On Thursday 31 May 2007 19:26, Tan Han Chiang wrote:
> did anyone here managed to use the micaz standalone AES encryption
> sucessfully?? Also does anyone knows the crypto used for the AES
> standalone encryption? Is it CBC, counter mode or ??
The micaz uses the CC2420 radio, which has AES-128
Dear customer,
Sorry, i am out of office till 02-06-2007.
Best regards, Siegfried Schaefer
Schaefer EDV-Dienstleistungen und Softwareentwicklungen
Goethestr. 29
75031 Eppingen
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://m
Hi Nicolas,
On Thursday 31 May 2007 01:48, Nicolas Esteves wrote:
> I'm working with telosb and I'm trying to find a solution to estimate
> the time taken by some operation accurately (micro second). I first
> tried the TimerMicro but as i found after in the mailing list (here
> http://mail.millen
Dear all,
I am having some problem with the temperature sensor value that I am getting
from MTS310 sensorboard. I am using Crossbow's contrib/xbow/apps/XSensorMTS300
application. This application reads , among other things, the temperature
sensor value. My problem is I always get 0 from Temper
Hi,
did anyone here managed to use the micaz standalone AES encryption
sucessfully?? Also does anyone knows the crypto used for the AES
standalone encryption? Is it CBC, counter mode or ??
Any help would be appreciated. Thanks
Institute For Infocomm Research - Disclaimer -
On May 31, 2007, at 11:31 AM, Vipin Kashyap wrote:
Hi all!
Further to my last post, I have been told that the reason for the
MicroTimer code not working is that TOSSIM can not simulate hardware
interrupts, the behaviour being non deterministic. However, the TOSSIM
documentation (TOSSIM: A Simul
Hi,
I use MTS310 to sample acceleration data. As the resolution of AD is 10
bit, the maximum data should be 0x3ff, but most of my data are around
0x7A80. I only revised the start time of ADXL202E from 17 ms to 3 ms in file
'AccelP.nc' as I changed two capacitors of ADXL202E from 0.1 uF to 0.01
Does anyone know where I can find more detailed documentation on
MultiHopLEPSM.
I need to modify the routing protocol, but I still don't understand fully
how it works.
-Brian
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail
I thought that was strange as well. It turns out that I had an older
version of ncc (1.2alpha5) on my path from working with T1, and it was
calling the wrong compiler. Thanks for the help!
- Ryan
Aurélien Francillon wrote:
Hi Ryan,
Le jeudi 31 mai 2007 11:58, J. Ryan Stinnett a écrit :
I'
Hi all!
Further to my last post, I have been told that the reason for the
MicroTimer code not working is that TOSSIM can not simulate hardware
interrupts, the behaviour being non deterministic. However, the TOSSIM
documentation (TOSSIM: A Simulator for TinyOS Networks) by Philip Levis
and Nelson L
Dear customer,
Sorry, i am out of office till 02-06-2007.
Best regards, Siegfried Schaefer
Schaefer EDV-Dienstleistungen und Softwareentwicklungen
Goethestr. 29
75031 Eppingen
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://m
Hi !
The link below will take you to the Blink folder in CVS repository of the
tinyos project at sourceforge.net. There you can view and download THE
RIGHT files as desired:
http://tinyos.cvs.sourceforge.net/tinyos/tinyos-1.x/apps/Blink/
Regards,
vipin
> hi
>
> i want to know if somebody has eve
Question is, how do I post an addendum to a thread that was existing
before I joined the mailing list?
Regards,
vipin
>
> You must subscribe to the list you want to participate. After that,
> you'll get all postings by email. Remember to "reply all" or whatever
> your mail reader offers to includ
Hi,
Yes, I can ping both machines. I tried to close the firewall on my Windows
machine but with no use.
I can telnet from the Linux machine to the windows machine over port 9001
Regards
islheg
- Original Message -
From: "Urs Hunkeler" <[EMAIL PROTECTED]>
To: "Islam Hegazy" <[EMAIL
I tried to set up TinyOS as describe here:
http://www.moteiv.com/community/Tmote_Linux_install
for my Gentoo Linux box. I installed msp430 from ebuilds, and all the
rest from sources.
I seem to have the required tools ready:
$ ncc --version
ncc: 1.2alpha5
nescc: 1.2.8a
$ msp430-gcc --version
msp4
You can get correct files from http://tinyos.cvs.sourceforge.net/tinyos/ to
compare with yours.
Are you sure that your installation is complete without error?
Firat TARAKTAS
Electrical&Electronics Engineer
Reseracher
GENETLAB INFORMATION TECHNOLOGIES
Kayisdagi Caddesi Kar Plaza D Blok Kat:3 34
Hi,
I am looking for a simple way to communicate with an UART port of a tmote,
on which is connected a reader. The reader supports a specific message
format. I therefore need to send a massage to the tmote on which runs an
application that will forward the message to the reader. And it should
ans
Hi,
Can you send us the error and your actions?
Firat TARAKTAS
Electrical&Electronics Engineer
Reseracher
GENETLAB INFORMATION TECHNOLOGIES
Kayisdagi Caddesi Kar Plaza D Blok Kat:3 34752
Icerenkoy / ISTANBUL / TURKIYE
Phone: +90 (216) 573 00 85 (int.354)
Fax: +90 (216) 469 85 07
[EMAIL PRO
hi
i want to know if somebody has ever done all tutorials for tinyos 1.1 ?
Indeed, i try to compile the first application but it doesn't work. I look
at files and i see that there are some mistakes? does somebody have got the
right files for the blink application ?
thanks.
Hi Ryan,
Le jeudi 31 mai 2007 11:58, J. Ryan Stinnett a écrit :
> I've just moved from TinyOS 1.x to T2 and was trying to compile TOSSIM for
> the Blink app, but got these errors which I don't know how to fix. I'd
> greatly appreciate any suggestions!
>
> $ make micaz sim
...
> avr-gcc: unrecog
Hi Raj ,
Le jeudi 31 mai 2007 04:51, raj raj a écrit :
> Hi all,
>
> Sorry I forgot to add one more question:
> >From Deluge's code, I think Golden image starts from 0x of program
> > memory. But InternalFlashC can write from (0x000 to 0xfff). How is that
> > possible (that is if InternalFlas
I've just moved from TinyOS 1.x to T2 and was trying to compile TOSSIM for the
Blink app, but got these errors which I don't know how to fix. I'd greatly
appreciate any suggestions!
$ make micaz sim
mkdir -p build/micaz
placing object files in build/micaz
writing XML schema to app.xml
compi
You must subscribe to the list you want to participate. After that,
you'll get all postings by email. Remember to "reply all" or whatever
your mail reader offers to include the list as a recipient. Please read
the FAQ to see how to subscribe and unsubscribe.
Regards,
Harri
-Original
Hi !
Can anyone tell me how to post replies / add further comments to an existing
thread. I am not able to find an option on the pages.
Thanks & regards,
--
Vipin Kashyap
Roll# 05307415
M Tech (Electronic Systems)
Hostel-9, Room# 294
IIT Bombay
Ph# +91-9969031997
___
Hi all !
I am having a problem compiling the High frequency sampling in
/tinyos-1.x/apps using 'make pc'. The error I get is reproduced below:
MicroTimerM.nc:125: old-style parameter lists not supported
MicroTimerM.nc:125: warning: return-type defaults to `int'
make: *** [exe0] Error 1
The probl
Hi,
I'm working with telosb and I'm trying to find a solution to estimate
the time taken by some operation accurately (micro second). I first
tried the TimerMicro but as i found after in the mailing list (here
http://mail.millennium.berkeley.edu/pipermail/tinyos-help/2007-May/024953.html)
I u
26 matches
Mail list logo