This patch adds support for PATA devices on the AVR32 using the CompactFlash
controller in 'True IDE mode'. DMA is currently not supported due to lack of
DMACK pins on the current AP7000 series.
Tested on AP7000 / STK1000.
Signed-off-by: Kristoffer Nyborg Gregertsen [EMAIL PROTECTED]
---
diff
Hi again everybody,
The driver is now working very nicely. The sporadic errors I reported earlier
were mostly due to the state of the EBI to ATA adaptor prototype card.
I have also added some time before R/W strobe to make sure signals are stable.
The only thing that bothers me is the huge
-stable review patch. If anyone has any objections, please let us know.
--
From: Tejun Heo [EMAIL PROTECTED]
Fix map entry 10b for ich8. It's [P0 P2 IDE IDE] like ich6 / ich6m.
Signed-off-by: Tejun Heo [EMAIL PROTECTED]
Acked-by: Kristen Carlson Accardi [EMAIL PROTECTED]
Cc:
Gabor Gombas wrote:
Hi,
Since I have upgraded to 2.6.22.1 from 2.6.20 I have problems with
Samsung disks. Sometimes the disks stall for about half a minute and
then I have these messages in the logs:
Aug 6 20:10:11 twister kernel: ata7: EH in ADMA mode, notifier 0x0
notifier_error 0x0
[cc'ing Robert Hancock and quoting the whole message for him]
Lieven Marchand wrote:
Hi,
the following drive
Aug 12 12:26:15 black kernel: Vendor: ATA Model: Maxtor 7H500F0
Rev:
HA43
Aug 12 12:26:15 black kernel: Type: Direct-Access
ANSI
SCSI
Frans Pop wrote:
Hi,
I've been running 2.6.23-rc2 without problems. Today I compiled 2.6.23-rc3
and shortly after boot got the following messages in my logs:
kernel: ata1.00: spurious completions during NCQ issue=0x0 SAct=0x7ffc7
FIS=005040a1:0020
kernel: ata1.00: cmd
Fajun Chen wrote:
Hi,
In sata_sil24.c, there's a special flag as shown below:
SIL24_FLAG_PCIX_IRQ_WOC = (1 24), /* IRQ loss errata on PCI-X */
Could someone explain the error condition and the rational behind the fix?
It's a workaround for an erratum which is under NDA, so can't say
Michal Piotrowski wrote:
Hi Andreas,
[Adding Jeff and linux-ide to CC]
On 13/08/07, Andreas Radke [EMAIL PROTECTED] wrote:
running ArchLinux kernel 2.6.22.2 on a Abit IP35 Pro motherboard with
Pro Intel P35 chipset (ICH9R + Jmicron) i have these entries all few
minutes:
ata1.00:
Brad Campbell wrote:
G'day all,
This has been happening on a lightly loaded box for a while now. I have
posted about it before.
The issue is now I've upgraded 3 drives from 250GB Maxtors to 750GB
WD's, it's just getting worse, particularly when the drives are loaded.
I've jumpered the WD's
Add TECRA M7 to broken suspend list. Reported by Marie Koreen.
Signed-off-by: Tejun Heo [EMAIL PROTECTED]
Cc: Marie Koreen [EMAIL PROTECTED]
---
drivers/ata/ata_piix.c |7 +++
1 file changed, 7 insertions(+)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index
On Tue, Aug 14, 2007 at 06:30:28PM +0900, Tejun Heo wrote:
Hmmm... That's timeout on cache flush, indicative of failing disk.
Please post the result of 'smartctl -a /dev/sdc'.
Will do when I get home. Note however that this only occurs in ADMA
mode. It never occured with 2.6.20 and it never
On Mon, 2007-08-13 at 09:26 -0700, Kristen Carlson Accardi wrote:
On Sat, 11 Aug 2007 16:00:53 +0200
Kay Sievers [EMAIL PROTECTED] wrote:
On 8/8/07, Kristen Carlson Accardi [EMAIL PROTECTED] wrote:
Here is an updated set of patches that implement Asynchronous Notification
support for
Hello,
I am the owner of a Dell Latitude D620 notebook with an ICH7 SATA
controller, unfortunately, the BIOS does not offer the option of using
native mode instead of compatibility mode when it comes to SATA. For
now, the ata_piix runs happily in compatibility mode. Looking at the
ICH7
Tejun Heo wrote:
ATA bus error is a strong indicator for hardware problem. Please get a
separate power supply (doesn't have to be an expensive one), power it up
[1], and connect some of the drives to the power supply and see whether
errors persist on those drives.
2 separate tests with the
Brad Campbell wrote:
http://www.fnarfbargle.com/CIMG1029.JPG (I have posted this screen shot
previously. It's still doing exactly the same thing on both boxes).
git-bisect shows up this commit as the guilty party. I can't just revert it on
a recent tree though.
Will investigate further.
Hello all,
sorry if this it too dumb a question, but since I haven't gotten any
results with the sata_mv driver (kernel 2.6.22.2), I was wondering if
the Highpoint RocketRaid 2300 controller - which features a Marvell chip
- is even supposed to work with sata_mv.
lspci shows in regard to the
On Tue, 14 Aug 2007 18:47:55 +0200
Karim 'Kasi Mir' Senoucci [EMAIL PROTECTED] wrote:
Hello all,
sorry if this it too dumb a question, but since I haven't gotten any
results with the sata_mv driver (kernel 2.6.22.2), I was wondering if
the Highpoint RocketRaid 2300 controller - which
6 HDD's with device arror and ATA BUS ERROR!!
nforce4 sli: sata_nv + sil3114,
Power: 700W FSP Epsilon
+3.3V: +3.28 V
+5V: +4.89 V
+12V: +12.16 V
libata or ... ?
Aug 14 20:51:08 bobr kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr
0x58 action 0x2 frozen
Aug 14 20:51:08
Alan Cox schrieb:
On Tue, 14 Aug 2007 18:47:55 +0200
Karim 'Kasi Mir' Senoucci [EMAIL PROTECTED] wrote:
Hello all,
sorry if this it too dumb a question, but since I haven't gotten any
results with the sata_mv driver (kernel 2.6.22.2), I was wondering if
the Highpoint RocketRaid 2300
Am Tue, 14 Aug 2007 19:15:52 +0900
schrieb Tejun Heo [EMAIL PROTECTED]:
Most likely a hardware issue.
* Please try a different harddrive/cable and connect to a different
port.
* Get a different power supply and see whether that changes anything.
already tried different ports, several
On Thu, Aug 09, 2007 at 01:51:06AM -0700, Andrew Morton wrote:
...
Changes since 2.6.23-rc2-mm1:
...
+alpm-enable-link-power-management-for-ata-drivers.patch
...
Updated ATA Aggressive Link Power Management patches
...
ata_scsi_link_pm_policy() can become static.
Signed-off-by: Adrian Bunk
On Thu, Aug 09, 2007 at 01:51:06AM -0700, Andrew Morton wrote:
...
Changes since 2.6.23-rc2-mm1:
...
+ide-ide-hook-acpi-psx-method-to-ide-power-on-off.patch
...
IDE tree updates
...
This patch removes the unused EXPORT_SYMBOL_GPL(ide_acpi_set_state)
Signed-off-by: Adrian Bunk [EMAIL
On Thu, Aug 09, 2007 at 10:42:54PM -0700, Andrew Morton wrote:
...
Changes since 2.6.23-rc1-mm2:
...
+ide-ide-remove-ide-dma-check.patch
IDE tree updates
...
static code mustn't be exported.
Signed-off-by: Adrian Bunk [EMAIL PROTECTED]
---
8cc9125428c1a2c547e76cd5f37b109b1991eb68
diff
Tejun Heo wrote:
[cc'ing Robert Hancock and quoting the whole message for him]
Lieven Marchand wrote:
Hi,
the following drive
Aug 12 12:26:15 black kernel: Vendor: ATA Model: Maxtor 7H500F0Rev:
HA43
Aug 12 12:26:15 black kernel: Type: Direct-Access ANSI
in the sata_mv source. Should I add something like:
{ PCI_VDEVICE(TTI, 0x2300), chip_604x },
as well?
Yes
Last but not least: I'm assuming that this driver - when working
correctly - will let me access the RAID arrays I setup via BIOS or
Windows driver, but there will be no
Hi Tejun,
I'm having some trouble with my e-SATA ports being reset. I'm
testing 2.6.22.1 with the 20070808 patch tarball on a nortec ds-1220
flashed to Silicon Image bios version 6.4.09 (the latest).
I'm testing with 6 500gig SATA drives shown as:
WD5000AAKS-22TMA0, 12.01C01, max
26 matches
Mail list logo