CTED]>
Reply-To: [EMAIL PROTECTED]
Organization: mds resource
To: LEAF <[EMAIL PROTECTED]>
Subject: Re: [leaf-user] ipsec connect to this?
Correct me if I am wrong; but, isn't transport mode solely for
host-to-host vpn's?
Everything seems to be OK in auth.log and ipsec look a
Correct me if I am wrong; but, isn't transport mode solely for
host-to-host vpn's?
Everything seems to be OK in auth.log and ipsec look appears OK, when I
use tunnel mode -- however, we cannot ping nor telnet nor ftp to the
other side. tcpdump shows outgoing requests; but, nothing comes back.
U
--On Wednesday, November 06, 2002 3:38 PM -0600 Joey Officer
<[EMAIL PROTECTED]> wrote:
If you are questioning can IPSec be setup with DCD sure, you can use a
floppy, and with my limited experience, it looks like there is enough
information here to setup your ipsec.conf file, but I don't see a
Upon further reading, I think the following would be adequate for
implementing this ipsec setup, but I'm not sure about the opposite side.
conn office # we'll assume left is DCD
left=public.ip.address.
leftsubnet=192.168.1.0/24
leftnexthop=pulic.ip.address.1
leftrs
If you are questioning can IPSec be setup with DCD sure, you can use a
floppy, and with my limited experience, it looks like there is enough
information here to setup your ipsec.conf file, but I don't see a key...and
the destination network should be the private range I assume?
Joey
-Origina
