@googlegroups.com] On Behalf Of Richard Ellis
Sent: Tuesday, 11 April 2017 5:24 PM
To: Legacy Ornamental Mills
Subject: Re: U.K. Legacys
Hi Bill
I have placed Wanted adds in two separate wood working forums for info about
the Revo, that I would like to see or buy, Will see what response I get!!
Richard
On
> [mailto:legacy-ornamental-mills@googlegroups.com ] **On
> Behalf Of *Michael Kratky
> *Sent:* Monday, 10 April 2017 11:38 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* RE: U.K. Legacys
>
>
>
> Interesting as the “woodturning industry” is thriving worldwide;
Michael Kratky
Sent: Apr 10, 2017 8:27 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: U.K. Legacys
That is a fine looking LOM, that and all its accessories would work on most of their previous mills and my 1200, too bad Legacy customer service shot themselves in the foot by totally
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Michael Kratky
Sent: Monday, 10 April 2017 11:38 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: U.K. Legacys
Interesting as the “woodturning industry” is thriving worldwide; Legacy can’t
see the forest because the trees are in way
AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: U.K. Legacys
Back in the day. the rumor was that Legacy was going to stop making the manual
machines, I thought that, there is no way... They just got the product that
works very well, + all the new parts and template... There is no
From: "Michael Kratky"
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, April 10, 2017 8:27:51 AM
Subject: RE: U.K. Legacys
That is a fine looking LOM, that and all its accessories would work on most of
their previous mills and my 1200, too bad Legacy customer serv
@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Monday, April 10, 2017 3:58 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: U.K. Legacys
He revo mill http://www.legacywoodworking.com/revo.cfm
Bill
From: legacy-ornamental
I'll show another hidden link on our home site for the history of the
ornamental mills.
http://ornamentalmills.com/history/index.html
-Tim
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop rece
t;
> http://www.legacywoodworking.com/revo.cfm
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com ] *On Behalf Of *Bill
> Bulkeley
> *Sent:* Monday, 10 April 2017 5:58 PM
> *To:* legacy-orna...@googlegroups.com
> *Subj
Subject: RE: U.K. Legacys
He revo mill http://www.legacywoodworking.com/revo.cfm
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Monday, 10 April 2017 5:28 PM
To: Legacy Ornamental Mills
Subject: Re
He revo mill http://www.legacywoodworking.com/revo.cfm
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Monday, 10 April 2017 5:28 PM
To: Legacy Ornamental Mills
Subject: Re: U.K. Legacys
Bill
I
Monday, 10 April 2017 3:10 AM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: U.K. Legacys
>
>
>
> I have a LOM 900 Standard CNC. I used it a good bit when I first bought it
> but have not turned it on in several years. I could be talked out of it if
> the price w
@googlegroups.com] On Behalf Of Steve Jacobs
Sent: Monday, 10 April 2017 3:10 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: U.K. Legacys
I have a LOM 900 Standard CNC. I used it a good bit when I first bought it but
have not turned it on in several years. I could be talked out of it if the
I have a LOM 900 Standard CNC. I used it a good bit when I first bought it but
have not turned it on in several years. I could be talked out of it if the
price was reasonable. I also have a Revo but I want to keep it. When I retire
again I will need something to do and I think the Revo will fit
That is O.K. Roger,
I did not ask who they were, or their addresses . The matter as far as I
am concerned is closed.
They do say the 900 is able to be CNC'd
Regards
Richard
On Sunday, April 9, 2017 at 11:05:33 AM UTC+1, ITwoodwork wrote:
>
> Hi Richard
>
> I know the addresses and names of the
Hi Richard
I know the addresses and names of the people to whom I sold a Legacy. It is up
to them whether they wish to participate in this group.
Do not expect me to tell you where they are and whether they are exhibition
items, expensive toys or earning their keep. I enjoyed selling them, and
Roger
My main thoughts on the Woodchuck is the lack of attention to detail, When
the RHS bars were cut off, there was quite a lot of swarf left on the
inside of the bars, *It was still attached.* and very sharp
Although the previous owner did not remove it, or indeed notice it ,I did.
Mainly bec
You say your well pleased with the Woodchuck but critical of the materials
used in it's construction. I accept you may be critical and that is your right
however remember that design is properly approaching 30 years old and it was
Andy's original design and he was not copying or enhancing someo
Roger
When I joined up in the Forces, We were told not to discuss religion or
politics.
I am well pleased with the Woodchuck other than the materials that were
used in it's construction and the sloppy finish on some parts.
It is a simple bit of kit and does a good job as Mike has shown.
CNC is o.
Hi Richard
Now for the Good News, we all die and we have not a clue what happens after
that. Now that is my opinion but I respect others who think differently.
In the meantime I will settle for a good whisky but pass on the cigar as I gave
up smoking at 10 years of age after trying a sly smoke
Good old Winston,
Where is my cigar and whiskey, is that what he asked !??
I wonder if we may see a similar non cnc being built. Or something else in
the wood working line .
Look what you have started, all this coffin malarkey, Please Have some
sympathy for me as I have been a* great
m for months or years! I'm pleased to see that at least ONE person caught the "humor" of my reply to Roger.Have a Great week.Mac-Original Message-
From: Dexter Bland
Sent: Apr 5, 2017 5:12 PM
To: Legacy Ornamental Mills
Cc: mwfos...@earthlink.net
Subject: Re: U.K. Legacys
M
Mac,
I wondered if anyone else picked up on the dead coffin business comment.
Maybe cremation is getting more popular.
I was asked to build someone a coffin once for someone's grandmother that
was in bad health. Turned down the job due to the short amount of time they
gave to complete. I was u
Hi Richard
I also signed OSA and like wise in commerce I have signed similar documents but
where I receive Commercial in Confidence information it stays with me.
Only a couple of hours ago I was told something in Commercial in Confidence,
and in the last couple months other things have come alo
Roger
I know about the O.S.A.s (official secrets acts ) but as I, was also in
the R.A.F. This little bit of secrecy is taking it too far, by the way ,I
too served on a a couple of Signal units in Germany close to the East
German border. We also had the British army with us but no *red caps,* j
casional levity.)Blessings to all.Mac-Original Message-
From: Bawdsey64
Sent: Apr 5, 2017 5:50 AM
To: Richard Ellis , Mike Pung
Subject: Re: U.K. Legacys
Hi RichardThe answers to your questions are:-a. I think you and your Woodchuck are on your own.b. Nearly 100 Legacy Mills in UKc. Ho
The answer is no I have not used it and probably won't. But wait and see.
Roger & out!
Sent from TouchMail for Windows 10 [http://bit.ly/1PH8eIw]
From: Richard Ellis
Received: 05/04/2017 13:11:01 +01:00
To: Legacy Ornamental Mills
Thanks Roger
Have you used your LOM yet???
The answer that
Thanks Roger
Have you used your LOM yet???
The answer that you gave in line "a" is about right as far as Legacy is
concerned , I myself would not ever buy anything from them with their
practice of not answering Emails.
I have been running my own company for a very great time and would never
ha
Hi Richard
The answers to your questions are:-
a. I think you and your Woodchuck are on your own.
b. Nearly 100 Legacy Mills in UK
c. How many CNC were sold at Newark wood working show - I don't know and if I
did I would not say because if I did it would have been a "Commercial
Confidence" and a
Perhaps Roger can help- been wondering if my Woodchuck was the
only one ever imported to the U.K. and of course how many L.O.M.s are there
over here.
Also wondering how the sales of the C.N.C.s at the Newark U.K. woodworking
show went ---did they sell many??
Don't seem to hear a
30 matches
Mail list logo
