (Manish Jain)
6. Re: ALT key problem with Virtual Box? (Scott Ballantyne)
7
. Problems getting my Huawei 0x140b USB modem to speak to
internet (Manish Jain)
6. Re: ALT key problem with Virtual Box? (Scott Ballantyne)
7. Baker Invites freebsd-questions@freebsd.org to spend holiday
in Goa (John Baker)
8. (Upali Kulasekara)
9. Re: your mail
by fortune (Polytropon)
3. ALT key problem with Virtual Box? (Scott Ballantyne)
4. Re: ALT key problem with Virtual Box? (Polytropon)
5. Problems getting my Huawei 0x140b USB modem to speak to
internet (Manish Jain)
6. Re: ALT key
)
3. ALT key problem with Virtual Box? (Scott Ballantyne)
4. Re: ALT key problem with Virtual Box? (Polytropon)
5. Problems getting my Huawei 0x140b USB modem to speak to
internet (Manish Jain)
6. Re: ALT key problem with Virtual Box
Ballantyne)
4. Re: ALT key problem with Virtual Box? (Polytropon)
5. Problems getting my Huawei 0x140b USB modem to
speak to
internet (Manish Jain)
6. Re: ALT key problem with Virtual Box? (Scott
: ALT key problem with Virtual Box?
(Polytropon)
5. Problems getting my Huawei 0x140b USB modem to
speak to
internet (Manish Jain)
6. Re: ALT key problem with Virtual Box? (Scott
Ballantyne
USB modem to
speak to
internet (Manish Jain)
6. Re: ALT key problem with Virtual Box? (Scott
Ballantyne)
7. Baker Invites freebsd-questions@freebsd.org
mailto:freebsd-questions@freebsd.org
Hello All,
I have a a Huawei USB modem (product id 0x140b) which is connected to my
PC. I downloaded and installed Draisberghof's usb_modeswitch.
The following are the contents of my /etc/usb_modeswitch.conf :
DisableSwitching=0
EnableLogging=1
DefaultVendor=0x12d1
DefaultProduct=0x140b
Well, after trying so many things with no luck, i will give a try on ubuntu.
I must say all the support that give to me Odhiambo was excellent. Thanks
to all of you, thanks Odhiambo for all your effort.
Lets see what happen.
Saludos / Regards
Leonardo Santagostini
Hello all.
I have a latitude e6400 with FreeBSD Release 9.1. And i can't get the USB
modem working.
I tried with umodem, u3g but no luck :(
-- Dmesg
root@:/root # dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
On 27 March 2013 16:29, Leonardo Santagostini lsantagost...@gmail.comwrote:
Hello all.
I have a latitude e6400 with FreeBSD Release 9.1. And i can't get the USB
modem working.
I tried with umodem, u3g but no luck :(
[snip]
ugen7.2: HUAWEI at usbus7
ugen7.2: HUAWEI at usbus7
lsantagost...@gmail.comwrote:
Hello all.
I have a latitude e6400 with FreeBSD Release 9.1. And i can't get the USB
modem working.
I tried with umodem, u3g but no luck :(
[snip]
ugen7.2: HUAWEI at usbus7
ugen7.2: HUAWEI at usbus7 (disconnected)
ugen7.2: HUAWEI at usbus7
umodem0: HUAWEI HUAWEI
.
I have a latitude e6400 with FreeBSD Release 9.1. And i can't get the USB
modem working.
I tried with umodem, u3g but no luck :(
[snip]
ugen7.2: HUAWEI at usbus7
ugen7.2: HUAWEI at usbus7 (disconnected)
ugen7.2: HUAWEI at usbus7
umodem0: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02
El día Wednesday, March 27, 2013 a las 05:09:22PM -0300, Leonardo Santagostini
escribió:
Hello Odhiambo .
The 3G model is Huawei E173 with Movistar Argentina.
Ive tried but i cant see in windows de USB port to have a serial link :(
Saludos / Regards
Leonardo Santagostini
Hi,
Pls
Hello Matthias,
thanks for your response, Odhiambo was helping me with this modem with no
luck. Tomorrow we will continuing trying to get this modem running.
Thanks all, and thanks Odhiambo for all the support he is giving to get
this piece working :)
I really apreciate it !!!
Saludos /
Hi,
Thanks for your inputs. I have finally got FreeBSD to speak to the
internet. Now I have one more problem before I can live in peace. I am
fond of a game hosted via the Discovery channel's website :
http://news.discovery.com/human/games-lumosity-word-bubbles.html
The game needs Adobe
On Sun, 29 Jul 2012 23:35:06 +0530
Manish Jain articulated:
Thanks for your inputs. I have finally got FreeBSD to speak to the
internet. Now I have one more problem before I can live in peace. I
am fond of a game hosted via the Discovery channel's website :
On 07/29/2012 21:31, Jerry wrote:
On Sun, 29 Jul 2012 23:35:06 +0530
Manish Jain articulated:
Thanks for your inputs. I have finally got FreeBSD to speak to the
internet. Now I have one more problem before I can live in peace. I
am fond of a game hosted via the Discovery channel's website :
On 07/29/2012 22:23, Jeff Tipton wrote:
On 07/29/2012 21:31, Jerry wrote:
On Sun, 29 Jul 2012 23:35:06 +0530
Manish Jain articulated:
Thanks for your inputs. I have finally got FreeBSD to speak to the
internet. Now I have one more problem before I can live in peace. I
am fond of a game hosted
On 24.07.2012 10:59, Manish Jain wrote:
Jul 23 22:36:15 bourne kernel: ugen0.2: American Power Conversion at
usbus0
Jul 23 22:36:15 bourne kernel: ugen1.2: HUAWEI TECHNOLOGIES at usbus1
Jul 23 22:36:15 bourne kernel: umass0: HUAWEI TECHNOLOGIES HUAWEI
Mobile, class 0/0, rev 1.10/0.00, addr 2
On 25-Jul-12 21:06, Erich Dollansky wrote:
Hi
On Wed, 25 Jul 2012 20:21:04 +0530
Manish Jainbourne.ident...@hotmail.com wrote:
On 25-Jul-12 18:53, Erich Dollansky wrote:
On Tue, 24 Jul 2012 14:29:07 +0530
Manish Jainbourne.ident...@hotmail.com wrote:
On 23-Jul-12 16:07, Erich Dollansky
From: Manish Jain bourne.ident...@hotmail.com
Date: Thu, 26 Jul 2012 15:37:23 +0530
Subject: Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2?
On 25-Jul-12 21:06, Erich Dollansky wrote:
I did some tinkering to make _some_ progress. My APC UPS is working fine
now under
El día Thursday, July 26, 2012 a las 07:10:00AM -0500, Robert Bonomi escribió:
[[ sneck logfile entries ]]
Could it be that I am using the wrong AT commands ? C
Best guess possibilities --
1) wrong serial port
2) wrong speed.
Recommend using a simple teminal program, like 'cu'
Hi,
On Tue, 24 Jul 2012 14:29:07 +0530
Manish Jain bourne.ident...@hotmail.com wrote:
On 23-Jul-12 16:07, Erich Dollansky wrote:
Hi,
On Monday 23 July 2012 16:46:04 Manish Jain wrote:
On 21-Jul-12 19:06, Matthias Apitz wrote:
El día Saturday, July 21, 2012 a las 06:01:11PM +0530,
El día Wednesday, July 25, 2012 a las 08:23:57PM +0700, Erich Dollansky
escribió:
You enter then
usbconfig -u 0 -a 4 dump_device_desc
and you should get something like this:
ugen0.4: Huawei CDMA Technologies MSM Huawei, Incorporated at usbus0,
cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
On 25-Jul-12 18:53, Erich Dollansky wrote:
Hi,
On Tue, 24 Jul 2012 14:29:07 +0530
Manish Jainbourne.ident...@hotmail.com wrote:
On 23-Jul-12 16:07, Erich Dollansky wrote:
Hi,
On Monday 23 July 2012 16:46:04 Manish Jain wrote:
On 21-Jul-12 19:06, Matthias Apitz wrote:
El día Saturday,
Hi
On Wed, 25 Jul 2012 20:21:04 +0530
Manish Jain bourne.ident...@hotmail.com wrote:
On 25-Jul-12 18:53, Erich Dollansky wrote:
On Tue, 24 Jul 2012 14:29:07 +0530
Manish Jainbourne.ident...@hotmail.com wrote:
On 23-Jul-12 16:07, Erich Dollansky wrote:
On Monday 23 July 2012 16:46:04
On 21-Jul-12 19:06, Matthias Apitz wrote:
El día Saturday, July 21, 2012 a las 06:01:11PM +0530, Manish Jain escribió:
Hello Erich/Matthias,
Thanks for your responses.
I do not have the usbdump command on my system. usbconfig gives the
following output :
...
ugen0.2:Back-UPS ES 650Y-IN
Hi,
On Monday 23 July 2012 16:46:04 Manish Jain wrote:
On 21-Jul-12 19:06, Matthias Apitz wrote:
El día Saturday, July 21, 2012 a las 06:01:11PM +0530, Manish Jain escribió:
I am still stuck because I can't know the syntax to run usbdump. usbdump
man usbdump
usbconfig gives you the
21 17:38 zero
Thanks for any tips/help. Which port do I need to install to get usbdump ?
Regards,
Manish Jain
+91-99620-10329
On 21-Jul-12 07:10, Erich Dollansky wrote:
Hi,
On Friday 20 July 2012 19:25:21 Manish Jain wrote:
I earlier had a Huawei EC1261-based USB modem which used
El día Saturday, July 21, 2012 a las 06:01:11PM +0530, Manish Jain escribió:
Hello Erich/Matthias,
Thanks for your responses.
I do not have the usbdump command on my system. usbconfig gives the
following output :
...
ugen0.2: Back-UPS ES 650Y-IN FW:853.m4.I USB FW:m4 American Power
Hello all,
I earlier had a Huawei EC1261-based USB modem which used to connect
smoothly to the internet under FreeBSD 8.2 using the u3g module. For
some reasons, I have had to switch to another provider (MTS) who swapped
the Huawei EC1261-based USB modem with a Huawei EC1561-based USB modem
El día Friday, July 20, 2012 a las 05:55:21PM +0530, Manish Jain escribió:
Hello all,
I earlier had a Huawei EC1261-based USB modem which used to connect
smoothly to the internet under FreeBSD 8.2 using the u3g module. For
some reasons, I have had to switch to another provider (MTS) who
Hi,
On Friday 20 July 2012 19:25:21 Manish Jain wrote:
I earlier had a Huawei EC1261-based USB modem which used to connect
smoothly to the internet under FreeBSD 8.2 using the u3g module. For
some reasons, I have had to switch to another provider (MTS) who swapped
the Huawei EC1261-based
I´m trying to enable my usb modem msa 190 up and I don´t find any driver on
ifconfig just a lo0, plip0 and eth0. This is a 3G broadband mobile connection.
Why eth0 is detected if I have just a 3G broadband usb modem Onda msa 190 up in
a usb port?
Regards
Hi,
On Sunday 02 January 2011 19:54:57 Manish Jain wrote:
Hello,
From a similar thread, I picked up some information that I should try
kldload'ing usba. But when I ran the command, I got an error message
that there is no such module. I searched under sys/modules and there
Hello,
From a similar thread, I picked up some information that I should try
kldload'ing usba. But when I ran the command, I got an error message
that there is no such module. I searched under sys/modules and there
was no usba.ko
Can somebody please tell me how to get my Huawei
Hello!
Try to follow my experience :)
http://dimapanov.wordpress.com/2010/04/14/huswei-e1550-freebsd/
02.01.2011, 21:54, Manish Jain invalid.poin...@gmail.com:
Hello,
From a similar thread, I picked up some information that I should try
kldload'ing usba. But when I ran the command, I
I know about all the drivers being for windoz. And how we're pretty much
left out in the cold. Does any solution exist? For example, if I access my
USB modem via the Wine emulator, will that work?
___
freebsd-questions@freebsd.org mailing list
http
List;
when I attach a USB modem , I am seeing this message in dmesg output on
FreeBSD6.2
ugen0: Qualcomm, Incorporated Qualcomm CDMA Technologies MSM, rev 1.10/0.00,
addr 2
But it not showing /dev/ in dmesg why ?
If it detected what will be the entry in /dev/?
Question1
Hello! I am going to install FreeBSD on my desktop, currently running
M$ Windows. I have ZTE wireless USB modem, and there is no specific
driver provided for *NIX. But, this device can be used with generic
USB serial port driver. In Linux, device is not recognized
automatically, but can
Le Sun, 31 Aug 2008 12:20:19 +0300,
Artur :) [EMAIL PROTECTED] a écrit :
Hello! I am going to install FreeBSD on my desktop, currently running
M$ Windows. I have ZTE wireless USB modem, and there is no specific
driver provided for *NIX. But, this device can be used with generic
USB serial
Hi,
I am trying to use a usb modem (sony ericsson w810i) (gprs).
The dmesg log shows up that the new device has been detected, but I don't
seem to find that in /dev.
I also tried using /dev/cuad0 in ppp configuration file in /etc/ppp but i am
unable to dial
What can be the problem ? ( I
Hi,
I am trying to use a usb modem (sony ericsson w810i) (gprs).
The dmesg log shows up that the new device has been detected, but I don't
seem to find that in /dev.
ttyU*, cuaU*
What can be the problem ? ( I already have done kldload ucmodem )
is it recognized as umodem
Abhinav Lele wrote:
Hi,
I am trying to use a usb modem (sony ericsson w810i) (gprs).
The dmesg log shows up that the new device has been detected, but I don't
seem to find that in /dev.
I also tried using /dev/cuad0 in ppp configuration file in /etc/ppp but i am
unable to dial
What can
I have some problems using my pda phone as usb-modem for my PC with
FreeBSD 6.1-RELEASE
At first I loaded:
[EMAIL PROTECTED] /home/kuzma # kldload umodem
[EMAIL PROTECTED] /home/kuzma # kldload ucom
Then I activated Modem Link at my pda-device.
According to all documentation that I founded
I have some problems using my pda phone as usb-modem for my PC with
FreeBSD 6.1-RELEASE
At first I loaded:
[EMAIL PROTECTED] /home/kuzma # kldload umodem
[EMAIL PROTECTED] /home/kuzma # kldload ucom
Then I activated Modem Link at my pda-device.
According to all documentation that I founded
Hi all,
I have a hardware(controller-based) USB modem(Zoom 2985-00-00C) that is
identified under Liunx by acm driver and can be accessed through
/dev/ttyACM0 and with some tools like cu and AT command set. This means
that it supports CDC/ACM.
But under FreeBSD 6.1(which have the latest umodem
Grad [EMAIL PROTECTED] writes:
Hi,
I am a complete newbie in FreeBSD and i was wondering if i can use my
usb modem (Crypto F200 with Conexant AccessRunner Chipset) to connect to the
internet using FreeBSD 6.1. The dmesg
command indicates that the OS sees the modem using ugen0.
I understand
Hi,
I am a complete newbie in FreeBSD and i was wondering if i can use my
usb modem (Crypto F200 with Conexant AccessRunner Chipset) to connect to the
internet using FreeBSD 6.1. The dmesg
command indicates that the OS sees the modem using ugen0.
I understand that this driver is the one generally
Grad wrote:
Hi,
I am a complete newbie in FreeBSD and i was wondering if i can use my
usb modem (Crypto F200 with Conexant AccessRunner Chipset) to connect to
the
internet using FreeBSD 6.1. The dmesg
command indicates that the OS sees the modem using ugen0.
I understand that this driver
FreeBSD MailingLists [EMAIL PROTECTED] writes:
I purchased a usb modem recently and connected it to my FreeBSD box to see
if it is compatible.
I have recompiled my kernel with
device ucom
device umodem
When I connect the modem I get the following kernel message.
ucom0: OMRON OMRON
powered
port 2 powered
port 3 powered
port 4 powered
Any suggestions would be appreciated.
TIA,
Tomoki
On 18 Apr 2006 10:20:21 -0400, Lowell Gilbert
[EMAIL PROTECTED] wrote:
FreeBSD MailingLists [EMAIL PROTECTED] writes:
I purchased a usb modem recently and connected it to my FreeBSD
I purchased a usb modem recently and connected it to my FreeBSD box to see
if it is compatible.
I have recompiled my kernel with
device ucom
device umodem
When I connect the modem I get the following kernel message.
ucom0: OMRON OMRON ME5614U2 DATA FAX MODEM, rev 1.10/1.00, addr 2, iclass
2/2
Hi guys ,
Would it be possible to make it works the ADSL Amigo
HMX - CA85UR - K8 (USB) Conexant Modem under FREEBSD ?
Please , if any of you have succedeed , please let me
know .
Thanks in advance ,
Richard Karcher
Ricardo german Kärcher
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL
dear all
i have usb modem and detect in my freebsd 5.3 , i
just want know how to configure that usb modem be
dial-up an dial-in .
thx
SONJAYA
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
Read this http://freebsd.packards-home.net/index.php
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of sonjaya
Sent: Tuesday, March 29, 2005 4:28 AM
To: freebsd-questions@freebsd.org
Subject: usb modem
dear all
i have usb modem and detect in my freebsd
hello guys , I have installed a usb modem andin my FreeBSD 5.1 box,
the system has created a /dev/ugen0 and /dev/ugen0.1, but when I try
to do a cu using ugen0 or ugen0.1 I dont get any answer from the
modem, cu just says that the device is not configured. Is there any
other file I need
, freebsd-questions.
Whether probably to adjust ZyXEL ADSL USB modem on FreeBSD? Any
information on adjustment of ADSL USB modems interests.
Do not offer reading handbook!
--
,
Peter mailto:[EMAIL PROTECTED]
___
[EMAIL
can anybody give me a hand to install a usb dsl modem?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi,
I have recently required a USB modem (56k). On the casing it says it is a:
sitecom connectivity dc-009 56k usb modem
Plug in and dmesg says:
ugen0: Conexant USB modemInc. USB V.90 56k/FAX Modem erface,
rev1.00/0.01, addr 2
So far so good. So i scoot over to /etc/ppp/ppp.conf and type
no other driver for the USB device can apply. You won't be able to use your
USB modem through the driver, you'll need umodem(4) and ucom(4) support in
either your kernel or load the modules.
Cheers, J.
___
[EMAIL PROTECTED] mailing list
http
I have an Alcatel Speed Touch USB ADSL modem. Anyone can help me
configuring it in FreeBSD 5.2.1. dmesg recognizes the device fine and
my provider connects using PPPoE.
Unfortunately since I am at work I cannot send my dmesg output.
Thanks in advance.
you can try this link
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/pppoa.html
- Original Message -
From: Daniela [EMAIL PROTECTED]
To: Tony Frank [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Sunday, February 22, 2004 10:23 PM
Subject: Re: USB modem support?
On Saturday 21
On Saturday 21 February 2004 10:11, Tony Frank wrote:
Hi,
On Sat, Feb 21, 2004 at 02:26:24AM +, Daniela wrote:
I'm having problems with an USB ADSL modem (Alcatel Speed Touch). It is
recognized at boot time, but when I try to connect, it tells me that the
modem is busy.
I symlinked
Hi,
On Sat, Feb 21, 2004 at 02:26:24AM +, Daniela wrote:
I'm having problems with an USB ADSL modem (Alcatel Speed Touch). It is
recognized at boot time, but when I try to connect, it tells me that the
modem is busy.
I symlinked /dev/cuaa3 to /dev/ugen1 (that's the device that showed up
I'm having problems with an USB ADSL modem (Alcatel Speed Touch). It is
recognized at boot time, but when I try to connect, it tells me that the
modem is busy.
I symlinked /dev/cuaa3 to /dev/ugen1 (that's the device that showed up in the
boot messages) and directed the kppp utility to use
+++ Bryan JJ Buckley [freebsd] [14-01-04 17:54 +]:
| Hi,
| How do I tell FreeBSD 5.1-RELEASE to recognise my
| STMicroelectronics USB Communicator as a umodem, and
| not as a ugen? Yes, I do have umodem and ucom both
| loaded. I have scoured the umodem(4) and ucom(4) man
| pages (which are
Hi,
How do I tell FreeBSD 5.1-RELEASE to recognise my
STMicroelectronics USB Communicator as a umodem, and
not as a ugen? Yes, I do have umodem and ucom both
loaded. I have scoured the umodem(4) and ucom(4) man
pages (which are pretty short) as well as the usb(4)
man page, ugen(4), usbd(4) and
I have a USB Modem, and FreeBSD 5.1-RELEASE discovers it
as
ugen0: STMicroelectronics USB Communicator, rev 1.00/2.00, addr 2
Any possibility that I can use this device for PPP??
Looking for hints.
Thanks
-Wash
--
Odhiambo Washington [EMAIL PROTECTED] The box said 'Requires
Wananchi
Hello All.
New to BSD so please excuse my ignorance. Does anyone know if the BT Voyager 100 USB
modem can be setup in BSD I know it has a connexant chipset but that is about all. My
windows disk works fine but with dual boot it would be nice to use Broadband in my
FreeBSD system aswell
Hi, hope you can answer this one.
Couldn't find anything about this on the web site.
Is it possibel to get Alcatel's Speedthouch USB modem for ADSL broadband
internet to work on FreeBSD? If so, what files do I need and what is the
step-by-step to get it working?
If it helps, BT Openworld is my
- Original Message -
From: Andris Stanga [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, July 12, 2003 10:09 AM
Subject: ADSL Speedtouch USB Modem
Hi, hope you can answer this one.
Couldn't find anything about this on the web site.
Is it possibel to get Alcatel's Speedthouch
I have a AzTech USB modem, I found a linux driver on their website and it
works. I have problems surfing on Windows it keeps screwing up my
connection, and I would like to get rid of linux to make more space for
FreeBSD. My question is how much work is involved to convert the code from
On Fri, 2003-06-20 at 11:33, Jeandre du Toit wrote:
I have a AzTech USB modem, I found a linux driver on their website and it
works. I have problems surfing on Windows it keeps screwing up my
connection, and I would like to get rid of linux to make more space for
FreeBSD. My question is how
On Thu, Jun 05, 2003 at 09:24:18AM +0200, Jeandre du Toit wrote:
Does anyone know how to configure a USB Modem on FreeBSD?
Please Cc me.
Check here:
http://www.freebsd.org/releases/5.0R/hardware-i386.html#USB
If your modem implements the Communication Device Class, it
will work
Hello!
I am trying to set up my USB modem for dialup on 4.7 Release.
It is detected as ugen0. I have been trying to set it up as umodem0.
The modem has a driver available for it in Linux (reported to work)
slmdm-2.6.16 @ http://www.smartlink.com
Is there any way to use this driver in FreeBSD
The linux driver won't work on FreeBSD.
On Sun, 9 Feb 2003, Sleepy wrote:
Hello!
I am trying to set up my USB modem for dialup on 4.7 Release.
It is detected as ugen0. I have been trying to set it up as umodem0.
The modem has a driver available for it in Linux (reported to work)
slmdm
Hi! Does anyone have any experience setting up HylaFAX to work with a Zoom
2986L USB modem in FreeBSD?
I'm running STABLE (as of last night), with device umodem (and ucom,
although that doesn't seem to do anything) enabled in the kernel. I can
properly see the modem -- cu will connect to /dev
Hello,
I want to use a USB modem on FreeBSD 4.7-STABLE.
First I do not know where to start. Is there any how-to
pages?
I looked at umodem.c file. There is not so much
explanations in the code.
I searched the archieves for a starting point. I could not
find any helpful message for me.
Here
82 matches
Mail list logo