In the why are U asking? department...
can 5300 RAM work in a 190/190cs?
Craig W.
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
on 1/2/03 3:32 PM, vicki wrote:
My 190 cs has just stopped! ...
When I didn't use mine for several months, it had strange symptoms, and I
even went so far as to purchase a PRAM battery for it. Before I changed
out the battery I discovered that the PRAM is rechargeable and just
needed a fresh
Hi all
Thanks for the advice i think that i will try to find a cheap psu for my 190
instead.
Victoria.
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299 |
-- Hi
Ok i need help from the group of you that strip boards and solder like (mad
dog) if he is listening.
My problem is the power connector on my 190 the psu is totally shot and i
need to replace it but the cost in the UK is silly so i have an old 150 mb
that is shot (nice big crack) can i
-- Hi
Ok i need help from the group of you that strip boards and solder like (mad
dog) if he is listening.
My problem is the power connector on my 190 the psu is totally shot and i
need to replace it but the cost in the UK is silly so i have an old 150 mb
that is shot (nice big crack) can i
In a message dated 8/12/02 4:38:16 PM, [EMAIL PROTECTED] writes:
Are you sure the connector between the 2 is identical ?
Yup, I use a 5300 charger (and batteries) interchangeably in my 190.
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronics
Victoria--
It should be fairly straightforward to transfer the connectors from one mb
to the other. I've done some surgery of this order--you have to be careful,
but it can be done. My tools of choice are a 15-watt grounded iron (for
static electricity safety) from Radio Shack and the finest
The internal HD on my 190cs is formatted using Silverlining 6.1, and when I
try to boot it into SCSI disk mode, it shuts down as soon as the HD drivers
load. It's not the disk mode adapter, 'cause it works on a Duo.
Any suggestions? I've already tried resetting the PRAM.
Thanks,
Jesse
--
Just how is a 17 watt power supply from the 150 supposed to
substitute for the 45 watt power supply of the 190, even if it doesn't have
to charge the battery?
Paul
-- Hi
Ok i need help from the group of you that strip boards and solder like (mad
dog) if he is listening.
My problem is
I also noticed someone mentioning a zip drive that fits into the floppy
drive bay. Neat! what else'll fit in there?
--
Alex Allee [EMAIL PROTECTED]
Something I find especially handy if you want to travel light is the AC/car
adaptor made by VST; you swap it for the floppy drive (that you
10 matches
Mail list logo