Re: [RE-wrenches] OB Charging/Comms Issues

nches.org> wrote:Hi Jay,This is a new issue, but I don’t believe it’s generator related. Without CC comms plugged in, generator is steadily charging. It was serviced recently and has solid voltage and frequency under load.  I am all for leaving the comms disconnected, but unfortunately there is no scre

Re: [RE-wrenches] OB Charging/Comms Issues

Hi Chris, Is this new or has it been always like this? jay > On Nov 8, 2024, at 1:42 PM, Chris Sparadeo via RE-wrenches > wrote: > > Hey wrenchers, > > I have an off-grid customer with a pair of VFX 3648 inverters, a FM 100 > charge controller and two eVault

Re: [RE-wrenches] OB Charging/Comms Issues

On Nov 8, 2024, at 1:58 PM, Dave Angelini Offgrid Solar via RE-wrenches wrote: Sounds like a basic generator issue. Use another gen for test !   Dave Angelini Offgrid Solar "we go where powerlines don't" https://offgridsolar1.com/ e-mail offgridso...@sti.net text 209 813 0060 On 2024-11-08

Re: [RE-wrenches] Tough goods for a marine environment

Check out Sunwize. On Nov 8, 2024, at 11:52 AM, Chris Daum via RE-wrenches wrote:Hi folks: We’re working on a system for a job off of the east coast; requirements include hurricane toughness and goods that can survive a saline marine environment.  Does anyone even make powder-coated racks anymore

Re: [RE-wrenches] EG4 Lithium absorb time in open loop configuration

Hi Jeremy When I’ve watched eg4 inverter/battery closed loop do its thing, it spends seconds at top voltage setting. Depending on what CC settings you have, just a few minutes is all you need. Jay > On Nov 7, 2024, at 6:31 AM, Jeremy Rodriguez via RE-wrenches > wrote: > &g

Re: [RE-wrenches] Outback tech support

Hi Chris, Outback wasn’t purchased by EG4 or signature solar but it was purchased by 1 owner of EG4/Signature solar and 1 from Big battery if my info is right. > On Nov 6, 2024, at 7:41 AM, Chris Schaefer via RE-wrenches > wrote: > > Just for fun I visited the EG4 website to see if they s

Re: [RE-wrenches] Sol-Ark Gen Input

It would be interesting to see if there is power there. Like put a low wattage 120v incandescent light bulb on it. If it was static wouldn’t the meter drain the volts?  JayOn Oct 28, 2024, at 7:31 AM, rick--- via RE-wrenches wrote:An update on this “issue”. Sol-Ark Tech Support said that the high

[RE-wrenches] mounting to a foam roof

in advance, jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cg

Re: [RE-wrenches] New Outback FXR Series as GTGBB on existing Off Grid Home

did connect wouldn’t it be possible for the inverter to try to sell to the generator? If you didn’t have to change grid to Gen? Jay > On Oct 23, 2024, at 8:47 PM, Jeremy Rodriguez via RE-wrenches > wrote: > >  > Wrenches, > We have a client that has brought utility power

Re: [RE-wrenches] Module snail trails

On Oct 24, 2024, at 4:40 PM, Jay wrote:That one cell you have a picture of sure looks suspicious to me. Especially given the good IR picture. It looks it’s physically broken, right about where a hard hat would rest while moving it. That level of hot spot can’t be good. There are two kinds of

Re: [RE-wrenches] washer on OutBack inverter

co-Gen power.Dave PalumboHyde Park, Vermont802-371-8678 voice or text-- next part --An HTML attachment was scrubbed...URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20241021/6799f15c/attachment-0001.htm>----

Re: [RE-wrenches] OB stacking with FXR inverters

Hi williamYou cannot use the balancing xformer with the A version. They also need the mate3S and new hub. 10.1?On Oct 21, 2024, at 1:59 PM, William Miller via RE-wrenches wrote:Friends: I am completely unable to reach Outback tech support so I am wondering if you can answer a question: I am repla

Re: [RE-wrenches] washer on OutBack inverter

Hi David I’ve never had an issue with any electronic washer with an Outback, that’s the best I can say. Jay > On Oct 21, 2024, at 9:12 AM, David Palumbo via RE-wrenches > wrote: > >  > Wrenches, > > I need to replace a front load washer in my off grid rental house.

Re: [RE-wrenches] RIP magnum

instead of selling it?   Drake Chamberlin Athens Electric LLC Ohio Electrical Contractor’s License 44810 NABCEP Certified PV Installation Professional ---   On 2024-10-17 18:51, Jay via RE-wrenches wrote: I just saw the news that magnum has closed its doors

[RE-wrenches] RIP magnum

I just saw the news that magnum has closed its doors. Jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings:

Re: [RE-wrenches] outback power FM 100 issue

Hi Todd That’s creative for sure! Not sure how I’d do that on the fm 100. Jay > On Oct 14, 2024, at 4:36 PM, Todd Cory via RE-wrenches > wrote: > >  > This works too. > > Todd > > > > On Monday, October 14, 2024 12:55pm, "jay via RE-wrenches&

[RE-wrenches] outback power FM 100 issue

don’t know if I’ll ever get anyone from OB on the phone. thanks jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & sett

Re: [RE-wrenches] All-In-Ones / Sol-Ark fail

age to the > array. > > Jason Szumlanski > Principal Solar Designer | Florida Solar Design Group > NABCEP Certified Solar Professional (PVIP) > Florida State Certified Solar Contractor CVC56956 > Florida Certified Electrical Contractor EC13013208 > > > On Thu, Oct 10

Re: [RE-wrenches] All-In-Ones / Sol-Ark fail

Jason What’s the possibllity it was a lighting strike? Jay > On Oct 10, 2024, at 2:57 PM, Jason Szumlanski via RE-wrenches > wrote: > >  > We have been talking a lot recently about all-in-ones. I just had a massive > fail during Hurricane Milton with a quad Sol-Ark 15K of

Re: [RE-wrenches] All-In-Ones / Sol-Ark fail

Good question for midnite. JayOn Oct 10, 2024, at 3:35 PM, Dave Tedeyan via RE-wrenches wrote:Yikes! I cannot speak to the AIO's in general. However, I do still always install some sort of inverter bypass in battery based systems. Then in case of a failure like this you can at least continue to p

Re: [RE-wrenches] sol ark battery

HI Michael, Thats good news. Can you monitor the individual battery cells volts/temp from the app or inverter? I can’t get an answer on that one. jay > On Oct 10, 2024, at 1:33 PM, Michael Morningstar via RE-wrenches > wrote: > > Just installed an AIO/Pflo16. The build

Re: [RE-wrenches] sol ark battery

ir, I haven't had any problems and the capacity claims seem legitimate. The value proposition can't be ignored. Jason Szumlanski Florida Solar Design GroupOn Wed, Oct 9, 2024, 7:29 PM jay <jay.pe...@gmail.com> wrote:Thats all super helpful, appreciate the advice everyone. I’ve not used

Re: [RE-wrenches] sol ark battery

95560www.greenwired.com       Leave a review! On Wed, 09 Oct 2024 16:29:20 -0700 jay via RE-wrenches wrote ---Thats all super helpful, appreciate the advice everyone. I’ve not used the sol ark 15 and just wanted to make sure I wasn’t missing anything about battery options.And specifically the ones

Re: [RE-wrenches] sol ark battery

Thats all super helpful, appreciate the advice everyone. I’ve not used the sol ark 15 and just wanted to make sure I wasn’t missing anything about battery options. And specifically the ones that don’t seem to play well. Jay > On Oct 9, 2024, at 2:56 PM, Jason Szumlanski via RE-wrenc

[RE-wrenches] sol ark battery

HI All Wondering what people are using for lithium battery and sol ark? And no, LA is not a option for this system. Outdoor rated would be preferred, heated isn’t needed. thanks in advance jay ___ List sponsored by Redwood Alliance Pay

Re: [RE-wrenches] Alternatives to Iota chargers?

Hi David. That is quite odd. I’ve used dozens of iotas over the years and have not seen this issue. Is it a newer on that uses the IQ adapter? For an alternative you can try powermax. I’ve had good luck with those too. Jay > On Oct 8, 2024, at 7:40 PM, David Palumbo via RE-wrenc

Re: [RE-wrenches] VFXR4048 stacked with an FXR3048

I have done in the past VFX and FX. I haven not done VFRX snd FXR but it should be ok. newest firmware is master. jay > On Oct 8, 2024, at 12:21 PM, William Miller via RE-wrenches > wrote: > > I’m in the field with a dead VXR3048. Will the FXR play nice with the VFXR? >

Re: [RE-wrenches] Lead acid batteries taking too much current

Hi DaveI bet there is no way to install a temp sensor?Question about the 7 hrs absorb time. Where did you come up with that figure. Is the 5% adjustable or the adjustment is in the battery capacity?ThxJayOn Oct 4, 2024, at 8:30 AM, Dave Tedeyan via RE-wrenches wrote:Hi All, I have inherited and d

Re: [RE-wrenches] Racking on residential rooftops

not that easy when I tried it and that seems necessary, so I am looking for hints on your process.   William Miller Solar17395 Oak Road, Atascadero, CA 93422805-438-5600www.millersolar.comCA Lic. 773985  From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jay via RE

Re: [RE-wrenches] Racking on residential rooftops

Hi JimI recommend a laser level. Can be just a line laser or can be a multi line level. Brightness is key. Much easier, faster and accurate than using string. Also makes it much easier to keep everything straight JayOn Oct 3, 2024, at 7:44 PM, William Miller via RE-wrenches wrote:Good question, J

Re: [RE-wrenches] Enphase Batteries and IQ7+ Won't Restart

. jay > On Sep 30, 2024, at 5:51 PM, Wayne Irwin via RE-wrenches > wrote: > > Hurricane Helene has taught us the hard way that Enphase batteries with > anything other than IQ8's won't restart. > The issue is that when the batteries try to restart (at the non-programmab

Re: [RE-wrenches] SLA battery analyzer recommendations

I would contact GNB and find out what testing products  they recommend and testing procedures. JayOn Sep 26, 2024, at 4:38 PM, Glenn Burt via RE-wrenches wrote: West Mountain Radio makes a Computerized Battery Analyzer that would perform testing.-GlennSent from my 'smart'phone, so ple

Re: [RE-wrenches] favortie micro inverters?

is 16-60v MPPT range on its micro, 3.75X Always lots to consider even with a micro. Jay > On Sep 25, 2024, at 7:29 AM, jay wrote: > > Hi Vince, > > Your math looks correct of course, but I think you left out a variable in > that the panel won’t be operating at max

Re: [RE-wrenches] favortie micro inverters?

operating unless it can’t even produce enough volts to make that voltage. I’ve never seen a curve of Enphase MPPT efficiency vs input voltage. Would like to though. Jay > On Sep 24, 2024, at 8:38 PM, Vince McClellan via RE-wrenches > wrote: > > Hello Wrenches List > I

[RE-wrenches] Trade show

Since Dana brought up OB, does anyone have any updates as to OB? If they were not at the trade show then that is enough evidence to me they are gone. Jay > On Sep 24, 2024, at 7:02 AM, Dana Orzel via RE-wrenches > wrote: > > As previously mentioned, I am upgrading my h

Re: [RE-wrenches] AGM recommendations?

he did. At this point with the cost of LFP vs VRLA and cycle life, availability etc and all that, LFP is the clear winner for me. With the exception of sub freezing temperatures. Just my 2 cents jay > On Sep 23, 2024, at 9:23 AM, Maverick Brown via RE-wrenches >

Re: [RE-wrenches] Switching to LiFePO4

cells, at around 20-21v LVD ( which is all I use) Which every legacy inverter I know of has a higher LBCO set point than that. Jay > On Sep 18, 2024, at 7:22 AM, Mac Lewis via RE-wrenches > wrote: > > Hi David, > > This upgrade comes up a lot. You are at a point where you

Re: [RE-wrenches] Switching to LiFePO4

accurate the % meter in the battery is. I’m sure you’ll get a whole lot of advice, good luck jay > On Sep 17, 2024, at 9:19 AM, David Palumbo via RE-wrenches > wrote: > > Wrenches, > > I have a nice little rental house here in my off-grid neighborhood that after >

Re: [RE-wrenches] Fm100’s now not stuck at full charge Update

float termination, it links each CC so that the first one to float causes the others to go into float as well. I’ve never found it to be a big deal either way. Charge termination is the other one which I always defeat. But sounds like it all working. Jay > On Sep 9, 2024, at 7:21

Re: [RE-wrenches] Fm100’s stuck at full charge

It doesn’t make any sense that the controllers would be processing 2800 watts internally. It would be so hot you couldn’t touch them. Think of a 1500 watt electric heater and this would be 2X. I would put my clamp on to confirm. But I suspect it’s going somewhere Jay > On Sep 7, 2

[RE-wrenches] Schneider mppt 60-150 question

Hi all. Any issues with the xw 60-150 operating lithium batteries? Namely that they are fast enough in their regulation Thx Jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE

[RE-wrenches] Discover battery update.

such data”. Thankfully the installer kept all his paperwork after he retired and moved so he was able to provide it to discover. I also heard that Schneider is discontinuing the XW line. Jay ___ List sponsored by Redwood Alliance Pay optional

Re: [RE-wrenches] Fortress Shutdown?

might be connected. You might check the charge voltages/time to make sure they are correct and I can’t remember if the classic has battery sense wire connections. jay > On Aug 27, 2024, at 2:51 PM, Ray Walters via RE-wrenches > wrote: > > The SPD was on one of the PV inpu

Re: [RE-wrenches] Red Lion Pumps

Hi Drake What makes you say think it’s a soft start? 3 wire isn’t a soft start. It does have a reduced start load but not soft start. I’d go with a grundfos sq. Jay > On Aug 27, 2024, at 9:08 AM, Drake Chamberlin via RE-wrenches > wrote: > >  > I am looking at a Red Li

Re: [RE-wrenches] Cell based monitoring

I’ll check this and the control by web out. Thanks everyone jay > On Aug 20, 2024, at 9:28 AM, Mac Lewis via RE-wrenches > wrote: > > Hi Jay, > > Regarding Victron, it may still be useful. You can boot up the Cerbo with DC > power, they have a DC powered cell modem

Re: [RE-wrenches] Cell based monitoring

Commander Remote Power • SunFlow Systems Cathodic Protection maver...@mavericksolar.com512-460-9825On Aug 20, 2024, at 8:15 AM, Jay via RE-wrenches wrote:Hi AllI’ve got a client who has a large ranch and wants to monitor (via a web and or app) and  control ( simple on/off dry contact) some pumps and

[RE-wrenches] Cell based monitoring

? Thanks in advance Jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cg

Re: [RE-wrenches] OB Radian / FM60 grid tie mystery

Commander Remote Power • SunFlow Systems Cathodic Protection maver...@mavericksolar.com512-460-9825On Aug 18, 2024, at 3:59 PM, Kirk Herander via RE-wrenches wrote:Looks like its only programmable directly on the Mate3s, not in optics RE. Or maybe I haven;t found it yet.On Sun, Aug 18, 2024 at 3:22 PM Jay

Re: [RE-wrenches] OB Radian / FM60 grid tie mystery

There is a setting called FLEXnet dc advanced control. Default is YI always set it to NPg 128 in my manual. JayOn Aug 18, 2024, at 11:11 AM, Kirk Herander via RE-wrenches wrote:Hello All,. I have a Radian 8048 system in service for over 10 years now. It sold back quite normally until the last sev

Re: [RE-wrenches] discover lithium warranty issues.

O 81144sgsrenewables@gmail On Aug 15, 2024, at 9:49 AM, jay via RE-wrenches wrote: Hi All,I have an installer  buddy where i used to live who's having to try and get a discover lithium warrantied.  Its 3 yrs old, 2 years installed.The dealer is closed, and the customer doesn't have t

Re: [RE-wrenches] Outback question

; If he's not running the generator through a transformer, then he's probably >> just running 120 vac off one leg of the generator, with no load on the other >> leg. This imbalance will definitely cause generator failures long term, and >> not reliably charge the b

Re: [RE-wrenches] Outback question

issues. Could be settings or an actual board. Probably not the fet board but could be either the ac or control board. Jay > On Aug 15, 2024, at 7:02 PM, Ron Young via RE-wrenches > wrote: > > Hi Wrenches, I have a client who has a 6 year old Outback 3524 inverter. It > has per

[RE-wrenches] discover lithium warranty issues.

block which makes trying to get info out of the battery all but impossible as it won’t stay on long enough to download the info. Does anyone have a contact who could help my installer/friend with this issue? thanks Jay ___ List sponsored by Redwood

Re: [RE-wrenches] Outback VFX 2812 charger not working

HI Michael, I’d say the AC board on the VFX is suspect. Bad relay. Yes to #2. That will work just fine. Good luck jay > On Aug 14, 2024, at 4:13 PM, Michael Welch via RE-wrenches > wrote: > > Wrenches. I am hesitant to post here, since I am not really a Wrench. I feel &g

Re: [RE-wrenches] Rubix Batteries?

r, LLC > Potsdam, NY > (315) 212-2114 Call/ Text > >>> On Aug 13, 2024, at 5:03 PM, Jay via RE-wrenches >>> wrote: >>> >>  >> I hadn’t heard of these. Very ingenious mounting system. >> >> Thx >> Jay >> >>>>

Re: [RE-wrenches] Rubix Batteries?

I hadn’t heard of these. Very ingenious mounting system. Thx Jay > On Aug 13, 2024, at 2:45 PM, Foxfire Energy via RE-wrenches > wrote: > >  We installed a 20kW 48V set in a Grid Tied system in May.. Knowledgeable > (and friendly) Tech Support.. So far so good.. Certainly

Re: [RE-wrenches] Midnight solar AIO webinar

It’s on NAZ solar home page. It didn’t want to link JayOn Aug 13, 2024, at 8:44 AM, Kirpal Khalsa via RE-wrenches wrote:When? Info or link? ThanksKirpalOn Tue, Aug 13, 2024, 6:21 AM Jay via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:midnite is having a webinar about the A

[RE-wrenches] Midnight solar AIO webinar

midnite is having a webinar about the AIO and batteries. Sign up. Jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address

Re: [RE-wrenches] Blue Planet Energy

Since we are asking about that. Does anyone have any news on Outback? ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & setti

Re: [RE-wrenches] Sunpower connectors

connectors included on them are TE PV4-S. i haven't seen those a quite a few years. On Thu, Aug 1, 2024 at 12:15 PM Jay <jay.pe...@gmail.com> wrote:Unfortunately sunpower is about out of business.Warranty might not be possible at this point JayOn Aug 1, 2024, at 10:04 AM, Evan M via RE-

Re: [RE-wrenches] Sunpower connectors

Unfortunately sunpower is about out of business. Warranty might not be possible at this point Jay > On Aug 1, 2024, at 10:04 AM, Evan M via RE-wrenches > wrote: > >  > Anyone happen know the make/model of connectors associated with the Sunpower > cracking issues a coupl

Re: [RE-wrenches] MN 15-12KW-AIO

Sol Ark is definitely not made in america. Its made by Deye in China. I don’t know all the rules about what you have to do to call it made in america, like put a label on it or something, but made in china. jay > On Aug 1, 2024, at 6:17 AM, Maverick Brown via RE-wrenches >

Re: [RE-wrenches] Small Cabin inverter

Hi Chad. Stay away from magnum. Do you want to keep that 12v or make changes? Jay > On Jul 30, 2024, at 5:47 PM, Chad Waits via RE-wrenches > wrote: > >  > Gentlemen, > > I ask for this help with the caveat that I have very little knowledge of the > specifics of

Re: [RE-wrenches] KiloVault Issues

I never did hear why altE folded. Anyone know?On Jul 30, 2024, at 1:50 PM, Richard Nicol via RE-wrenches wrote:Chris Brown of Solampio has purchased the remaining inventory of AltE, including the building. He has extra KV BMS boards for sale as well as some reconditioned batteries, firmware updat

Re: [RE-wrenches] KiloVault Issues

back at some point. The other thing I just remembered is that there are balancers from a few companies that I’d recommend ( so does kilovault). Kilovault and victron are the two that come to mind but are probably others. Jay > On Jul 30, 2024, at 12:36 PM, Maverick Brown via RE-wrenc

[RE-wrenches] UL3741 inverter listing for residential roofs

electronics thanks in advance jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options

Re: [RE-wrenches] Fortress Envy E-stop

anual references. Does anyone have a good, direct number for Fortress tech support that will pick up. I'm getting nothing...Thanks!On Thu, Jul 25, 2024, 7:39 AM Jay via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:Hi LewisYes both the 12 and 18 have RSDIt’s a button on the left side

Re: [RE-wrenches] Fortress Envy E-stop

Hi Lewis Yes both the 12 and 18 have RSD It’s a button on the left side. Shuts off AC and PV Jay > On Jul 25, 2024, at 7:30 AM, Mac Lewis via RE-wrenches > wrote: > >  > Hello Wrenches, > > Does anyone know if the 12kW Envy inverter has remote stop capability?

Re: [RE-wrenches] Identify Inverter / Mango Power

I don’t know but it’s form factor is very similar to LUX/deye Handles, door latches, disconnects. I wonder if it’s a Ali express special? Jay > On Jul 24, 2024, at 9:42 AM, Jason Szumlanski via RE-wrenches > wrote: > > Can someone help me identify the inverter in the atta

Re: [RE-wrenches] AGM blew on discharge

Hi Drake What do you mean it off gassed? Like blew the top off? > On Jul 24, 2024, at 8:40 AM, Drake Chamberlin via RE-wrenches > wrote: > >  > A severely abused bank of Rolls Surrette batteries had one battery off gas > heavily on discharge. It seems like the off gassing happens on overcha

[RE-wrenches] have a laugh

y, non UL, no real data ( surprise) super narrow PV window. Just bizarre what’s out there. Jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change list

Re: [RE-wrenches] workhorse pumps

appreciated They have a really wide range. Another brand I’ve worked on is RPS thanks jay > On Jul 22, 2024, at 3:10 PM, Michael Morningstar via RE-wrenches > wrote: > > My pump guy (he's 82 and worked in the business since he was a kid) likes > them. He tears pum

[RE-wrenches] workhorse pumps

Does anyone know anything about this company? https://workhorsepumps.com I have someone asking me about it. thanks in advanced. jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE

Re: [RE-wrenches] Outback in general

e AIO. Jay > On Jul 20, 2024, at 5:24 PM, Dan Fink via RE-wrenches > wrote: > > James Showalter from Signature Solar and Eric Lundgren from Big Battery > purchased Outback Solar. I have had terrible tech support experiences from > both of those outfits, they tend to con

Re: [RE-wrenches] Outback in general

HI Howie, Does the AIO communicate with other brands of batteries? I concure about using batteries/inverters from same OEM, its my preference. Jay > On Jul 20, 2024, at 6:37 PM, Howie Michaelson via RE-wrenches > wrote: > > I have been testing a pre-production model of Midnit

Re: [RE-wrenches] Outback in general

I just checked the OB forums page and there is nothing current. One thing I found says that the new president of OB is the CEO of Big Battery. I don’t know that to be a fact. Which is also somehow related to signature solar/ EG4. My guess is that if/when OB resurfaces it won’t have the same product

Re: [RE-wrenches] Another Mate 3 programming issues

directly to see if it reads it, probably easier with another mate. It just sucks to not have tech support or anyone on wrenches from some OEMS Jay > On Jul 19, 2024, at 10:13 AM, Christopher Warfel via RE-wrenches > wrote: > > This is grid tied system with all firmware upda

Re: [RE-wrenches] Mate 3 programming issues

Hi jim. WilliamMight be right, but what equipment do you have on this system?Doing a cat 5 unplug,plug back might helpJayOn Jul 18, 2024, at 3:18 PM, William Miller via RE-wrenches wrote:Jim:You may be logged in as a limited access user. Try logging in as installer. William MillerMiller Solar.com

Re: [RE-wrenches] AES RACK MOUNT

Yes I really like the rack mounts I’m curious about the AES mounts and others that don’t have an enclosure. How does code deal with that?  ThxJayOn Jul 17, 2024, at 9:28 AM, Michael Morningstar via RE-wrenches wrote:Because I work mostly alone, I'm digging the rack mounts. Dealing with 200 lb bat

Re: [RE-wrenches] VFD drives

Does anyone have even an crazy idea of why this engineer would say that VFD drives don’t like generators? Besides the obvious, IE he doesn’t know what he’s talking about? thanks everyone jay > On Jul 11, 2024, at 11:22 AM, James Jarvis wrote: > > There should be no issues. M

Re: [RE-wrenches] VFD drives

Thanks Michael, Thats what I wanted to confirm. For some reason the engineer on this project is in way over his head. OK back to my client jay > On Jul 11, 2024, at 11:11 AM, Michael Morningstar via RE-wrenches > wrote: > > I’ve years of experience running vfds on generat

[RE-wrenches] VFD drives

engineer seems to think there is but he won’t say why. i can’t think of any reason at all? This generator is only running this one load, the well pump. jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re

Re: [RE-wrenches] Fortress LFP batteries and Outback charge controller

The evault doesn’t see the multiple inputs, just like any battery. The envy % reading via web is working well. And yes it’s a bit weird to the solar from the inverter not add up to the daily charge numbers But it’s working fine If you follow oem charge instructions the open loop voltages are a bit

Re: [RE-wrenches] Fortress LFP batteries and Outback charge controller

No problem at all. I just did a system exactly like that.  Works fine. JayOn Jun 29, 2024, at 5:49 PM, Kirk Herander via RE-wrenches wrote:All,I'm wondering if there are any precautions if charging a Fortress Evault LFP bank using 1 or more OB charge controllers, in tandem with an Envy inverter P

Re: [RE-wrenches] Outback app

lines don't" https://offgridsolar1.com/ e-mail offgridso...@sti.net text 209 813 0060 On 2024-06-17 2:49 pm, Jay via RE-wrenches wrote: Is the Outback app working?I can log into my account but not the app?ThxJay___List sponsored by Redw

[RE-wrenches] Outback app

Is the Outback app working? I can log into my account but not the app? Thx Jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email

Re: [RE-wrenches] Dual battery bank switch for 48 VDC system

Hi GregHow about this midnite box midnitesolar.comPersonally what I don’t like about single switch A or B is there is an off time. With the midnite box, you switch both on, and turn the off the one you want. That way there is never an off time. Just a thought. JayOn Jun 15, 2024, at 11:19 AM, greg

Re: [RE-wrenches] Two Outback Radian 8048 fails in same week..what is likely wrong in 7+ year inverters?

Call Zonna energy. It’s most likely 1 of the control boards. And probably not the power modules. Not all that uncommon especially for the non A versions. Jay > On Jun 9, 2024, at 4:50 PM, Scot Arey via RE-wrenches > wrote: > >  > Longtime Outback user but since the exp

Re: [RE-wrenches] How many times can a rafter have a lag screw put in and out before it is no longer structurally sound? Some roofs getting their 3rd set of new shingles

Hi Scot What a fascinating issue. I can’t help as to the structural concerns but I like the deck mounts idea to make sure you don’t have any issues. Jay > On May 29, 2024, at 4:17 PM, Scot Arey via RE-wrenches > wrote: > >  > With all our Texas hail storms, we now have roo

[RE-wrenches] Discover rack mount battery connectors

type of connector. Thanks Jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches

Re: [RE-wrenches] Discover AES exposion

That is fantastic service!  And it also confirms  that LFP batteries are actually capable of the same explosive energy ( even more actually) as NMC contrary to the claims made by many that it’s impossible. While I’m using LFP batteries in most systems, it does scare me much more than Lead. JayOn Ma

Re: [RE-wrenches] Water system with Grundfos SQFlex

HI Brad, Is this off/on grid? And are the two wells near each other or they just join up at the tank and float switch? If you’ve got the power then I’d install just a standard AC centrifugal pump. Sure uses more power but lasts forever. And is maybe $500 vs $2500 And you’ve said minimal water

[RE-wrenches] offgrid solar installer in anchorage/SE alaska

HI All Any recommendations for a off grid installer in Anchorage or SE alaska? Pls contact me off list thanks jay ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re

Re: [RE-wrenches] Water system with Grundfos SQFlex

Hi JerryWhat equipment are you using to pull steel  from that depth?Jay On May 26, 2024, at 3:18 PM, Jerry Shafer via RE-wrenches wrote:Hey wrenchesWater leaks in wells, I just pulled my well pump out at a mere 390 feet, older galvanized 11/4 « steel, where the Water rose and dropped the pipe

Re: [RE-wrenches] Water system with Grundfos SQFlex

And of course using a torch to soften the tubing just enough so that the barb fitting can insert and then grab into the plastic with the clamps. For 1” its not needed but helpful. For 1.25”- 2” its needed, or at least I’ve never been able to get a solid connection without heat. Jay > On

Re: [RE-wrenches] Water system with Grundfos SQFlex

aks. Install the clamps at 120 or 180 degrees from each other is important. If you want to do it correctly then use a HDPE butt welding machine. I just never could afford one. Jay > On May 26, 2024, at 12:54 PM, Bradley Bassett via RE-wrenches > wrote: > > Just went th

Re: [RE-wrenches] Water system with Grundfos SQFlex

  Dave Angelini Offgrid Solar "we go where powerlines don't" https://offgridsolar1.com/ e-mail offgridso...@sti.net text 209 813 0060 On 2024-05-26 4:26 am, Jay via RE-wrenches wrote: Hi Brad With

Re: [RE-wrenches] Water system with Grundfos SQFlex

Hi Brad With 2 check valves leaking I’d look for a broken pipe or a corroded fitting. If there is anyway to isolate between the 2 check valves then you could measure the pressure drop on both sides which should point to the direction of the leak. Jay > On May 25, 2024, at 7:41 PM, Brad

Re: [RE-wrenches] Outback Tech Support

Hi Drake, What it says to me is that they either fired everyone or said move to tx. I’ve always joked that if the potential project I’m to work on starts badly it never gets better. I still don’t understand why the owners of EG4 would by a legacy inverter company? Jay > On May 24, 2

[RE-wrenches] Outback

I was talking to signature solar today. Signature solar and EG4 are sister companies. I don’t have info if one owns the other or if they are equal partners? They did admit they bought OB. But didn’t know if signature or EG4 bought them. Jay

  1   2   3   4   5   6   7   8   9   10   >