I'm going to try and find some double sided tape and try it on the legacy
What is every ones opinion on the best brand or sort I see legacy doesn't
recommend carpet tape. And something on line would be good ,any idea what
one legacy uses.
I could use a hot glue gun yes but I think tap
Anybody ever used 3M VHB tape for holding work on the mill I found it on the
net while surfing
And I was wondering how it would go to hold work for milling on the legacy like
the rotary table or on a mdf table
Any comments about this product
Bill
.
--
You received this mes
I’m reposting this with a new heading so any one in the future searching our
archives looking for info on double sided tape will hopefully be able to find
it easier . i hope it comes up as a new topic
Bill
https://www.youtube.com/watch?v=3uTsQ3dYRrk
I have not used the method
I am looking into double sided tape I'm not a great fan of using it
but others use it quite successfully so.
please tell me what brands and width tapes do you all use? are some
better than others?
and how successful do you all find it?.
how hard is it to remove the work from it afterwards
Bill, Legacy recommends the tape from Craft Supplies USA
www.woodturnerscatalog .com
- Original Message -
From: "Bill Bulkeley"
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, February 7, 2014 6:42:46 PM
Subject: double sided tape
I’m going to try and
Martin the link dose not work, But a number of company's sell double sided tape
for wood turning, Rockler, and WoodCraft as well as Peachtree and a lot of
others sell double sided tape for woodturners.
As for my self, I find that tape works well when temp. is above 50 deg. F.
below tha
Behalf Of curt george
Sent: Saturday, 8 February 2014 11:47 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: double sided tape
Martin the link dose not work, But a number of company's sell double sided tape
for wood turning, Rockler, and WoodCraft as well as Peachtree and a l
: Bill Bulkeley
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, February 07, 2014 5:11 PM
Subject: RE: double sided tape
Rockler or woodcraft might be the go I couldn’t find it at Peachtree or
www.woodturnerscatalog.com
If i can get a roll i can see then if its available
The link www.woodturnerscatalog.com does work
Permmacel tape part # 1049820001
Marlin
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-o
Curt, Bill, et al,Here
is a link directly
to the Double-sided Tape product listing at Woodturners' Catalog:http://www.woodturnerscatalog.com/p/5/-/18/85/-/5833/Permacel-Double-Sided-Tape?term=double%20sided%20tapeMac-Original Message-
From: Bill Bulkeley
Sent: Feb 7, 2014 8:11
tape
Curt, Bill, et al,
Here is a link directly to the Double-sided Tape product listing at
Woodturners' Catalog:
http://www.woodturnerscatalog.com/p/5/-/18/85/-/5833/Permacel-Double-Sided-Tape?term=double%20sided%20tape
Mac
_
_
-Original Message-
From:
I USE GORRILLA GLUE DOUBLE SIDED TAPE, IT WORKS WELL AND CLEANS UP EASY
WITH A LITTLE MINERAL SPIRITS
On Fri, Feb 7, 2014 at 8:08 PM, marlinhartman wrote:
> The link www.woodturnerscatalog.com does work
> Permmacel tape part # 1049820001
>
> Marlin
>
> --
> You
Thanks James, That is a new one on me. I did not know that Gorrilla Glue made a
double sided tape. Question. The biggest problem that I run into with all the
DST that Ive used in the past is temp. none to the tapes did well when the
temp. was under 50 deg. (which my shop in most of the year
Subject: double sided tape
Anybody ever used 3M VHB tape for holding work on the mill I found it on the
net while surfing
And I was wondering how it would go to hold work for milling on the legacy like
the rotary table or on a mdf table
Any comments about this product
Bill
3M VHB might be a good and quick alternative..
But getting back to legacy the issue people seem to have with using double
sided tape is that it might not hold
That is why I was thinking this stuff might work quite well .removing it I
believe might be the only trouble
But perhaps small
; allow for timber movement this 3M VHB might be a good and quick
> alternative..
>
> But getting back to legacy the issue people seem to have with using
> double sided tape is that it might not hold
>
> That is why I was thinking this stuff might work quite well .removing it I
Gassen
Sent: Wednesday, 28 January 2015 1:51 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: double sided tape
I know this is old, but the best source I have found is Amazon. I use it to
bond Stainless to glass in all-glass storefront systems.
They are 45 degree and 90 degree
ally what I know, and welcome to the group Phil.
Bill, I have to give the acetone a try as an accelerant. It makes a lot of
sense.
-Tim
- Original Message -
From: Bill Bulkeley
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, June 06, 2016 2:48 AM
Subject: double
am next in town, so an alternative to double sided
tape is probably of more interest to me than others.
A side note to ca glue I like to use it with wood glue ca glue on the edges and
wood glue in the middle so I don’t have to wait for glues to dry if my project
has a time issue.
Bill
I buy my double sided tape from Craft Supply. The web site is
www.woodturnerscatalog.com
Stan Shuford
s...@shuford.com
On Mon, Jun 6, 2016 at 5:48 AM, Bill Bulkeley wrote:
> I’m reposting this with a new heading so any one in the future searching
> our archives looking for info on double
MLCS.com has double face tape at 1" x 108ft for $15.95 a roll
-From: "Stan Shuford"
To: "Group Legacy Mill"
Cc:
Sent: Tue, 7 Jun 2016 08:54:54 -0400
Subject: Re: double sided tape
I buy my double sided tape from Craf
Hello Bill
For me Double sided tape is not practical. The tape will not stick well in
temperatures lower than 50 deg. F.
I've used a number of different types from 3" wide carpet tape. to 3/4" wide
3M double sided (Hang anything tape sold at every hardware store That I've
Hello Bill,
Thus far I have used double-sided tape about a dozen times, not a
lot. I don't like using it. It's not cheap, and the times that I've
skimped on the tape, I've regretted the results. I now use hot glue
and long for a vacuum clamp.
Begat
On Apr 3, 8:30 am,
Thank you so far more negative feedback than positive on the double sided
tape
Which sort of confirmed my reluctance to try to use it again
But what a bout the hot glue how strong do you find that and how hard or
easy is it
To remove the work and also the glue from the work?
Bill
From
"Bill Bulkeley"
Sender: legacy-ornamental-mills@googlegroups.com
Date: Mon, 4 Apr 2011 10:09:57
To:
Reply-To: legacy-ornamental-mills@googlegroups.com
Subject: RE: double sided tape
Thank you so far more negative feedback than positive on the double sided
tape
Which sort of confirmed m
mplaint is peeling the back off to stick it down.
> Sent from my Verizon Wireless BlackBerry
>
> -Original Message-
> From: "Bill Bulkeley"
>
> Sender: legacy-ornamental-mills@googlegroups.com
> Date: Mon, 4 Apr 2011 10:09:57
> To:
> Reply-To: legacy-ornam
: Bill Bulkeley
To: legacy-ornamental-mills@googlegroups.com
Sent: Sunday, April 03, 2011 8:09 PM
Subject: RE: double sided tape
Thank you so far more negative feedback than positive on the double sided tape
Which sort of confirmed my reluctance to try to use it again
But what a bout
Bill Bulkeley
> To: legacy-ornamental-mills@googlegroups.com
> Sent: Sunday, April 03, 2011 8:09 PM
> Subject: RE: double sided tape
>
> Thank you so far more negative feedback than positive on the double sided
> tape
>
> Which sort of confirmed my reluctance to try
all of the work on the legacy
Bill
- Original Message -
From: "begatbrown"
To: "Legacy Ornamental Mills"
Sent: Tuesday, April 05, 2011 9:45 AM
Subject: Re: double sided tape
Bill,
I should have made clear that I have used the glue primarily to
surface boa
I have not weighed in because I dislike using double sided tape and would
prefer a mechanical connection or clamping scheme. I can't really recommend
any brand in particular but of the carpet tapes that I have tried, the
outdoor - fiberglass reinforced types seem to work the best. Some
2011 5:27 PM
Subject: Re: double sided tape
> another method Tim put me on to is glue with wood glue a scrap piece of
> timber to the work and screw the scrap to the spoil board
> then turn the waste piece off later good idea for a bowl or something with
a
> small bit that has to be h
31 matches
Mail list logo
