Hello,
I love the abbility to add a static mapping to a mac
adress in the dhcp server but I saw that the only way
to actually make it works is by rebooting pfsense
every time you add an adress... otherwise even if you
ask for a new adress (client side), the dhcp dont
gives you the static one you
Version
0.84.6
If I have connected
computer /Celer 2.4Ghz, 256MB RAM, 100Mbps 3COM TX interface/ directly to test
computer via crossover cable, or both are in some switch,
ping time response
is from bellow 1ms to 9-10 msand abou 700 - 900ms if i go to the menu, for
example Traffic shaper.Is
There seems to be definitely a glitch in the upgrade procedure, at least on
the older versions. Blank lines are inserted in the loader.rc making it grow
above a size where the loader cannot handle it any more. I guess, with a
file size of 784 bytes, you should be below this limit (Christian's
I will a little bit laboring with bridge, and result is, that if in bridge
mode you don`t be able access from one to other bridged interface, there
helps a reboot pfsense system /cold reboot from menu pfsense/
Is it bug or normal???
Bob.
-Original Message-
From: jason [mailto:[EMAIL
On 9/16/05, Robo.K. [EMAIL PROTECTED] wrote:
Version
0.84.6
1./
In traffic shaper is
still problem as described here -
http://marc.theaimsgroup.com/?l=pfsense-supportm=112662324102230w=2
Fixed in CVS, must have missed the 0.84.6 release.
2./
In Queues
isn`t displayed three boxes for
On 9/16/05, Robo.K. [EMAIL PROTECTED] wrote:
Version
0.84.6
If I have connected
computer /Celer 2.4Ghz, 256MB RAM, 100Mbps 3COM TX interface/ directly to test
computer via crossover cable, or both are in some switch,
ping time response
is from bellow 1ms to 9-10 msand abou 700 - 900ms
Rerun the EZ Shaper Wizard. We moved the scheduler location so it can
be sync'd properly.
Scott
On 9/16/05, Damien Dupertuis [EMAIL PROTECTED] wrote:
Hello,
I just upgraded from 0.84 to 0.84.6 and the system
gives me this:
php: : There were error(s) loading the rules:
First of all I have no idea what yoru saying.
Second of all please do not start new conversations for the same
posts. Thats what _REPLY_ is for!
Scott
On 9/16/05, Robo.K. [EMAIL PROTECTED] wrote:
I will a little bit laboring with bridge, and result is, that if in bridge
mode you don`t be
Please create a ticket, this has been reported before.
--BillOn 9/16/05, Robo.K. [EMAIL PROTECTED] wrote:
0.84.6
After attempt to
configure PFSTAT after save options there i gett screen with error
messages:
$value =
$_POST['location0'];$value = $_POST['counters0'];$value =
This was fixed in 0.84.6. I don't have that problem here.
Scott
On 9/16/05, Robo.K. [EMAIL PROTECTED] wrote:
0.84.6
After attempt to configure PFSTAT after save options there i gett screen
with error messages:
$value = $_POST['location0'];
$value = $_POST['counters0'];
2./
In Queues isn`t displayed three boxes for speed - min/max/shared.
Not sure what you're asking for here? Is this a bug, or a feature request?
O my god. In 0.84 it works . In 0.84.6 it missing.Are you blind :-]?
In QUEUES:Edit
in Scheduler options
bellow of Random Early
On 9/16/05, Robo.K. [EMAIL PROTECTED] wrote:
2./
In Queues isn`t displayed three boxes for speed - min/max/shared.
Not sure what you're asking for here? Is this a bug, or a feature request?
O my god. In 0.84 it works . In 0.84.6 it missing.Are you blind :-]?
This kind
It is done thank you...
--- Scott Ullrich [EMAIL PROTECTED] a écrit :
Rerun the EZ Shaper Wizard. We moved the scheduler
location so it can
be sync'd properly.
Scott
On 9/16/05, Damien Dupertuis [EMAIL PROTECTED]
wrote:
Hello,
I just upgraded from 0.84 to 0.84.6 and the
On 9/16/05, Robo.K. [EMAIL PROTECTED] wrote:
I know that kernel in monowall 4.xx is faster than 5.xx
used in PFSENSE. But from this
For the archives. pfSense uses FreeBSD 6, not FreeBSD 5.
--Bill
Oddly, the upgrade should have moved that setting to the right
place. :-/ I'll look into this a little more as this
shouldn't have bitten you.
--BillOn 9/16/05, Damien Dupertuis [EMAIL PROTECTED] wrote:
It is done thank you...--- Scott Ullrich [EMAIL PROTECTED] a écrit : Rerun the EZ Shaper
Strongly seconded!
--
Kurt VanderScheer main: 269-382-2800
Vice President of Engineering v-mail: 800-873-0625
Michigan Message Center e-mail: [EMAIL PROTECTED]
Kalamazoo, MI web: www.mmc-net.com
-Original Message-
From: Mojo Jojo
ping is about the must ugliest speed test I have ever heard of.
use ipperf. there are discussions of this in our archive.
And for the record freebsd DOES do ICMP rate limiting.
Scott
On 9/16/05, Bill Marquette [EMAIL PROTECTED] wrote:
On 9/16/05, Robo.K. [EMAIL PROTECTED] wrote:
I just commited a change. Hopefully this will fix your problem.
From a shell do:
update_file.sh /usr/local/www/services_dhcp_edit.php
Scott
On 9/16/05, Damien Dupertuis [EMAIL PROTECTED] wrote:
Hello,
I love the abbility to add a static mapping to a mac
adress in the dhcp server but I
This is fixed in CVS. I installed NTOP and its working fine.
Scott
On 9/16/05, Robo.K. [EMAIL PROTECTED] wrote:
version 0.84.6
In NTOP after change password is still then error message on screen, as in
previous build 0.84:
on page
http://pfsenseip/pkg_edit.php
Warning:
Okay,
I've done it but it didn't worked...here is what I
got:
$ update_file.sh /usr/local/www/services_dhcp_edit.php
Status: 404
Content-type: text/html
X-Powered-By: PHP/4.3.10
No input file specified.
trying to fetch latest
/usr/local/www/services_dhcp_edit.php
Status: 404
Content-type:
trying to fetch latest
/usr/local/www/services_dhcp_edit.php
That worked. Try setting a static item again.
Scott
On 9/16/05, Damien Dupertuis [EMAIL PROTECTED] wrote:
Okay,
I've done it but it didn't worked...here is what I
got:
$ update_file.sh
This works for me, can you try your update_file.sh again?
# update_file.sh /usr/local/www/services_dhcp_edit.php
trying to fetch latest /usr/local/www/services_dhcp_edit.php
#
--BillOn 9/16/05, Damien Dupertuis [EMAIL PROTECTED] wrote:
Okay,I've done it but it didn't worked...here is what
Okay, it works now... thanks guys!!!
--- Bill Marquette [EMAIL PROTECTED] a écrit
:
This works for me, can you try your update_file.sh
again?
# update_file.sh
/usr/local/www/services_dhcp_edit.php
trying to fetch latest
/usr/local/www/services_dhcp_edit.php
#
--Bill
On
Scott,
My system was installed from scratch as 0.79.4 or 0.80. I don't remember the
exact release but I installed it from CD by the very end of August. Than I
upgraded to 0.82.4 and finally to 0.84. This is the 0.84 upgrade that broke
my boot up. The .70 estimate doesn't seem to fit my case...
Sorry, I meant 0.79. There was a race condition on shutdown that we corrected.
Scott
On 9/16/05, Dan Swartzendruber [EMAIL PROTECTED] wrote:
At 04:24 PM 9/16/2005, you wrote:
Scott,
My system was installed from scratch as 0.79.4 or 0.80. I don't remember the
exact release but I installed
Hello guys, slowdown please.
That was only a friendly egg on.
I respect your work.
And my english is very bad. I wan`t asperse
you.
Excuse me.
Bob.
From: Bill Marquette
[mailto:[EMAIL PROTECTED] Sent: Friday, September 16, 2005
5:03 PMTo: support@pfsense.comSubject: Re: [pfSense
Support]
26 matches
Mail list logo
