of these minor updates to the kernel?
Thanks!
--
Mark Creamer
-
You can help the poorest of the poor
Matthew 25: Ministries
http://www.m25m.org
--
gentoo-amd64@gentoo.org mailing list
I may have caused this recently when I tried installing amarok, not sure. Now
when I log in to KDE, I get a message: (Title: Error - artsmessag) Sound
Server Fatal Error: cpu overload, aborting. Sound does not work now. Any idea
what to do? Thanks!
--
Mark Creamer
-
You can
Is it possible to periodically create a set of DVDs with all the packages for
the AMD64 architecture so I can install software when I don't have Internet
access? If so, what would I need to do to accomplish this?
Thanks!
--
Mark Creamer
-
You can help the poorest of the
Thank guys, that took care of the problem. I appreciate the help!!
On Sunday 20 March 2005 01:30 pm, ardour wrote:
> Mark Creamer wrote:
> >Trying to install Crossover office from shell script, since emerge says
> > it's masked, and ACCEPT_KEYWORD still doesn't
ch file or directory
Is this something that might be fixable, or will crossover just not work with
AMD64?
Thanks,
--
Mark Creamer
-
You can help the poorest of the poor
Matthew 25: Ministries
http://www.m25m.org
--
gentoo-amd64@gentoo.org mailing list
in /etc/cups are still available?
> What is the output in error_log?
>
> Matthias
>
> Am Dienstag, 15. März 2005 13:13 schrieb Mark Creamer:
> > I'm trying to set up my machine to print to an external JetDirect device.
> > It's the kind with three parallel ports. M
I think I just need to start
over. What packages do I need to make sure I have? I tried following the
Gentoo cups instructions, but it doesn't deal with working with networked
printers. Thanks!
--
Mark Creamer
-
You can help the poorest of the poor
Matthew 25: Minis
Ah...shoot. sorry guys, I found it on one of the forums. Sorry to post before
searching properly. Thanks,
Mark
On Wednesday 09 March 2005 09:25 pm, Mark Creamer wrote:
> I just emerged phpMyAdmin, and tried to start it in my browser. Rather than
> the usual main screen I'm used t
ple answer. Anyone
know what's up? Thanks,
--
Mark Creamer
-
You can help the poorest of the poor
Matthew 25: Ministries
http://www.m25m.org
--
gentoo-amd64@gentoo.org mailing list
I noticed Wine is masked on my AMD64 system. Anyone know if there is a version
that will work? As an experiment, I placed a version in my package.keywords
file, but the install fails. Thanks,
--
Mark Creamer
-
You can help the poorest of the poor
Matthew 25: Ministries
http
Barry, that was it. I had to configure alsa and add my mixer. Now it works
great. Thanks so much and have a great weekend!
Mark
On Saturday 05 March 2005 10:21 pm, [EMAIL PROTECTED] wrote:
> Mark Creamer <[EMAIL PROTECTED]> wrote:
> > Thanks all for your help with the USB sugges
ated sound drivers configured as modules also. So
far, I'm not getting any sound though. Any tips you might have for that?
--
Mark Creamer
-
You can help the poorest of the poor
Matthew 25: Ministries
http://www.m25m.org
--
gentoo-amd64@gentoo.org mailing list
rror is appreciated. Thank you. Cintas Corporation.
> >
> >>--
> >>gentoo-amd64@gentoo.org mailing list
> >
> >--
> >gentoo-amd64@gentoo.org mailing list
> >
> >
> >
> >This e-mail transmission contains information that is intended to be
> > confidential and privileged. If you receive this e-mail and you are not
> > a named addressee you are hereby notified that you are not authorized to
> > read, print, retain, copy or disseminate this communication without the
> > consent of the sender and that doing so is prohibited and may be
> > unlawful. Please reply to the message immediately by informing the
> > sender that the message was misdirected. After replying, please delete
> > and otherwise erase it and any attachments from your computer system.
> > Your assistance in correcting this error is appreciated. Thank you.
> > Cintas Corporation.
> >
> >
> >--
> >gentoo-amd64@gentoo.org mailing list
>
> --
> gentoo-amd64@gentoo.org mailing list
--
Mark Creamer
--
gentoo-amd64@gentoo.org mailing list
to figure out if it's situational or if it will occur for
> any 32-bit Flash running in 32-bit Emulation.
>
> -Kow
> [EMAIL PROTECTED]
> - Original Message -
> From: "Mark Creamer" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Su
bert Longbottom wrote:
> On Wed, February 23, 2005 11:54 am, Mark Creamer said:
> > I corrected the monitor specs first, rebooted. No change. Then I changed
> > the
> > driver to nv as Barry suggested, and resolution settings look great. Now,
> > do
> > I leave it th
MB DDR AGP
in my xorg.conf, I notice that the line Boardname is "Unknown Board". Does
that matter, or is it just informational?
Thanks
On Wednesday 23 February 2005 12:33 am, [EMAIL PROTECTED]
wrote:
> Mark Creamer <[EMAIL PROTECTED]> wrote:
> > When I run glxin
I checked the manual, and it says 1280x1024 @ 85Hz is recommended. I set the
1280x1024, but didn't see anyplace to set the refresh rate. Anyway, after a
reboot, same result so far
On Tuesday 22 February 2005 10:08 pm, [EMAIL PROTECTED] wrote:
> Mark Creamer <[EMAIL PROTEC
"TVOverScan" #
#Option "IgnoreDisplayDevices" #
#Option "MultisampleCompatibility" # []
#Option "RegistryDwords" #
#Option "RegistryBinary" #
#Option "NoPowerConnectorCheck" # []
#Option "AllowDFPStereo" # []
#Option "XvMCUsesTextures"# []
#Option "HorizSync" #
#Option "VertRefresh" #
#Option "AllowGLXWithComposite" # []
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor"Monitor0"
SubSection "Display"
Depth 24
Modes "1600x1200"
EndSubSection
EndSection
When I run glxinfo | grep direct, it returns: error: couldn't find RGB GLX
visual.
Thanks for any help you can provide!
--
Mark Creamer
--
gentoo-amd64@gentoo.org mailing list
ugh. Am I to use that and rename it?
>
> Xorg -configure
--
Mark Creamer
--
gentoo-amd64@gentoo.org mailing list
:
> You have emerged xorg-x11 already, right? Should be there if you have
> Also, you'll need nvidia-kernel too, that gives you the actualy kernel
> module
>
> On Sun, 20 Feb 2005 14:21:02 -0500, Mark Creamer <[EMAIL PROTECTED]>
wrote:
> > I have emerged
don't know which one to edit (I don't know whether my
system uses XFree86 or Xorg). What should I do next? Thanks
--
Mark Creamer
--
gentoo-amd64@gentoo.org mailing list
that worked. Thanks guys!
On Saturday 19 February 2005 10:56 pm, Drew Kirkpatrick wrote:
> try mozilla-firefox-bin
>
> On Sat, 19 Feb 2005 22:50:45 -0500, Mark Creamer <[EMAIL PROTECTED]>
wrote:
> > That returns:
> >
> > emerge: there are no ebuilds to satisfy &
That returns:
emerge: there are no ebuilds to satisfy "firefox-bin".
On Saturday 19 February 2005 10:09 pm, LeMoyne IV wrote:
> emerge firefox-bin
>
> Mark Creamer wrote:
> >Is it possible to emerge 32-bit firefox on my amd64 gentoo install? I'd
> > li
Is it possible to emerge 32-bit firefox on my amd64 gentoo install? I'd like
to be able to use flash and other content that doesn't work on the 64 bit
version. Thanks!
--
Mark
--
gentoo-amd64@gentoo.org mailing list
24 matches
Mail list logo
