Yes, I patched the 2.6.22.1 vanilla kernel with the libata patch from here.
http://home-tj.org/files/libata-tj-stable/libata-tj-2.6.22.1-20070803.tar.bz2
--David Madsen
On 8/3/07, Tejun Heo <[EMAIL PROTECTED]> wrote:
> David Madsen wrote:
> > * The long boot delay on ASUS board
Daniel J Blueman wrote:
> Tejun,
>
> On 03/08/07, Tejun Heo <[EMAIL PROTECTED]> wrote:
>> Daniel J Blueman wrote:
>>> The ICH8 south-bridge I have is the mobile variant and does come
>>> equipped with native parallel IDE - see page 447:
>>> http://download.intel.com/design/chipsets/datashts/313056
On 08/03/2007 02:00 PM, Robert Hancock wrote:
> This adds human-readable decoding of the ATA status and error registers
> (similar to what drivers/ide does) as well as the SATA Serror register to
> libata error handling output. This prevents the need to pore through
> standards documents to figure
On Saturday 04 August 2007, Alan Cox wrote:
> On Fri, 3 Aug 2007 20:28:39 +0200 (MEST)
> Mikael Pettersson <[EMAIL PROTECTED]> wrote:
>
> > The machine is an Athlon64 laptop with a K8T800 chipset. With the IDE
> > VIA driver the disk is detected as udma/100:
>
> Currently old IDE via driver has a
Hi,
On Saturday 28 July 2007, Sergei Shtylyov wrote:
> Hello.
>
> Bartlomiej Zolnierkiewicz wrote:
>
> >>On Fri, 27 Jul 2007 02:22:27 +0200
> >>Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]> wrote:
>
> >>>* Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16.
>
> >>>* Add IDE_HFLAG_POST
Tejun,
On 03/08/07, Tejun Heo <[EMAIL PROTECTED]> wrote:
> Daniel J Blueman wrote:
> > The ICH8 south-bridge I have is the mobile variant and does come
> > equipped with native parallel IDE - see page 447:
> > http://download.intel.com/design/chipsets/datashts/31305603.pdf . I do
> > see 35MB/s wi
On Fri, 3 Aug 2007 20:28:39 +0200 (MEST)
Mikael Pettersson <[EMAIL PROTECTED]> wrote:
> The machine is an Athlon64 laptop with a K8T800 chipset. With the IDE
> VIA driver the disk is detected as udma/100:
Currently old IDE via driver has a hack in it which goes 'did the BIOS
set UDMA3+' then I gu
On Fri, 03 Aug 2007 12:00:57 -0600
Robert Hancock <[EMAIL PROTECTED]> wrote:
> This adds human-readable decoding of the ATA status and error registers
> (similar to what drivers/ide does) as well as the SATA Serror register to
> libata error handling output. This prevents the need to pore through
The machine is an Athlon64 laptop with a K8T800 chipset. With the IDE
VIA driver the disk is detected as udma/100:
VP_IDE: IDE controller at PCI slot :00:11.1
ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
ACP
Hello.
Bartlomiej Zolnierkiewicz wrote:
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
Note that setting DMA modes will set the chipset to PIO4.
Acked-by: Sergei Shtylyov <[EMAIL PROTECTED]>
MBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-ide"
This adds human-readable decoding of the ATA status and error registers
(similar to what drivers/ide does) as well as the SATA Serror register to
libata error handling output. This prevents the need to pore through
standards documents to figure out the meaning of the bits in these
registers when l
> * Alan: IORDY handling -- upstream whenever Alan is happy
I'm happy with it from testing. Just a little worried about it going
upstream mid -rc as it could have a weird side effect somewhere. I've
verified an original pre ATA IDE drive with it too now 8)
> * Alan: ACPI checks for 80wire cable -
This is a quick guide to current libata work that is queued or in
progress in some way, shape or form.
First, a guide to the branches currently in use in
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
ALL
Everything that is exported for testing (and akpm's -mm tree).
Tejun Heo wrote:
Jeff Garzik wrote:
This is just a refresh of the existing libata-dev.git#new-eh patches
that convert all remaining old-EH drivers to new EH, against 2.6.23-rc1.
All three conversions are completely untested. pdc_adma and sata_qstor
need reviewing by someone with docs, in addit
Jeff Garzik wrote:
> This is just a refresh of the existing libata-dev.git#new-eh patches
> that convert all remaining old-EH drivers to new EH, against 2.6.23-rc1.
>
> All three conversions are completely untested. pdc_adma and sata_qstor
> need reviewing by someone with docs, in addition to tes
Quel Qun wrote:
> ATA device, with non-removable media
> powers-up in standby; SET FEATURES subcmd spins-up.
> Model Number: HDS724040KLSA80
> Serial Number: KRFS11RAGT2EZC
> Firmware Revision: KFAOA20N
> Standards:
> Used: ATA/AT
Daniel J Blueman wrote:
> The ICH8 south-bridge I have is the mobile variant and does come
> equipped with native parallel IDE - see page 447:
> http://download.intel.com/design/chipsets/datashts/31305603.pdf . I do
> see 35MB/s with DMA enabled from my CF on the 1 in 15 times the
> libata-kernel d
On 02/08/07, Mark Lord <[EMAIL PROTECTED]> wrote:
> Daniel J Blueman wrote:
> > On 02/08/07, Tejun Heo <[EMAIL PROTECTED]> wrote:
> >> Daniel J Blueman wrote:
> >>> I'll grab kernel logs from the legacy ATA boot; what else can help
> >>> debug this issue? No problem testing patches too.
> >> Yeap,
Yes, thanks!
Acked-by: Mikael Starvik <[EMAIL PROTECTED]>
-Original Message-
From: Bartlomiej Zolnierkiewicz [mailto:[EMAIL PROTECTED]
Sent: Friday, August 03, 2007 12:46 AM
To: linux-ide@vger.kernel.org
Cc: Mikael Starvik
Subject: [PATCH] ide-cris: always tune PIO
Cc: Mikael Starvik
19 matches
Mail list logo
