Thanks for the replies.
No, I'm not going into VM to muck around there, home mortage, college loans to
pay...can afford to loose job.
Well when OP1 (using PROP) is in hold mode then command submitted to the
Operator from else where won't get executed until the hold is cleared. Get a
On OP1: CP TERM HOLD OFF (turns of HOLDING and just uses ...MORE)
And: CP TERM MORE 0 0 if you want the screen to clear immediately
without a ...MORE
Scott Rohling
On Mon, Jul 21, 2008 at 9:09 AM, Howard Rifkind [EMAIL PROTECTED]
wrote:
Thanks for the replies.
No, I'm not going into
On Mon, Jul 21, 2008 at 5:09 PM, Howard Rifkind [EMAIL PROTECTED] wrote:
Well when OP1 (using PROP) is in hold mode then command submitted to the
Operator from else where won't get executed until the hold is cleared. Get
a message back saying something like there is console input waiting and
Oh, but now you shed some extra light. You write:
something like there is console input waiting
This is not really related to TERM HOLD OFF or MORE x y
It means someone sent a console command to the user, and the user
didn't read it yet. In case of PROP it means CMS didn't read it yet,
often a
On Monday, 07/21/2008 at 11:11 EDT, Howard Rifkind [EMAIL PROTECTED]
wrote:
Thanks for the replies.
No, I'm not going into VM to muck around there, home mortage, college
loans to
pay...can afford to loose job.
Well when OP1 (using PROP) is in hold mode then command submitted to the
On Monday, 07/21/2008 at 11:35 EDT, Kris Buelens [EMAIL PROTECTED]
wrote:
Oh, but now you shed some extra light. You write:
something like there is console input waiting
This is not really related to TERM HOLD OFF or MORE x y
It means someone sent a console command to the user, and the
I know Alan (as you probably know), but I wanted to keep things simple.
Now my turn to throw stones (or pebbles)
- ain't it about time CP SLEEP allows shorter periods than 1 second?
(PIPE DELAY can be used to sleep shorter)
- CP SEND uses the same RC to signal almost all problems it can get
- So
On Monday, 07/21/2008 at 12:36 EDT, Kris Buelens [EMAIL PROTECTED]
wrote:
I know Alan (as you probably know), but I wanted to keep things simple.
Now my turn to throw stones (or pebbles)
- ain't it about time CP SLEEP allows shorter periods than 1 second?
(PIPE DELAY can be used to sleep
Though we already concluded the OP was on the wrong track, it is not
hard to write a pipeline stage that retries the CP SEND command a few
times with minimal delay when the recipient is in CF. But since you
don't get the output, it is not really suitable for reliable
communication.
Rob
Howard,
You can look at the RDEVSFLG field in the RDEV block.
It is pointed to via VMDRTEM field in the user's VMDBK.
See http://www.vm.ibm.com/pubs/cp530/VMDBK.HTML and
http://www.vm.ibm.com/pubs/cp530/RDEV.HTML
Ronald van der Laan
On Friday, 07/18/2008 at 03:48 EDT, Howard Rifkind [EMAIL PROTECTED]
wrote:
Does anyone know of a way to tell if a users console is being held
'HOLDING' at
the bottom right of the screen.
I would like to find this out from an exec procedure.
The general answer is no unless you are
11 matches
Mail list logo