Sweet and most bodacious List Mom, what is the charge to procure a pan
to allow Gump to once more roam the streets of Seattle? It would need
the drain plug installed and maybe a few pan bolts. Shipped to 98105
On Sunday, February 12, 2006, at 08:31 AM, Kaleb C. Striplin wrote:
I have ple
I am wanting the whole shebang new. There were a few bolts that felt
cross threaded while trying to get the pan off. Going to want a fresh
drain plug and gasket.
On Saturday, February 11, 2006, at 07:29 PM, John Berryman wrote:
On Saturday, February 11, 2006, at 10:04 PM, redghost wrote:
It really was. All the way along there were minor scuffs, then that
huge drain bolt grabbed on and torn the back off the pan. Wonder if I
should install a skid plate.
On Saturday, February 11, 2006, at 05:04 PM, John Berryman wrote:
Things happen for a reason I'm told. The oil pan
I have plenty of them around.
OK Don wrote:
One would think that our local list mom - used parts dealer would have
chimed in by now ---
On 2/11/06, redghost <[EMAIL PROTECTED]> wrote:
Suggestion of non 61x models to scrounge from? there are no diesel
living at the PnP and the local recycler
t;'Mercedes Discussion List'" <[EMAIL PROTECTED]>
Subject: Re: [MBZ] Holed the Pan
Date: Sat, 11 Feb 2006 19:49:30 -0500
I got one from Rusty awhile back, never used it but as I recall it was only
about $30.
Trampas
-Original Message-
From: [EMAIL PROTECTED] [mai
ussion List <[EMAIL PROTECTED]>
To: Mercedes Discussion List <[EMAIL PROTECTED]>
Subject: Re: [MBZ] Holed the Pan
Date: Sat, 11 Feb 2006 19:12:20 -0500
redghost wrote:
> Do these weld for repair, or should I just get two from Rusty for when
> the Karma Bug bites me again?
I'd g
On Saturday, February 11, 2006, at 10:04 PM, redghost wrote:
Suggestion of non 61x models to scrounge from? there are no diesel
living at the PnP and the local recycler does not bother with 70's cars
Call Rusty, you'll have it at your door in no time without having to
waste time and fuel
One would think that our local list mom - used parts dealer would have
chimed in by now ---
On 2/11/06, redghost <[EMAIL PROTECTED]> wrote:
> Suggestion of non 61x models to scrounge from? there are no diesel
> living at the PnP and the local recycler does not bother with 70's cars
>
> On Saturda
Suggestion of non 61x models to scrounge from? there are no diesel
living at the PnP and the local recycler does not bother with 70's cars
On Saturday, February 11, 2006, at 04:24 PM, Jim Cathey wrote:
Something jumped up and bit the sh*t out of my oil pan in Gump.
Time to get out the welde
I think I've got a couple spare pans lying around...well, they're
still attached to NFG engines, but around nonetheless.
On 2/11/06, redghost <[EMAIL PROTECTED]> wrote:
> There seems to be a dearth of 61x pans in the local market at the
> moment. I do want the car back on the road, and if a spar
On Saturday, February 11, 2006, at 07:49 PM, Trampas wrote:
I got one from Rusty awhile back, never used it but as I recall it was
only
about $30.
Trampas
I hate quoting other people's prices but I want to say the pan I got
from Rusty last year was like $13.00 and the gasket was more li
where you
can get that kind of damage.
Werner
- Original Message -
From: "John Berryman" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" <[EMAIL PROTECTED]>
Sent: Saturday, February 11, 2006 8:04 PM
Subject: Re: [MBZ] Holed the Pan
On Saturday
On Saturday, February 11, 2006, at 07:02 PM, redghost wrote:
Do these weld for repair, or should I just get two from Rusty for when
the Karma Bug bites me again?
Just get one and be more careful. They're cheap enough to make you
think the gasket is overpriced.
Johnny B.
I Mac Therefore I
On Saturday, February 11, 2006, at 06:58 PM, redghost wrote:
Could have been. Karma was running low. Racing to show one of the
houses I rent out. This was going to be for a pack of mezkins with
lots of cars. Guess the man upstairs did not want that to take place.
Things happen for a rea
I got one from Rusty awhile back, never used it but as I recall it was only
about $30.
Trampas
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of redghost
Sent: Saturday, February 11, 2006 7:22 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] Holed the
Something jumped up and bit the sh*t out of my oil pan in Gump.
Time to get out the welder! Welding oily/fuely metal can be tricky,
as it soaks into the pores. Can be done, however. Of course, a
U-Pull pan, if available, is easier and plenty cheap enough.
-- Jim
Marshall,
I am very slow, slow as my car. That is what surprised me, was I hit
something going fast enough that it had force enough to go through the
pan.
There seems to be a dearth of 61x pans in the local market at the
moment. I do want the car back on the road, and if a spare is around,
redghost wrote:
Do these weld for repair, or should I just get two from Rusty for when
the Karma Bug bites me again?
I'd get a new pan from a recycler. Most people don't tear a hole in the
pan more than once - but if you're a really slow learner
Marshall
--
Marshall Booth (who
Do these weld for repair, or should I just get two from Rusty for when
the Karma Bug bites me again?
On Saturday, February 11, 2006, at 02:00 PM, Zeitgeist wrote:
I think the steel portion of the pan from any OM61X engine will work.
btw: The same thing happened to my old 220D back when my ex
Could have been. Karma was running low. Racing to show one of the
houses I rent out. This was going to be for a pack of mezkins with
lots of cars. Guess the man upstairs did not want that to take place.
On Saturday, February 11, 2006, at 01:37 PM, John Berryman wrote:
On Saturday, Februa
I think the steel portion of the pan from any OM61X engine will work.
btw: The same thing happened to my old 220D back when my ex drove it
down a steep hill at high speed, then bottomed out, tearing a
dime-sized hole in the front edge. I'm surprised as hell that she
even noticed it before drainin
On Saturday, February 11, 2006, at 03:55 PM, redghost wrote:
Something jumped up and bit the sh*t out of my oil pan in Gump. Got
about a half mile before I noticed the pressure dropping. Was able to
pull into a gas station and call for a tow while she piddled what
little oil she had left. Ju
Something jumped up and bit the sh*t out of my oil pan in Gump. Got
about a half mile before I noticed the pressure dropping. Was able to
pull into a gas station and call for a tow while she piddled what
little oil she had left. Just want to kick yourself in the nuts when
that happens and yo
23 matches
Mail list logo