user@new | Service-Name:2| += | INET |
| 5 | testuser@new | Service-Options:2 | += | 1|
++--+---++--+
5 rows in set (0.00 sec)
Debug: rlm_perl: Added pair NAS-Port-Type = Virtual
Debug: rlm_perl: Added
Hi Alan,
Thank you for your response. I've been having a lot of trouble reaching
the mailing list, my responses are not getting through. Hopefully this
one will!
Below is the output from the debug mode:
rad_recv: Access-Request packet from host 127.0.0.1 port 1026, id=60,
leng
It's work!!.. thanks..
--haizam
- Original Message -
From: "Bjørn Mork" <[EMAIL PROTECTED]>
To: "FreeRadius users mailing list"
Sent: Thursday, January 25, 2007 6:05 PM
Subject: Re: rlm_perl DEBUG log with garbage output
"Rohaizam Abu Bak
x27;} = "5" ;
.
print attr
.
return RLM_MODULE_UPDATED
but that not affect the return vlaue :
Thu Mar 5 23:22:30 2009 : Debug: rlm_perl: RAD_REPLY: Cisco-AVPair =
throttle=55
Thu Mar 5 23:22:30 2009 : Debug: rlm_perl: RAD_REPLY: Session-Timeout = 36
Thu Mar 5 23:22:30 20
request packet (i.e. the one from the NAS),
not the packet that's about to be sent to the home server.
Try: $RAD_PROXY_REQUEST{'User-Name'} = 'testuser';
I added:
use vars qw(%RAD_REQUEST %RAD_REPLY %RAD_CHECK %RAD_PROXY_REQUEST);
and it didn't work, change resu
Alex rsm wrote:
>
> And added the following in src/modules/rlm_perl/example.pl
>
> sub authorize {
>print "This is a TEST\n";
> .
> }
>
> However, When I send a simple test request I don't see my debug line.
> I also don't see
Hello,
Please see the debug log: (log output from command >> freeradius -fxx -l
stdout) and with "freeradius -X" it works fine.
My issue is that debug mode "freeradius -X" the authentication works great but
once I try with normal mode it doesn't. I have check
"Rohaizam Abu Bakar" <[EMAIL PROTECTED]> writes:
> Hi,..
>
> running xlat within rlm_perl.. giving correct result.. but what concern me
> is that.. in debug log.. there are garbage output as below:-
>
>
> radius_xlat: '.*'
> radius_xlat: Run
ribute data is truncated
at the first octet with value 00 :-
### freeradius -Xx snippets
...
Thu Feb 28 10:35:23 2013 : rlm_perl: packed data: 10ac100a02
Thu Feb 28 10:35:23 2013 : Debug: rlm_perl: Added pair
DHCP-Classless-Static-Route = ??
t...@kalik.net a écrit :
thanks for your return. I have added:
$RAD_REPLY{'Framed-IP-Address'} = "10.218.6.1";
return RLM_MODULE_OK;
but no change, he use the pool included into the cisco ASA (10.218.4.5)
a error of me ?
When I call a perl module via rlm_perl and don’t undef
%RAD_CHECK and %RAD_REPLY before exiting, rlm_perl duplicates some attributes
contained within the hashes. For instance:
At entry to rlm_perl instance:
$RAD_CHECK{‘Ldap-Group’} is an ARRAY: (GroupA,
GroupB)
After exiting the
Hi everyone.
Im trying to get RLM_perl to respond with two Cisco-AVPair lines (what
would usually be done with += in users)
Unfortunately only the first seems to get sent back to the nas - debug
output follows
rlm_perl: Added pair Cisco-AVPair = ip:dns-servers=10.10.10.10 10.10.10.12
rlm_perl
Hello list,
is there an option in radiusd.conf how to enable debug logging only for
several rlm_modules,
e.g. I have rlm_perl and I only want debug messages for this.
Thanks for your reply in advance.
T.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
#x27;t use Data::Dumper and I can run Freeradius with my perl
module.
My problem is with the hashes that rlm_perl provide to my script ¡rlm_perl
add in the reply hash an attribute Relaciones with the value of the
attribute Nombre-Completo, and also add Nombre-Completo!
Debug:
[ldap1] performing user aut
bi...@antworte.me wrote:
> is there an option in radiusd.conf how to enable debug logging only for
> several rlm_modules,
> e.g. I have rlm_perl and I only want debug messages for this.
Not at this time.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius
Alexander Clouter writes:
> Alex rsm wrote:
>>
>> And added the following in src/modules/rlm_perl/example.pl
>>
>> sub authorize {
>>print "This is a TEST\n";
>> .
>> }
>>
>> However, When I send a simple test
Hi,..
running xlat within rlm_perl.. giving correct result.. but what concern me is
that.. in debug log.. there are garbage output as below:-
radius_xlat: '.*'
radius_xlat: Running registered xlat function of module y5perl for string
'%{User-Name}:%{NAS-Identifie
Olivier Bilodeau wrote:
> http://wiki.freeradius.org/Rlm_perl#Logging refers to:
> 0 - Debug
> 1 - Auth
Those are wrong. See src/include/radiusd.h, L_DBG, etc.
I've fixed the Wiki.
> I expected Debug not to go out in radius.log and Auth to do since I
> specified Auth to
&radiusd::radlog(L_DBG, "RAD_CONFIG: $_ =
$RAD_CONFIG{$_}");
}
return RLM_MODULE_OK
}
else {
$RAD_REPLY{'Reply-Message'} = "authentication failure";
return RLM_MODULE
for request 0
perl_pool: item 0x9413670 asigned new request. Handled so far: 1
found interpetator at address 0x9413670
### Request attributes debug ##
rlm_perl: Added pair Service-Type = Framed-User
rlm_perl: Added pair Framed-Routing = Broadcast-Listen
rlm_perl: Added pair Framed
I'm not sure how the script could be blocking the server after it's already ran
and returned the updated packet so the proxying can take place which does
happen:
• rlm_perl: Changing User-Name: legg...@yubiauth.mcs.example.com
• rlm_perl: Added pair NAS-Port-Type
Hello,
I've tested adding my vendor specific attributes to check list, and the
problem persist.
Here is the debug info:
rad_recv: Access-Request packet from host x.x.x.x port 32880, id=4,
length=75
User-Name = "a...@unex.es"
User-Password = "111&quo
Бен Томпсон wrote:
> I tried checking out the git master code, but it just hangs when
> calling rlm_perl. This is the last line I see when running in debug
> mode :-
>
> Fri Mar 1 12:46:49 2013 : Debug: (0) modsingle[authorize]: calling
> perl (rlm_perl) for request 0
>
Hello,
Here is the debug info:
>From the information it looks like I have added the information correctly
>however it is not sent to the client:
--snip--
rlm_perl: Added pair Framed-Protocol = PPP
rlm_perl: Added pair Framed-Netmask = 255.255.255.255
rlm_perl: Added pair Service-Type =
> However, When I send a simple test request I don't see my debug line. I also
> don't see the message "perl loaded" when start Freeradius in debug mode
> (radiusd -X).
>
> Am I missing anything?
Could you post the debug. Might be you don't have rl
Hi,
I have problem with PAP autentification on freeradius-3.0.0, but on
freeradius-2.2.1 everythink works correct. Could you please help me, thx.
Debug output for freeradius-3.0.0:
radiusd@tdrad1test:/storage/app/radius/raddb/auth-new$
/storage/app/radius/freeradius-3.0.0/sbin/radiusd -X -d
_REPLY{'Response-Packet-Type'} = "Access-Challenge";
&log_request_attributes;
return RLM_MODULE_HANDLED;
}
else {
# Reject user and tell him why
$RAD_REPLY{'Reply-Message'} = "Denied access by
Y{'Codigo-Reject'}=11; #Sin-Relacion
}
return RLM_MODULE_REJECT;
}
Everything works fine.
My problem is that rlm_perl duplicate an attribute in %RAD_REPLY hash.
Debug:
rad_recv: Access-Request packet from host x.x.x.x port 56822, id=100,
length=75
User-Name = "a
mp;radiusd::radlog(L_DBG, "RAD_CONFIG: $_ =
> $RAD_CONFIG{$_}");
> }
> return RLM_MODULE_OK
> }
> else {
> $RAD_REPLY{'Reply-Message'} = "authentication failure";
>
Hi All,
I'm trying to authorize a user by using the rlm_perl module only. I.e., I
only want the perl script to control the authorization.
In radiusd.conf I have set:
proxy_requests = no
and in the authorize part the "files" statement is commented (otherwise
freeradius will l
Hello all,
I have freeradias 1.0.5 installed with the rlm_perl module, and the
trouble I'm having is that the user-name attribute is an empty string
within the 'authenticate' routine I have for the perl script.
My goal is to have the perl script handle the authenticat
2013/3/1 Alan DeKok :
> Бен Томпсон wrote:
>> I tried checking out the git master code, but it just hangs when
>> calling rlm_perl. This is the last line I see when running in debug
>> mode :-
>>
>> Fri Mar 1 12:46:49 2013 : Debug: (0) modsingle[authorize
Hi..
FR:1.1.2
FBSD:6.0
My rlm_perl keep logging error as example below. Everytime this happen
radiusd will hang and DO NOT respond to any request.
But this NEVER happen while running in debug mode and working fine.
rlm_perl is used to load timeout based on certain rules.. u can
sd.conf how to enable debug logging only for
>> several rlm_modules,
>> e.g. I have rlm_perl and I only want debug messages for this.
>
> Not at this time.
>
> Alan DeKok.
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.h
Hi All,
Ok, after reviewing all the information that was received, I've setup my
FreeRadius
as following:
1. The authorize and authenticate sections are setup to activate digest and
perl.
2. My rlm_perl script utilizes the following lines in order to return the
unencrypted
user pas
Wed Oct 20 15:39:10 2010 : Info: ++? if (control:Auth-Type == LDAP)
Wed Oct 20 15:39:10 2010 : Info: ? Evaluating (control:Auth-Type ==
LDAP) -> TRUE
Wed Oct 20 15:39:10 2010 : Info: ++? if (control:Auth-Type == LDAP)
-> TRUE
Wed Oct 20 15:39:10 2010 : Info: ++- entering if (con
c for my SIM, but after the third triplet, I just
have:
Don't trim the debug. Critical info is higher up - like the actual
radius packet!
I always trim it the first time, I don't want to spam the planet in case
the issue is simple :) Here is the entire debug (with my IMSI trimmed):
r
returns ok
Tue Jul 27 13:01:03 2010 : Info: ++- group ntlm_auth returns ok
Tue Jul 27 13:01:03 2010 : Info: ++[expiration] returns noop
Tue Jul 27 13:01:03 2010 : Info: ++[logintime] returns noop
GOT CLONE -1208792368 0x9f8ff70
Tue Jul 27 13:01:03 2010 : Debug: rlm_perl: PacketFence SWITCH:
10.2.1
estion again.
Please tell me the possible problems of not getting these values:
'Digest-User-name', 'Digest-Realm', 'Digest-Method', 'Digest-Uri',
'Digest-Nonce', 'Digest-Response'
here is the full output when I run in debug mode
Hi there!
It's been a while.. François turned out to be our official
freeradius-users correspondent lately ;)
So, I'm changing some things in our rlm_perl module and tried to make a
better use of the logging facilities provided by the freeradius core.
http://wiki.freeradius.org/Rlm_pe
added the following in src/modules/rlm_perl/example.pl
sub authorize {
print "This is a TEST\n";
.
}
However, When I send a simple test request I don't see my debug line. I also
don't see the message "perl loaded" when start Freeradius in debug mode
(
] personType -> Person-Type = "it"
WARNING: No "known good" password was found in LDAP. Are you sure that the
user is configured correctly?
[ldap] user atrack authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
...
I did notice
Hi all,
Please disregard, I've solved the thing ;-) Silly typo in the return.
Z2L
- Original Message -
From: "FreeRadius-ML" <[EMAIL PROTECTED]>
To: "freeradius-users"
Sent: Thursday, July 26, 2007 6:41:21 PM (GMT+0200) Asia/Jerusalem
Subject: Fwd: fin
y accessing using RAD_REQUEST or RAD_CHECK, so that I can calculate my ha1,
ha2 for md5 encryption.
Please help.
Output log file when run in debug mode by using radiusd -X
rad_recv: Access-Request packet from host 192.168.1.227 port 32817, id=222,
length=262
User-Name = "[EMAIL PROT
t-Uri',
'Digest-Nonce', 'Digest-Response'
And please tell me the things that I should change in radius server
configuration to get these digest attributes.
for the information I've mentioning the debug when run in radiusd -X
rad_recv: Access-Request packet from h
to be something seriously wrong with the way this config
is working, because rlm_perl is calling the AUTHORIZE function but not
AUTHENTICATE. I've pasted the debug of an authentication attempt below.
It appears to be taking the CLIENT mschap authentication and somehow
applying t
I think I may have found a bug in rlm_perl? I have written script with
the aid of another freeradius list member that checks to see if a user
is in a certain samba windows group. If they are not in the group (the
wireless group) the module rejects the login. The module works perfectly
except
Josh Hiner wrote:
I think I may have found a bug in rlm_perl? I have written script with
the aid of another freeradius list member that checks to see if a user
is in a certain samba windows group. If they are not in the group (the
wireless group) the module rejects the login. The module works
Hi,
Thanks for your reply. i am going here to post the
debug logs. from the log it seems rlm_per is loaded
successfully but when i am trying to call authorize
and authenticate function from example.pl, the
functions are not calling well.
Here is full configuration what i did to work with
perl
Hello Arran,
> > DEFAULT User-Name =~ "^v104([^@]+)"
> > User-Name := "%{1}@V104.GMVL.DE"
> Can you got some debug output or even just the value of the User-Name?
> It may just be the escaping is less crazy than it used to be.
username is:
freeradius i am using rlm_perl authentication for my users.
When i use cgi page or radtest tool and send clean password, everything
works flawless...
But if i decide to use chap somthing strange happens..
If i type correct user/pass freeradus denies it.. But it i type the
password wrong, freeradius
Hi,
First, the version I'm using:
# freeradius -v
freeradius: FreeRADIUS Version 2.1.8, for host x86_64-pc-linux-gnu, [...]
I'm trying to control the attribute-ordering when using "rlm_perl". Thus far my
experience is that this is not possible. My theory is that this
, the
chap/mschap/eap modules work, so you might as well let them take care of
setting an Auth-Type for things they handle, and you only worry about
everything else.
On Tue, 2004-02-17 at 03:41, loz wrote:
> Hi All,
>
> I'm trying to authorize a user by using the rlm_perl module only.
Could someone show me how to process an access-accept via rlm_perl? The
example in the script example.pl still causes an access-reject nomater
what I try.
That isn't enough information, except to tell you to return a proper
value such as RLM_MODULE_OK. Please post debug o
Hello,
I have a freeradius 1.0.X server setup with ppp and pptp using a mysql
DB for user authentication.
Here I assign static IP's and users to groups. We wish to use rlm_perl
instead of the sql module so we can authenticate the users against a in
house application.
I have
[EMAIL PROTECTED] wrote:
> I have tried the example.pl and it still gives me a access-reject
> message.
Please provide your rlm_perl configuration and debug output of radiusd -X
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spru
e ntlm_auth from winbind
> to pass MSCHAPv2 response from FR to AD.
> rlm_perl: Added pair NT-Password =
> 0x33343133344331374133364243314244413638324232323239443431
> [pap] Normalizing NT-Password from hex encoding
Just curious. Does ALL the failed user have NT-Password at
uot;;
> >
> >
> > $RAD_REPLY{'DHCP-Domain-Name-Server'} = \...@data;
>
> Which should be equivalent to doing
>
> $RAD_REPLY{'DHCP-Domain-Name-Server'} = ["nameserver_1",
> "nameserver_2"
hi friends,
I am really sorry to post it again. Because still i
did not find any reply to solve my problems.
--- Abdul Lateef <[EMAIL PROTECTED]> wrote:
> Hi,
>
> Thanks for your reply. i am going here to post the
> debug logs. from the log it seems rlm_per is loaded
>
.
---
Ok, I and have made.
But the matter is that my radius will be authenticate and acccounting some
services with different NAS.
And very much it would be not bad to carry them.
And if to start radius without a debug mode it what that time will work
normally, the truth only any
Alexander Shikoff wrote:
> Now radiusd receives a DHCP packet and:
>
> Received DHCP-Discover of id fcb1c6c0 from 193.200.84.232:67 to
> 193.200.85.245:67
> [...]
> server dhcp {
> Trying sub-section dhcp DHCP-Discover {...}
> +- entering group DHCP-Discover {...}
>
Hello,
No, that did not work, with the setting below the debug shows:
--snip--
.
rlm_perl: Added pair Framed-IP-Address = ��M
...
Sending Access-Accept of id 73 to 127.0.0.1 port 32813
Framed-IP-Address = 255.255.255.254
--snip--
Before when I was setting it with a
updated
>>>>
>>>>
>>>> It seems that Packet-Original-Timestamp does not contain anything. I
>>>> was under the impression that it is generated automatically by
>>>> FreeRADIUS. Is this not the case
>>>
Hi Alan,
Of course I updated the PERL script. I simply modified the debug function to
be:
sub log_request_attributes {
# This shouldn't be done in production environments!
# This is only meant for debugging!
for (keys %RAD_REQUEST) {
&radiusd:
Hello,
It seems that it is not using rlm_perl for authentication. I would
assume that this is because according the document I was following, it
had me add:
Auth-Type Perl {
perl
}
To the authentication section, which means if the Auth-Type is set to
perl then using
Hi
Sorry to restart the same subject, but actually i am search .. i am
search
but i don't see any solution ...
I use:
FreeRadius with a Perl Script
A Cisco ASA5510 IOS 8.0
In debug i have:
When a user don't have IP,
l1" in the listen{} section, I get error:
/usr/local/etc/raddb/radiusd.conf[56]: System does not support binding
to interfaces. Delete this line from the configuration file.
FreeRadiusd debug messages:
Received DHCP-Discover of id 2083766121 from 0.0.0.0:68 to 0.0.0.0:67
DHCP-O
On 11 March 2010, at 03:43, wrote:
>
> Hello list,
>
> is there an option in radiusd.conf how to enable debug logging only for
> several rlm_modules,
> e.g. I have rlm_perl and I only want debug messages for this.
>
> Thanks for your reply in advance.
It can be don
Hi,
I'm trying to implement proxy using rlm_perl, I've applied the patch
that should allow me to modify the attributes, but it doesn't seem to
work. (freeradius 1.1.2)
Perl code:
# Function to handle pre_proxy
sub pre_proxy {
&radiusd::radlog(1, "entering pre-p
4 10:06:04 +0800
> From: Mike Groeneweg <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: rlm_perl & Auth-Type
> Reply-To: [EMAIL PROTECTED]
>
> This is a cryptographically signed message in MIME format.
>
> --ms090006000508040404020402
> Conten
равда только какое-то.
> ---
> Ok, I and have made.
> But the matter is that my radius will be authenticate and acccounting some
> services with different NAS.
> And very much it would be not bad to carry them.
> And if to start radius without a de
The rlm_perl Documentation (in the Wiki) lists the $type values for
radiusd::radlog($type, $message) as
0 - Debug
1 - Auth
2 - Proxy
3 - Info
4 - Error
while include/radiusd.h says
#define L_DBG 1
#define L_AUTH
l fine, as long as i'm not supply any domain-name. if i
supply
a domain-name it immediately fails with
rlm_eap: Identity does not match User-Name, setting from EAP Identity.
could anybody help me with that?
and yes, there is no entry in "users" for EAP.
thx
michael
*
.
If you want to debug - search this list or google using keywords "debug
rlm_perl"
>
>
> I understand that freeradius has a newer version available - but I am
> hesitant to upgrade a production server without a very good reason. And I
> could not find such reason for
Hi
please use mailing list instead of writing to me directly.
Regarding the trouble try reinstalling the Data::Dumper module and check that
it is linked with correct perl library.
On Wednesday 12 July 2006 03:09, you wrote:
> Hello!
>
> I have a problem with rlm_perl.
>
>
Hi,
I am using freeradius (rlm_perl) for a VoIP system for a long time now
and today I tried to use it for routing purposes as well.
In my authorize function of my perl script I am assigning the routing info
to $RAD_REPLY :
...
my @final_routing
Ok,
openSLL is installed on my server. No more issue on EAP. However, my debug line
in sub authenticate still is not being called:
#example.pl
# Function to handle authorize
sub authorize {
print "TEST-authorize: username=$RAD_REQUEST{'User-Name'}\n";
: Debug: auth: Failed to validate the user.
Mon Feb 16 09:56:31 2004 : Debug: Delaying request 0 for 1 seconds
Mon Feb 16 09:56:31 2004 : Debug: Finished request 0
Mon Feb 16 09:56:31 2004 : Debug: Going to the next request
Mon Feb 16 09:56:31 2004 : Debug: Thread 1 waiting to be assigned a
>Here is the debug using radtest
>radtest RadUser [EMAIL PROTECTED] localhost 10 testing123
>
..
>rlm_perl: RAD_REQUEST: User-Name = RadUser
..
>rlm_perl: Added pair User-Name = raduser
..
>Sending Access-Accept of id 225 to 127.0.0.1 port 38149
>Tunnel-Med
> I was running freeradius 2.0.5 on my Centos 5.2 server
> using rlm_perl. When I upgraded to 5.3 I get :
>
> "rlm_perl: perl_parse failed: /billing/bin/billing.pl not found or has
> syntax errors."
>
> I googled it and found that this may be caused by libperl.so
Bjørn Mork wrote:
> Try this patch:
Looking at the code, it appears the strncpy is even more wrong than
just adding "+1". I've committed a different fix which should avoid
other errors (like potential buffer overflows with data taken from
rlm_perl).
It's only exploi
Hi everybody.
FreeRadius ver. 2.1.10 from git
My problem is string :
===
++[perl] returns reject
from radiusd -X debug
The last strings in perl script that executed :
&radiusd::radlog(L_ERR, " --- RLM_MODULE_OK ---".RLM_MODULE_OK.&quo
30.07.2010 19:03, Urazaev Vadim пишет:
Hi everybody.
FreeRadius ver. 2.1.10 from git
My problem is string :
===
++[perl] returns reject
from radiusd -X debug
The last strings in perl script that executed :
&radiusd::radlog(L_ERR, " --- RLM_
Hello out there,
I'm testing the FreeRADIUS Version 2.1.12 Modul with AD Integration
following the deployingradius.com Guide.
Installed winbind and samba Version 3.6.3 and ntlm_auth tests are fine.
Now i'm testing with radtest while running radius in Debug mod.
The following line has
t;>>> expand: %{Packet-Original-Timestamp} ->
>>>>> +++[request] returns updated
>>>>> ++- if (!Event-Timestamp) returns updated
>>>>>
>>>>>
>>>>> It seems that Packet-Ori
er_1",
"nameserver_2",
"nameserver_3",
"nameserver_x"];
so I don't think that's the problem.
But we are all guessing, since we
debug output of the radius
Module: Instantiated detail (reply_log)
Listening on authentication *:1645
Listening on accounting *:1646
Ready to process requests.
rad_recv: Access-Request packet from host 202.xx.xx.xx:52743, id=81,
length=151
NAS-Identifier = "pppoe-test.lumbininet.c
sites-enabled/default file,
unfortunately I still didn't get the values of these attributes in my perl
code to authenticate. I am confusing what should I emphasized, please help.
*I am submitting the complete radius log when it run in debug mode before
authenticate a user here*
FreeRADIUS
Sorry for sending this message twice, but I forgot the debug output.
---
Thanks for reply. But the client that I use, only supports PAP and CHAP
requests and neither of them initiates the server to send an Access Challenge.
That is why I tried to create the challenge with the help of the perl
Ok, debug logs and config files are attached.
It looks like the problem could be with rlm_perl. as the proxying
happens correctly if we disable the perl module completely.
However, even with no logic happening in the perl script, additional
\'s are added to the attributes.
Please se
Hi Alan,
I'm facing the issue with configuration EAP-TTLS, LDAP and Perl and using
test client as "eapol_test".
Please find the debug logs below:
rad_recv: Access-Request packet from host 127.0.0.1 port 45673, id=0,
length=206
User-Name = ""
N
ruct stat sb;
>
> The other errors indicate a problem with the normal build includes. How
> did you try and rebuild it? I suspect there is a way to just rebuild
> rlm_perl, but I haven't tried to do that on version 2. I suspect you
may
> need to rebuild the entire freeradius.
>
Alexandr Kovalenko wrote:
> Then I have few questions:
> 1. How could this be that it worked in 1.1.7 (but only 1st auth
> attempt, all further didn't, until restart)?
Look at the code. I don't want to debug it.
> 2. Is there any work-in-progress project on add
>>> +++[request] returns updated
>>> ++- if (!Event-Timestamp) returns updated
>>>
>>>
>>> It seems that Packet-Original-Timestamp does not contain anything. I
>>> was under the impression that it is generat
t; > Trying sub-section dhcp DHCP-Discover {...}
> > +- entering group DHCP-Discover {...}
> > rlm_perl: -authorization.pl- : post_auth
> > ^^^
>
> Post *all* of the debug output. You've deleted the pieces which can
> help
n Feb 16 09:56:31 2004 : Debug: Threads: total/active/spare threads =
> 5/1/4
> Mon Feb 16 09:56:31 2004 : Debug: Waking up in 5 seconds...
>User-Name = "testuser"
>User-Password = "testpasswd"
>NAS-IP-Address = 134.115.81.61
>Framed-
ll the digest entry
>in authorize and authenticate section in the sites-enabled/default file,
>unfortunately I still didn't get the values of these attributes in my perl
>code to authenticate. I am confusing what should I emphasized, please help.
>
>
>*I am submitting the
I have freeradius 1.05 configured with rlm_perl to handle
authentication, and the problem seems to be that the
$RAD_REQUEST{'User-Name'} variable is an empty string within the perl
script I have set up. The perl script is based on the example.pl script
provided with freeradius.
My
on Feb 16 09:56:31 2004 : Debug: modcall: entering group authorize for
request 0
Mon Feb 16 09:56:31 2004 : Debug: modsingle[authorize]: calling perl
(rlm_perl) for request 0
Mon Feb 16 09:56:31 2004 : Debug: perl_pool: item 0x8117340 asigned new
request. Handled so far: 1
Mon Feb 16 09:56:31 2
13
Tunnel-Medium-Type := 6
Tunnel-Private-Group-Id := 999
}
to the outer post-auth section.
3. Verify that the server a) works, and b) sends the above
attributes in the Access-Accept (check the debug output).
4. Only after all the above, replace the update reply {} with
rlm_perl, and wo
1 - 100 of 271 matches
Mail list logo