ср, 7 февр. 2024 г. в 03:14, Jonas Karlman :
>
> Update defconfig for rk3328-rock64 with new defaults.
>
> Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
What is abould rockchip-efuse?
>
> Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
> of FIT
(Resend from subscribed address.)
On Wed, Feb 7, 2024 at 8:04 AM Jonas Karlman wrote:
>
> Update defconfig for rk3328-roc-cc with new defaults.
>
> Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
>
> Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
>
Hello Heinrich,
On 2024-02-07 08:12, Heinrich Schuchardt wrote:
On 2/7/24 01:02, Jonas Karlman wrote:
Replace the rockchip,cryptov1-rng compatible with compatibles used in
the linux device tree for RK3288, RK3328 and RK3399 to ease sync of
SoC
device tree from linux.
Signed-off-by: Jonas
Hi Roger
On 06/02/24 7:11 pm, Roger Quadros wrote:
>
>
> On 06/02/2024 07:31, MD Danish Anwar wrote:
>>
>>
>> On 05/02/24 6:07 pm, Roger Quadros wrote:
>>>
>>>
>>> On 05/02/2024 12:20, MD Danish Anwar wrote:
On 05/02/24 3:36 pm, Roger Quadros wrote:
>
>
> On
On 2/7/24 01:02, Jonas Karlman wrote:
Replace the rockchip,cryptov1-rng compatible with compatibles used in
the linux device tree for RK3288, RK3328 and RK3399 to ease sync of SoC
device tree from linux.
Signed-off-by: Jonas Karlman
It is strange that U-Boot only uses the random number
On 06-Feb-24 22:58, Andrew Davis wrote:
> On 2/6/24 2:56 AM, Aradhya Bhatia wrote:
>> Refactor common QoS code into a new common header file, and the soc
>> specific setup_qos functions into a common API.
>>
>> Rename $(soc)_qos_count and $(soc)_qos_data variables to qos_count and
>> qos_data.
On 2024-02-07 01:02, Jonas Karlman wrote:
Update defconfig for rk3328-rock64 with new defaults.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue
On 2024-02-07 01:02, Jonas Karlman wrote:
Change to use a common FIT load order, same-as-spl > SD-card > eMMC on
RK3328 boards. Only EVB and Radxa ROCK Pi E is affected by this change.
Signed-off-by: Jonas Karlman
Looking good to me.
Reviewed-by: Dragan Simic
---
Sync rk3328 device tree from linux v6.8-rc1.
Signed-off-by: Jonas Karlman
---
arch/arm/dts/rk3328-evb.dts | 1 +
arch/arm/dts/rk3328-nanopi-r2s.dts | 3 +-
arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts | 4 +-
arch/arm/dts/rk3328-orangepi-r1-plus.dts | 1 +
When RK3328 boards run SPL from eMMC and fail to load FIT from eMMC due
to it being missing or checksum validation fails there is a fallback to
read FIT from SD-card. However, without proper pinctrl configuration
reading FIT from SD-card will fail:
U-Boot SPL 2024.04-rc1 (Feb 05 2024 - 22:18:22
The U-Boot driver try to base the gpio bank id on the gpio-ranges prop
and fall back to base the bank id on the node name. However, the linux
driver try to base the bank id on the gpio alias id and fall back on
node order.
This can cause issues when SoC DT is synced from linux and gpioX@ nodes
Replace the rockchip,cryptov1-rng compatible with compatibles used in
the linux device tree for RK3288, RK3328 and RK3399 to ease sync of SoC
device tree from linux.
Signed-off-by: Jonas Karlman
---
arch/arm/dts/rk3328-u-boot.dtsi | 2 +-
arch/arm/dts/rk3399-u-boot.dtsi | 2 +-
Update defconfig for rk3328-nanopi-r2* boards with new defaults.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM
Update defconfig for rk3328-rock64 with new defaults.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM.
Update defconfig for rk3328-orangepi-r1-plus boards with new defaults.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to
Add Kconfig options to enable support for booting from SPI NOR flash on
Pine64 Rock64.
The generated bootable u-boot-rockchip-spi.bin that can be written to
0x0 of SPI NOR flash. The FIT image is loaded from 0x6, same as on
RK35xx boards.
=> sf probe
SF: Detected gd25q128 with page size
This reverts commit 3523c07867b403d5b3b68812aebac8a5afa5be4c.
Booting from SPI was already allowed before this commit was first
introduced. A few lines further down the exact same code already existed
and still does.
Signed-off-by: Jonas Karlman
---
arch/arm/mach-rockchip/spl-boot-order.c | 3
Add Kconfig options to enable support for booting from SPI NOR flash on
Orange Pi R1 Plus boards.
The generated bootable u-boot-rockchip-spi.bin that can be written to
0x0 of SPI NOR flash. The FIT image is loaded from 0x6, same as on
RK35xx boards.
Signed-off-by: Jonas Karlman
---
Similar to RK35xx the BootRom in RK3328 can read all data and look for
idbloader at 0x8000, same as on SD and eMMC.
Use the rksd format and modify the mkimage offset to generate a bootable
u-boot-rockchip-spi.bin that can be written to 0x0 of SPI NOR flash.
Signed-off-by: Jonas Karlman
---
Update defconfig for rk3328-roc-cc with new defaults.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM.
Update defconfig for rk3328-rock-pi-e with new defaults.
Remove the xPL_DRIVERS_MISC=y option, no misc driver is used in xPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM.
Change to use a common FIT load order, same-as-spl > SD-card > eMMC on
RK3328 boards. Only EVB and Radxa ROCK Pi E is affected by this change.
Signed-off-by: Jonas Karlman
---
arch/arm/dts/rk3328-nanopi-r2c-plus-u-boot.dtsi | 6 --
arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi |
Update defconfig for rk3328-evb with new defaults.
Remove the xPL_DRIVERS_MISC=y option, no misc driver is used in xPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM. Also
This series contains miscellaneous updates to defconfigs, syncs latest
device trees from linux, fixes an issue loading FIT from SD-card when
running SPL from eMMC and enables building a bootable SPI image on
RK3328 boards.
I am also adding myself as a reviewer for the three RK3328 boards I own.
From: Igor Opaniuk
Add correct check for parameter count.
This fixes this issue when `hash` cmd is invoked without params:
=> hash
data abort
pc : [] lr : []
reloc pc : [<60019204>]lr : [<5afcffa8>]
sp : ba6dd9c8 ip : bf7391f0 fp : bf74ec14
r10: 0001 r9 : ba6dfea0 r8
From: Igor Opaniuk
Add info about slot_suffix param for avb verify.
Signed-off-by: Igor Opaniuk
---
doc/android/avb2.rst | 8 +---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/doc/android/avb2.rst b/doc/android/avb2.rst
index a072119574f..c0b2bedb831 100644
---
From: Igor Opaniuk
Use existing str_avb_slot_error() function for obtaining
verification fail reason details.
Take into account device lock state for setting correct
androidboot.verifiedbootstate kernel cmdline parameter.
Signed-off-by: Igor Opaniuk
---
cmd/avb.c | 50
From: Igor Opaniuk
Introduce str_avb_io_error() and str_avb_slot_error() functions,
that provide a pointer to AVB runtime error message.
Signed-off-by: Igor Opaniuk
---
common/avb_verify.c | 49
include/avb_verify.h | 3 ++-
2 files changed, 51
From: Igor Opaniuk
Introduce AVB_OPS_CHECK macro for checking AvbOps before using
it to avoid code duplication.
Simplify and add more context for prints where it's needed.
Signed-off-by: Igor Opaniuk
---
cmd/avb.c | 156 --
1 file changed,
From: Igor Opaniuk
Make error prints more verbose with additional context.
Also s/print/debug/g for prints, which might be relevant only
for debugging purposes.
Signed-off-by: Igor Opaniuk
---
common/avb_verify.c | 31 ++-
1 file changed, 18 insertions(+), 13
From: Igor Opaniuk
Move SPDX license identifiers to the first line, so it conforms
to license placement rule [1]:
Placement:
The SPDX license identifier in kernel files shall be added at the first
possible line in a file which can contain a comment. For the majority
of files this is the first
From: Igor Opaniuk
mmc_switch_part() is used for switching between hw partitions
on eMMC (boot0, boot1, user, rpmb).
There is no need to do that for SD card.
Signed-off-by: Igor Opaniuk
---
common/avb_verify.c | 8 +---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git
This patch series include:
- Simplify and add more context for debug/error prints where it's needed.
- Move SPDX license identifiers to the first line, so it conforms
to license placement rule.
- Use mmc_switch_part() only for eMMC.
- Rework do_avb_verify_part, take into account device lock
On 1/31/24 15:57, Caleb Connolly wrote:
The Qualcomm specific dwc3 wrapper isn't hugely complicated, implemented
the missing initialisation for host and gadget mode.
Signed-off-by: Caleb Connolly
---
drivers/usb/dwc3/dwc3-generic.c | 99 -
1 file
From: BELOUARGA Mohamed
The actual driver does not work when there is no linked PHY. These
changes add support for fixed-link feature in the device tree.
Signed-off-by: BELOUARGA Mohamed
---
drivers/net/macb.c | 189 -
1 file changed, 117
On 2/6/24 6:21 AM, Manorit Chawdhry wrote:
Syncs the DT from Linux v6.8-rc1.
Remove udmap overrides and handle location change of chipid node.
Message doesn't match the patch. This patch should just be squashed
into the previous one anyway.
Andrew
Signed-off-by: Manorit Chawdhry
---
On 2/6/24 2:56 AM, Aradhya Bhatia wrote:
Refactor common QoS code into a new common header file, and the soc
specific setup_qos functions into a common API.
Rename $(soc)_qos_count and $(soc)_qos_data variables to qos_count and
qos_data. When QoS settings of more SoCs are added, only one pair
On Tue, Jan 23, 2024 at 01:03:00PM -0500, Tom Rini wrote:
> On Tue, Jan 23, 2024 at 11:27:57AM +, Conor Dooley wrote:
> > On Mon, Jan 22, 2024 at 06:55:01PM +, Conor Dooley wrote:
> > > On Mon, Jan 22, 2024 at 01:47:17PM -0500, Tom Rini wrote:
> > > > On Mon, Jan 22, 2024 at 06:36:31PM
On 11/28/23 05:34, Artur Rojek wrote:
> Introduce support for Conclusive WHLE-LS1088A Single Board Computer.
>
> Co-developed-by: Jakub Klama
> Signed-off-by: Jakub Klama
> Signed-off-by: Artur Rojek
> ---
>
> v3: new patch
>
> arch/arm/Kconfig | 19 ++
>
Add support for booting the imxrt1050-evk from spi.
Add imximage config and the ability for SPL to boot from NOR.
Signed-off-by: Jesse Taube
---
V1 -> V2:
- Add defconfig to MAINTAINERS
- Change Copyright of imximage-nor.cfg to myself
- Fix spelling and grammar
- Use imperative mood
---
Add documentation for SPI boot.
Signed-off-by: Jesse Taube
---
V1 -> V2:
- Change s/Adds/Add
- Change imxrt1050-evk_spi to fspi
- Fix spelling and grammar
- Mention the SPI NOR flash part number
---
doc/board/nxp/imxrt1050-evk.rst | 30 ++
1 file changed, 30
On 11/28/23 05:34, Artur Rojek wrote:
> Introduce support for Conclusive WHLE-LS1046A Single Board Computer.
>
> Co-developed-by: Jakub Klama
> Signed-off-by: Jakub Klama
> Signed-off-by: Artur Rojek
> ---
>
> v3: no change
>
> v2: - drop non-DM_ETH case
> - clean-up defines in
On Tue, 6 Feb 2024 at 16:44, Ilias Apalodimas
wrote:
>
> Hi Marek,
>
> On Sun, Dec 17, 2023 at 01:33:39AM +0100, Marek Vasut wrote:
> > Avoid allocating and loading the BSS section.
> >
>
> Can we elaborate a bit more on why we need this? AFAICT there's no code
> loading those segments in memory
Hi there Marek,
Am 05/02/2024 um 12.40 schrieb Marek Behún:
Hello Max,
Out of curiousity, what is your use case for having these random
numbers on this platform in U-Boot?
I use 2 EspressoBin (Armada 3720) as routers, both of them use the
TurrisMox firmware. RNG enables the EFI RNG protocol
Hello,
I am using the imx93-var-som_defconfig configuration on commit
v2024.04-rc1. When producing signed or unsigned images on an unclosed
board everything works fine.
However, once the board is closed (ahab_close command is issued), u-boot
hangs this way:
--8<---cut
Hi Marek,
On Sun, Dec 17, 2023 at 01:33:39AM +0100, Marek Vasut wrote:
> Avoid allocating and loading the BSS section.
>
Can we elaborate a bit more on why we need this? AFAICT there's no code
loading those segments in memory and swapping them, so why do we need the
OVERLAY? On top of that the
On Tue, Feb 06, 2024 at 09:05:33PM +0800, jihongbin wrote:
> It may be that there are relatively few people using this function, or the
> length of the transmitted data is less than 128byte * 255 byte, so the
> triggering conditions for the above problems are not encountered;
>
> I actually
On 2/6/2024 5:51 PM, Manorit Chawdhry wrote:
Patch is sent to upstream linux [0].
[0]:
https://lore.kernel.org/all/20240201-b4-upstream-j721s2-fix-vtm-devid-v2-0-85fd568b7...@ti.com/
Signed-off-by: Manorit Chawdhry
---
arch/arm/dts/k3-j721s2-mcu-wakeup.dtsi | 2 +-
1 file changed, 1
On Tue, Feb 06, 2024 at 09:05:33PM +0800, jihongbin wrote:
> It may be that there are relatively few people using this function, or the
> length of the transmitted data is less than 128byte * 255 byte, so the
> triggering conditions for the above problems are not encountered;
>
> I actually
AM64 ES2.0 bootrom seems to enable WAIT0EDGEDETECTION interrupt.
This causes a lockup at A53 SPL when accessing NAND controller
or ELM registers.
A good option would be to softrest GPMC block at probe
but this cannot be done for AM64 as SOFTRESET bit is marked
as reserved in SYSCONFIG register.
It may be that there are relatively few people using this function, or
the length of the transmitted data is less than 128byte * 255 byte, so
the triggering conditions for the above problems are not encountered;
I actually discovered this problem during testing. Continuous
transmission always
This is a duplicate, please ignore
在 2024/2/6 10:49, Hongbin Ji 写道:
When the blk sequence number is 255 and cblk is 0, the original XOR condition
produces a result of 0,and the judgment condition will be unsuccessful.
Signed-off-by: Hongbin Ji
---
common/xyzModem.c | 2 +-
1 file changed,
On Tue, Feb 06, 2024 at 10:49:25AM +0800, Hongbin Ji wrote:
> When the blk sequence number is 255 and cblk is 0, the original XOR condition
> produces a result of 0,and the judgment condition will be unsuccessful.
>
> Signed-off-by: Hongbin Ji
> ---
> common/xyzModem.c | 2 +-
> 1 file
On Tue, Feb 06, 2024 at 05:51:07PM +0530, Manorit Chawdhry wrote:
> This series does the DT sync with Linux 6.8-rc1 as that has the pmic
> nodes required for AVS support and then adds AVS Support for J721S2.
>
> AVS Test for J721S2:
>
On 06/02/2024 07:31, MD Danish Anwar wrote:
>
>
> On 05/02/24 6:07 pm, Roger Quadros wrote:
>>
>>
>> On 05/02/2024 12:20, MD Danish Anwar wrote:
>>>
>>>
>>> On 05/02/24 3:36 pm, Roger Quadros wrote:
On 02/02/2024 18:40, Anwar, Md Danish wrote:
> Hi Roger,
>
> On
On Tue, Feb 06, 2024 at 10:57:12AM +0530, Sumit Garg wrote:
> Hi Tom,
>
> On Fri, 2 Feb 2024 at 23:32, Tom Rini wrote:
> >
> > On Fri, Feb 02, 2024 at 06:35:23PM +0530, Sumit Garg wrote:
> >
> > > Changes in v5:
> > > --
> > > - Rebased on tip of master
Hi,
On Thu, 01 Feb 2024 13:18:51 -0500, Sean Anderson wrote:
> The return value of write_sparse_chunk_raw is unsigned, so the existing
> check has no effect. Use IS_ERR_VALUE to detect error instead, which is
> what write_sparse_chunk_raw does itself.
>
>
Thanks, Applied to
On 2024-02-06 13:37, Quentin Schulz wrote:
On 2/6/24 13:33, Dragan Simic wrote:
On 2024-02-06 13:26, Quentin Schulz wrote:
On 2/4/24 11:39, Dragan Simic wrote:
On 2024-02-04 10:46, Jonas Karlman wrote:
On 2024-02-04 05:21, Dragan Simic wrote:
On 2024-02-03 16:18, Dragan Simic wrote:
On
Hi Dragan,
On 2/6/24 13:33, Dragan Simic wrote:
[Some people who received this message don't often get email from
dsi...@manjaro.org. Learn why this is important at
https://aka.ms/LearnAboutSenderIdentification ]
Hello Quentin,
On 2024-02-06 13:26, Quentin Schulz wrote:
On 2/4/24 11:39,
Hello Quentin,
On 2024-02-06 13:26, Quentin Schulz wrote:
On 2/4/24 11:39, Dragan Simic wrote:
On 2024-02-04 10:46, Jonas Karlman wrote:
On 2024-02-04 05:21, Dragan Simic wrote:
On 2024-02-03 16:18, Dragan Simic wrote:
On 2024-02-03 15:18, Jonas Karlman wrote:
On 2024-02-03 14:19, Dragan
Hi Dragan, Jonas,
On 2/4/24 11:39, Dragan Simic wrote:
[Some people who received this message don't often get email from
dsi...@manjaro.org. Learn why this is important at
https://aka.ms/LearnAboutSenderIdentification ]
Hello Jonas,
On 2024-02-04 10:46, Jonas Karlman wrote:
On 2024-02-04
Add AVS and PMIC regulator configs
Signed-off-by: Manorit Chawdhry
---
configs/j721s2_evm_r5_defconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/configs/j721s2_evm_r5_defconfig b/configs/j721s2_evm_r5_defconfig
index b180f6c48c0e..847758bb5334 100644
---
Patch is sent to upstream linux [0].
[0]:
https://lore.kernel.org/all/20240201-b4-upstream-j721s2-fix-vtm-devid-v2-0-85fd568b7...@ti.com/
Signed-off-by: Manorit Chawdhry
---
arch/arm/dts/k3-j721s2-mcu-wakeup.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Add bootph-pre-ram property to VTM node and the pmic node.
Signed-off-by: Manorit Chawdhry
---
arch/arm/dts/k3-j721s2-r5-common-proc-board.dts | 9 +
1 file changed, 9 insertions(+)
diff --git a/arch/arm/dts/k3-j721s2-r5-common-proc-board.dts
Initialize AVS Class 0.
Signed-off-by: Manorit Chawdhry
---
arch/arm/mach-k3/j721s2_init.c | 8
1 file changed, 8 insertions(+)
diff --git a/arch/arm/mach-k3/j721s2_init.c b/arch/arm/mach-k3/j721s2_init.c
index fb0708bae162..7080c519cf4c 100644
--- a/arch/arm/mach-k3/j721s2_init.c
+++
The other compatible is not in use by any other DT node.
Sync the compatible with the compatible present in Linux DT to help with
DT Sync from Linux as well.
Signed-off-by: Manorit Chawdhry
---
drivers/power/pmic/tps65941.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Add AVS Support for J721S2.
Signed-off-by: Manorit Chawdhry
---
drivers/misc/k3_avs.c | 22 ++
1 file changed, 22 insertions(+)
diff --git a/drivers/misc/k3_avs.c b/drivers/misc/k3_avs.c
index e20dc6755c29..28e59fcf41d4 100644
--- a/drivers/misc/k3_avs.c
+++
Check if AVS could not be programmed and print a warning.
Signed-off-by: Manorit Chawdhry
---
drivers/misc/k3_avs.c | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/k3_avs.c b/drivers/misc/k3_avs.c
index 02cd90f9d12c..e20dc6755c29 100644
---
vd_data remains the same for most of the SoCs but there are some
differences in power domains and clocks that don't need a change to
compatible and can be handled at SoC level.
Change the data population logic from compatible to soc_match_device to
add support for newer devices.
Signed-off-by:
Syncs the DT from Linux v6.8-rc1.
Remove udmap overrides and handle location change of chipid node.
Signed-off-by: Manorit Chawdhry
---
arch/arm/dts/k3-am68-sk-base-board.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/dts/k3-am68-sk-base-board.dts
Syncs the DT from Linux v6.8-rc1.
Remove udmap overrides and handle location change of chipid node.
Signed-off-by: Manorit Chawdhry
---
arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi | 18 +-
.../dts/k3-j721s2-common-proc-board-u-boot.dtsi| 18 +-
arch/arm/dts/k3-j721s2-main.dtsi
This series does the DT sync with Linux 6.8-rc1 as that has the pmic
nodes required for AVS support and then adds AVS Support for J721S2.
AVS Test for J721S2:
https://gist.github.com/manorit2001/d7690ded6ef685aa8ffa5b16746cc529
Boot Test results:
Previous addresses where used in past in emulation environment but never
gets to silicon that's why use correct addresses.
Signed-off-by: Michal Simek
---
include/configs/xilinx_versal_net.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
On 2/1/24 13:38, Michal Simek wrote:
fpga-full is not aligned with the latest dt-schema. Generic name
fpga-region should be used.
Signed-off-by: Michal Simek
---
Aligned with fpga-region dt schema
On 1/30/24 15:51, Michal Simek wrote:
kr260 revA/revA01 is using discrete oscilator for DP (27MHz) and si5332 for
other clocks but clocks are different compare to kv260 that's why fix it to
aligned with the latest schematics.
On the other handle kr260 revB/revA03 also contains 74.25 MHz
On 1/29/24 08:46, Michal Simek wrote:
Describe 25Mhz fixed oscilator which is providing clock for PL based
ethernet IPs. Physicially it is one chip but it is described as 2 fixed
clock to be aligned with other SOM versions which were using integrated
clock generators where clocks could be
On 1/26/24 09:09, Venkatesh Yadav Abbarapu wrote:
Adding a tiny bit more code for mini u-boot leads to a OCM
image overflow. Fix this by enabling LTO for this board, so that such
changes still can be made to the common U-Boot code.
Enable building mini u-boot image with LTO, which results in
On 1/26/24 09:11, Venkatesh Yadav Abbarapu wrote:
Adding a tiny bit more code for mini u-boot leads to a OCM
image overflow. Fix this by enabling LTO for this board, so that such
changes still can be made to the common U-Boot code.
Enable building mini u-boot image with LTO, which results in
On 1/26/24 08:24, Michal Simek wrote:
Board description describes the hard part of chip (PS) but programmable
logic (PL) part is not described in this file. But clocks on the board are
not only connected to PS but also wired to PL. And because two revisions
are available where revA is using
On 1/25/24 09:07, Michal Simek wrote:
From: Saeed Nowshadi
Without 'silabs,skip-recall' property, the driver on System Controller
re-calibrates the output clock frequency at probe() time based on the NVRAM
setting. This re-calibration causes a glitch on the output clock. At
power-on,
On 1/24/24 11:58, Michal Simek wrote:
Enable EFI_HTTP_BOOT to be able to booting OS via http.
In case of that dhcp server is not providing dns server IP set it up via
setenv dnsip .
Signed-off-by: Michal Simek
---
I am ignoring defconfig sync because it needs to done because of
On 1/23/24 05:57, Venkatesh Yadav Abbarapu wrote:
ID code is added for zu67dr_SE, zu11eg_SE, zu19eg_SE and zu47dr_SE
variants. SE is the select edition of restricted devices with the
capabilities.
Signed-off-by: Venkatesh Yadav Abbarapu
---
drivers/soc/soc_xilinx_zynqmp.c | 28
Prevent the error messages produced by which(1), such as the one quoted
below, from being visible in the build outputs.
which: no dtc in (./scripts/dtc)
This makes the build outputs look a tiny bit cleaner.
Signed-off-by: Dragan Simic
Reviewed-by: Quentin Schulz
---
Notes:
Version 2
On Tue, Feb 06, 2024 at 10:36:33AM +, Teresa Remmet wrote:
> Hello Benjamin,
>
>
> Am Mittwoch, dem 31.01.2024 um 09:45 +0100 schrieb Benjamin Hahn:
> > Signed-off-by: Benjamin Hahn
>
> please add a proper patch description. Adding only a subject line
> ist not enough.
>
One idea that I
On 2024-02-06 11:41, Quentin Schulz wrote:
On 2/6/24 11:37, Dragan Simic wrote:
On 2024-02-06 11:25, Quentin Schulz wrote:
On 2/6/24 04:56, Dragan Simic wrote:
Prevent the error messages produced by which(1), such as the one
quoted
below, from being visible in the build outputs.
which:
Hi Dragan,
On 2/6/24 11:37, Dragan Simic wrote:
[You don't often get email from dsi...@manjaro.org. Learn why this is
important at https://aka.ms/LearnAboutSenderIdentification ]
Hello Quentin,
On 2024-02-06 11:25, Quentin Schulz wrote:
On 2/6/24 04:56, Dragan Simic wrote:
Prevent the
Hello Quentin,
On 2024-02-06 11:25, Quentin Schulz wrote:
On 2/6/24 04:56, Dragan Simic wrote:
Prevent the error messages produced by which(1), such as the one
quoted
below, from being visible in the build outputs.
which: no dtc in (./scripts/dtc)
This makes the build outputs look a
Hello Benjamin,
Am Mittwoch, dem 31.01.2024 um 09:45 +0100 schrieb Benjamin Hahn:
> Signed-off-by: Benjamin Hahn
please add a proper patch description. Adding only a subject line
ist not enough.
Thanks,
Teresa
> ---
> arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 162
>
Hi Dragan,
On 2/6/24 04:56, Dragan Simic wrote:
[You don't often get email from dsi...@manjaro.org. Learn why this is important
at https://aka.ms/LearnAboutSenderIdentification ]
Prevent the error messages produced by which(1), such as the one quoted
below, from being visible in the build
Refactor common QoS code into a new common header file, and the soc
specific setup_qos functions into a common API.
Rename $(soc)_qos_count and $(soc)_qos_data variables to qos_count and
qos_data. When QoS settings of more SoCs are added, only one pair will
be defined at a time, based on the
Hi Tom,
On Tue, Feb 6, 2024 at 2:14 AM Tom Rini wrote:
>
> On Wed, Jan 31, 2024 at 02:14:26PM +, Weizhao Ouyang wrote:
>
> > The 'rng list' command probes all RNG devices and list those devices
> > that are successfully probed. Also update the help info.
> >
> > Reviewed-by: Heinrich
91 matches
Mail list logo