In a message dated 02/13/2002 10:01:06 PM Central Standard Time,
[EMAIL PROTECTED] writes:
> ust getting into my first fullhouse glider. I would desire info on
> building (how to glue in those long pushrods..), servo installation on
> obechi and composite ships, and how to set up flaps ,ail
One more thought on servo installation in the wings.
Make sure that matching pairs of flap servos (ailerons also) are installed
in exactly the same way. That means that both servos have the same length
arms, and both point to the exact same angle when at neutral. This will
save you a lot of he
I have to say the best tip I was ever given when setting up my first
full house was this.
Masking tape your servos in place in the wing and finish all of your
programming. Make sure all surfaces give you the required amount of
travel, and that your flaps come close to 90 degrees etc, and that
Robert,
From: "Robert Marlan" <[EMAIL PROTECTED]>
> Just getting into my first fullhouse glider. I would desire info on
> building (how to glue in those long pushrods..), servo installation on
> obechi and composite ships, and how to set up flaps ,ailerons etc.
> I know how to program the rad
4 matches
Mail list logo