071031 Philip Webb wrote:
> 071030 James Ausmus wrote:
>> the media-libs/mesa-7.0.1 works fine
>> *IF* you apply the attached patch (either hack the ebuild
>> or CTRL-Z immediately after emerge gets done unpacking the source).
>> I had the same problem you did, did the Googling, found the patch
>>
071031 Philip Webb wrote:
> Meanwhile, what I believed to be a small irritant is proving a show-stopper.
> Leaving aside DRI, the display from the new machine spills off the screen:
See previous msg for full horror story, but I did check the DPI :
both machines show 99x98 in answer to 'xdpyinfo'.
Philip Webb wrote:
> I did try unpacking the MesaLibs distfile, patching & repacking,
> but of course Portage objected that the file size was incorrect !
> <>
>
> Any advice here too wb very welcome.
>
>
You may be able to use the --digest feature so it doesn't check the
tarball before using it
071030 James Ausmus wrote:
> On 10/30/07, Benno Schulenberg <[EMAIL PROTECTED]> wrote:
>> build the Mesa modules from git, the 1.2.2 and 1.4 part:
>> http://dri.freedesktop.org/wiki/Building
>> These three lines were added to i915/intel_context.h since 7.0.1:
>> #define PCI_CHIP_G33_G
On 10/30/07, Benno Schulenberg <[EMAIL PROTECTED]> wrote:
> Philip Webb wrote:
> > The kernel is 2.6.22-r8 : I will try 2.6.23 tomorrow.
>
> No need, sorry, I was pointing you in the wrong direction. Kernel
> 2.6.22 already knows about 29c2 for i915.
>
> > I checked the wiki paragraph & the subdir
Philip Webb wrote:
> The kernel is 2.6.22-r8 : I will try 2.6.23 tomorrow.
No need, sorry, I was pointing you in the wrong direction. Kernel
2.6.22 already knows about 29c2 for i915.
> I checked the wiki paragraph & the subdir it refers to
> & the modules are already built & 'lsmod' shows them
071030 Benno Schulenberg wrote:
> What kernel version are you running? Try updating to the most recent.
> If then you still get "unrecognised deviceID 29c2",
> build the kernel modules from source (just the 1.7 DRM part):
> http://dri.freedesktop.org/wiki/Building
The kernel is 2.6.22-r8 : I w
Philip Webb wrote:
> I updated to the latest versions 7.0.1 7.0.1 2.1.1 & rebooted
> & there is no change: X crashes as soon as 'glxinfo' starts
> with the same error message "unrecognised deviceID 29c2"
> while using /usr/lib64/dri/i915_dri.so .
What kernel version are you running? Try upda
071029 Benno Schulenberg wrote:
> you need media-libs/mesa; mesa-progs is just glxinfo/glxgears.
>> 'xf86-video-i810-2.1.0' ( 2.1.1 is in testing (~)).
> Get the newest one, as there's much development in the intel driver.
I was using 'mesa' + 'mesa-progs' (read/write error by me).
I updated to
Philip Webb wrote:
> 071029 Benno Schulenberg wrote:
> > What versions of Mesa and xf86-video-i810 are you running?
>
> 'mesa-progs-6.5.2' (latest available).
Get the one from testing, 7.0.1. But what you need is
media-libs/mesa; mesa-progs is just glxinfo/glxgears.
> 'xf86-video-i810-2.1.0
071029 Benno Schulenberg wrote:
> Philip Webb wrote:
>> Unrecognised deviceID 29c2
>> backtrace ...
>> ... /usr/lib64/dri/i915_dri.so ... (provided by pkg 'mesa')
> What versions of Mesa and xf86-video-i810 are you running?
'mesa-progs-6.5.2' (latest available).
'xf86-video-i810-2.1.0'
Philip Webb wrote:
> Unrecognised deviceID 29c2
> backtrace ...
> ... /usr/lib64/dri/i915_dri.so ... (provided by pkg 'mesa')
What versions of Mesa and xf86-video-i810 are you running? And what
is in the Section "Device" of your /etc/X11/xorg.conf?
Benno
--
[EMAIL PROTECTED] mailing lis
071027 Philip Webb wrote:
> X starts with no errors in the log, but 'glxgears' & 'glxinfo' crash X.
> The processor is an Intel G33 using drivers 'i810' & 'i915' ;
> kernel 2.6.22-r8 ; 64-bit system .
After sleeping on the problem & reading Forum discussion re 'x11-drm',
I've tried a few more thin
13 matches
Mail list logo
