xinetd is a server which starts other server processes, such as
pserver, when it receives a request for them. So you might not see
pserver all the time.
I assume that you cannot connect using pserver from a remote machine?
I think that if you post your xinetd script, and also tell us how you
pserver in inetd:
Consulente1:/etc/apt# grep cvs /etc/inetd.conf
# cvs pserver
cvspserver stream tcp nowait root/usr/bin/cvs cvs
--allow-root=/usr/local/cvspserver
And it isn't listed in netstat:
Consulente1:/etc/apt# netstat -lnp|grep cvs
Consulente1:/etc/apt#
But it works
I think i did all the needed to set up cvs pserver following the cvs howto in
https://ccvs.cvshome.org/fom//cache/124.html,
, but it does not work
//
I do make sure
Solaris 10 has a new service management facility (smf)
as a replacement for inetd.conf.
Does anyone have a ready-to-go smf configuration that
can be used to run cvs pserver w/o using inetd.conf on
Solaris 10 ?
___
Info-cvs mailing list
Info-cvs@gnu.org
Never mind, inetconv came to the rescue. Just converted
the inetd.conf entries to SMF xml file and all is well.
Rachel Burns wrote:
Solaris 10 has a new service management facility (smf)
as a replacement for inetd.conf.
Does anyone have a ready-to-go smf configuration that
can be used to run cvs
On Thu, Feb 17, 2005 at 02:44:38PM -0800, alex wrote:
I would say this looks like a TCP wrapper (/etc/hosts.allow,
/etc/hosts.deny, hosts_access(5), hosts_options(5)).
Maybe but where does that comes from and how can I change it. My hosts
file are not used ( I am using xinetd not inetd )
alex writes:
telnet localhost 2401
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
That looks like some kind of firewall software rejecting the connection.
-Larry Jones
OK, there IS a middle ground, but it's
alex wrote:
server_args = -f --allow-root=/usr/local/cvsroot server
should be
server_args = -f --allow-root=/usr/local/cvsroot pserver
You need pserver not server
I made a typo. server_args is:
server_args = -f --allow-root=/usr/local/cvsroot pserver
the result is the same.
On Thu, Feb 17, 2005 at 10:02:33AM -0500, Larry Jones wrote:
telnet localhost 2401
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
That looks like some kind of firewall software rejecting the connection.
You may have to put the line 'disable = no'[1] in /etc/xinetd.d/cvspserver.
have you issued `service xinetd restart`, since setting up
/etc/xinetd.d/cvspserver?
I tried but with no change:
[EMAIL PROTECTED] ~]# cat /etc/xinetd.d/cvspserver
service cvspserver
{
disable = no
socket_type = stream
That looks like some kind of firewall software rejecting the connection.
I would say this looks like a TCP wrapper (/etc/hosts.allow,
/etc/hosts.deny, hosts_access(5), hosts_options(5)).
Maybe but where does that comes from and how can I change it. My hosts
file are not used ( I am using
. I don't have it running but
could FC3's SELinux be tripping you up if you have it running in
strict mode?
# telnet localhost 2401
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
cvs [pserver aborted]: bad auth protocol start:
Connection closed
Hi all,
I am using fedora core 3,
Concurrent Versions System (CVS) 1.11.17 (client/server)
xinetd Version 2.3.13 libwrap loadavg
and I am trying to set up a CVS pserver on my machine ( without any
security in mind at the moment):
my cvspserver file
The line in cvspserver service definition:
server_args = -f --allow-root=/usr/local/cvsroot server
should be
server_args = -f --allow-root=/usr/local/cvsroot pserver
You need pserver not server
Regards,
Rahul Bhargava
CTO, WANdisco
http://www.wandisco.com/cvs
server_args = -f --allow-root=/usr/local/cvsroot server
should be
server_args = -f --allow-root=/usr/local/cvsroot pserver
You need pserver not server
I made a typo. server_args is:
server_args = -f --allow-root=/usr/local/cvsroot pserver
the result is the same.
telnet localhost 2401
the repository with init
3. added following line to the /etc/xinetd.conf file so xinetd listens to port
2401 and knows to run command cvs pserver when it receives a connection:
{
port= 2401
socket_type = stream
protocol= tcp
-Original Message-
From: [EMAIL PROTECTED] [mailto:info-cvs-
[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: mardi 18 janvier 2005 23:19
[snip]
3. added following line to the /etc/xinetd.conf file so xinetd listens to
port
2401 and knows to run command cvs pserver when
I banged my head on the wall on this connection refused problem. The
default gentoo emerge throws an xinet.d/cvspserver config that just
needs:
only_from = 192.168.1.0
Which represents my local subnet. Without that, I could only telnet to
localhost on 2401. It was strange and
I'm trying to get some data on who has been accessing a pserver cvs
repository. Is there any default log file that contains this information
or at least an option I can set in inetd? Also, are there any web
scripts that can publish thing information?
Thanks in advance.
--
cvs pserver access statistics on a
website?
Thanks in advance.
--
/
Alex Valentine [EMAIL PROTECTED]
aim: asv108vv jabber: [EMAIL PROTECTED]
/
signature.asc
Description: This is a digitally signed message part
Hi all,
My system administor just set up a cvs pserver on a linux machine. The
configuration for x.inetd.d is:
service cvspserver
{
# disable = no
port = 2401
socket_type = stream
protocol = tcp
wait = no
user = root
passenv = PATH
server = /usr/bin/cvs
server_args
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hon Seng Phuah [EMAIL PROTECTED] writes:
My system administor just set up a cvs pserver on a linux machine. The
configuration for x.inetd.d is:
service cvspserver
{
# disable = no
port = 2401
socket_type = stream
protocol
Mark D. Baushke [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED]...
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hon Seng Phuah [EMAIL PROTECTED] writes:
My system administor just set up a cvs pserver on a linux machine. The
configuration for x.inetd.d is:
service
will have to check with my system administrator. If the root has the
file permission, what can the possible causes?
If root has the ability to read that file, then the error message from
cvs:
cvs [login aborted]: unrecognized auth response from pglc8004: cvs
pserver: cannot open /pgfs3/asic3/users
Mark D. Baushke writes:
If the directory is NFS mounted, it is possible that root does not have
permissions to one or more of the intermediate directories leading to
the config file.
It's also asking for trouble -- essentially every reported instance of
repository corruption as been caused
Following the recommendations on
http://mia.ece.uic.edu/~papers/volans/setUpCVS.html
I set up a cvs environment on a RedHat9 Linux box (cvs-1.11.2-10).
But starting the cvs server either with
cvs -f --allow-root=/space/cvs pserver
or over
xinetd
and then trying to connect from a client via
the recommendations on
http://mia.ece.uic.edu/~papers/volans/setUpCVS.html
I set up a cvs environment on a RedHat9 Linux box (cvs-1.11.2-10).
But starting the cvs server either with
cvs -f --allow-root=/space/cvs pserver
or over
xinetd
and then trying to connect from a client via
Karl Lehnberger writes:
But starting the cvs server either with
cvs -f --allow-root=/space/cvs pserver
You can't do that -- CVS doesn't run as a stand-alone server, it *must*
run under a superserver like inetd or xinetd.
or over
xinetd
Then your xinetd configuration likely wasn't
--allow-root=/space/cvs pserver
This will not work as cvs does not itself bind to a particular port, but
assumes that stdin, stdout and stderr will be connected to the
appropriate place.
or over
xinetd
This should work and should cause xinetd to be listening for connections
to port 2401. When
On Thu, 2004-07-08 at 10:53, Mark D. Baushke wrote:
The cvs executable itself is not intended to be a long-running daemon.
That's something I've wondered about... since cvs is run under xinetd,
the 500 KB binary gets loaded into memory each time a command comes in.
Has anyone given a shot at
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tom Copeland [EMAIL PROTECTED] writes:
On Thu, 2004-07-08 at 10:53, Mark D. Baushke wrote:
The cvs executable itself is not intended to be a long-running daemon.
That's something I've wondered about... since cvs is run under xinetd,
the 500 KB
Tom Copeland writes:
That's something I've wondered about... since cvs is run under xinetd,
the 500 KB binary gets loaded into memory each time a command comes in.
Most modern systems keep the text in virtual memory until something else
needs the memory, but if you're concerned, you can
On Thu, 2004-07-08 at 13:48, Larry Jones wrote:
Has anyone given a shot at writing some front-end code to let cvs stay
in memory and serve up requests?
That could be a challenge
Yup, sounds like it :-). That's cool, just wondered about it...
Thanks,
Tom
It seems the formating changes in CVS has affected cruise control's
operation. Has anyone tickered with the source of the lastest cruise
control and willing to share the diffs?
--
==//
Mark O. email2mark at gmail dot com
___
Info-cvs mailing list
Hi !
Does anyone knows how to configure a pserver CVS repository and to use
pam_ldap for athentication ?
Maybe a tutorial available ?
Thx !
___
Info-cvs mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/info-cvs
] On Behalf Of Dorin Ciobanu
Sent: Tuesday, March 30, 2004 4:29 AM
To: [EMAIL PROTECTED]
Subject: cvs (pserver) and LDAP ?
Hi !
Does anyone knows how to configure a pserver CVS repository and to use
pam_ldap for athentication ?
Maybe a tutorial available ?
Thx
(EST)
Subject: Re: CVS pserver login problem
Adam Vainder writes:
and tried the telnet into port 2401 debug that they suggested.
Unfortunately (well for this case), I got the bad auth protocol
message, indicating that CVS is working correctly.
Did you telnet from the remote machine
Adam Vainder writes:
and tried the telnet into port 2401 debug that they suggested.
Unfortunately (well for this case), I got the bad auth protocol
message, indicating that CVS is working correctly.
Did you telnet from the remote machine you're having problems with? The
problem is almost
Hi,
I hope this is the right place to send this. If not, please let me know
where to send/post it.
I've been trying to figure this out on my own for about a month, and just
cant take it anymore. Hopefully one of you has seen this before and knows
the answer.
I set up a pserver on a Red Hat
Check this out:
http://www.cvshome.org/docs/manual/cvs-1.11.10/cvs_21.html#SEC184
-- Original Message --
Date: Fri, 30 Jan 2004 16:05:03 -0500
From: Adam Vainder [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: CVS pserver login problem
Hi,
I hope this is the right place to send
nd
*shrug*.
Any other ideas in the meantime?
Sorry to bug you guys with this, Ive been trying to figure
it out solo for quite some time.
Thanks again,
Adam-Original Message-From: "Peter Connolly"
[EMAIL PROTECTED]To: "Adam Vainder"
[EMAIL PROTECTED], [EMAIL PROTECTED]Da
AMTo: 'Diego Ribeiro de Andrade'; 'INFO CVS'Subject: RE:
CVS Pserver with multiple repositories?
Hi!
What you require is to define the server args string
as:
server_args = -f --allow-root=/cvs/rep/casnav --allow-root=/cvs/repo/proj2 --allow-root=/cvs/repo/proj2
pserver
PROTECTED], 'INFO
CVS' [EMAIL PROTECTED]
Assunto: RE: CVS Pserver with multiple repositories?
Data: 23/12/03 08:01
Message
Hi
nbsp;
Will
this work fine on the same port 2401.
or CVS
needs to choose different port numbers for the other
(mutilple)nbsp;repositories ...
nbsp
'; 'INFO CVS'Subject: RE: CVS Pserver with multiple
repositories?
Hi
Will
this work fine on the same port 2401.
or
CVS needs to choose different port numbers for the other
(mutilple)repositories ...
Regards
Gurpreet S
-Original Message-From: Gagneet Singh
I have implemented a CVS Pserver in a Red
Hat Machine to serve to 3 projects. I installed CVS 1.12.5 on a RED HAT 9
Machine. To make the service RUNI edited cvspserver arquive in
/etc/xinetd.d... It looks like this...
service cvspserver
{
port = 2401
disable = no
socket_type = stream
this helps.
Gagneet
PS: Your English is good so don't worry about it..
:-))
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Diego
Ribeiro de AndradeSent: Monday, 22 December, 2003 21:08
PMTo: INFO CVSSubject: CVS Pserver with multiple
to 'cvs pserver' to do this? I notice when you type:
cvs ---help pserver
you get:
Usage: cvs pserver
Normally invoked by a cvs client on a remote machine.
ie: its not being that helpful...
Ed
___
Info-cvs mailing list
[EMAIL PROTECTED]
http
From the Cederqvist, section 2.9.3.1 Setting up the server for
password authentication:
Unfortunately, many versions of inetd have very small limits on the
number of arguments and/or the total length of the command. The usual
solution to this problem is to have inetd run a shell script which then
PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, December 23, 2002 5:07 PM
Subject: Example of invoking cvs pserver from shell script
From the Cederqvist, section 2.9.3.1 Setting up the server for
password authentication:
Unfortunately, many versions of inetd have very small limits on the
number
-Original Message-
From: Shishir Singhai [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 17, 2002 2:03 AM
To: [EMAIL PROTECTED]
Subject: RE: i could not connect the cvs pserver from cvs client on win32
Hi
Have u setup password file and on which OS u run pserver.
regards
Shishir
think my cvs pserver is mistake.how could i
do? Thanks.
http://www.cvshome.org/docs/manual/cvs_21.html#SEC184
-Larry Jones
This game lends itself to certain abuses. -- Calvin
___
Info-cvs mailing list
[EMAIL PROTECTED]
http://mail.gnu.org
i have setup a cvs server,then i try connect the
server from a win32 machine.but failed.the error
message is [login aborted]:reading from
server:connection reset by peer or [login
aborted]:end of file from server,consult above message
if any. i think my cvs pserver is mistake.how could i
do
Hello:
Did something change in the way the shadow passwords
are set-up under RedHat 8.0 from RedHat 7.3?
I am trying to create a password file for my repository
on a new server running RedHat 8.0. When I vi the
/etc/shadow file, my password looks like it has some
non-printing characters in it.
Norberto Meijome wrote:
Hi Irfan,
can you tell us some more information? What is the error that you
receive?
is inetd really listening on that port? have you restarted/kill -1
inetd after changing the conf file?
Beto
irfan ali wrote:
Hello,
I am trying to connect to my remote CVS
Hello,
I am trying to connect to my remote CVS Repository on my linux machine under
/home/cvs/repository using winCVS which is setup on my windows machine. I have taken
care of /etc/services and /etc/inetd.conf files. I have also created passwd file under
/home/cvs/repository/CVSROOT folder.
Hi Irfan,
can you tell us some more information? What is the error that you receive?
is inetd really listening on that port? have you restarted/kill -1
inetd after changing the conf file?
Beto
irfan ali wrote:
Hello,
I am trying to connect to my remote CVS Repository on my linux machine
no.
i'm afraid i had a typo (in my email).
cvs -d :pserver:www.symbion.at:2401/home login
or
cvs -d :pserver:www.symbion.at:/home login
should be the right syntax.
anyway, in the first case - with port - there must not be a second :,
otherwise i get
lectrix@symbion home $ cvs
: lectrix
To: [EMAIL PROTECTED]
Sent: 5/25/2002 3:40 AM
Subject: cvs pserver login problem
hi!
i am reposting this since i forgot to fill in the subject field last
time,
sorry!
keep hoping someone can give me a hint on this:
i am experiencing a problem with setting up cvs pserver. i followed
hi!
i am reposting this since i forgot to fill in the subject field last time,
sorry!
keep hoping someone can give me a hint on this:
i am experiencing a problem with setting up cvs pserver. i followed the
instruction in the manual and configured xinetd so that it starts cvs
pserver on port
hi!
i am experiencing a problem with setting up cvs pserver. i followed the
instruction in the manual and configured xinetd so that it starts cvs
pserver on port 2401 successfully ( i tested with telnet). but when i am
trying to connect, syslog says: www xinetd[26206]: START: cvspserver
pid
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I set up my little pserver in a chroot environment (accoring to
http://www.unixtools.org/cvs/server-how-to.html) and added a code
repository and imported a module. But for some reasons I can't check
it out lateron. I have almost no experience with
Hi All,
I
have tried to set up cvs pserver.
In my repository , in the cvsroot directory
I have created a passwd file to which i have added the following
line
menuka: def
I am getting the following error message when i try to login to cvs
server.
cvs login :authorization failed: server
menuka writes:
In my repository , in the cvsroot directory
I have created a passwd file to which i have added the following line
menuka: def
I don't know what you think you're doing, but that is not correct
syntax. You should have the CVS user name, a colon, then that user's
encrypted
Neil Aggarwal writes:
vi /etc/xinetd.d/cvs and added these lines:
service cvs
That should probably be cvspserver rather than cvs.
{
port = 2401
If cvspserver is defined as port 2401 in /etc/services, which it
should be, you don't need that line (although it doesn't hurt).
I am trying to set-up a CVS pserver on my RedHat 7.1 development machine.
I tried reading the CVS book at http://cvsbook.red-bean.com, but it
does not cover xinetd, so I tried to adapt it myself.
Here is what I did as root:
cvs -d /usr/local/cvsroot init
/usr/sbin/useradd cvs
cd /usr/local
Something to do with cvs server running as root, inheriting the HOME
environment variable. Create a user named cvs and run the server under
that user. Or try this as root:
unset HOME
/etc/rc.d/init.d/inet restart
Regards from Olav!
Neil Aggarwal wrote:
I am trying to set-up a CVS pserver
Hello,
I usually use Mandrake 8 and pserver works peacefully there. At work, I
need to install RH 7.2 for this and it is driving me nuts.
- stock CVS rpm
- pserver running from xinetd
When you login it actually gives an error if you give wrong userids...
But, if the userid is valid, you can
I've seen a number of threads about pserver authentication failure
for no obvious reason, and I'm getting the same errors.
[jhg@janus jhg]$ cvs -d :pserver:jhg@localhost:/home/cvs/repository login
Logging in to :pserver:jhg@localhost:2401/home/cvs/repository
CVS password:
cvs login:
James Garrison writes:
Here are some example lines from /var/log/secure (SYSLOG/AUTHPRIV)
for previously failed login attempts.
[...]
The string after the / which I assume is supposed to be the obfuscated
password, doesn't match what's in the protocol stream:
It's supposed to be the
Sven Dowideit wrote:
on solaris when i do a login with 1.11p1 it failes with the error failed to
read /home/sven/.cvspass
when i create that file everything works fine.
(i kinda expect to be told that its fixed in the dev version :)
Yeah. Larry fixed that about a month ago, but thanks!
Sven Dowideit wrote:
Heya Larry,
i have had another stab at it, and I still cannot build a pserver cvs that
works.
./configure --without-gssapi still leaves gssapi libs in the Makefile
and when i hack the configure script to leave off all of the gssapi stuff, I
get an exe that
:48 PM
To: Sven Dowideit
Cc: Larry Jones; [EMAIL PROTECTED]
Subject: Re: Problems running cvs pserver
Sven Dowideit wrote:
Heya Larry,
i have had another stab at it, and I still cannot build
a pserver cvs that
works.
./configure --without-gssapi still leaves gssapi libs
: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Derek R. Price
Sent: Tuesday, June 05, 2001 11:48 PM
To: Sven Dowideit
Cc: Larry Jones; [EMAIL PROTECTED]
Subject: Re: Problems running cvs pserver
Sven Dowideit wrote:
Heya Larry,
i have had another stab at it, and I still
]]On Behalf Of
Sven Dowideit
Sent: Wednesday, May 09, 2001 1:11 PM
To: Larry Jones
Cc: [EMAIL PROTECTED]
Subject: RE: Problems running cvs pserver
I have this problem with cvs-1.10 (the one we are currently using in local
mode only) and with cvs 1.11p1 (that i am using as a comparison)
I
Sir,
I am using RedHat Linux 7.0 , and i want to configure pserver, so that
users can access repository remotely.
I have made a file in directory /etc/xinetd.d in the name cvspserver,
for entering details of server, but i am still not able to connect the
server.
Can you just guide me what should
Amit Bakhru writes:
I have made a file in directory /etc/xinetd.d in the name cvspserver,
for entering details of server, but i am still not able to connect the
server.
Can you just guide me what should be the contents of this file
cvspserver.OR Where can i get documentation for
immediately with the
Connected to localhost.
Escape character is '^]'.
cvs pserver: No CVSROOT specified! Please use the `-d' option
cvs [pserver aborted]: or set the CVSROOT environment variable.
Connection closed by foreign host.
That indicates that the CVS you're trying to use as a server
Sven Dowideit writes:
i run
./configure --disable-encryption --prefix=/opt/cvs --with-gssapi=no
and then server.c failes to build because it tries to include krb5.h
What version of CVS? The Kerberos stuff is a mess, but it's getting
better and better as time goes on.
this results in an
: Problems running cvs pserver
Sven Dowideit writes:
i run
./configure --disable-encryption --prefix=/opt/cvs --with-gssapi=no
and then server.c failes to build because it tries to include krb5.h
What version of CVS? The Kerberos stuff is a mess, but it's getting
better and better as time
'
CVSClient.READLine: 'cvs pserver: No CVSROOT specified! Please use the
`-d' option'
AUTHENTICATE: REPLY: 'cvs pserver: No CVSROOT specified! Please use the
`-d' option'
I get the same response if I telnet to the port i.e. The connection
terminates immediately with the
Connected to localhost.
Escape
[EMAIL PROTECTED] writes:
I get the same response if I telnet to the port i.e. The connection
terminates immediately with the
Connected to localhost.
Escape character is '^]'.
cvs pserver: No CVSROOT specified! Please use the `-d' option
cvs [pserver aborted]: or set the CVSROOT
. Using
truss we can see that the process is just reading the input characters and
then sleeping.
Does that include a newline? If you telnet to the port and hit return,
you should get:
cvs [pserver aborted]: bad auth protocol start:
If you don't, there's something wrong with your CVS
I can't find pserver anywhere, where can I get a copy of pserver?
Thanks,
Steve Flatbush
___
Info-cvs mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/info-cvs
Steve Flatbush wrote:
I can't find pserver anywhere, where can I get a copy of pserver?
pserver is not a separate program. It is simply a command specified
on the cvs command line (actually in inetd.conf but why split hairs?).
--
Stephen Rasku E-mail: [EMAIL PROTECTED]
Hi,
At work I've installed cvs and we now have a cvs repository which all
developers access through the pserver. All accounts are mapped to the same
userid (so the CVSROOT/passwd file is user:passwd:cvsaccount for every
user).
When I use the loginfo method to automatically send mail about the
Hello,
Do the developers also have UNIX accounts? Then don't use the CVSROOT/passwd
file, I don't think there's any really good reason to use it.
It's easier to set up a phony shell that doesn't allow logins and use
the UNIX user account system if you don't want people logging into the
box.
ectly, so I use port forwarding via
ssh. So if I want to access two `cvs pserver' repositories, I have to
set up port forwarding with two different local ports, right? I guess
that means I need to specify the port on the remote host when doing
cvs -d :pserver:user@host:/path/to/repository co
I'm new to this and am attempting to set up a
pserver on a linux box which will service multiple windows machines running
wincvs.
I have thus far installed cvs and created a
repository. I'm not sure how to actually get pserver listening on the port
I'm using. Any help on what command line
Chris Niekel writes:
When I use the loginfo method to automatically send mail about the commits,
the "Author" is always set to 'cvsaccount'. Is there any way to make this
the 'user' entry?
I'm just using an example log.pl script, but I printed the environment
settings, and that also
I can't access the outside directly, so I use port forwarding via
ssh. So if I want to access two `cvs pserver' repositories, I have to
set up port forwarding with two different local ports, right? I guess
that means I need to specify the port on the remote host when doing
cvs -d :pserver:user
-Original Message-
From: Larry Jones [mailto:[EMAIL PROTECTED]]
Joshua Davis writes:
I tried *not* setting HOME, but it didn't work on RH 7.0. The
HOME setting
seems to fix this problem (with RH 7.0 xinetd). Unless this
behavior of RH
7.0 has been fixed. If that's the
Ginger Ellsworth writes:
$ cvs -d :pserver:[EMAIL PROTECTED]:/cvs login
(Logging in to [EMAIL PROTECTED])
CVS password:
cvs [login aborted]: connect to 192.168.1.134:2401 failed: Connection
refused
"Connection refused" means that the server machine isn't listening for
connections on the
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Larry Jones
Ginger Ellsworth writes:
$ cvs -d :pserver:[EMAIL PROTECTED]:/cvs login
(Logging in to [EMAIL PROTECTED])
CVS password:
cvs [login aborted]: connect to 192.168.1.134:2401 failed:
Joshua Davis writes:
I tried *not* setting HOME, but it didn't work on RH 7.0. The HOME setting
seems to fix this problem (with RH 7.0 xinetd). Unless this behavior of RH
7.0 has been fixed. If that's the case, then 'nevermind'. :)
What do you mean by "didn't work"? It may well be that
= cvsusers
env = HOME=/cvs
passenv =
server = /usr/bin/cvs
server_args = -f --allow-root=/cvs pserver
log_on_success += DURATION USERID
log_on_failure += USERID
}
and I have rebooted the machine to re
On Thu, Mar 01, 2001 at 04:22:26PM -, Darren Young wrote:
I read a thread from last year that mentioned the same type of issue
I am looking to resolve, although I did not find any appropriate
answers. I am looking to set up a cvs pserver, however it will be
located on my hosting
to allow you to specify the port
number on the command line. Something like setting CVSROOT env var to
:pserver:user@host(port):/path_to_cvs_repos
Also I didn't think that pserver listened on a port for you. It was designed
so that inetd would listen on the port and spawn the cvs pserver command
when
The current dev version does this. The syntax is
:pserver:[user@]host[:port]/path_to_cvs_repos
Also I didn't think that pserver listened on a port for you. It was designed
so that inetd would listen on the port and spawn the cvs pserver command
when a connection was made, after tying the socket
On Thu, Mar 01, 2001 at 04:22:26PM -, Darren Young wrote:
Now, what I would like to do is something like this:
$HOME/bin/cvs --allow-root=$HOME/cvsroot -T$HOME/tmp -f pserver
It seems to start fine, although if I touch my keyboard it stops. In
a second shell session, netstat -na
In a message dated 1/26/01 3:52:56 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
I have, but I think these occur when the client doesn't close down the
connection to the server properly. Sometimes I have pserver process
that hangs around for a couple of days, and I (or someone else)
1 - 100 of 133 matches
Mail list logo